IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v157y2017icp177-191.html
   My bibliography  Save this article

A simulation-based optimization approach for free distributed repairable multi-state availability-redundancy allocation problems

Author

Listed:
  • Attar, Ahmad
  • Raissi, Sadigh
  • Khalili-Damghani, Kaveh

Abstract

A simulation-based optimization (SBO) method is proposed to handle multi-objective joint availability-redundancy allocation problem (JARAP). Here, there is no emphasis on probability distributions of time to failures and repair times for multi-state multi-component series-parallel configuration under active, cold and hot standby strategies. Under such conditions, estimation of availability is not a trivial task. First, an efficient computer simulation model is proposed to estimate the availability of the aforementioned system. Then, the estimated availability values are used in a repetitive manner as parameter of a two-objective joint availability-redundancy allocation optimization model through SBO mechanism. The optimization model is then solved using two well-known multi-objective evolutionary computation algorithms, i.e., non-dominated sorting genetic algorithm (NSGA-II), and Strength Pareto Evolutionary Algorithm (SPEA2). The proposed SBO approach is tested using non-exponential numerical example with multi-state repairable components. The results are presented and discussed through different demand scenarios under cold and hot standby strategies. Furthermore, performance of NSGA-II and SPEA2 are statistically compared regarding multi-objective accuracy, and diversity metrics.

Suggested Citation

  • Attar, Ahmad & Raissi, Sadigh & Khalili-Damghani, Kaveh, 2017. "A simulation-based optimization approach for free distributed repairable multi-state availability-redundancy allocation problems," Reliability Engineering and System Safety, Elsevier, vol. 157(C), pages 177-191.
    • Handle: RePEc:eee:reensy:v:157:y:2017:i:c:p:177-191
    DOI: 10.1016/j.ress.2016.09.006
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832016305142
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2016.09.006?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Tian, Zhigang & Zuo, Ming J., 2006. "Redundancy allocation for multi-state systems using physical programming and genetic algorithms," Reliability Engineering and System Safety, Elsevier, vol. 91(9), pages 1049-1056.
    2. Safari, Jalal, 2012. "Multi-objective reliability optimization of series-parallel systems with a choice of redundancy strategies," Reliability Engineering and System Safety, Elsevier, vol. 108(C), pages 10-20.
    3. Tavakkoli-Moghaddam, R. & Safari, J. & Sassani, F., 2008. "Reliability optimization of series-parallel systems with a choice of redundancy strategies using a genetic algorithm," Reliability Engineering and System Safety, Elsevier, vol. 93(4), pages 550-556.
    4. Dolatshahi-Zand, Ali & Khalili-Damghani, Kaveh, 2015. "Design of SCADA water resource management control center by a bi-objective redundancy allocation problem and particle swarm optimization," Reliability Engineering and System Safety, Elsevier, vol. 133(C), pages 11-21.
    5. Alexey A. Lifshits & Sergey M. Avdoshin, 2016. "Algorithms for Project Portfolio Selection Based on Fuzzy Multi-objective Model," Progress in IS, in: Jörg Becker & Oleg Kozyrev & Eduard Babkin & Victor Taratukhin & Natalia Aseeva (ed.), Emerging Trends in Information Systems, pages 65-77, Springer.
    6. Hong-Zhong Huang & Jian Qu & Ming Zuo, 2009. "Genetic-algorithm-based optimal apportionment of reliability and redundancy under multiple objectives," IISE Transactions, Taylor & Francis Journals, vol. 41(4), pages 287-298.
    7. Khalili-Damghani, Kaveh & Amiri, Maghsoud, 2012. "Solving binary-state multi-objective reliability redundancy allocation series-parallel problem using efficient epsilon-constraint, multi-start partial bound enumeration algorithm, and DEA," Reliability Engineering and System Safety, Elsevier, vol. 103(C), pages 35-44.
    8. Khalili-Damghani, Kaveh & Abtahi, Amir-Reza & Tavana, Madjid, 2013. "A new multi-objective particle swarm optimization method for solving reliability redundancy allocation problems," Reliability Engineering and System Safety, Elsevier, vol. 111(C), pages 58-75.
    9. Salazar, Daniel & Rocco, Claudio M. & Galván, Blas J., 2006. "Optimization of constrained multiple-objective reliability problems using evolutionary algorithms," Reliability Engineering and System Safety, Elsevier, vol. 91(9), pages 1057-1070.
    10. Toshio Nakagawa, 2008. "Advanced Reliability Models and Maintenance Policies," Springer Series in Reliability Engineering, Springer, number 978-1-84800-294-4, February.
    11. Coelho, Leandro dos Santos, 2009. "An efficient particle swarm approach for mixed-integer programming in reliability–redundancy optimization applications," Reliability Engineering and System Safety, Elsevier, vol. 94(4), pages 830-837.
    12. Li, Chun-yang & Chen, Xun & Yi, Xiao-shan & Tao, Jun-yong, 2010. "Heterogeneous redundancy optimization for multi-state series–parallel systems subject to common cause failures," Reliability Engineering and System Safety, Elsevier, vol. 95(3), pages 202-207.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Behzad Karimi & Seyed Taghi Akhavan Niaki & Seyyed Masih Miriha & Mahsa Ghare Hasanluo & Shima Javanmard, 2019. "A weighted K-means clustering approach to solve the redundancy allocation problem of systems having components with different failures," Journal of Risk and Reliability, , vol. 233(6), pages 925-942, December.
    2. Zhang, Hanxiao & Li, Yan-Fu, 2022. "Robust optimization on redundancy allocation problems in multi-state and continuous-state series–parallel systems," Reliability Engineering and System Safety, Elsevier, vol. 218(PA).
    3. Khaled Guerraiche & Latifa Dekhici & Eric Chatelet & Abdelkader Zeblah, 2023. "Techno-Economic Green Optimization of Electrical Microgrid Using Swarm Metaheuristics," Energies, MDPI, vol. 16(4), pages 1-19, February.
    4. Li, Yan-Fu & Zhang, Hanxiao, 2022. "The methods for exactly solving redundancy allocation optimization for multi-state series–parallel systems," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    5. Zaretalab, Arash & Sharifi, Mani & Guilani, Pedram Pourkarim & Taghipour, Sharareh & Niaki, Seyed Taghi Akhavan, 2022. "A multi-objective model for optimizing the redundancy allocation, component supplier selection, and reliable activities for multi-state systems," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    6. Sabri-Laghaie, Kamyar & Karimi-Nasab, Mehdi, 2019. "Random search algorithms for redundancy allocation problem of a queuing system with maintenance considerations," Reliability Engineering and System Safety, Elsevier, vol. 185(C), pages 144-162.
    7. de Paula, Cassio Pereira & Visnadi, Lais Bittencourt & de Castro, Helio Fiori, 2019. "Multi-objective optimization in redundant system considering load sharing," Reliability Engineering and System Safety, Elsevier, vol. 181(C), pages 17-27.
    8. Ardakan, Mostafa Abouei & Amini, Hanieh & Juybari, Mohammad N., 2022. "Prescheduled switching time: A new strategy for systems with standby components," Reliability Engineering and System Safety, Elsevier, vol. 218(PB).
    9. Abouei Ardakan, Mostafa & Rezvan, Mohammad Taghi, 2018. "Multi-objective optimization of reliability–redundancy allocation problem with cold-standby strategy using NSGA-II," Reliability Engineering and System Safety, Elsevier, vol. 172(C), pages 225-238.
    10. Sharifi, Mani & Taghipour, Sharareh, 2024. "Redundancy allocation problem with a mix of components for a multi-state system and continuous performance level components," Reliability Engineering and System Safety, Elsevier, vol. 241(C).
    11. Milia Habib & Farouk Yalaoui & Hicham Chehade & Iman Jarkass & Nazir Chebbo, 2017. "Multi-objective design optimisation of repairable -out-of- subsystems in series with redundant dependency," International Journal of Production Research, Taylor & Francis Journals, vol. 55(23), pages 7000-7021, December.
    12. Zhang, Hanxiao & Sun, Muxia & Li, Yan-Fu, 2022. "Reliability–redundancy allocation problem in multi-state flow network: Minimal cut-based approximation scheme," Reliability Engineering and System Safety, Elsevier, vol. 225(C).
    13. Du, Mengyu & Li, Yan-Fu, 2020. "An investigation of new local search strategies in memetic algorithm for redundancy allocation in multi-state series-parallel systems," Reliability Engineering and System Safety, Elsevier, vol. 195(C).
    14. Behzad Karimi & Seyed Taghi Akhavan Niaki & Amir Hossein Niknamfar & Mahsa Gareh Hassanlu, 2021. "Multi-objective optimization of job shops with automated guided vehicles: A non-dominated sorting cuckoo search algorithm," Journal of Risk and Reliability, , vol. 235(2), pages 306-328, April.
    15. Kiril Tenekedjiev & Simon Cooley & Boyan Mednikarov & Guixin Fan & Natalia Nikolova, 2021. "Reliability Simulation of Two Component Warm-Standby System with Repair, Switching, and Back-Switching Failures under Three Aging Assumptions," Mathematics, MDPI, vol. 9(20), pages 1-40, October.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kong, Xiangyong & Gao, Liqun & Ouyang, Haibin & Li, Steven, 2015. "Solving the redundancy allocation problem with multiple strategy choices using a new simplified particle swarm optimization," Reliability Engineering and System Safety, Elsevier, vol. 144(C), pages 147-158.
    2. Andrés Cacereño & David Greiner & Blas J. Galván, 2021. "Multi-Objective Optimum Design and Maintenance of Safety Systems: An In-Depth Comparison Study Including Encoding and Scheduling Aspects with NSGA-II," Mathematics, MDPI, vol. 9(15), pages 1-39, July.
    3. Gholinezhad, Hadi & Zeinal Hamadani, Ali, 2017. "A new model for the redundancy allocation problem with component mixing and mixed redundancy strategy," Reliability Engineering and System Safety, Elsevier, vol. 164(C), pages 66-73.
    4. Kayedpour, Farjam & Amiri, Maghsoud & Rafizadeh, Mahmoud & Shahryari Nia, Arash, 2017. "Multi-objective redundancy allocation problem for a system with repairable components considering instantaneous availability and strategy selection," Reliability Engineering and System Safety, Elsevier, vol. 160(C), pages 11-20.
    5. Mohammad N. Juybari & Pardis Pourkarim Guilani & Mostafa Abouei Ardakan, 2022. "Bi-objective sequence optimization in reliability problems with a matrix-analytic approach," Annals of Operations Research, Springer, vol. 312(1), pages 275-304, May.
    6. Jiangbin Zhao & Shubin Si & Zhiqiang Cai & Ming Su & Wei Wang, 2019. "Multiobjective optimization of reliability–redundancy allocation problems for serial parallel-series systems based on importance measure," Journal of Risk and Reliability, , vol. 233(5), pages 881-897, October.
    7. Zhang, Enze & Wu, Yifei & Chen, Qingwei, 2014. "A practical approach for solving multi-objective reliability redundancy allocation problems using extended bare-bones particle swarm optimization," Reliability Engineering and System Safety, Elsevier, vol. 127(C), pages 65-76.
    8. Dobani, Ehsan Ramezani & Ardakan, Mostafa Abouei & Davari-Ardakani, Hamed & Juybari, Mohammad N., 2019. "RRAP-CM: A new reliability-redundancy allocation problem with heterogeneous components," Reliability Engineering and System Safety, Elsevier, vol. 191(C).
    9. Hadipour, Hassan & Amiri, Maghsoud & Sharifi, Mani, 2019. "Redundancy allocation in series-parallel systems under warm standby and active components in repairable subsystems," Reliability Engineering and System Safety, Elsevier, vol. 192(C).
    10. Zhang, Enze & Chen, Qingwei, 2016. "Multi-objective reliability redundancy allocation in an interval environment using particle swarm optimization," Reliability Engineering and System Safety, Elsevier, vol. 145(C), pages 83-92.
    11. Guilani, Pedram Pourkarim & Azimi, Parham & Niaki, S.T.A. & Niaki, Seyed Armin Akhavan, 2016. "Redundancy allocation problem of a system with increasing failure rates of components based on Weibull distribution: A simulation-based optimization approach," Reliability Engineering and System Safety, Elsevier, vol. 152(C), pages 187-196.
    12. Behzad Karimi & Seyed Taghi Akhavan Niaki & Seyyed Masih Miriha & Mahsa Ghare Hasanluo & Shima Javanmard, 2019. "A weighted K-means clustering approach to solve the redundancy allocation problem of systems having components with different failures," Journal of Risk and Reliability, , vol. 233(6), pages 925-942, December.
    13. Pradip Kundu, 2021. "A multi-objective reliability-redundancy allocation problem with active redundancy and interval type-2 fuzzy parameters," Operational Research, Springer, vol. 21(4), pages 2433-2458, December.
    14. Feizabadi, Mohammad & Jahromi, Abdolhamid Eshraghniaye, 2017. "A new model for reliability optimization of series-parallel systems with non-homogeneous components," Reliability Engineering and System Safety, Elsevier, vol. 157(C), pages 101-112.
    15. Vahid Baradaran & Amir Hossein Hosseinian, 2020. "A bi-objective model for redundancy allocation problem in designing server farms: mathematical formulation and solution approaches," International Journal of System Assurance Engineering and Management, Springer;The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden, vol. 11(5), pages 935-952, October.
    16. Zaretalab, Arash & Sharifi, Mani & Guilani, Pedram Pourkarim & Taghipour, Sharareh & Niaki, Seyed Taghi Akhavan, 2022. "A multi-objective model for optimizing the redundancy allocation, component supplier selection, and reliable activities for multi-state systems," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    17. Cao, Dingzhou & Murat, Alper & Chinnam, Ratna Babu, 2013. "Efficient exact optimization of multi-objective redundancy allocation problems in series-parallel systems," Reliability Engineering and System Safety, Elsevier, vol. 111(C), pages 154-163.
    18. Li, Zhaojun & Liao, Haitao & Coit, David W., 2009. "A two-stage approach for multi-objective decision making with applications to system reliability optimization," Reliability Engineering and System Safety, Elsevier, vol. 94(10), pages 1585-1592.
    19. Bosse, Sascha & Splieth, Matthias & Turowski, Klaus, 2016. "Multi-objective optimization of IT service availability and costs," Reliability Engineering and System Safety, Elsevier, vol. 147(C), pages 142-155.
    20. Safari, Jalal, 2012. "Multi-objective reliability optimization of series-parallel systems with a choice of redundancy strategies," Reliability Engineering and System Safety, Elsevier, vol. 108(C), pages 10-20.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:157:y:2017:i:c:p:177-191. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.