Contact information of Elsevier
Serial Information
Download restrictions: Full text for ScienceDirect subscribers only
Series handle: RePEc:eee:reensy
ISSN: 0951-8320
Citations RSS feed: at CitEc
Impact factors
Access and download statisticsTop item:
Corrections
All material on this site has been provided by the respective publishers and authors. You can help
correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy. See general information about how to correct material in RePEc.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .
Content
2015, Volume 138, Issue C
- 1-12 Integrated risk management of safety and development on transportation corridors
by Thekdi, Shital A. & Lambert, James H.
- 13-20 Assessing the reliability of components with micro- and nano-structures when they are part a multi-scale system
by Ebrahimi, Nader & Shehadeh, Mahmoud
- 21-30 A systematic framework to investigate the coverage of abnormal operating procedures in nuclear power plants
by Park, Jinkyun & Jung, Wondea
- 31-39 Imprecise inference for warranty contract analysis
by Utkin, Lev V. & Coolen, Frank P.A. & Gurov, Sergey V.
- 40-53 An effective approach to reducing strategy space for maintenance optimisation of multistate series–parallel systems
by Zhou, Yifan & Lin, Tian Ran & Sun, Yong & Bian, Yangqing & Ma, Lin
- 54-58 On the optimal degree of imperfect repair
by Finkelstein, Maxim
- 59-72 Quantification of margins and mixed uncertainties using evidence theory and stochastic expansions
by Shah, Harsheel & Hosder, Serhat & Winter, Tyler
- 73-81 A fault diagnosis system for interdependent critical infrastructures based on HMMs
by Ntalampiras, Stavros & Soupionis, Yannis & Giannopoulos, Georgios
- 82-92 Dynamic k-out-of-n system reliability with component partnership
by Coit, David W. & Chatwattanasiri, Nida & Wattanapongsakorn, Naruemon & Konak, Abdullah
- 93-104 Protection of warehouses and plants under capacity constraint
by Bricha, Naji & Nourelfath, Mustapha
- 105-114 MISTRAL: A game-theoretical model to allocate security measures in a multi-modal chemical transportation network with adaptive adversaries
by Talarico, Luca & Reniers, Genserik & Sörensen, Kenneth & Springael, Johan
- 115-134 Maritime transportation risk analysis: Review and analysis in light of some foundational issues
by Goerlandt, Floris & Montewka, Jakub
- 135-144 Importance analysis based on logical differential calculus and Binary Decision Diagram
by Zaitseva, Elena & Levashenko, Vitaly & Kostolny, Jozef
- 145-153 Enhancing product robustness in reliability-based design optimization
by Zhuang, Xiaotian & Pan, Rong & Du, Xiaoping
- 154-162 A recursive framework for time-dependent characteristics of tested and maintained standby units with arbitrary distributions for failures and repairs
by Vaurio, Jussi K.
- 163-175 Quantitative characterization of the reliability of simplex buses and stars to compare their benefits in fieldbuses
by Barranco, Manuel & Proenza, Julián & Almeida, LuÃs
- 176-193 Comparing the treatment of uncertainty in Bayesian networks and fuzzy expert systems used for a human reliability analysis application
by Baraldi, Piero & Podofillini, Luca & Mkrtchyan, Lusine & Zio, Enrico & Dang, Vinh N.
- 194-209 Integration of model verification, validation, and calibration for uncertainty quantification in engineering systems
by Sankararaman, Shankar & Mahadevan, Sankaran
- 210-218 Scientific computer simulation review
by Kaizer, Joshua S. & Heller, A. Kevin & Oberkampf, William L.
- 219-231 Hybrid PSO–SVM-based method for forecasting of the remaining useful life for aircraft engines and evaluation of its reliability
by GarcÃa Nieto, P.J. & GarcÃa-Gonzalo, E. & Sánchez Lasheras, F. & de Cos Juez, F.J.
- 232-241 Advanced surrogate model and sensitivity analysis methods for sodium fast reactor accident assessment
by Marrel, A. & Marie, N. & De Lozzo, M.
- 242-252 A dynamic discretization method for reliability inference in Dynamic Bayesian Networks
by Zhu, Jiandao & Collette, Matthew
- 253-262 Application of Bayesian nonparametric models to the uncertainty and sensitivity analysis of source term in a BWR severe accident
by Zheng, Xiaoyu & Itoh, Hiroto & Kawaguchi, Kenji & Tamaki, Hitoshi & Maruyama, Yu
- 263-272 Application of dynamic Bayesian network to risk analysis of domino effects in chemical infrastructures
by Khakzad, Nima
- 273-283 Failure mechanism dependence and reliability evaluation of non-repairable system
by Chen, Ying & Yang, Liu & Ye, Cui & Kang, Rui
2015, Volume 137, Issue C
- 1-5 Perspectives on risk and the unforeseen
by Haugen, Stein & Vinnem, Jan Erik
- 6-17 Quantitative assessment of disaster resilience: An empirical study on the importance of post-disaster recovery costs
by Yu, Soonyoung & Kim, Sung-Wook & Oh, Chang-Whan & An, Hyunuk & Kim, Jin-Man
- 18-28 Hazard identification for innovative LNG regasification technologies
by Paltrinieri, Nicola & Tugnoli, Alessandro & Cozzani, Valerio
- 29-39 Reliability-based decision making for selection of ready-mix concrete supply using stochastic superiority and inferiority ranking method
by Chou, Jui-Sheng & Ongkowijoyo, Citra Satria
- 40-49 First and second order approximate reliability analysis methods using evidence theory
by Zhang, Z. & Jiang, C. & Wang, G.G. & Han, X.
- 50-57 Two neural network based strategies for the detection of a total instantaneous blockage of a sodium-cooled fast reactor
by Martinez-Martinez, Sinuhe & Messai, Nadhir & Jeannot, Jean-Philippe & Nuzillard, Danielle
- 58-68 Vulnerability assessment and mitigation for the Chinese railway system under floods
by Hong, Liu & Ouyang, Min & Peeta, Srinivas & He, Xiaozheng & Yan, Yongze
- 76-86 An integrated production, inventory and preventive maintenance model for a multi-product production system
by Liu, Xuejuan & Wang, Wenbin & Peng, Rui
- 87-100 Regional and parametric sensitivity analysis of Sobol׳ indices
by Wei, Pengfei & Lu, Zhenzhou & Song, Jingwen
- 101-111 Software in military aviation and drone mishaps: Analysis and recommendations for the investigation process
by Foreman, Veronica L. & Favaró, Francesca M. & Saleh, Joseph H. & Johnson, Christopher W.
- 112-119 Achieving reasonable conservatism in nuclear safety analyses
by Jamali, Kamiar
- 120-128 Computing confidence and prediction intervals of industrial equipment degradation by bootstrapped support vector regression
by Lins, Isis Didier & Droguett, Enrique López & Moura, Márcio das Chagas & Zio, Enrico & Jacinto, Carlos Magno
- 129-140 EM algorithm for one-shot device testing with competing risks under exponential distribution
by Balakrishnan, N. & So, H.Y. & Ling, M.H.
2015, Volume 136, Issue C
- 1-7 A new cut-based algorithm for the multi-state flow network reliability problem
by Yeh, Wei-Chang & Bae, Changseok & Huang, Chia-Ling
- 8-16 Uncertainty and sensitivity analysis of radionuclide migration through the engineered barriers of deep geological repository: Case of RBMK-1500 SNF
by Narkuniene, Asta & Poskas, Povilas & Kilda, Raimondas & Bartkus, Gytis
- 17-34 A systems approach to risk management through leading safety indicators
by Leveson, Nancy
- 35-46 Target-oriented utility theory for modeling the deterrent effects of counterterrorism
by Bier, Vicki M. & Kosanoglu, Fuat
- 47-61 Risk assessment and risk-cost optimization of distributed power generation systems considering extreme weather conditions
by Rocchetta, R. & Li, Y.F. & Zio, E.
- 62-74 A multi-objective optimization problem for multi-state series-parallel systems: A two-stage flow-shop manufacturing system
by Azadeh, A. & Maleki Shoja, B. & Ghanei, S. & Sheikhalishahi, M.
- 75-84 Accelerated reliability demonstration under competing failure modes
by Luo, Wei & Zhang, Chun-hua & Chen, Xun & Tan, Yuan-yuan
- 85-91 Hidden Markov Models approach used for life parameters estimations
by Fort, A. & Mugnaini, M. & Vignoli, V.
- 92-100 Robust D-optimal designs under correlated error, applicable invariantly for some lifetime distributions
by Das, Rabindra Nath & Kim, Jinseog & Park, Jeong-Soo
- 101-108 Multiobjective planning of distribution networks incorporating switches and protective devices using a memetic optimization
by Pombo, A. Vieira & Murta-Pina, João & Pires, V. Fernão
- 109-119 Extended object-oriented Petri net model for mission reliability simulation of repairable PMS with common cause failures
by Wu, Xin-yang & Wu, Xiao-Yue
- 120-131 Supervision and prognosis architecture based on dynamical classification method for the predictive maintenance of dynamical evolving systems
by Traore, M. & Chammas, A. & Duviella, E.
- 132-139 A multiwavelet support vector regression method for efficient reliability assessment
by Dai, Hongzhe & Zhang, Boyi & Wang, Wei
- 140-144 Capacity loss and residual capacity in weighted k-out-of-n:G systems
by Eryilmaz, Serkan
- 145-156 Non-periodic preventive maintenance with reliability thresholds for complex repairable systems
by Lin, Zu-Liang & Huang, Yeu-Shiang & Fang, Chih-Chiang
2015, Volume 135, Issue C
- 1-8 Multiobjective robust design optimization of fatigue life for a truck cab
by Fang, Jianguang & Gao, Yunkai & Sun, Guangyong & Xu, Chengmin & Li, Qing
- 9-14 Alternative evacuation strategies for nuclear power accidents
by Hammond, Gregory D. & Bier, Vicki M.
- 15-26 Strengthening, modification and repair techniques’ prioritization for structural integrity control of ageing offshore structures
by Samarakoon, Samindi M.K. & Ratnayake, R.M. Chandima
- 27-33 Predictive inference for system reliability after common-cause component failures
by Coolen, Frank P.A. & Coolen-Maturi, Tahani
- 34-44 Integrated Markov-neural reliability computation method: A case for multiple automated guided vehicle system
by Fazlollahtabar, Hamed & Saidi-Mehrabad, Mohammad & Balakrishnan, Jaydeep
- 45-54 The capability concept – On how to define and describe capability in relation to risk, vulnerability and resilience
by Lindbom, Hanna & Tehler, Henrik & Eriksson, Kerstin & Aven, Terje
- 55-63 Analytical method for optimization of maintenance policy based on available system failure data
by Coria, V.H. & Maximov, S. & Rivas-Dávalos, F. & Melchor, C.L. & Guardado, J.L.
- 64-80 Integrating model checking with HiP-HOPS in model-based safety analysis
by Sharvia, Septavera & Papadopoulos, Yiannis
- 81-91 Three suggestions on the definition of terms for the safety and reliability analysis of digital systems
by Kim, Man Cheol & Smidts, Carol S.
- 92-99 RAMS data collection under Arctic conditions
by Barabadi, Abbas & Tobias Gudmestad, Ove & Barabady, Javad
- 100-106 Surveillance test and monitoring strategy for the availability improvement of standby equipment using age-dependent model
by Shin, Sung Min & Jeon, In Seop & Kang, Hyun Gook
- 107-124 PC analysis of stochastic differential equations driven by Wiener noise
by Le Maître, O.P. & Knio, O.M.
2015, Volume 134, Issue C
- 1-9 Simulation-based Bayesian optimal ALT designs for model discrimination
by Nasir, Ehab A. & Pan, Rong
- 10-18 Grit-mediated frictional ignition of a polymer-bonded explosive during oblique impacts: Probability calculations for safety engineering
by Heatwole, Eric & Parker, Gary & Holmes, Matt & Dickson, Peter
- 19-31 A particle filtering and kernel smoothing-based approach for new design component prognostics
by Hu, Yang & Baraldi, Piero & Di Maio, Francesco & Zio, Enrico
- 32-50 Safety and operational integrity evaluation and design optimization of safety instrumented systems
by Innal, Fares & Dutuit, Yves & Chebila, Mourad
- 51-58 Cost analysis of two-dimensional warranty for products with periodic preventive maintenance
by Huang, Yeu-Shiang & Gau, Wei-Yo & Ho, Jyh-Wen
- 59-65 Unobserved heterogeneity in the power law nonhomogeneous Poisson process
by Asfaw, Zeytu Gashaw & Lindqvist, Bo Henry
- 66-74 A Bayesian approach to modeling two-phase degradation using change-point regression
by Bae, Suk Joo & Yuan, Tao & Ning, Shuluo & Kuo, Way
- 75-82 Adaptive risk management using new risk perspectives – an example from the oil and gas industry
by Bjerga, Torbjørn & Aven, Terje
- 83-91 Implications of black swans to the foundations and practice of risk assessment and management
by Aven, Terje
- 92-97 Definition of a short-cut methodology for assessing the vulnerability of a territory in natural–technological risk estimation
by Marzo, E. & Busini, V. & Rota, R.
- 98-109 A condition-based maintenance of a dependent degradation-threshold-shock model in a system with multiple degradation processes
by Caballé, N.C. & Castro, I.T. & Pérez, C.J. & Lanza-Gutiérrez, J.M.
- 110-117 Sectional global sensitivity measures
by Pannier, S. & Graf, W.
- 118-125 Probability density function of the equivalent stress amplitude using statistical transformation
by Franko, Mitja & Nagode, Marko
- 126-133 Failure modeling of an electrical N-component framework by the non-stationary Markovian arrival process
by RodrÃguez, Joanna & Lillo, Rosa E. & RamÃrez-Cobo, Pepa
- 134-142 A method to improve cutset probability calculation in probabilistic safety assessment of nuclear power plants
by Jung, Woo Sik
- 143-156 Reliability analysis for preventive maintenance based on classical and Bayesian semi-parametric degradation approaches using locomotive wheel-sets as a case study
by Lin, Jing & Pulido, Julio & Asplund, Matthias
- 157-168 A dynamic Bayesian network based approach to safety decision support in tunnel construction
by Wu, Xianguo & Liu, Huitao & Zhang, Limao & Skibniewski, Miroslaw J. & Deng, Qianli & Teng, Jiaying
- 169-177 A reliability-based design concept for lithium-ion battery pack in electric vehicles
by Liu, Zhitao & Tan, CherMing & Leng, Feng
- 178-187 Evaluation and comparison of alternative fleet-level selective maintenance models
by Schneider, Kellie & Richard Cassady, C.
- 188-197 Improved metamodel-based importance sampling for the performance assessment of radioactive waste repositories
by Cadini, F. & Gioletta, A. & Zio, E.
- 198-207 Optimal maintenance policy and residual life estimation for a slowly degrading system subject to condition monitoring
by Tang, Diyin & Makis, Viliam & Jafari, Leila & Yu, Jinsong
- 208-217 Development of a cyber security risk model using Bayesian networks
by Shin, Jinsoo & Son, Hanseong & Khalil ur, Rahman & Heo, Gyunyoung
- 218-229 Comparing performance level estimation of safety functions in three distributed structures
by Hietikko, Marita & Malm, Timo & Saha, Heikki
- 230-238 An optimal age-based group maintenance policy for multi-unit degrading systems
by Shafiee, Mahmood & Finkelstein, Maxim
- 241-250 Computing derivative-based global sensitivity measures using polynomial chaos expansions
by Sudret, B. & Mai, C.V.
- 251-259 Application of the control variate technique to estimation of total sensitivity indices
by Kucherenko, S. & Delpuech, B. & Iooss, B. & Tarantola, S.
- 260-267 Sequential designs for sensitivity analysis of functional inputs in computer experiments
by Fruth, J. & Roustant, O. & Kuhnt, S.
- 268-275 Sensitivity analysis of complex models: Coping with dynamic and static inputs
by Anstett-Collin, F. & Goffart, J. & Mara, T. & Denis-Vidal, L.
- 276-286 Sensitivity analysis of groundwater lifetime expectancy to hydro-dispersive parameters: The case of ANDRA Meuse/Haute-Marne site
by Deman, G. & Kerrou, J. & Benabderrahmane, H. & Perrochet, P.
- 287-296 Sensitivity analysis of a final repository model with quasi-discrete behaviour using quasi-random sampling and a metamodel approach in comparison to other variance-based techniques
by Spiessl, Sabine M. & Becker, Dirk-A.
- 297-304 Robustness and sensitivity analysis in multiple criteria decision problems using rule learner techniques
by Rocco S., Claudio M. & Hernandez, Elvis
- 305-323 Bayesian quantification of thermodynamic uncertainties in dense gas flows
by Merle, X. & Cinnella, P.
- 324-333 Sensitivity Analysis of features in tolerancing based on constraint function level sets
by Ziegler, Philipp & Wartzack, Sandro
- 334-344 Combining screening and metamodel-based methods: An efficient sequential approach for the sensitivity analysis of model outputs
by Ge, Qiao & Ciuffo, Biagio & Menendez, Monica
2015, Volume 133, Issue C
- 1-10 Discrete and continuous reliability models for systems with identically distributed correlated components
by Fiondella, Lance & Xing, Liudong
- 11-21 Design of SCADA water resource management control center by a bi-objective redundancy allocation problem and particle swarm optimization
by Dolatshahi-Zand, Ali & Khalili-Damghani, Kaveh
- 22-32 A proactive condition-based maintenance strategy with both perfect and imperfect maintenance actions
by Do, Phuc & Voisin, Alexandre & Levrat, Eric & Iung, Benoit
- 33-47 An abnormal situation modeling method to assist operators in safety-critical systems
by Naderpour, Mohsen & Lu, Jie & Zhang, Guangquan
- 48-58 Markov analysis of redundant standby safety systems under periodic surveillance testing
by Hellmich, Mario & Berg, Heinz-Peter
- 59-67 Optimum maintenance strategy under uncertainty in the lifetime distribution
by de Jonge, Bram & Klingenberg, Warse & Teunter, Ruud & Tinga, Tiedo
- 68-78 Recommendations for the tuning of rare event probability estimators
by Balesdent, Mathieu & Morio, Jérôme & Marzat, Julien
- 79-86 Evidence-based quantification of uncertainties induced via simulation-based modeling
by Riley, Matthew E.
- 87-94 Experimental designs for autoregressive models applied to industrial maintenance
by Amo-Salas, M. & López-Fidalgo, J. & Pedregal, D.J.
- 95-105 Efficient analysis of multi-state k-out-of-n systems
by Mo, Yuchang & Xing, Liudong & Amari, Suprasad V. & Bechta Dugan, Joanne
- 106-118 Risk horoscopes: Predicting the number and type of serious occupational accidents in The Netherlands for sectors and jobs
by Bellamy, Linda J. & Damen, Martin & Jan Manuel, Henk & Aneziris, Olga N. & Papazoglou, Ioannis A. & Oh, Joy I.H.
- 119-136 Use of dynamic Bayesian networks for life extension assessment of ageing systems
by RamÃrez, Pedro A. Pérez & Utne, Ingrid Bouwer
- 137-145 Radiation Hardness Assurance for the JEM-EUSO Space Mission
by Prieto-Alfonso, H. & Del Peral, L. & Casolino, M. & Tsuno, K. & Ebisuzaki, T. & RodrÃguez FrÃas, M.D.
- 146-156 Comparing cultural profiles of MCR operators with those of non-MCR operators working in domestic Nuclear Power Plants
by Park, Jinkyun & Jung, Wondea
- 157-166 Characterizing and predicting the robustness of power-law networks
by LaRocca, Sarah & Guikema, Seth D.
- 167-175 Knowledge exchange and learning from failures in distributed environments: The role of contractor relationship management and work characteristics
by Gressgård, Leif Jarle & Hansen, Kåre
- 176-183 Product failure pattern analysis from warranty data using association rule and Weibull regression analysis: A case study
by Jeon, Jeasu & Sohn, So Young
- 184-191 Modeling and optimizing periodically inspected software rejuvenation policy based on geometric sequences
by Meng, Haining & Liu, Jianjun & Hei, Xinhong
- 192-202 An analytical model of electronic fault diagnosis on extension of the dependency theory
by Cui, Yiqian & Shi, Junyou & Wang, Zili
- 203-211 Braking system redundancy requirements for moving walks
by Rogova, Elena & Lodewijks, Gabriel
- 212-222 Switching Markov chains for a holistic modeling of SIS unavailability
by Mechri, Walid & Simon, Christophe & BenOthman, Kamel
- 223-236 Practical options for selecting data-driven or physics-based prognostics algorithms with reviews
by An, Dawn & Kim, Nam H. & Choi, Joo-Ho
- 237-245 A reliability model of a warm standby configuration with two identical sets of units
by Huang, Wei & Loman, James & Song, Thomas
- 246-252 Linear multistate consecutively-connected systems subject to a constrained number of gaps
by Levitin, Gregory & Xing, Liudong & Dai, Yuanshun
- 253-265 A Multi-Objective Genetic Algorithm for determining efficient Risk-Based Inspection programs
by Moura, Márcio das Chagas & Lins, Isis Didier & Droguett, Enrique López & Soares, Rodrigo Ferreira & Pascual, Rodrigo
- 266-274 An adaptive functional regression-based prognostic model for applications with missing data
by Fang, Xiaolei & Zhou, Rensheng & Gebraeel, Nagi
- 275-299 Analysis of information security reliability: A tutorial
by Kondakci, Suleyman
- 300-313 Method for evaluating an extended Fault Tree to analyse the dependability of complex systems: Application to a satellite-based railway system
by Nguyen, T.P. Khanh & Beugin, Julie & Marais, Juliette
- 314-322 Integrated assessment of failure probability of the district heating network
by ValinÄ ius, Mindaugas & ŽutautaitÄ—, Inga & Dundulis, Gintautas & RimkeviÄ ius, Sigitas & Janulionis, Remigijus & Bakas, Rimantas
- 323-333 An integrated model of statistical process control and maintenance based on the delayed monitoring
by Yin, Hui & Zhang, Guojun & Zhu, Haiping & Deng, Yuhao & He, Fei
2014, Volume 132, Issue C
- 1-8 A virtual experimental technique for data collection for a Bayesian network approach to human reliability analysis
by Musharraf, Mashrura & Bradbury-Squires, David & Khan, Faisal & Veitch, Brian & MacKinnon, Scott & Imtiaz, Syed
- 9-19 Mapping model validation metrics to subject matter expert scores for model adequacy assessment
by Teferra, Kirubel & Shields, Michael D. & Hapij, Adam & Daddazio, Raymond P.
- 20-35 Spacecraft early design validation using formal methods
by Bozzano, Marco & Cimatti, Alessandro & Katoen, Joost-Pieter & Katsaros, Panagiotis & Mokos, Konstantinos & Nguyen, Viet Yen & Noll, Thomas & Postma, Bart & Roveri, Marco
- 36-45 A novel method for SIL verification based on system degradation using reliability block diagram
by Ding, Long & Wang, Hong & Kang, Kai & Wang, Kai
- 46-59 Dynamic analysis and reliability assessment of structures with uncertain-but-bounded parameters under stochastic process excitations
by Do, Duy Minh & Gao, Wei & Song, Chongmin & Tangaramvong, Sawekchai
- 60-71 Controller recovery from equipment failures in air traffic control: A framework for the quantitative assessment of the recovery context
by Subotic, Branka & Schuster, Wolfgang & Majumdar, Arnab & Ochieng, Washington
- 72-82 A copula-based sampling method for data-driven prognostics
by Xi, Zhimin & Jing, Rong & Wang, Pingfeng & Hu, Chao
- 83-89 A value-based preventive maintenance policy for multi-component system with continuously degrading components
by Liu, Bin & Xu, Zhengguo & Xie, Min & Kuo, Way
- 90-96 Reliability analysis of repairable multi-state system with common bus performance sharing
by Yu, Huan & Yang, Jun & Mo, Huadong
- 97-106 Analyzing the reliability of shuffle-exchange networks using reliability block diagrams
by Bistouni, Fathollah & Jahanshahi, Mohsen
- 107-114 Efficient approach for reliability-based optimization based on weighted importance sampling approach
by Yuan, Xiukai & Lu, Zhenzhou
- 115-124 Reliability for systems of degrading components with distinct component shock sets
by Song, Sanling & Coit, David W. & Feng, Qianmei
- 125-145 Release of hazardous substances in flood events: Damage model for horizontal cylindrical vessels
by Landucci, Gabriele & Necci, Amos & Antonioni, Giacomo & Tugnoli, Alessandro & Cozzani, Valerio
- 146-153 Nonparametric predictive pairwise comparison with competing risks
by Coolen-Maturi, Tahani
- 154-162 Measuring the effectiveness of a near-miss management system: An application in an automotive firm supplier
by Andriulo, S. & Gnoni, M.G.
- 163-175 A new method for evaluating Borgonovo moment-independent importance measure with its application in an aircraft structure
by Zhang, Leigang & Lu, Zhenzhou & Cheng, Lei & Fan, Chongqing
- 176-185 Uncertainty propagation and sensitivity analysis in system reliability assessment via unscented transformation
by Rocco Sanseverino, Claudio M. & Ramirez-Marquez, José Emmanuel
- 186-195 A case study of remaining storage life prediction using stochastic filtering with the influence of condition monitoring
by Wang, Zhaoqiang & Hu, Changhua & Wang, Wenbin & Zhou, Zhijie & Si, Xiaosheng
- 196-206 Optimal reliability design for over-actuated systems based on the MIT rule: Application to an octocopter helicopter testbed
by Chamseddine, Abbas & Theilliol, Didier & Sadeghzadeh, Iman & Zhang, Youmin & Weber, Philippe
- 207-219 Scenario-based resilience assessment framework for critical infrastructure systems: Case study for seismic resilience of seaports
by Shafieezadeh, Abdollah & Ivey Burden, Lindsay
- 220-232 Automated synthesis of dependable mediators for heterogeneous interoperable systems
by Di Giandomenico, F. & Itria, M.L. & Masci, P. & Nostro, N.
- 233-249 Maintenance grouping strategy for multi-component systems with dynamic contexts
by Vu, Hai Canh & Do, Phuc & Barros, Anne & Bérenguer, Christophe
- 250-260 Relevance of control theory to design and maintenance problems in time-variant reliability: The case of stochastic viability
by Rougé, Charles & Mathias, Jean-Denis & Deffuant, Guillaume
- 261-273 Reliability assessment of power pole infrastructure incorporating deterioration and network maintenance
by Ryan, Paraic C. & Stewart, Mark G. & Spencer, Nathan & Li, Yue
2014, Volume 131, Issue C
- 1-13 IPICA_Lite—Improvements to root cause analysis
by Ferjencik, Milos
- 14-28 The construction of social identity in newly recruited nuclear engineering staff: A longitudinal study
by Nguyen, Lynda & Murphy, Glen & Chang, Artemis
- 29-39 Bayesian-network-based safety risk analysis in construction projects
by Zhang, Limao & Wu, Xianguo & Skibniewski, Miroslaw J. & Zhong, Jingbing & Lu, Yujie
- 40-52 Variable-fidelity model selection for stochastic simulation
by Mullins, Joshua & Mahadevan, Sankaran
- 53-60 Safety distance between underground natural gas and water pipeline facilities
by Mohsin, R. & Majid, Z.A. & Yusof, M.Z.
- 61-65 An algorithmic approach for the dynamic reliability analysis of non-repairable multi-state weighted k-out-of-n:G system
by Eryilmaz, Serkan & Rıza Bozbulut, Ali
- 66-82 Space-partition method for the variance-based sensitivity analysis: Optimal partition scheme and comparative study
by Zhai, Qingqing & Yang, Jun & Zhao, Yu
- 83-93 Choosing a heuristic and root node for edge ordering in BDD-based network reliability analysis
by Mo, Yuchang & Xing, Liudong & Zhong, Farong & Pan, Zhusheng & Chen, Zhongyu
- 94-101 Resilience of chemical industrial areas through attenuation-based security
by Reniers, G.L.L. & Sörensen, K. & Khan, F. & Amyotte, P.
- 102-108 A decision-making framework to integrate maintenance contract conditions with critical spares management
by Godoy, David R. & Pascual, Rodrigo & Knights, Peter
- 109-117 An improved adaptive kriging-based importance technique for sampling multiple failure regions of low probability
by Cadini, F. & Santos, F. & Zio, E.
- 118-125 Adversarial life testing: A Bayesian negotiation model
by Rufo, M.J. & MartÃn, J. & Pérez, C.J.
- 126-134 Statistical characteristics of serious network failures in Japan
by Uchida, Masato
- 135-147 Development and application of a living probabilistic safety assessment tool: Multi-objective multi-dimensional optimization of surveillance requirements in NPPs considering their ageing
by KanÄ ev, DuÅ¡ko & ÄŒepin, Marko & Gjorgiev, Blaže
- 148-165 Establishment of the optimal time interval between periodic inspections for redundant systems
by Alebrant Mendes, Angélica & Coit, David W. & Duarte Ribeiro, José Luis
- 166-174 The validation of evacuation simulation models through the analysis of behavioural uncertainty
by Lovreglio, Ruggiero & Ronchi, Enrico & Borri, Dino
- 175-184 Explicit and implicit methods for probabilistic common-cause failure analysis
by Wang, Chaonan & Xing, Liudong & Levitin, Gregory
- 185-196 Extra-capacity versus protection for supply networks under attack
by Bricha, Naji & Nourelfath, Mustapha
- 197-202 A systems perspective on the unstable approach in commercial aviation
by Moriarty, David & Jarvis, Steve
- 203-215 Joint optimal inspection and inventory for a k-out-of-n system
by Bjarnason, Erik T.S. & Taghipour, Sharareh & Banjevic, Dragan
- 216-227 Estimation of the inverse Weibull distribution based on progressively censored data: Comparative study
by Musleh, Rola M. & Helu, Amal
- 229-235 Detecting cracks in aircraft engine fan blades using vibrothermography nondestructive evaluation
by Gao, Chunwang & Meeker, William Q. & Mayton, Donna
- 236-241 Reliability assessment based on degradation measurements: How to compare some models?
by Baussaron, Julien & Mihaela, Barreau & Léo, Gerville-Réache & Fabrice, Guérin & Paul, Schimmerling
- 242-250 Optimal number of tests to achieve and validate product reliability
by Ahmed, Hussam & Chateauneuf, Alaa
- 251-256 Optimal design of accelerated life tests for an extension of the exponential distribution
by Haghighi, Firoozeh
- 257-270 Time-variant flexural reliability of RC beams with externally bonded CFRP under combined fatigue-corrosion actions
by Bigaud, David & Ali, Osama
- 271-281 Repairable system analysis in presence of covariates and random effects
by Giorgio, M. & Guida, M. & Pulcini, G.
- 282-290 Reliability of maintained systems under a semi-Markov setting
by Malefaki, Sonia & Limnios, Nikolaos & Dersin, Pierre
- 291-297 On selection of optimal stochastic model for accelerated life testing
by Volf, P. & Timková, J.
- 298-304 Nonparametric predictive inference for reliability of a k-out-of-m:G system with multiple component types
by Aboalkhair, Ahmad M. & Coolen, Frank P.A. & MacPhee, Iain M.
2014, Volume 130, Issue C
- 1-11 Bayesian Belief Networks for predicting drinking water distribution system pipe breaks
by Francis, Royce A. & Guikema, Seth D. & Henneman, Lucas
- 12-26 A combined sensitivity analysis and kriging surrogate modeling for early validation of health indicators
by Lamoureux, Benjamin & Mechbal, Nazih & Massé, Jean-Rémi
- 27-32 Reliability growth by failure mode removal
by Gaver, Donald P. & Jacobs, Patricia A.
- 33-41 Cost modelling in maintenance strategy optimisation for infrastructure assets with limited data
by Zhang, Wenjuan & Wang, Wenbin
- 42-49 Modeling automotive safety mechanisms: A Markovian approach
by Cherfi, Abraham & Leeman, Michel & Meurville, Florent & Rauzy, Antoine
- 50-60 Hazard rate function in dynamic environment
by XiaoFei, Lu & Min, Liu
- 61-68 A conservative bound for the probability of failure of a 1-out-of-2 protection system with one hardware-only and one software-based protection train
by Bishop, Peter & Bloomfield, Robin & Littlewood, Bev & Popov, Peter & Povyakalo, Andrey & Strigini, Lorenzo
- 69-75 A redundant n-system under shocks and repairs following Markovian arrival processes
by Montoro-Cazorla, Delia & Pérez-Ocón, Rafael
- 76-84 A stochastic model for railway track asset management
by Andrews, John & Prescott, Darren & De Rozières, Florian
- 85-94 Optimal connecting elements allocation in linear consecutively-connected systems with phased mission and common cause failures
by Levitin, Gregory & Xing, Liudong & Yu, Shengji
- 95-105 Assessment of lightning impact frequency for process equipment
by Necci, Amos & Antonioni, Giacomo & Cozzani, Valerio & Krausmann, Elisabeth & Borghetti, Alberto & Nucci, Carlo Alberto
- 106-114 A pragmatic mapping of factors behind deviating acts in aircraft maintenance
by Tsagkas, Vassilis & Nathanael, Dimitris & Marmaras, Nicolas
- 115-124 Asymptotic optimality of RESTART estimators in highly dependable systems
by Villén-Altamirano, J.
- 125-131 Application of subset simulation in reliability estimation of underground pipelines
by Tee, Kong Fah & Khan, Lutfor Rahman & Li, Hongshuang
- 132-139 Reliability optimization of series–parallel systems with mixed redundancy strategy in subsystems
by Abouei Ardakan, Mostafa & Zeinal Hamadani, Ali
Printed from https://ideas.repec.org/s/eee/reensy23.html
