Contact information of Elsevier
Corrections
All material on this site has been provided by the respective publishers and authors. You can help
correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene. See general information about how to correct material in RePEc.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .
Content
2014, Volume 113, Issue C
- 1134-1140 Investigation of sulfur chemistry with acid gas addition in hydrogen/air flames
by Selim, H. & Ibrahim, S. & Al Shoaibi, A. & Gupta, A.K.
- 1141-1148 Deposition of SiO2 nanoparticles in heat exchanger during combustion of biogas
by Turkin, A.A. & Dutka, M. & Vainchtein, D. & Gersen, S. & van Essen, V.M. & Visser, P. & Mokhov, A.V. & Levinsky, H.B. & De Hosson, J.Th.M.
- 1149-1154 Maximizing the temperature span of a solid state active magnetic regenerative refrigerator
by Silva, D.J. & Ventura, J. & Araújo, J.P. & Pereira, A.M.
- 1155-1161 Outdoor and diurnal performance of large conformal flexible metal/plastic dye solar cells
by Zardetto, V. & Mincuzzi, G. & De Rossi, F. & Di Giacomo, F. & Reale, A. & Di Carlo, A. & Brown, T.M.
- 1162-1170 Integration of PV and BES units in commercial distribution systems considering energy loss and voltage stability
by Hung, Duong Quoc & Mithulananthan, N. & Bansal, R.C.
- 1171-1187 Combined gas and electricity network expansion planning
by Chaudry, Modassar & Jenkins, Nick & Qadrdan, Meysam & Wu, Jianzhong
- 1188-1198 Parametric and working fluid analysis of a dual-loop organic Rankine cycle (DORC) used in engine waste heat recovery
by Shu, Gequn & Liu, Lina & Tian, Hua & Wei, Haiqiao & Yu, Guopeng
- 1199-1215 Simulation of CO and NO emissions in a SI engine using a 0D coherent flame model coupled with a tabulated chemistry approach
by Bougrine, S. & Richard, S. & Michel, J.-B. & Veynante, D.
- 1216-1219 Efficiency of clouds on shortwave radiation using experimental data
by Mateos, D. & Antón, M. & Valenzuela, A. & Cazorla, A. & Olmo, F.J. & Alados-Arboledas, L.
- 1220-1234 Carbon constrained design of energy infrastructure for new build schemes
by Rees, M.T. & Wu, J. & Jenkins, N. & Abeysekera, M.
- 1235-1243 Economic evaluation of a novel fuel-saver hybrid combining a solar receiver with a combustor for a solar power tower
by Nathan, G.J. & Battye, D.L. & Ashman, P.J.
- 1244-1251 Dynamic study of adsorbers by a new gravimetric version of the Large Temperature Jump method
by Sapienza, Alessio & Santamaria, Salvatore & Frazzica, Andrea & Freni, Angelo & Aristov, Yuri I.
- 1252-1260 Optimal placement of distributed generations considering voltage stability and power losses with observing voltage-related constraints
by Esmaili, Masoud & Firozjaee, Esmail Chaktan & Shayanfar, Heidar Ali
- 1261-1268 Experimental characterization of a solid industrial by-product as material for high temperature sensible thermal energy storage (TES)
by Miró, Laia & Navarro, M. Elena & Suresh, Priyamvadha & Gil, Antoni & Fernández, A. Inés & Cabeza, Luisa F.
- 1269-1282 CO2 adsorption on fine activated carbon in a sound assisted fluidized bed: Effect of sound intensity and frequency, CO2 partial pressure and fluidization velocity
by Raganati, F. & Ammendola, P. & Chirone, R.
- 1283-1292 Health external costs associated to the integration of solid oxide fuel cell in a sugar–ethanol factory
by Casas-Ledon, Yannay & Arteaga-Perez, Luis E. & Dewulf, Jo & Morales, Mayra C. & Rosa, Elena & Peralta-Suáreza, Luis M. & Van Langenhove, Herman
- 1293-1300 Structure optimization and performance experiments of a solar-powered finned-tube adsorption refrigeration system
by Ji, Xu & Li, Ming & Fan, Jieqing & Zhang, Peng & Luo, Bin & Wang, Liuling
- 1301-1314 Thermodynamic and economic analysis of polygeneration system integrating atmospheric pressure coal pyrolysis technology with circulating fluidized bed power plant
by Guo, Zhihang & Wang, Qinhui & Fang, Mengxiang & Luo, Zhongyang & Cen, Kefa
- 1315-1322 Preparation and characterization of fuel pellets from woody biomass, agro-residues and their corresponding hydrochars
by Liu, Zhengang & Quek, Augustine & Balasubramanian, R.
- 1323-1337 Analysis of corporate average fuel economy regulation compliance scenarios inclusive of plug in hybrid vehicles
by Al-Alawi, Baha M. & Bradley, Thomas H.
- 1338-1348 Modeling direct steam generation in solar collectors with multiphase CFD
by Lobón, David H. & Baglietto, Emilio & Valenzuela, Loreto & Zarza, Eduardo
- 1349-1362 Design and optimization of a solar air heater with offset strip fin absorber plate
by Yang, Ming & Yang, Xudong & Li, Xing & Wang, Zhifeng & Wang, Pengsu
- 1363-1371 The impact of concrete structure on the thermal performance of the dual-media thermocline thermal storage tank using concrete as the solid medium
by Wu, Ming & Li, Mingjia & Xu, Chao & He, Yaling & Tao, Wenquan
- 1372-1381 Application of fault tree approach for technical assessment of small-sized biogas systems in Nepal
by Cheng, Shikun & Li, Zifu & Mang, Heinz-Peter & Neupane, Kalidas & Wauthelet, Marc & Huba, Elisabeth-Maria
- 1382-1396 Benchmarking energy consumption for dump trucks in mines
by Sahoo, Lalit Kumar & Bandyopadhyay, Santanu & Banerjee, Rangan
- 1397-1404 Upgrading and extraction of bitumen from Nigerian tar sand by supercritical carbon dioxide
by Rudyk, Svetlana & Spirov, Pavel
- 1405-1420 Advances in exergy analysis: a novel assessment of the Extended Exergy Accounting method
by Rocco, M.V. & Colombo, E. & Sciubba, E.
- 1421-1433 A data-driven based adaptive state of charge estimator of lithium-ion polymer battery used in electric vehicles
by Xiong, Rui & Sun, Fengchun & Gong, Xianzhi & Gao, Chenchen
- 1434-1445 Adding value with CLEWS – Modelling the energy system and its interdependencies for Mauritius
by Welsch, M. & Hermann, S. & Howells, M. & Rogner, H.H. & Young, C. & Ramma, I. & Bazilian, M. & Fischer, G. & Alfstad, T. & Gielen, D. & Le Blanc, D. & Röhrl, A. & Steduto, P. & Müller, A.
- 1446-1460 Analysis of a latent thermocline storage system with encapsulated phase change materials for concentrating solar power
by Nithyanandam, K. & Pitchumani, R. & Mathur, A.
- 1461-1474 Power generation plants with carbon capture and storage: A techno-economic comparison between coal combustion and gasification technologies
by Tola, Vittorio & Pettinau, Alberto
- 1475-1483 Optimal scheduling for enhanced coal bed methane production through CO2 injection
by Huang, Yuping & Zheng, Qipeng P. & Fan, Neng & Aminian, Kashy
- 1484-1489 Effect of LED lighting on the cooling and heating loads in office buildings
by Ahn, Byung-Lip & Jang, Cheol-Yong & Leigh, Seung-Bok & Yoo, Seunghwan & Jeong, Hakgeun
- 1490-1495 Design and operation of a 1MWth chemical looping plant
by Ströhle, Jochen & Orth, Matthias & Epple, Bernd
- 1496-1511 Spectral characterisation and long-term performance analysis of various commercial Heat Transfer Fluids (HTF) as Direct-Absorption Filters for CPV-T beam-splitting applications
by Looser, R. & Vivar, M. & Everett, V.
- 1512-1518 Supercooling suppression of microencapsulated phase change materials by optimizing shell composition and structure
by Cao, Fangyu & Yang, Bao
- 1519-1524 Implementation and evaluation for anode purging of a fuel cell based on nitrogen concentration
by Chen, Yong-Song & Yang, Chih-Wei & Lee, Jiunn-Yih
- 1525-1561 A review of phase change materials for vehicle component thermal buffering
by Jankowski, Nicholas R. & McCluskey, F. Patrick
- 1562-1574 Performance analysis of a two-stage desiccant cooling system
by Tu, Rang & Liu, Xiao-Hua & Jiang, Yi
- 1575-1585 Lithium iron phosphate based battery – Assessment of the aging parameters and development of cycle life model
by Omar, Noshin & Monem, Mohamed Abdel & Firouz, Yousef & Salminen, Justin & Smekens, Jelle & Hegazy, Omar & Gaulous, Hamid & Mulder, Grietus & Van den Bossche, Peter & Coosemans, Thierry & Van Mierlo, Joeri
- 1586-1595 The impact of scheduling appliances and rate structure on bill savings for net-zero energy communities: Application to West Village
by Gaiser, Kyle & Stroeve, Pieter
- 1596-1600 Kinetic study on the liquefaction of wood and its three cell wall component in polyhydric alcohols
by Zhang, Hairong & Yang, Huijuan & Guo, Haijun & Huang, Chao & Xiong, Lian & Chen, Xinde
- 1601-1613 An Integrated GIS, optimization and simulation framework for optimal PV size and location in campus area environments
by Kucuksari, Sadik & Khaleghi, Amirreza M. & Hamidi, Maryam & Zhang, Ye & Szidarovszky, Ferenc & Bayraksan, Guzin & Son, Young-Jun
- 1614-1631 Biotechnological preparation of biodiesel and its high-valued derivatives: A review
by Yan, Yunjun & Li, Xiang & Wang, Guilong & Gui, Xiaohua & Li, Guanlin & Su, Feng & Wang, Xiaofeng & Liu, Tao
- 1632-1644 The carbon footprint and non-renewable energy demand of algae-derived biodiesel
by Azadi, Pooya & Brownbridge, George & Mosbach, Sebastian & Smallbone, Andrew & Bhave, Amit & Inderwildi, Oliver & Kraft, Markus
- 1645-1655 Real-world fuel consumption and CO2 emissions of urban public buses in Beijing
by Zhang, Shaojun & Wu, Ye & Liu, Huan & Huang, Ruikun & Yang, Liuhanzi & Li, Zhenhua & Fu, Lixin & Hao, Jiming
- 1656-1666 Optimal sizing, operating strategy and operational experience of a stand-alone microgrid on Dongfushan Island
by Zhao, Bo & Zhang, Xuesong & Li, Peng & Wang, Ke & Xue, Meidong & Wang, Caisheng
- 1667-1674 Continuous operation characteristics of chemical looping hydrogen production system
by Cho, Won Chul & Lee, Do Yeon & Seo, Myung Won & Kim, Sang Done & Kang, KyoungSoo & Bae, Ki Kwang & Kim, Change Hee & Jeong, SeongUk & Park, Chu Sik
- 1675-1685 A three-dimensional model for thermal analysis in a vanadium flow battery
by Zheng, Qiong & Zhang, Huamin & Xing, Feng & Ma, Xiangkun & Li, Xianfeng & Ning, Guiling
- 1686-1691 Simulation of an electric transportation system at The Ohio State University
by De Filippo, Giovanni & Marano, Vincenzo & Sioshansi, Ramteen
- 1692-1699 Synergetic mechanism of methanol–steam reforming reaction in a catalytic reactor with electric discharges
by Kim, Taegyu & Jo, Sungkwon & Song, Young-Hoon & Lee, Dae Hoon
- 1700-1709 Deriving cooperative biomass resource transport supply strategies in meeting co-firing energy regulations: A case for peat and wood fibre in Ireland
by Devlin, Ger & Talbot, Bruce
- 1710-1716 Load shifting of nuclear power plants using cryogenic energy storage technology
by Li, Yongliang & Cao, Hui & Wang, Shuhao & Jin, Yi & Li, Dacheng & Wang, Xiang & Ding, Yulong
- 1717-1730 Thermophotovoltaic energy conversion: Analytical aspects, prototypes and experiences
by Ferrari, Claudio & Melino, Francesco & Pinelli, Michele & Spina, Pier Ruggero
- 1731-1736 Chemical-looping combustion of syngas with nano CuO–NiO on chabazite
by Chang, F.C. & Liao, P.H. & Tsai, C.K. & Hsiao, M.C. & Paul Wang, H.
- 1737-1745 Hydrogen and methane generation from large hydraulic plant: Thermo-economic multi-level time-dependent optimization
by Rivarolo, M. & Magistri, L. & Massardo, A.F.
- 1746-1751 Germany’s water footprint of transport fuels
by Ayres, Andrew
- 1752-1763 Sustainable energy systems for a remote island community
by Chua, K.J. & Yang, W.M. & Er, S.S. & Ho, C.A.
- 1764-1774 Design and analysis of power management strategy for range extended electric vehicle using dynamic programming
by Chen, Bo-Chiuan & Wu, Yuh-Yih & Tsai, Hsien-Chi
- 1775-1785 Energy monitoring and quality control of a single screw extruder
by Deng, Jing & Li, Kang & Harkin-Jones, Eileen & Price, Mark & Karnachi, Nayeem & Kelly, Adrian & Vera-Sorroche, Javier & Coates, Phil & Brown, Elaine & Fei, Minrui
- 1786-1794 Ultra-thin minichannel LCP for EV battery thermal management
by Jin, L.W. & Lee, P.S. & Kong, X.X. & Fan, Y. & Chou, S.K.
- 1795-1800 The role of natural gas in a low carbon Asia Pacific
by Aguilera, Roberto F.
- 1801-1809 Optimum selection of compact heat exchangers using non-structural fuzzy decision method
by Zhou, Guo-Yan & Wu, En & Tu, Shan-Tung
- 1810-1818 Sharing emission space at an equitable basis: Allocation scheme based on the equal cumulative emission per capita principle
by Pan, Xunzhang & Teng, Fei & Wang, Gehua
- 1819-1825 Co-production of biodiesel and hydrogen from rapeseed and Jatropha oils with sodium silicate and Ni catalysts
by Long, Yun-Duo & Fang, Zhen & Su, Tong-Chao & Yang, Qing
- 1830-1835 Operation of a 100kW chemical-looping combustor with Mexican petroleum coke and Cerrejón coal
by Markström, Pontus & Linderholm, Carl & Lyngfelt, Anders
- 1836-1845 Iron-based syngas chemical looping process and coal-direct chemical looping process development at Ohio State University
by Tong, Andrew & Bayham, Samuel & Kathe, Mandar V. & Zeng, Liang & Luo, Siwei & Fan, Liang-Shih
- 1846-1854 The use of ilmenite as oxygen carrier with kerosene in a 300W CLC laboratory reactor with continuous circulation
by Moldenhauer, Patrick & Rydén, Magnus & Mattisson, Tobias & Younes, Mourad & Lyngfelt, Anders
- 1855-1862 The fate of sulphur in the Cu-based Chemical Looping with Oxygen Uncoupling (CLOU) Process
by Adánez-Rubio, Iñaki & Abad, Alberto & Gayán, Pilar & García-Labiano, Francisco & de Diego, Luis F. & Adánez, Juan
- 1863-1868 Comparison of a new micaceous iron oxide and ilmenite as oxygen carrier for Chemical looping combustion with respect to syngas conversion
by Mayer, Florian & Bidwe, Ajay R. & Schopf, Alexander & Taheri, Kamran & Zieba, Mariusz & Scheffknecht, Günter
- 1869-1873 Chemical-looping combustion of solid fuels – Status of development
by Lyngfelt, Anders
- 1874-1882 Experiments of char particle segregation effect on the gas conversion behavior in the fuel reactor for chemical looping combustion
by Bao, Jinhua & Li, Zhenshan & Cai, Ningsheng
- 1883-1894 Investigation of different manganese ores as oxygen carriers in chemical-looping combustion (CLC) for solid fuels
by Arjmand, Mehdi & Leion, Henrik & Mattisson, Tobias & Lyngfelt, Anders
- 1895-1901 Mechanistic studies of chemical looping desulfurization of Mn-based oxides using in situ X-ray absorption spectroscopy
by König, C.F.J. & Nachtegaal, M. & Seemann, M. & Clemens, F. & van Garderen, N. & Biollaz, S.M.A. & Schildhauer, T.J.
- 1902-1908 Experimental comparison of two different ilmenites in fluidized bed and fixed bed chemical-looping combustion
by Schwebel, G.L. & Filippou, D. & Hudon, G. & Tworkowski, M. & Gipperich, A. & Krumm, W.
- 1909-1915 Methane combustion by moving bed fuel reactor with Fe2O3/Al2O3 oxygen carriers
by Ku, Young & Wu, Hsuan-Chih & Chiu, Ping-Chin & Tseng, Yao-Hsuan & Kuo, Yu-Lin
- 1916-1923 Chemical looping combustion of ultra low concentration of methane with Fe2O3/Al2O3 and CuO/SiO2
by Zhang, Yongxing & Doroodchi, Elham & Moghtaderi, Behdad
- 1924-1932 Combined oxides as oxygen-carrier material for chemical-looping with oxygen uncoupling
by Rydén, Magnus & Leion, Henrik & Mattisson, Tobias & Lyngfelt, Anders
- 1933-1944 Modeling of CH4 combustion with NiO/NiAl2O4 in a 10kWth CLC pilot plant
by Yazdanpanah, M.M. & Forret, A. & Gauthier, T. & Delebarre, A.
- 1945-1951 Modeling of Cu oxidation in an adiabatic fixed-bed reactor with N2 recycling
by Fernandez, Jose Ramon & Abanades, Juan Carlos & Murillo, Ramon
- 1952-1957 Rotating bed reactor for CLC: Bed characteristics dependencies on internal gas mixing
by Håkonsen, Silje Fosse & Grande, Carlos A. & Blom, Richard
- 1958-1964 Design and evaluation of an IGCC power plant using iron-based syngas chemical-looping (SCL) combustion
by Sorgenfrei, Max & Tsatsaronis, George
2013, Volume 112, Issue C
- 1-11 Buffering intermittent renewable power with hydroelectric generation: A case study in California
by Chang, Martin K. & Eichman, Joshua D. & Mueller, Fabian & Samuelsen, Scott
- 12-22 Stochastic optimization approach to water management in cooling-constrained power plants
by Salazar, Juan M. & Diwekar, Urmila & Constantinescu, Emil & Zavala, Victor M.
- 23-34 A comprehensive assessment of the life cycle energy demand of passive houses
by Stephan, André & Crawford, Robert H. & de Myttenaere, Kristel
- 35-51 Integrated analysis of high-penetration PV and PHEV with energy storage and demand response
by Zhao, Jiayun & Kucuksari, Sadik & Mazhari, Esfandyar & Son, Young-Jun
- 52-59 Hydrogen production and purification from the water–gas shift reaction on CuO/CeO2–TiO2 catalysts
by Maciel, Cristhiane Guimarães & Silva, Tatiana de Freitas & Assaf, Elisabete Moreira & Assaf, José Mansur
- 60-66 Role of toluene in hydrogen sulfide combustion under Claus condition
by Ibrahim, S. & Al Shoaibi, A. & Gupta, A.K.
- 67-74 Calcium-based sorbent doped with attapulgite for CO2 capture
by Chen, Huichao & Zhao, Changsui & Yu, Weiwei
- 75-82 Longitudinal fluid flow and heat transfer between an elliptical hollow fiber membrane tube bank used for air humidification
by Huang, Si-Min & Yang, Minlin
- 83-92 A three-dimensional study on methane hydrate decomposition with different methods using five-spot well
by Wang, Yi & Li, Xiao-Sen & Li, Gang & Zhang, Yu & Li, Bo & Feng, Jing-Chun
- 93-101 Investigation on wetted area and film thickness for falling film liquid desiccant regeneration system
by Qi, Ronghui & Lu, Lin & Yang, Hongxing & Qin, Fei
- 102-119 Potential of the Miller cycle on a HSDI diesel automotive engine
by Rinaldini, Carlo Alberto & Mattarelli, Enrico & Golovitchev, Valeri I.
- 120-129 Quantifying uncertainties of neural network-based electricity price forecasts
by Khosravi, Abbas & Nahavandi, Saeid & Creighton, Doug
- 130-141 Dynamic behavior of Rankine cycle system for waste heat recovery of heavy duty diesel engines under driving cycle
by Xie, Hui & Yang, Can
- 142-151 Simulating home cooling load reductions for a novel opaque roof solar chimney configuration
by DeBlois, Justin & Bilec, Melissa & Schaefer, Laura
- 152-159 Generation of a typical meteorological year for north–east, Nigeria
by Ohunakin, Olayinka S. & Adaramola, Muyiwa S. & Oyewola, Olanrewaju M. & Fagbenle, Richard O.
- 160-169 Thermodynamic model of a thermal storage air conditioning system with dynamic behavior
by Fleming, Evan & Wen, Shaoyi & Shi, Li & da Silva, Alexandre K.
- 170-174 NOx and N2O precursors (NH3 and HCN) from biomass pyrolysis: interaction between amino acid and mineral matter
by Ren, Qiangqiang & Zhao, Changsui
- 175-184 Experimental and numerical study of annular PCM storage in the presence of natural convection
by Longeon, Martin & Soupart, Adèle & Fourmigué, Jean-François & Bruch, Arnaud & Marty, Philippe
- 185-193 Parameter estimation of solar cells and modules using an improved adaptive differential evolution algorithm
by Jiang, Lian Lian & Maskell, Douglas L. & Patra, Jagdish C.
- 194-204 Re-envisioning the renewable fuel standard to minimize unintended consequences: A comparison of microalgal diesel with other biodiesels
by Soratana, Kullapa & Khanna, Vikas & Landis, Amy E.
- 205-214 Optimal allocation of thermal, electric and cooling loads among generation technologies in household applications
by Morini, Mirko & Pinelli, Michele & Spina, Pier Ruggero & Venturini, Mauro
- 215-223 High-resolution modeling framework for planning electricity systems with high penetration of renewables
by Pina, André & Silva, Carlos A. & Ferrão, Paulo
- 224-234 Parametric behavior of a CO2 capture process: CFD simulation of solid-sorbent CO2 absorption in a riser reactor
by Breault, Ronald W. & Huckaby, E. David
- 235-245 Configuring wall layers for improved insulation performance
by Bond, Danielle E.M. & Clark, William W. & Kimber, Mark
- 246-256 Effects of n-butanol, 2-butanol, and methyl octynoate addition to diesel fuel on combustion and emissions over a wide range of exhaust gas recirculation (EGR) rates
by Liu, Haifeng & Li, Shanju & Zheng, Zunqing & Xu, Jia & Yao, Mingfa
- 257-273 A systematic review of bioenergy life cycle assessments
by Muench, Stefan & Guenther, Edeltraud
- 274-288 Evaluation of the potential of central receiver solar power plants: Configuration, optimization and trends
by Avila-Marin, Antonio L. & Fernandez-Reche, Jesus & Tellez, Felix M.
- 289-299 Carbon dioxide conversion to fuels and chemicals using a hybrid green process
by Ramachandriya, Karthikeyan D. & Kundiyana, Dimple K. & Wilkins, Mark R. & Terrill, Jennine B. & Atiyeh, Hasan K. & Huhnke, Raymond L.
- 300-312 Electrical, thermal and structural performance of a cooled PV module: Transient analysis using a multiphysics model
by Siddiqui, M.U. & Arif, A.F.M.
- 313-324 Investigation of noise radiation from a swirl stabilized diffusion flame with an array of microphones
by Singh, A.V. & Yu, M. & Gupta, A.K. & Bryden, K.M.
- 325-337 The influence of concrete density and conductivity on walls’ thermal inertia parameters under a variety of masonry and insulation placements
by Kontoleon, K.J. & Theodosiou, Th.G. & Tsikaloudaki, K.G.
- 338-349 Summer comfort in a low-inertia building with a new free-cooling system
by Brun, A. & Wurtz, E. & Hollmuller, P. & Quenard, D.
- 350-357 The effect of CO addition on the flame behavior of a non-premixed oxy-methane jet in a lab-scale furnace
by Oh, Jeongseog & Noh, Dongsoon & Lee, Eungyeong
- 358-370 Analysis of short helical and double U-tube borehole heat exchangers: A simulation-based comparison
by Zarrella, Angelo & Capozza, Antonio & De Carli, Michele
- 371-380 Quantifying the domestic electricity consumption for air-conditioning due to urban heat islands in hot arid regions
by Radhi, Hassan & Sharples, Stephen
- 381-387 Effect of K2CO3·1.5H2O on the regeneration energy consumption of potassium-based sorbents for CO2 capture
by Zhao, Wenying & Sprachmann, Gerald & Li, Zhenshan & Cai, Ningsheng & Zhang, Xiaohui
- 388-392 Mechanistic investigation into water tolerance of non-catalytic biodiesel conversion
by Kwon, Eilhann E. & Yi, Haakrho & Jeon, Young Jae
- 396-404 A technical and economic analysis of three large scale biomass combustion plants in the UK
by McIlveen-Wright, David R. & Huang, Ye & Rezvani, Sina & Redpath, David & Anderson, Mark & Dave, Ashok & Hewitt, Neil J.
- 405-413 A thermodynamic analysis of solid waste gasification in the Plasma Gasification Melting process
by Zhang, Qinglin & Wu, Yueshi & Dor, Liran & Yang, Weihong & Blasiak, Wlodzimierz
- 414-420 Air-blown gasification of woody biomass in a bubbling fluidized bed gasifier
by Kim, Young Doo & Yang, Chang Won & Kim, Beom Jong & Kim, Kwang Su & Lee, Jeung Woo & Moon, Ji Hong & Yang, Won & Yu, Tae U & Lee, Uen Do
- 421-430 A comparison of gasification phenomena among raw biomass, torrefied biomass and coal in an entrained-flow reactor
by Chen, Wei-Hsin & Chen, Chih-Jung & Hung, Chen-I & Shen, Cheng-Hsien & Hsu, Heng-Wen
- 431-439 Methanol production from steel-work off-gases and biomass based synthesis gas
by Lundgren, J. & Ekbom, T. & Hulteberg, C. & Larsson, M. & Grip, C.-E. & Nilsson, L. & Tunå, P.
- 440-447 Bio-methane via fast pyrolysis of biomass
by Görling, Martin & Larsson, Mårten & Alvfors, Per
- 448-453 Auto-thermal reforming of biomass raw fuel gas to syngas in a novel reformer: Promotion of hot-electron
by Wang, Tiejun & Yang, Yong & Ding, Mingyue & Liu, Qiying & Ma, Longlong
- 454-464 Pulverised wood combustion in a vertical furnace: Experimental and computational analyses
by Elfasakhany, A. & Tao, L. & Espenas, B. & Larfeldt, J. & Bai, X.S.
- 465-472 Different mixing modes for biogas plants using energy crops
by Kowalczyk, Alexandra & Harnisch, Eva & Schwede, Sebastian & Gerber, Mandy & Span, Roland
- 473-477 Bioavailability of cobalt and nickel during anaerobic digestion of sulfur-rich stillage for biogas formation
by Gustavsson, Jenny & Shakeri Yekta, Sepehr & Sundberg, Carina & Karlsson, Anna & Ejlertsson, Jörgen & Skyllberg, Ulf & Svensson, Bo H.
- 478-484 Microalgal biomethane production integrated with an existing biogas plant: A case study in Sweden
by Wang, Xiaoqiang & Nordlander, Eva & Thorin, Eva & Yan, Jinyue
- 485-492 Thermodynamic modeling of algal cell–solid substrate interactions
by Cui, Yan & Yuan, Wenqiao
- 493-499 Performance, combustion and emission characteristics of biodiesel derived from waste cooking oils
by An, H. & Yang, W.M. & Maghbouli, A. & Li, J. & Chou, S.K. & Chua, K.J.
- 500-506 Load characteristics of a spark-ignited ethanol engine with DME enrichment
by Liang, Chen & Ji, Changwei & Gao, Binbin
- 507-517 Methane potentials of the Swedish pulp and paper industry – A screening of wastewater effluents
by Ekstrand, Eva-Maria & Larsson, Madeleine & Truong, Xu-Bin & Cardell, Lina & Borgström, Ylva & Björn, Annika & Ejlertsson, Jörgen & Svensson, Bo H. & Nilsson, Fredrik & Karlsson, Anna
- 518-525 Comparative techno-economic analysis of biomass fuelled combined heat and power for commercial buildings
by Huang, Y. & McIlveen-Wright, D.R. & Rezvani, S. & Huang, M.J. & Wang, Y.D. & Roskilly, A.P. & Hewitt, N.J.
- 526-532 Activated carbons prepared from hydrothermally carbonized waste biomass used as adsorbents for CO2
by Hao, Wenming & Björkman, Eva & Lilliestråle, Malte & Hedin, Niklas
- 533-538 Production of cyclohexane from lignin degradation compounds over Ni/ZrO2–SiO2 catalysts
by Zhang, Xinghua & Wang, Tiejun & Ma, Longlong & Zhang, Qi & Huang, Xiaoming & Yu, Yuxiao
- 539-546 Stump torrefaction for bioenergy application
by Tran, Khanh-Quang & Luo, Xun & Seisenbaeva, Gulaim & Jirjis, Raida
- 547-559 Carbon and environmental footprinting of global biofuel production
by Hammond, Geoffrey P. & Seth, Shashank M.
- 560-567 Life cycle GHG analysis of rice straw bio-DME production and application in Thailand
by Silalertruksa, Thapat & Gheewala, Shabbir H. & Sagisaka, Masayuki & Yamaguchi, Katsunobu
- 568-575 Early development of an energy recovery wind turbine generator for exhaust air system
by Chong, W.T. & Poh, S.C. & Fazlizan, A. & Yip, S.Y. & Chang, C.K. & Hew, W.P.
- 576-591 CFD analysis of a heat transfer device integrated wind tower system for hot and dry climate
by Calautit, John Kaiser & Hughes, Ben Richard & Chaudhry, Hassam Nasarullah & Ghani, Saud Abdul
- 592-600 On the way to harness high-altitude wind power: Defining the operational asset for an airship wind generator
by Castellani, Francesco & Garinei, Alberto
- 601-609 The design, simulation and testing of an urban vertical axis wind turbine with the omni-direction-guide-vane
by Chong, W.T. & Fazlizan, A. & Poh, S.C. & Pan, K.C. & Hew, W.P. & Hsiao, F.B.
- 610-617 Multilayer perceptron applied to the estimation of the influence of the solar spectral distribution on thin-film photovoltaic modules
by Piliougine, Michel & Elizondo, David & Mora-López, Llanos & Sidrach-de-Cardona, Mariano
- 618-625 Outdoor performance of a low-concentrated photovoltaic–thermal hybrid system with crystalline silicon solar cells
by Kong, Chengdong & Xu, Zilin & Yao, Qiang
- 626-634 Comparative analysis of energy produced by photovoltaic modules with anti-soiling coated surface in arid climates
by Piliougine, M. & Cañete, C. & Moreno, R. & Carretero, J. & Hirose, J. & Ogawa, S. & Sidrach-de-Cardona, M.
- 635-645 Dynamic modelling of a PV pumping system with special consideration on water demand
by Campana, Pietro Elia & Li, Hailong & Yan, Jinyue
- 646-656 Investigation on the annual thermal performance of a photovoltaic wall mounted on a multi-layer façade
by Peng, Jinqing & Lu, Lin & Yang, Hongxing & Han, Jun
- 657-662 Preparation of lead-free nanoglass frit powder for crystalline silicon solar cells
by Che, Quande & Yang, Hongxing & Lu, Lin & Wang, Yuanhao
- 663-672 Performance evaluation of a stand-alone photovoltaic system on an isolated island in Hong Kong
by Ma, Tao & Yang, Hongxing & Lu, Lin
- 673-681 Full chain energy performance for a combined cooling, heating and power system running with methanol and solar energy
by Li, Sheng & Sui, Jun & Jin, Hongguang & Zheng, Jianjiao
- 682-689 Design of new molten salt thermal energy storage material for solar thermal power plant
by Peng, Qiang & Yang, Xiaoxi & Ding, Jing & Wei, Xiaolan & Yang, Jianping
- 690-696 Study on combined heat loss of a dish receiver with quartz glass cover
by Cui, Fuqing & He, Yaling & Cheng, Zedong & Li, Yinshi
- 697-702 Feasibility analysis of solar irrigation system for pastures conservation in a demonstration area in Inner Mongolia
by Xu, He & Liu, Jiahong & Qin, Dayong & Gao, Xuerui & Yan, Jinyue
- 703-709 Radiative heat transfer analysis in pure scattering layers to be used in vacuum insulation panels
by Jang, Choonghyo & Jung, Haeyong & Lee, Jaehyug & Song, Tae-Ho
- 710-718 Performance evaluation of solar aided feedwater heating of coal-fired power generation (SAFHCPG) system under different operating conditions
by Hong-juan, Hou & Zhen-yue, Yu & Yong-ping, Yang & Si, Chen & Na, Luo & Junjie, Wu
- 719-726 Experimental study of the performance for a novel kind of MHPA-FPC solar water heater
by Deng, Yuechao & Wang, Wei & Zhao, Yaohua & Yao, Liang & Wang, Xinyue
- 727-736 Performance analysis of a near zero CO2 emission solar hybrid power generation system
by Li, Yuanyuan & Zhang, Na & Cai, Ruixian & Yang, Yongping
- 737-746 Evaluation of geothermal energy in desalination by vacuum membrane distillation
by Sarbatly, Rosalam & Chiam, Chel-Ken
- 747-754 Peak and off-peak operations of the air separation unit in oxy-coal combustion power generation systems
by Hu, Yukun & Li, Xun & Li, Hailong & Yan, Jinyue
- 755-764 Effects of SO2 on CO2 capture using a hollow fiber membrane contactor
by Yang, Jie & Yu, Xinhai & Yan, Jinyue & Tu, Shan-Tung & Dahlquist, Erik
- 765-771 Production of precipitated calcium carbonate (PCC) from steelmaking slag for fixation of CO2
by Said, Arshe & Mattila, Hannu-Petteri & Järvinen, Mika & Zevenhoven, Ron
- 772-783 Using MCFC for high efficiency CO2 capture from natural gas combined cycles: Comparison of internal and external reforming
by Campanari, Stefano & Manzolini, Giampaolo & Chiesa, Paolo
- 784-792 Modelling and monitoring of geological carbon storage: A perspective on cross-validation
by Jiang, Xi & Akber Hassan, Wasim A. & Gluyas, Jon
- 793-799 The improved ChinaCCS decision support system: A case study for Beijing–Tianjin–Hebei Region of China
by Sun, Liang & Chen, Wenying
- 800-807 Thermodynamic analysis of chemical-looping hydrogen generation
by Zhang, Xiaosong & Jin, Hongguang
- 808-817 A computationally efficient particle submodel for CFD-simulations of fixed-bed conversion
by Ström, Henrik & Thunman, Henrik
- 818-833 Reducing the energy consumption and CO2 emissions of energy intensive industries through decision support systems – An example of application to the steel industry
by Porzio, Giacomo Filippo & Fornai, Barbara & Amato, Alessandro & Matarese, Nicola & Vannucci, Marco & Chiappelli, Lisa & Colla, Valentina
- 834-842 Life cycle primary energy use and carbon footprint of wood-frame conventional and passive houses with biomass-based energy supply
by Dodoo, Ambrose & Gustavsson, Leif
- 843-855 Carbon footprint of a reflective foil and comparison with other solutions for thermal insulation in building envelope
by Proietti, Stefania & Desideri, Umberto & Sdringola, Paolo & Zepparelli, Francesco
- 856-865 Midway toward the 2 degree target: Adequacy and fairness of the Cancún pledges
by Ha, Yuejiao & Teng, Fei
- 866-875 What’s the most cost-effective policy of CO2 targeted reduction: An application of aggregated economic technological model with CCS?
by Duan, Hong-Bo & Fan, Ying & Zhu, Lei
- 876-885 Hydraulic performance of a new district heating systems with distributed variable speed pumps
by Yan, Aibin & Zhao, Jun & An, Qingsong & Zhao, Yulong & Li, Hailong & Huang, Yrjö Jun
- 886-897 A power and cooling cogeneration system using mid/low-temperature heat source
by Sun, Liuli & Han, Wei & Jing, Xuye & Zheng, Danxing & Jin, Hongguang
- 898-906 Prediction and analysis of the seasonal performance of tri-generation and CO2 refrigeration systems in supermarkets
by Ge, Y.T. & Tassou, S.A. & Suamir, I.N.
- 907-917 Techno-economic analysis and optimization of the heat recovery of utility boiler flue gas
by Xu, Gang & Huang, Shengwei & Yang, Yongping & Wu, Ying & Zhang, Kai & Xu, Cheng
- 918-927 Optimisation of the energy efficiency of bread-baking ovens using a combined experimental and computational approach
by Khatir, Zinedine & Paton, Joe & Thompson, Harvey & Kapur, Nik & Toropov, Vassili
- 928-938 Performance analysis of an integrated CHP system with thermal and Electric Energy Storage for residential application
by Bianchi, M. & De Pascale, A. & Melino, F.
- 939-948 Modelling and control approaches for energy reduction in continuous frying systems
by Wu, H. & Tassou, S.A. & Karayiannis, T.G.
- 949-955 Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor–liquid separators and environmentally benign binary refrigerants
by Wang, Q. & Li, D.H. & Wang, J.P. & Sun, T.F. & Han, X.H. & Chen, G.M.
- 956-966 A review of waste heat recovery technologies towards molten slag in steel industry
by Zhang, Hui & Wang, Hong & Zhu, Xun & Qiu, Yong-Jun & Li, Kai & Chen, Rong & Liao, Qiang
- 967-974 Ideal thermal conductivity of a passive building wall: Determination method and understanding
by Zhang, Yu & Zhang, Yinping & Wang, Xin & Chen, Qun
- 975-980 Low-energy buildings and seasonal thermal energy storages from a behavioral economics perspective
by Persson, Johannes & Westermark, Mats
- 981-987 Measures for improving the adoption of higher efficiency appliances in Indonesian households: An analysis of lifetime use and decision-making in the purchase of electrical appliances
by Wijaya, Muhammad Ery & Tezuka, Tetsuo
- 988-998 A new method to determine thermophysical properties of PCM-concrete brick
by Cheng, Rui & Pomianowski, Michal & Wang, Xin & Heiselberg, Per & Zhang, Yinping
- 999-1005 Desiccant wheel thermal performance modeling for indoor humidity optimal control
by Wang, Nan & Zhang, Jiangfeng & Xia, Xiaohua
- 1006-1015 Optimal sampling plan for clean development mechanism energy efficiency lighting projects
by Ye, Xianming & Xia, Xiaohua & Zhang, Jiangfeng
- 1016-1024 Analysis and prediction of daylighting and energy performance in atrium spaces using daylight-linked lighting controls
by Chow, Stanley K.H. & Li, Danny H.W. & Lee, Eric W.M. & Lam, Joseph C.
- 1025-1031 Investigation of Ethanol/metal organic frameworks for low temperature adsorption cooling applications
by Rezk, Ahmed & AL-Dadah, Raya & Mahmoud, Saad & Elsayed, Ahmed
- 1032-1040 Wavelet study of dynamic variations in steel and ironmaking rest gases. Potential effect on external use
by Grip, Niklas & Grip, Carl-Erik & Nilsson, Leif
- 1041-1048 Pattern recognition-based chillers fault detection method using Support Vector Data Description (SVDD)
by Zhao, Yang & Wang, Shengwei & Xiao, Fu
- 1049-1055 Bootstrap-DEA analysis of BRICS’ energy efficiency based on small sample data
by Song, Ma-Lin & Zhang, Lin-Ling & Liu, Wei & Fisher, Ron
- 1056-1065 Including energy in supply chain planning at a pulp company
by Waldemarsson, Martin & Lidestam, Helene & Rudberg, Martin
- 1066-1077 A study of energy efficiency of transport sector in China from 2003 to 2009
by Chung, William & Zhou, Guanghui & Yeung, Iris M.H.
- 1078-1086 Measures to improve the performance of China’s thermal power industry in view of cost efficiency
by Wang, Yi-Shu & Xie, Bai-Chen & Shang, Li-Feng & Li, Wen-Hua
- 1087-1099 Comprehensive exergy-based evaluation and parametric study of a coal-fired ultra-supercritical power plant
by Yang, Yongping & Wang, Ligang & Dong, Changqing & Xu, Gang & Morosuk, Tatiana & Tsatsaronis, George
- 1100-1107 Geometric optimization of a 10-cell modular planar solid oxide fuel cell stack manifold
by Chen, Daifen & Zeng, Qice & Su, Shichuan & Bi, Wuxi & Ren, Zhiqiang
Printed from https://ideas.repec.org/s/eee/appene95.html
