Contact information of Elsevier
Corrections
All material on this site has been provided by the respective publishers and authors. You can help
correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene. See general information about how to correct material in RePEc.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .
Content
2013, Volume 109, Issue C
- 24-35 Environmental impact of decentralized power generation in Santa Clara City, Cuba: An integrated assessment based on technological and human health risk indicators
by Herrera, I. & De Ruyck, J. & Ocaña, V.S. & Rubio, M. & Martínez, R.M. & Núñez, V.
- 36-43 H2 rich gas production via pressurized fluidized bed gasification of sawdust with in situ CO2 capture
by Han, Long & Wang, Qinhui & Luo, Zhongyang & Rong, Nai & Deng, Guangyi
- 44-50 Performance of coal fly-ash based oxygen carrier for the chemical looping combustion of synthesis gas
by Aisyah, L. & Ashman, P.J. & Kwong, C.W.
- 51-59 Efficient, low-cost solar thermoelectric cogenerators comprising evacuated tubular solar collectors and thermoelectric modules
by Zhang, Ming & Miao, Lei & Kang, Yi Pu & Tanemura, Sakae & Fisher, Craig A.J. & Xu, Gang & Li, Chun Xin & Fan, Guang Zhu
- 60-66 A portable system powered with hydrogen and one single air-breathing PEM fuel cell
by Fernández-Moreno, J. & Guelbenzu, G. & Martín, A.J. & Folgado, M.A. & Ferreira-Aparicio, P. & Chaparro, A.M.
- 67-71 Agar chemical hydrogel electrode binder for fuel-electrolyte-fed fuel cells
by An, L. & Zhao, T.S. & Zeng, L.
- 72-78 Biorefineries for the production of first and second generation ethanol and electricity from sugarcane
by Dias, Marina O.S. & Junqueira, Tassia L. & Cavalett, Otávio & Pavanello, Lucas G. & Cunha, Marcelo P. & Jesus, Charles D.F. & Maciel Filho, Rubens & Bonomi, Antonio
- 79-93 Progress in catalytic naphtha reforming process: A review
by Rahimpour, Mohammad Reza & Jafari, Mitra & Iranshahi, Davood
- 94-103 Thermal modelling of large scale exploitation of ground source energy in urban aquifers as a resource management tool
by Herbert, Alan & Arthur, Simon & Chillingworth, Grace
- 104-111 Enhanced methane productivity from manure fibers by aqueous ammonia soaking pretreatment
by Jurado, Esperanza & Skiadas, Ioannis V. & Gavala, Hariklia N.
- 112-118 Development of amino acid and amino acid-complex based solid sorbents for CO2 capture
by Jiang, Bingbing & Wang, Xianfeng & Gray, McMahan L. & Duan, Yuhua & Luebke, David & Li, Bingyun
- 119-124 Effect of oxygen enrichment on acid gas combustion in hydrogen/air flames under claus conditions
by Selim, H. & Ibrahim, S. & Al Shoaibi, A. & Gupta, A.K.
- 125-134 Numerical prediction of CO2 capture process by a single droplet in alkaline spray
by Chen, Wei-Hsin & Tsai, Ming-Hang & Hung, Chen-I
- 135-144 Biodiesel from waste cooking oils via direct sonication
by Gude, Veera Gnaneswar & Grant, Georgene Elizabeth
- 145-153 A lead for transvaluation of global nuclear energy research and funded projects in Japan
by Kiriyama, Eriko & Kajikawa, Yuya & Fujita, Katsuhide & Iwata, Shuichi
- 154-162 Monitoring the performance of single and triple junction amorphous silicon modules in two building integrated photovoltaic (BIPV) installations
by Eke, Rustu & Senturk, Ali
- 163-170 Enhanced high energy efficient steam drying of algae
by Aziz, Muhammad & Oda, Takuya & Kashiwagi, Takao
- 171-181 Localization of multiple acoustic sources in a room environment
by Singh, A.V. & Yu, M. & Gupta, A.K. & Bryden, K.M.
- 182-191 Green energy: Water-containing acetone–butanol–ethanol diesel blends fueled in diesel engines
by Chang, Yu-Cheng & Lee, Wen-Jhy & Lin, Sheng-Lun & Wang, Lin-Chi
- 192-201 Comparison of high-temperature and low-temperature polymer electrolyte membrane fuel cell systems with glycerol reforming process for stationary applications
by Authayanun, Suthida & Mamlouk, Mohamed & Scott, Keith & Arpornwichanop, Amornchai
- 202-212 Experimental investigation of the effects of diesel injection strategy on gasoline/diesel dual-fuel combustion
by Ma, Shuaiying & Zheng, Zunqing & Liu, Haifeng & Zhang, Quanchang & Yao, Mingfa
- 213-219 Hydrogen supersaturation in extreme-thermophilic (70°C) mixed culture fermentation
by Zhang, Yan & Zhang, Fang & Chen, Man & Chu, Pei-Na & Ding, Jing & Zeng, Raymond J.
- 220-228 Investigation of the intrinsic CO2 gasification kinetics of biomass char at medium to high temperatures
by Lin, Leteng & Strand, Michael
- 229-238 The logistics of supplying single vs. multi-crop cellulosic feedstocks to a biorefinery in southeast North Dakota
by Maung, Thein A. & Gustafson, Cole R. & Saxowsky, David M. & Nowatzki, John & Miljkovic, Tatjana & Ripplinger, David
- 239-253 Intelligent optimized wind resource assessment and wind turbines selection in Huitengxile of Inner Mongolia, China
by Dong, Yao & Wang, Jianzhou & Jiang, He & Shi, Xiaomeng
- 254-266 Techno-economic assessment of biomass-to-ethanol by indirect fluidized bed gasification: Impact of reforming technologies and comparison with entrained flow gasification
by Reyes Valle, C. & Villanueva Perales, A.L. & Vidal-Barrero, F. & Gómez-Barea, A.
- 267-274 Fuel flexible distributed combustion for efficient and clean gas turbine engines
by Khalil, Ahmed E.E. & Gupta, Ashwani K.
- 275-282 Prediction of the theoretical capacity of non-aqueous lithium-air batteries
by Tan, Peng & Wei, Zhaohuan & Shyy, W. & Zhao, T.S.
- 283-290 From waste to energy: Microalgae production in wastewater and glycerol
by Cabanelas, Iago Teles Dominguez & Arbib, Zouhayr & Chinalia, Fábio A. & Souza, Carolina Oliveira & Perales, José A. & Almeida, Paulo Fernando & Druzian, Janice Izabel & Nascimento, Iracema Andrade
- 293-301 Simulation of thermal response tests in a layered subsurface
by Raymond, J. & Lamarche, L.
- 302-311 Error analysis of thermal response tests
by Witte, Henk J.L.
- 312-320 Distributed thermal response tests on pipe-in-pipe borehole heat exchangers
by Acuña, José & Palm, Björn
- 321-327 Efficient cooling energy supply with aquifer thermal energy storages
by Kranz, Stefan & Frick, Stephanie
- 328-336 Experimental and modeling analysis of a ground source heat pump system
by Montagud, Carla & Corberán, José Miguel & Ruiz-Calvo, Félix
- 337-343 Thermal energy storage strategies for effective closed greenhouse design
by Vadiee, Amir & Martin, Viktoria
- 344-351 Strategies for enhancing electrochemical activity of carbon-based electrodes for all-vanadium redox flow batteries
by Flox, Cristina & Skoumal, Marcel & Rubio-Garcia, Javier & Andreu, Teresa & Morante, Juan Ramón
- 352-359 New highly efficient regeneration process for thermochemical energy storage
by Mette, Barbara & Kerskes, Henner & Drück, Harald & Müller-Steinhagen, Hans
- 360-365 Prototype thermochemical heat storage with open reactor system
by Zondag, Herbert & Kikkert, Benjamin & Smeding, Simon & Boer, Robert de & Bakker, Marco
- 366-373 Charge and discharge strategies for a multi-tank thermal energy storage
by Dickinson, Ryan M. & Cruickshank, Cynthia A. & Harrison, Stephen J.
- 374-386 Impact of control schemes of a monovalent inverter-driven water-to-water heat pump with a desuperheater in continental and subtropical climates through simulation
by Blanco, David L. & Nagano, Katsunori & Morimoto, Masahiro
- 387-393 Compatibility of a post-industrial ceramic with nitrate molten salts for use as filler material in a thermocline storage system
by Calvet, Nicolas & Gomez, Judith C. & Faik, Abdessamad & Roddatis, Vladimir V. & Meffre, Antoine & Glatzmaier, Greg C. & Doppiu, Stefania & Py, Xavier
- 394-401 Pebble bed regenerator and storage system for high temperature use
by Daschner, Robert & Binder, Samir & Mocker, Mario
- 402-414 Modular object-oriented methodology for the resolution of molten salt storage tanks for CSP plants
by Rodríguez, I. & Pérez-Segarra, C.D. & Lehmkuhl, O. & Oliva, A.
- 415-420 Intercomparative tests on phase change materials characterisation with differential scanning calorimeter
by Lazaro, Ana & Peñalosa, Conchita & Solé, Aran & Diarce, Gonzalo & Haussmann, Thomas & Fois, Magali & Zalba, Belén & Gshwander, Stefan & Cabeza, Luisa F.
- 421-427 Comparison of three different devices available in Spain to test thermal properties of building materials including phase change materials
by Barreneche, Camila & de Gracia, Alvaro & Serrano, Susana & Elena Navarro, M. & Borreguero, Ana María & Inés Fernández, A. & Carmona, Manuel & Rodriguez, Juan Francisco & Cabeza, Luisa F.
- 428-432 Improvement of the thermal inertia of building materials incorporating PCM. Evaluation in the macroscale
by Barreneche, Camila & Navarro, M. Elena & Fernández, A. Inés & Cabeza, Luisa F.
- 433-440 Improved measurement technique for the characterization of organic and inorganic phase change materials using the T-history method
by Stanković, Stanislava B. & Kyriacou, Panayiotis A.
- 441-448 Physico-chemical and mechanical properties of microencapsulated phase change material
by Giro-Paloma, Jessica & Oncins, Gerard & Barreneche, Camila & Martínez, Mònica & Fernández, A. Inés & Cabeza, Luisa F.
- 449-453 Corrosion of metal and polymer containers for use in PCM cold storage
by Oró, Eduard & Miró, Laia & Barreneche, Camila & Martorell, Ingrid & Farid, Mohammed M. & Cabeza, Luisa F.
- 454-461 Melting with convection and radiation in a participating phase change material
by Miranda Fuentes, Johann & Johannes, Kévyn & Kuznik, Frédéric & Cosnier, Matthieu & Virgone, Joseph
- 462-469 High temperature latent heat storage with a screw heat exchanger: Design of prototype
by Zipf, Verena & Neuhäuser, Anton & Willert, Daniel & Nitz, Peter & Gschwander, Stefan & Platzer, Werner
- 470-475 Optimization of solar DHW system including PCM media
by Haillot, Didier & Franquet, Erwin & Gibout, Stéphane & Bédécarrats, Jean-Pierre
- 476-487 Stratification analysis in packed bed thermal energy storage systems
by Oró, Eduard & Castell, Albert & Chiu, Justin & Martin, Viktoria & Cabeza, Luisa F.
- 488-496 The use of phase change materials in fish farms: A general analysis
by Zsembinszki, Gabriel & Solé, Cristian & Castell, Albert & Pérez, Gabriel & Cabeza, Luisa F.
- 497-504 Development of high temperature phase-change-material storages
by Laing, Doerte & Bauer, Thomas & Breidenbach, Nils & Hachmann, Bernd & Johnson, Maike
- 505-513 Circulating fluidized bed heat recovery/storage and its potential to use coated phase-change-material (PCM) particles
by Pitié, F. & Zhao, C.Y. & Baeyens, J. & Degrève, J. & Zhang, H.L.
- 514-522 Building integration of PCM for natural cooling of buildings
by Álvarez, Servando & Cabeza, Luisa F. & Ruiz-Pardo, Alvaro & Castell, Albert & Tenorio, José Antonio
- 523-529 Active free cooling optimization with thermal energy storage in Stockholm
by Chiu, Justin N.W. & Gravoille, Pauline & Martin, Viktoria
- 530-537 Ventilated active façades with PCM
by Diarce, Gonzalo & Urresti, Aitor & García-Romero, Ana & Delgado, Alejandra & Erkoreka, Aitor & Escudero, Cesar & Campos-Celador, Álvaro
- 538-543 Pilot application of phase change slurry in a 5m3 storage
by Vorbeck, Laura & Gschwander, Stefan & Thiel, Peter & Lüdemann, Bruno & Schossig, Peter
- 544-552 Evaluation of the environmental impact of experimental buildings with different constructive systems using Material Flow Analysis and Life Cycle Assessment
by Rincón, Lídia & Castell, Albert & Pérez, Gabriel & Solé, Cristian & Boer, Dieter & Cabeza, Luisa F.
2013, Volume 108, Issue C
- 1-7 A novel thermochemical cycle for the dissociation of CO2 and H2O using sustainable energy sources
by Zhang, Yanwei & Zhu, Qiaoqiao & Lin, Xiangdong & Xu, Zemin & Liu, Jianbo & Wang, Zhihua & Zhou, Junhu & Cen, Kefa
- 8-23 Computer-aided conversion of an engine from diesel to methane
by Donateo, Teresa & Tornese, Federica & Laforgia, Domenico
- 24-33 Understanding and detecting misfire in an HCCI engine fuelled with ethanol
by Bahri, Bahram & Aziz, Azhar Abdul & Shahbakhti, Mahdi & Muhamad Said, Mohd Farid
- 34-44 Analysis of a novel gravity driven organic Rankine cycle for small-scale cogeneration applications
by Li, Jing & Pei, Gang & Li, Yunzhu & Ji, Jie
- 45-53 Harvesting of marine microalgae by electroflocculation: The energetics, plant design, and economics
by Lee, Andrew K. & Lewis, David M. & Ashman, Peter J.
- 54-65 Bio-syngas to gasoline and olefins via DME – A comprehensive techno-economic assessment
by Haro, Pedro & Trippe, Frederik & Stahl, Ralph & Henrich, Edmund
- 66-73 The complex future of CO2 capture and storage: Variable electricity generation and fossil fuel power
by Middleton, Richard S. & Eccles, Jordan K.
- 74-81 A study of nitrogen conversion and polycyclic aromatic hydrocarbon (PAH) emissions during hydrochar–lignite co-pyrolysis
by Liu, Zhengang & Quek, Augustine & Parshetti, Ganesh & Jain, Akshay & Srinivasan, M.P. & Hoekman, S. Kent & Balasubramanian, Rajasekhar
- 82-91 Analyzing microcogeneration systems based on LT-PEMFC and HT-PEMFC by energy balances
by Jannelli, Elio & Minutillo, Mariagiovanna & Perna, Alessandra
- 92-99 Control-oriented multi-phase combustion model for biodiesel fueled engines
by Zhao, Junfeng & Wang, Junmin
- 100-107 Screening microalgae strains for their productivity in methane following anaerobic digestion
by Frigon, Jean-Claude & Matteau-Lebrun, Frédérique & Hamani Abdou, Rekia & McGinn, Patrick J. & O’Leary, Stephen J.B. & Guiot, Serge R.
- 108-120 Constant rate thermal analysis for enhancing the long-term CO2 capture of CaO at Ca-looping conditions
by Valverde, Jose M. & Sanchez-Jimenez, Pedro E. & Perejon, Antonio & Perez-Maqueda, Luis A.
- 121-127 Investigation on water vapor effect on direct sulfation during wet-recycle oxy-coal combustion
by Duan, Lunbo & Jiang, Zhongxiao & Chen, Xiaoping & Zhao, Changsui
- 128-136 Assessment of GHG emissions of biomethane from energy cereal crops in Umbria, Italy
by Buratti, C. & Barbanera, M. & Fantozzi, F.
- 137-148 Development of an optimized artificial neural network model for combined heat and power micro gas turbines
by Nikpey, H. & Assadi, M. & Breuhaus, P.
- 149-157 An experimental study of the interaction between tar and SOFCs with Ni/GDC anodes
by Liu, Ming & van der Kleij, A. & Verkooijen, A.H.M. & Aravind, P.V.
- 158-167 What is the realistic potential for biomethane produced through gasification of indigenous Willow or imported wood chip to meet renewable energy heat targets?
by Gallagher, Cathal & Murphy, Jerry D.
- 168-175 Biogas production from microalgae grown in wastewater: Effect of microwave pretreatment
by Passos, Fabiana & Solé, Maria & García, Joan & Ferrer, Ivet
- 176-183 Heat load patterns in district heating substations
by Gadd, Henrik & Werner, Sven
- 184-193 Thermal control and performance assessment of a proton exchanger membrane fuel cell generator
by Hwang, Jenn-Jiang
- 194-201 An evaluation of different bioreactor configurations for continuous bio-ethanol production
by Ntihuga, Jean Nepomuscene & Senn, Thomas & Gschwind, Peter & Kohlus, Reinhard
- 202-217 Small-scale reforming of diesel and jet fuels to make hydrogen and syngas for fuel cells: A review
by Xu, Xinhai & Li, Peiwen & Shen, Yuesong
- 218-235 Monte Carlo analysis of Plug-in Hybrid Vehicles and Distributed Energy Resource growth with residential energy storage in Michigan
by Jung, Jaesung & Cho, Yongju & Cheng, Danling & Onen, Ahmet & Arghandeh, Reza & Dilek, Murat & Broadwater, Robert P.
- 236-247 Impact of vehicle propulsion electrification on Well-to-Wheel CO2 emissions of a medium duty truck
by Katrašnik, Tomaž
- 248-260 The challenges and strategies of butanol application in conventional engines: The sensitivity study of ignition and valve timing
by Deng, Banglin & Yang, Jing & Zhang, Daming & Feng, Renhua & Fu, Jianqin & Liu, Jingping & Li, Ke & Liu, Xiaoqiang
- 261-270 Mixed integer non-linear programming and Artificial Neural Network based approach to ancillary services dispatch in competitive electricity markets
by Canizes, Bruno & Soares, João & Faria, Pedro & Vale, Zita
- 271-280 Modeling of the energy demand of the residential sector in the United States using regression models and artificial neural networks
by Kialashaki, Arash & Reisel, John R.
- 281-287 High-density fed-batch culture of a thermotolerant microalga Chlorella sorokiniana for biofuel production
by Zheng, Yubin & Li, Tingting & Yu, Xiaochen & Bates, Philip D. & Dong, Tao & Chen, Shulin
- 288-297 Residential winter kWh responsiveness under optional time-varying pricing in British Columbia
by Woo, C.K. & Li, R. & Shiu, A. & Horowitz, I.
- 298-307 An experimental study of combustion and emissions of biomass pellets in a prototype pellet furnace
by Roy, Murari Mohon & Dutta, Animesh & Corscadden, Kenny
- 308-322 Threshold herd size for commercial viability of biomass waste to energy conversion systems on rural farms
by Namuli, R. & Pillay, P. & Jaumard, B. & Laflamme, C.B.
- 323-332 Economic and environmental impacts of a PV powered workplace parking garage charging station
by Tulpule, Pinak J. & Marano, Vincenzo & Yurkovich, Stephen & Rizzoni, Giorgio
- 333-339 Biodiesel production by transesterification catalyzed by an efficient choline ionic liquid catalyst
by Fan, Mingming & Huang, Jianglei & Yang, Jing & Zhang, Pingbo
- 340-348 Transient modeling and dynamic characteristics of thermoelectric cooler
by Meng, Jing-Hui & Wang, Xiao-Dong & Zhang, Xin-Xin
- 349-362 Automatic tuning of Kalman filters by maximum likelihood methods for wind energy forecasting
by Poncela, Marta & Poncela, Pilar & Perán, José Ramón
- 363-372 Determining appliance energy usage with a high-resolution metering system for residential natural gas meters
by Tewolde, M. & Longtin, J.P. & Das, S.R. & Sharma, S.
- 373-382 A comparative characterization study of Ca-looping natural sorbents
by Itskos, Grigorios & Grammelis, Panagiotis & Scala, Fabrizio & Pawlak-Kruczek, Halina & Coppola, Antonio & Salatino, Piero & Kakaras, Emmanuel
- 383-391 Designing learning curves for carbon capture based on chemical absorption according to the minimum work of separation
by Rochedo, Pedro R.R. & Szklo, Alexandre
- 392-401 A comparison between BNN and regression polynomial methods for the evaluation of the effect of soiling in large scale photovoltaic plants
by Massi Pavan, A. & Mellit, A. & De Pieri, D. & Kalogirou, S.A.
- 402-409 A comparative study of different carbon fuels in an electrolyte-supported hybrid direct carbon fuel cell
by Xu, Xiaoyong & Zhou, Wei & Liang, Fengli & Zhu, Zhonghua
- 410-428 Sparse online warped Gaussian process for wind power probabilistic forecasting
by Kou, Peng & Gao, Feng & Guan, Xiaohong
- 429-438 Dynamical optimal positioning of a photovoltaic panel in all weather conditions
by Gulin, Marko & Vašak, Mario & Perić, Nedjeljko
- 439-447 Multi-objective optimization of VOC recovery and reuse in crude oil loading
by Lee, Sangick & Choi, Inhwan & Chang, Daejun
- 448-458 Creating an in-home display: Experimental evidence and guidelines for design
by Krishnamurti, Tamar & Davis, Alexander L. & Wong-Parodi, Gabrielle & Wang, Jack & Canfield, Casey
- 459-465 Experimental and simulated thermal stratification evaluation of an oil storage tank subjected to heat losses during charging
by Mawire, Ashmore
- 466-476 Dynamic simulation of thermal-lag Stirling engines
by Cheng, Chin-Hsiang & Yang, Hang-Suin & Jhou, Bing-Yi & Chen, Yi-Cheng & Wang, Yu-Jen
- 477-485 Bubble dissolution in horizontal turbulent bubbly flow in domestic central heating system
by Ge, Y.T. & Fsadni, A.M. & Wang, H.S.
- 486-492 Cultivation of Nannochloropsis salina using anaerobic digestion effluent as a nutrient source for biofuel production
by Cai, Ting & Park, Stephen Y. & Racharaks, Ratanachat & Li, Yebo
- 493-504 Wind resource modelling in complex terrain using different mesoscale–microscale coupling techniques
by Carvalho, D. & Rocha, A. & Santos, C. Silva & Pereira, R.
- 505-514 Novel three-phase steam–air plasma torch for gasification of high-caloric waste
by Rutberg, Philip G. & Kuznetsov, Vadim A. & Serba, Evgeny O. & Popov, Sergey D. & Surov, Alexander V. & Nakonechny, Ghennady V. & Nikonov, Alexey V.
- 515-527 Optimizing the configuration of a façade module for office buildings by means of integrated thermal and lighting simulations in a total energy perspective
by Goia, Francesco & Haase, Matthias & Perino, Marco
2013, Volume 107, Issue C
- 1-9 An optimization model for natural gas supply portfolios of a power generation company
by Jirutitijaroen, Panida & Kim, Sujin & Kittithreerapronchai, Oran & Prina, José
- 10-24 Evaluation of Overall Thermal Transfer Value (OTTV) for commercial buildings constructed with green roof
by Chan, A.L.S. & Chow, T.T.
- 25-32 Configuration effects of natural gas fired multi-pair regenerative burners in a flameless oxidation furnace on efficiency and emissions
by Cho, E.-S. & Shin, D. & Lu, J. & de Jong, W. & Roekaerts, D.J.E.M.
- 33-51 Fulfilling the electricity demand of electric vehicles in the long term future: An evaluation of centralized and decentralized power supply systems
by Brouwer, Anne Sjoerd & Kuramochi, Takeshi & van den Broek, Machteld & Faaij, André
- 52-65 Soot temperature and KL factor for biodiesel and diesel spray combustion in a constant volume combustion chamber
by Zhang, Ji & Jing, Wei & Roberts, William L. & Fang, Tiegang
- 66-80 Technological drivers in data centers and telecom systems: Multiscale thermal, electrical, and energy management
by Garimella, Suresh V. & Persoons, Tim & Weibel, Justin & Yeh, Lian-Tuu
- 81-88 HC and CO emissions reduction by early injection strategy in a bioethanol blended diesel-fueled engine with a narrow angle injection system
by Park, Su Han & Yoon, Seung Hyun & Lee, Chang Sik
- 89-97 Theoretical and experimental investigation on a thermoelectric cooling and heating system driven by solar
by He, Wei & Zhou, Jinzhi & Hou, Jingxin & Chen, Chi & Ji, Jie
- 98-110 Optimization of process integration in a Kraft pulp and paper mill – Evaporation train and CHP system
by Mesfun, Sennai & Toffolo, Andrea
- 111-123 Interaction of iron–copper mixed metal oxide oxygen carriers with simulated synthesis gas derived from steam gasification of coal
by Siriwardane, Ranjani V. & Ksepko, Ewelina & Tian, Hanjing & Poston, James & Simonyi, Thomas & Sciazko, Marek
- 124-134 Energetic and environmental performance of three biomass upgrading processes integrated with a CHP plant
by Kohl, Thomas & Laukkanen, Timo & Järvinen, Mika & Fogelholm, Carl-Johan
- 135-148 The application of soft computing methods for MPPT of PV system: A technological and status review
by Salam, Zainal & Ahmed, Jubaer & Merugu, Benny S.
- 149-156 Towards biofuel combustion with an easily extruded clay as a natural catalyst
by Tian, Zhen-Yu & Chafik, Tarik & Assebban, Mhamed & Harti, Sanae & Bahlawane, Naoufal & Mountapmbeme Kouotou, Patrick & Kohse-Höinghaus, Katharina
- 157-172 Economic and environmental analysis of a trigeneration system for food-industry: A case study
by Freschi, F. & Giaccone, L. & Lazzeroni, P. & Repetto, M.
- 173-182 A study of the pyrolysis behaviors of pelletized recovered municipal solid waste fuels
by Zhou, Chunguang & Zhang, Qinglin & Arnold, Leonie & Yang, Weihong & Blasiak, Wlodzimierz
- 183-190 Impact of alternative fuels on performance and pollutant emissions of a light duty engine tested under the new European driving cycle
by Armas, Octavio & García-Contreras, Reyes & Ramos, Ángel
- 191-208 Forecasting models for wind speed using wavelet, wavelet packet, time series and Artificial Neural Networks
by Liu, Hui & Tian, Hong-qi & Pan, Di-fu & Li, Yan-fei
- 209-218 Prospects for arable farm uptake of Short Rotation Coppice willow and miscanthus in England
by Glithero, Neryssa J. & Wilson, Paul & Ramsden, Stephen J.
- 219-228 Numerical analysis of an organic Rankine cycle under steady and variable heat input
by Bamgbopa, Musbaudeen O. & Uzgoren, Eray
- 229-243 A building thermal bridges sensitivity analysis
by Capozzoli, Alfonso & Gorrino, Alice & Corrado, Vincenzo
- 244-254 Multiple process integrations for broad perspective analysis of fermentative H2 production from wastewater treatment: Technical and environmental considerations
by Mohanakrishna, G. & Mohan, S. Venkata
- 255-263 Development of an effective acidogenically digested swine manure-based algal system for improved wastewater treatment and biofuel and feed production
by Hu, Bing & Zhou, Wenguang & Min, Min & Du, Zhenyi & Chen, Paul & Ma, Xiaochen & Liu, Yuhuan & Lei, Hanwu & Shi, Jian & Ruan, Roger
- 264-270 Vacuum-assisted drying of polymer electrolyte membrane fuel cell
by Tang, Hong-Yue & Santamaria, Anthony D. & Bachman, John & Park, Jae Wan
- 271-280 A comparison between the ECMWF and COSMO Ensemble Prediction Systems applied to short-term wind power forecasting on real data
by Alessandrini, S. & Sperati, S. & Pinson, P.
- 281-296 Practical process design for in situ gasification of bitumen
by Kapadia, Punitkumar R. & Wang, Jingyi (Jacky) & Kallos, Michael S. & Gates, Ian D.
- 297-303 SiC foam monolith catalyst for pressurized adiabatic methane reforming
by Li, Chunlin & Xu, Hengyong & Hou, Shoufu & Sun, Jian & Meng, Fanqiong & Ma, Junguo & Tsubaki, Noritatsu
- 304-314 Influence of EGR and oxygen-enriched air on diesel engine NO–Smoke emission and combustion characteristic
by Zhang, Wei & Chen, Zhaohui & Li, Weidong & Shu, Gequn & Xu, Biao & Shen, Yinggang
- 315-328 Exergy and economic analyses of advanced IGCC–CCS and IGFC–CCS power plants
by Siefert, Nicholas S. & Litster, Shawn
- 329-337 Life cycle modeling of energy matrix scenarios, Belgian power and partial heat mixes as case study
by Rubio Rodríguez, M.A. & Feitó Cespón, M. & De Ruyck, J. & Ocaña Guevara, V.S. & Verma, V.K.
- 338-349 Considering start-ups and shutdowns using an optimisation tool – Including a dairy production planning case study
by Karlsson, Magnus & Mardan, Nawzad
- 350-363 Investigations on the influence of aquifers on the ground temperature in ground-source heat pump operation
by Capozza, Antonio & De Carli, Michele & Zarrella, Angelo
- 364-376 The effect of diurnal profile and seasonal wind regime on sizing grid-connected and off-grid wind power plants
by Carapellucci, Roberto & Giordano, Lorena
- 377-383 Low CO2 selective iron based Fischer–Tropsch catalysts for coal based polygeneration
by James, Olusola O. & Chowdhury, Biswajit & Auroux, Aline & Maity, Sudip
- 384-393 Estimating the daily global solar radiation spatial distribution from diurnal temperature ranges over the Tibetan Plateau in China
by Pan, Tao & Wu, Shaohong & Dai, Erfu & Liu, Yujie
- 394-402 Speculative trading and WTI crude oil futures price movement: An empirical analysis
by Zhang, Yue-Jun
- 403-411 An experimental investigation into the influence of unsteady wind on the performance of a vertical axis wind turbine
by Danao, Louis Angelo & Eboibi, Okeoghene & Howell, Robert
- 412-425 A hybrid tool to combine multi-objective optimization and multi-criterion decision making in designing standalone hybrid energy systems
by Perera, A.T.D. & Attalage, R.A. & Perera, K.K.C.K. & Dassanayake, V.P.C.
- 426-437 Numerical simulation of wind flow around a parabolic trough solar collector
by Hachicha, A.A. & Rodríguez, I. & Castro, J. & Oliva, A.
- 438-445 Co-digestion of used oils and urban landfill leachates with sewage sludge and the effect on the biogas production
by Pastor, L. & Ruiz, L. & Pascual, A. & Ruiz, B.
- 446-455 Simulation on the effect of the combustion parameters on the piston dynamics and engine performance using the Wiebe function in a free piston engine
by Kim, Jaeheun & Bae, Choongsik & Kim, Gangchul
- 456-464 Geodemographic analysis and estimation of early plug-in hybrid electric vehicle adoption
by Saarenpää, Jukka & Kolehmainen, Mikko & Niska, Harri
- 465-473 A highly resolved modeling technique to simulate residential power demand
by Muratori, Matteo & Roberts, Matthew C. & Sioshansi, Ramteen & Marano, Vincenzo & Rizzoni, Giorgio
2013, Volume 106, Issue C
- 1-16 Thermo-acoustic behavior of a swirl stabilized diffusion flame with heterogeneous sensors
by Singh, A.V. & Yu, M. & Gupta, A.K. & Bryden, K.M.
- 17-24 Temporal and spatial trends of residential energy consumption and air pollutant emissions in China
by Zhu, Dan & Tao, Shu & Wang, Rong & Shen, Huizhong & Huang, Ye & Shen, Guofeng & Wang, Bin & Li, Wei & Zhang, Yanyan & Chen, Han & Chen, Yuanchen & Liu, Junfeng & Li, Bengang & Wang, Xilong & Liu, Wenxin
- 25-30 A nano-graphite/paraffin phase change material with high thermal conductivity
by Li, Min
- 31-46 Wave power variability over the northwest European shelf seas
by Neill, Simon P. & Hashemi, M. Reza
- 47-55 Daily heat load variations in Swedish district heating systems
by Gadd, Henrik & Werner, Sven
- 56-64 A resorption cycle for the cogeneration of electricity and refrigeration
by Wang, Liwei & Ziegler, Felix & Roskilly, Anthony Paul & Wang, Ruzhu & Wang, Yaodong
- 65-71 Examining the impact factors of energy-related CO2 emissions using the STIRPAT model in Guangdong Province, China
by Wang, Ping & Wu, Wanshui & Zhu, Bangzhu & Wei, Yiming
- 72-78 On the importance of the location of PCMs in building walls for enhanced thermal performance
by Jin, Xing & Medina, Mario A. & Zhang, Xiaosong
- 79-88 Optimal design of thermoelectric devices with dimensional analysis
by Lee, HoSung
- 89-99 Multi-step-ahead prediction of NOx emissions for a coal-based boiler
by Smrekar, J. & Potočnik, P. & Senegačnik, A.
- 100-115 Economic appraisal of shale gas plays in Continental Europe
by Weijermars, Ruud
- 116-126 Performance assessment of producing Mg(OH)2 for CO2 mineral sequestration
by Nduagu, Experience & Romão, Inês & Fagerlund, Johan & Zevenhoven, Ron
- 127-142 Analysis and sizing of thermal energy storage in combined heating, cooling and power plants for buildings
by Martínez-Lera, S. & Ballester, J. & Martínez-Lera, J.
- 143-151 A review on carbon dioxide capture and storage technology using coal fly ash
by Wee, Jung-Ho
- 152-162 Study liquid length penetration results obtained with a direct acting piezo electric injector
by Payri, Raul & Gimeno, Jaime & Bardi, Michele & Plazas, Alejandro H.
- 163-175 Breakthrough fuel cell technology using ceria-based multi-functional nanocomposites
by Zhu, Bin & Fan, Liangdong & Lund, Peter
- 176-183 A One-compartment direct glucose alkaline fuel cell with methyl viologen as electron mediator
by Liu, Xianhua & Hao, Miaoqing & Feng, Mengnan & Zhang, Lin & Zhao, Yong & Du, Xiwen & Wang, Guangyi
- 184-197 Numerical study on the combustion and emission characteristics of a methanol/diesel reactivity controlled compression ignition (RCCI) engine
by Li, Yaopeng & Jia, Ming & Liu, Yaodong & Xie, Maozhao
- 198-208 Biodiesel production and comparison of emissions of a DI diesel engine fueled by biodiesel–diesel and canola oil–diesel blends at high idling operations
by Roy, Murari Mohon & Wang, Wilson & Bujold, Justin
- 209-221 Occupancy-based zone-climate control for energy-efficient buildings: Complexity vs. performance
by Goyal, Siddharth & Ingley, Herbert A. & Barooah, Prabir
- 222-231 An experimental study of a floating breakwater with asymmetric pneumatic chambers for wave energy extraction
by He, Fang & Huang, Zhenhua & Law, Adrian Wing-Keung
- 232-242 Mathematical modeling and experimental verification of an absorption chiller including three dimensional temperature and concentration distributions
by Jayasekara, Saliya & Halgamuge, Saman K.
- 243-253 Mixtures of SF6–CO2 as working fluids for geothermal power plants
by Yin, Hebi & Sabau, Adrian S. & Conklin, James C. & McFarlane, Joanna & Qualls, A. Lou
- 254-261 Experimental study on combustion and NOx emissions for a down-fired supercritical boiler with multiple-injection multiple-staging technology without overfire air
by Kuang, Min & Li, Zhengqi & Liu, Chunlong & Zhu, Qunyi
- 262-274 Techno-economic assessment of carbon-negative algal biodiesel for transport solutions
by Taylor, Benjamin & Xiao, Ning & Sikorski, Janusz & Yong, Minloon & Harris, Tom & Helme, Tim & Smallbone, Andrew & Bhave, Amit & Kraft, Markus
- 275-286 Frequency based approach for simulating pressure waves at the inlet of internal combustion engines using a parameterized model
by Mezher, Haitham & Chalet, David & Migaud, Jérôme & Chesse, Pascal
- 287-300 Modeling and co-simulation of a parabolic trough solar plant for industrial process heat
by Silva, R. & Pérez, M. & Fernández-Garcia, A.
- 301-306 A sandwich structured membrane for direct methanol fuel cells operating with neat methanol
by Wu, Q.X. & Zhao, T.S. & Chen, R. & An, L.
- 307-313 Energy efficiency and capacity retention of Ni–MH batteries for storage applications
by Zhu, Wenhua H. & Zhu, Ying & Davis, Zenda & Tatarchuk, Bruce J.
- 314-320 Energy consumption feedback devices’ impact evaluation on domestic energy use
by Vassileva, Iana & Dahlquist, Erik & Wallin, Fredrik & Campillo, Javier
- 321-327 Preparation of a novel PEG composite with halogen-free flame retardant supporting matrix for thermal energy storage application
by Qian, Yong & Wei, Ping & Jiang, Pingkai & Li, Zhi & Yan, Yonggang & Liu, Jiping
- 328-336 Investigation of selective catalytic reduction for control of nitrogen oxides in full-scale dairy energy production
by Camarillo, Mary Kay & Stringfellow, William T. & Hanlon, Jeremy S. & Watson, Kyle A.
- 337-354 Modelling of a two-phase thermofluidic oscillator for low-grade heat utilisation: Accounting for irreversible thermal losses
by Solanki, Roochi & Mathie, Richard & Galindo, Amparo & Markides, Christos N.
- 355-364 Bottoming organic Rankine cycle for a small scale gas turbine: A comparison of different solutions
by Clemente, Stefano & Micheli, Diego & Reini, Mauro & Taccani, Rodolfo
- 365-376 Experimental evaluation of a real time energy management system for stand-alone microgrids in day-ahead markets
by Marzband, Mousa & Sumper, Andreas & Ruiz-Álvarez, Albert & Domínguez-García, José Luis & Tomoiagă, Bogdan
- 377-382 A traveling-wave thermoacoustic electric generator with a variable electric R-C load
by Sun, D.M. & Wang, K. & Zhang, X.J. & Guo, Y.N. & Xu, Y. & Qiu, L.M.
- 383-390 New hybrid absorption–compression refrigeration system based on cascade use of mid-temperature waste heat
by Han, Wei & Sun, Liuli & Zheng, Danxing & Jin, Hongguang & Ma, Sijun & Jing, Xuye
- 391-406 Spatial planning framework for biomass resources for power production at regional level: A case study for Fujian Province, China
by Sun, Yanwei & Wang, Run & Liu, Jian & Xiao, Lishan & Lin, Yanjie & Kao, William
2013, Volume 105, Issue C
- 1-7 Dilute acid pretreatment and fermentation of sugar beet pulp to ethanol
by Zheng, Yi & Lee, Christopher & Yu, Chaowei & Cheng, Yu-Shen & Zhang, Ruihong & Jenkins, Bryan M. & VanderGheynst, Jean S.
- 8-16 Experimental and numerical investigation on the jet characteristics of spark ignition direct injection gaseous injector
by Chitsaz, Iman & Saidi, Mohammad Hassan & Mozafari, Ali Asghar & Hajialimohammadi, Alireza
- 17-29 Comparative evaluation of emission and fuel economy of an automotive spark ignition vehicle fuelled with methane enriched biogas and CNG using chassis dynamometer
by Subramanian, K.A. & Mathad, Vinaya C. & Vijay, V.K. & Subbarao, P.M.V.
- 30-46 Multi-decadal variability in a centennial reconstruction of daily wind
by Kirchner-Bossi, N. & Prieto, L. & García-Herrera, R. & Carro-Calvo, L. & Salcedo-Sanz, S.
- 47-56 Numerical investigations of flow field designs for vanadium redox flow batteries
by Xu, Q. & Zhao, T.S. & Leung, P.K.
- 57-65 Thermogravimetric analysis and kinetics of co-pyrolysis of raw/torrefied wood and coal blends
by Lu, Ke-Miao & Lee, Wen-Jhy & Chen, Wei-Hsin & Lin, Ta-Chang
Printed from https://ideas.repec.org/s/eee/appene97.html
