IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v115y2014icp337-351.html
   My bibliography  Save this article

Effects of load-following operational methods on combined heat and power system efficiency

Author

Listed:
  • Smith, Amanda D.
  • Mago, Pedro J.

Abstract

Combined heat and power (CHP) systems can be operated in partial loading situations when the maximum electrical and thermal output of the prime mover is not constantly required by the facility. Two basic load-following methods following the thermal load (FTL) and following the electric load (FEL), are compared with a hybrid method which either follows the thermal or the electric demand in a given time period, within a specified operating range, in order to minimize the amount of excess electrical or thermal energy produced by the CHP system. These methods are implemented on an hour by hour basis for a large hotel benchmark building which is modeled in 16 cities located in different climate zones using EnergyPlus building simulation software. The hybrid method results in a higher total CHP system efficiency than either the FTL or FEL methods, with CHP system efficiency values from 71% to 87%. The power-to-heat ratio of the building (PHRb), which describes the relationship between electrical and thermal demand for the given facility, is found to predict the maximum possible CHP system efficiency using the hybrid method on an hourly basis. Buildings with lower PHRb values, corresponding to higher relative thermal demands, have the highest possible CHP system efficiency values. The hybrid operational method is also implemented on a monthly basis, where the building’s average monthly demands are used to set the operating condition of the prime mover for the entire month. The building is then simulated on an hour by hour basis to determine the system’s performance with only monthly changes in the loading conditions. This monthly method produces similar results to the hybrid method when it is implemented on an hourly basis, with CHP system efficiency values from 74% to 86%.

Suggested Citation

  • Smith, Amanda D. & Mago, Pedro J., 2014. "Effects of load-following operational methods on combined heat and power system efficiency," Applied Energy, Elsevier, vol. 115(C), pages 337-351.
    • Handle: RePEc:eee:appene:v:115:y:2014:i:c:p:337-351
    DOI: 10.1016/j.apenergy.2013.10.063
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261913008957
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2013.10.063?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kopanos, Georgios M. & Georgiadis, Michael C. & Pistikopoulos, Efstratios N., 2013. "Energy production planning of a network of micro combined heat and power generators," Applied Energy, Elsevier, vol. 102(C), pages 1522-1534.
    2. Wang, Jiangjiang & Zhai, Zhiqiang (John) & Jing, Youyin & Zhang, Chunfa, 2010. "Particle swarm optimization for redundant building cooling heating and power system," Applied Energy, Elsevier, vol. 87(12), pages 3668-3679, December.
    3. Smith, Amanda D. & Mago, Pedro J. & Fumo, Nelson, 2011. "Emissions spark spread and primary energy spark spread – Environmental and energy screening parameters for combined heating and power systems," Applied Energy, Elsevier, vol. 88(11), pages 3891-3897.
    4. TeymouriHamzehkolaei, Fatemeh & Sattari, Sourena, 2011. "Technical and economic feasibility study of using Micro CHP in the different climate zones of Iran," Energy, Elsevier, vol. 36(8), pages 4790-4798.
    5. Verda, Vittorio & Baccino, Giorgia, 2012. "Thermoeconomic approach for the analysis of control system of energy plants," Energy, Elsevier, vol. 41(1), pages 38-47.
    6. Smith, Amanda D. & Fumo, Nelson & Mago, Pedro J., 2011. "Spark spread - A screening parameter for combined heating and power systems," Applied Energy, Elsevier, vol. 88(5), pages 1494-1499, May.
    7. Wang, Jiangjiang & Zhai, Zhiqiang (John) & Jing, Youyin & Zhang, Chunfa, 2011. "Influence analysis of building types and climate zones on energetic, economic and environmental performances of BCHP systems," Applied Energy, Elsevier, vol. 88(9), pages 3097-3112.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Piacentino, Antonio & Barbaro, Chiara, 2013. "A comprehensive tool for efficient design and operation of polygeneration-based energy μgrids serving a cluster of buildings. Part II: Analysis of the applicative potential," Applied Energy, Elsevier, vol. 111(C), pages 1222-1238.
    2. Ren, Fukang & Wei, Ziqing & Zhai, Xiaoqiang, 2021. "Multi-objective optimization and evaluation of hybrid CCHP systems for different building types," Energy, Elsevier, vol. 215(PA).
    3. Wang, Jiangjiang & Sui, Jun & Jin, Hongguang, 2015. "An improved operation strategy of combined cooling heating and power system following electrical load," Energy, Elsevier, vol. 85(C), pages 654-666.
    4. Elias, R.S. & Wahab, M.I.M. & Fang, L., 2016. "The spark spread and clean spark spread option based valuation of a power plant with multiple turbines," Energy Economics, Elsevier, vol. 59(C), pages 314-327.
    5. Wang, Meng & Zheng, J.H. & Li, Zhigang & Wu, Q.H., 2022. "Multi-attribute decision analysis for optimal design of park-level integrated energy systems based on load characteristics," Energy, Elsevier, vol. 254(PA).
    6. Ren, Hongbo & Zhou, Weisheng & Gao, Weijun, 2012. "Optimal option of distributed energy systems for building complexes in different climate zones in China," Applied Energy, Elsevier, vol. 91(1), pages 156-165.
    7. Ruan, Yingjun & Liu, Qingrong & Li, Zhengwei & Wu, Jiazheng, 2016. "Optimization and analysis of Building Combined Cooling, Heating and Power (BCHP) plants with chilled ice thermal storage system," Applied Energy, Elsevier, vol. 179(C), pages 738-754.
    8. Han, Jie & Ouyang, Leixin & Xu, Yuzhen & Zeng, Rong & Kang, Shushuo & Zhang, Guoqiang, 2016. "Current status of distributed energy system in China," Renewable and Sustainable Energy Reviews, Elsevier, vol. 55(C), pages 288-297.
    9. Meybodi, Mehdi Aghaei & Behnia, Masud, 2011. "Impact of carbon tax on internal combustion engine size selection in a medium scale CHP system," Applied Energy, Elsevier, vol. 88(12), pages 5153-5163.
    10. Wang, Jiang-Jiang & Xu, Zi-Long & Jin, Hong-Guang & Shi, Guo-hua & Fu, Chao & Yang, Kun, 2014. "Design optimization and analysis of a biomass gasification based BCHP system: A case study in Harbin, China," Renewable Energy, Elsevier, vol. 71(C), pages 572-583.
    11. Kavvadias, K.C., 2016. "Energy price spread as a driving force for combined generation investments: A view on Europe," Energy, Elsevier, vol. 115(P3), pages 1632-1639.
    12. Knizley, Alta A. & Mago, Pedro J. & Smith, Amanda D., 2014. "Evaluation of the performance of combined cooling, heating, and power systems with dual power generation units," Energy Policy, Elsevier, vol. 66(C), pages 654-665.
    13. Onishi, Viviani C. & Antunes, Carlos H. & Fraga, Eric S. & Cabezas, Heriberto, 2019. "Stochastic optimization of trigeneration systems for decision-making under long-term uncertainty in energy demands and prices," Energy, Elsevier, vol. 175(C), pages 781-797.
    14. Antonio Piacentino & Roberto Gallea & Pietro Catrini & Fabio Cardona & Domenico Panno, 2016. "On the Reliability of Optimization Results for Trigeneration Systems in Buildings, in the Presence of Price Uncertainties and Erroneous Load Estimation," Energies, MDPI, vol. 9(12), pages 1-31, December.
    15. Ebrahim Morady & Madjid Soltani & Farshad Moradi Kashkooli & Masoud Ziabasharhagh & Armughan Al-Haq & Jatin Nathwani, 2022. "Improving Energy Efficiency by Utilizing Wetted Cellulose Pads in Passive Cooling Systems," Energies, MDPI, vol. 15(1), pages 1-17, January.
    16. Ahmadi, Seyed Ehsan & Sadeghi, Delnia & Marzband, Mousa & Abusorrah, Abdullah & Sedraoui, Khaled, 2022. "Decentralized bi-level stochastic optimization approach for multi-agent multi-energy networked micro-grids with multi-energy storage technologies," Energy, Elsevier, vol. 245(C).
    17. Romero-Quete, David & Garcia, Javier Rosero, 2019. "An affine arithmetic-model predictive control approach for optimal economic dispatch of combined heat and power microgrids," Applied Energy, Elsevier, vol. 242(C), pages 1436-1447.
    18. Entchev, E. & Yang, L. & Ghorab, M. & Lee, E.J., 2013. "Simulation of hybrid renewable microgeneration systems in load sharing applications," Energy, Elsevier, vol. 50(C), pages 252-261.
    19. Picallo-Perez, Ana & Catrini, Pietro & Piacentino, Antonio & Sala, José-Mª, 2019. "A novel thermoeconomic analysis under dynamic operating conditions for space heating and cooling systems," Energy, Elsevier, vol. 180(C), pages 819-837.
    20. Yu Liu & Shan Gao & Xin Zhao & Chao Zhang & Ningyu Zhang, 2017. "Coordinated Operation and Control of Combined Electricity and Natural Gas Systems with Thermal Storage," Energies, MDPI, vol. 10(7), pages 1-25, July.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:115:y:2014:i:c:p:337-351. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.