Contact information of Elsevier
Serial Information
Download restrictions: Full text for ScienceDirect subscribers only
Series handle: RePEc:eee:energy
ISSN: 0360-5442
Citations RSS feed: at CitEc
Impact factors
Access and download statisticsTop item:
Corrections
All material on this site has been provided by the respective publishers and authors. You can help
correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy. See general information about how to correct material in RePEc.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .
Content
2016, Volume 106, Issue C
- 367-377 A stochastic optimization approach to reduce greenhouse gas emissions from buildings and transportation
by Karan, Ebrahim & Asadi, Somayeh & Ntaimo, Lewis
- 378-389 Multidisciplinary approaches to metallic bipolar plate design with bypass flow fields through deformable gas diffusion media of polymer electrolyte fuel cells
by Kim, Ah-Reum & Shin, Seungho & Um, Sukkee
- 390-399 Energetic and exergetic analyses of a new energy system for heating and power production purposes
by Bahlouli, Keyvan & Khoshbakhti Saray, Rahim
- 400-407 Two equations for estimating the exergy of woody biomass based on the exergy of ash
by Zhang, Yaning & Zhao, Wenke & Li, Bingxi & Zhang, Haochun & Jiang, Baocheng & Ke, Cunfeng
- 408-421 Modeling of waste heat powered energy system for container ships
by Cao, Tao & Lee, Hoseong & Hwang, Yunho & Radermacher, Reinhard & Chun, Ho-Hwan
- 422-430 Combustion of a single emulsion fuel droplet in a rapid compression machine
by Kim, Hyemin & Baek, Seung Wook
- 431-442 Comparative study on the effects of nitrogen and carbon dioxide on methane/air flames
by Zhang, Chi & Hu, Ge & Liao, Shiyong & Cheng, Qian & Xiang, Chenxuan & Yuan, Chun
- 443-452 Wind tunnel and numerical study of a straight-bladed vertical axis wind turbine in three-dimensional analysis (Part I: For predicting aerodynamic loads and performance)
by Li, Qing'an & Maeda, Takao & Kamada, Yasunari & Murata, Junsuke & Kawabata, Toshiaki & Shimizu, Kento & Ogasawara, Tatsuhiko & Nakai, Alisa & Kasuya, Takuji
- 453-463 Dispatching strategies for coordinating environmental awareness and risk perception in wind power integrated system
by Jin, Jingliang & Zhou, Dequn & Zhou, Peng & Qian, Shuqu & Zhang, Mingming
- 464-474 Capturing CO2 from cement plants: A priority for reducing CO2 emissions in China
by Zhou, Wenji & Jiang, Di & Chen, Dingjiang & Griffy-Brown, Charla & Jin, Yong & Zhu, Bing
- 475-481 Stainless steel micro fuel cells with enclosed channels by laser additive manufacturing
by Scotti, Gianmario & Kanninen, Petri & Matilainen, Ville-Pekka & Salminen, Antti & Kallio, Tanja
- 482-509 An interactive operation management of a micro-grid with multiple distributed generations using multi-objective uniform water cycle algorithm
by Deihimi, Ali & Keshavarz Zahed, Babak & Iravani, Reza
- 510-519 Variable speed wind turbines with maximum power extraction using singular perturbation theory
by Ganjefar, Soheil & Mohammadi, Ali
- 520-527 A new approach and results of wall and air temperature dynamic analysis in underground spaces
by Szabó, J. & Kajtár, L. & Nyers, J. & Bokor, B.
- 528-534 Exergy analysis of an adiabatic compressed air energy storage system using a cascade of phase change materials
by Tessier, Michael J. & Floros, Michael C. & Bouzidi, Laziz & Narine, Suresh S.
- 535-545 Investigations of a new free piston expander engine cycle
by Preetham, B.S. & Weiss, L.
- 546-553 Promotion of hydrate-based CO2 capture from flue gas by additive mixtures (THF (tetrahydrofuran) + TBAB (tetra-n-butyl ammonium bromide))
by Yang, Mingjun & Jing, Wen & Zhao, Jiafei & Ling, Zheng & Song, Yongchen
- 554-561 The effects of various LED (light emitting diode) lighting strategies on simultaneous biogas upgrading and biogas slurry nutrient reduction by using of microalgae Chlorella sp
by Yan, Cheng & Muñoz, Raúl & Zhu, Liandong & Wang, Yanxin
- 562-578 Energy efficiency optimisation for distillation column using artificial neural network models
by Osuolale, Funmilayo N. & Zhang, Jie
- 579-589 Evaluation of automotive waste heat recovery for various driving modes
by Kim, SeLin & Choi, KyungWook & Lee, Kihyung & Kim, Kibum
- 590-601 Optimization of cantilevered stators in an industrial multistage compressor to improve efficiency
by Lu, Hanan & Li, Qiushi & Pan, Tianyu
- 602-617 Advanced lithium ion battery modeling and nonlinear analysis based on robust method in frequency domain: Nonlinear characterization and non-parametric modeling
by Firouz, Y. & Relan, R. & Timmermans, J.M. & Omar, N. & Van den Bossche, P. & Van Mierlo, J.
- 618-630 Analysis of combustion phenomena and pollutant formation in a small compression ignition engine fuelled with blended and pure rapeseed methyl ester
by Magno, Agnese & Mancaruso, Ezio & Vaglieco, Bianca Maria
- 631-645 Numerical study of the effect of relative humidity and stoichiometric flow ratio on PEM (proton exchange membrane) fuel cell performance with various channel lengths: An anode partial flooding modelling
by Xing, Lei & Cai, Qiong & Xu, Chenxi & Liu, Chunbo & Scott, Keith & Yan, Yongsheng
- 646-661 Numerical analysis of a heat-generating, truncated conical porous bed in a fluid-filled enclosure
by Chakravarty, Aranyak & Datta, Priyankan & Ghosh, Koushik & Sen, Swarnendu & Mukhopadhyay, Achintya
- 662-672 Prediction of lithium-ion battery capacity with metabolic grey model
by Chen, Lin & Lin, Weilong & Li, Junzi & Tian, Binbin & Pan, Haihong
- 673-690 Assessing the stationary energy storage equivalency of vehicle-to-grid charging battery electric vehicles
by Tarroja, Brian & Zhang, Li & Wifvat, Van & Shaffer, Brendan & Samuelsen, Scott
- 691-700 Numerical simulations on the wake effect of H-type vertical axis wind turbines
by Zuo, Wei & Wang, Xiaodong & Kang, Shun
- 701-711 Sustainable integration of intermittent renewable energy and electrified light-duty transportation through repurposing batteries of plug-in electric vehicles
by Shokrzadeh, Shahab & Bibeau, Eric
- 712-727 A multi-objective optimization framework for risk-controlled integration of renewable generation into electric power systems
by Mena, Rodrigo & Hennebel, Martin & Li, Yan-Fu & Zio, Enrico
- 728-742 FPGA (Field Programmable Gate Array) controlled solar based zero voltage and zero current switching DC–DC converter for battery storage applications
by Prasad, J. Sivavara & Obulesh, Y.P. & Babu, Ch. Sai
- 743-756 Preparation, characterization and optimization for upgrading Leucaena leucocephala bark to biochar fuel with high energy yielding
by Anupam, Kumar & Sharma, Arvind Kumar & Lal, Priti Shivhare & Dutta, Suman & Maity, Sudip
- 757-764 Photovoltaic and disinfection performance study of a hybrid photovoltaic-solar water disinfection system
by Wang, Yiping & Jin, Yanchao & Huang, Qunwu & Zhu, Li & Vivar, Marta & Qin, Lianwei & Sun, Yong & Cui, Yong & Cui, Lingyun
- 765-773 G.POT: A quantitative method for the assessment and mapping of the shallow geothermal potential
by Casasso, Alessandro & Sethi, Rajandrea
- 774-789 Power management of a hybrid renewable system for artificial islands: A case study
by Cozzolino, R. & Tribioli, L. & Bella, G.
- 790-801 Investigating the impact of weather variables on the energy yield and cost of energy of grid-connected solar concentrator systems
by Fernández, Eduardo F. & Talavera, D.L. & Almonacid, Florencia M. & Smestad, Greg P.
- 802-814 An advanced modeling system for optimization of wind farm layout and wind turbine sizing using a multi-level extended pattern search algorithm
by DuPont, Bryony & Cagan, Jonathan & Moriarty, Patrick
2016, Volume 105, Issue C
- 2-15 The exploitation of the physical exergy of liquid natural gas by closed power thermodynamic cycles. An overview
by Invernizzi, Costante M. & Iora, Paolo
- 16-24 Combined cascaded Rankine and direct expander based power units using LNG (liquefied natural gas) cold as heat sink in LNG regasification
by García, Ramón Ferreiro & Carril, Jose Carbia & Gomez, Javier Romero & Gomez, Manuel Romero
- 25-31 Application of the Stirling engine driven with cryogenic exergy of LNG (liquefied natural gas) for the production of electricity
by Szczygieł, Ireneusz & Stanek, Wojciech & Szargut, Jan
- 32-44 Thermodynamic analysis of a novel power plant with LNG (liquefied natural gas) cold exergy exploitation and CO2 capture
by Romero Gómez, Manuel & Romero Gómez, Javier & López-González, Luis M. & López-Ochoa, Luis M.
- 45-56 Cold energy utilization of liquefied natural gas for capturing carbon dioxide in the flue gas from the magnesite processing industry
by Zhao, Liang & Dong, Hui & Tang, Jiajun & Cai, Jiuju
- 57-69 Application of metal foam heat exchangers for a high-performance liquefied natural gas regasification system
by Kim, Dae Yeon & Sung, Tae Hong & Kim, Kyung Chun
- 70-79 A pump-free boosting system and its application to liquefied natural gas supply for large ships
by Seo, Suwon & Han, Sangheon & Lee, Sangick & Chang, Daejun
- 80-88 Optimal LNG (liquefied natural gas) regasification scheduling for import terminals with storage
by Trotter, Ian M. & Gomes, Marília Fernandes Maciel & Braga, Marcelo José & Brochmann, Bjørn & Lie, Ole Nikolai
2016, Volume 104, Issue C
- 1-15 Aerodynamic performance of a circulating airfoil section for Magnus systems via numerical simulation and flow visualization
by Kazemi, Seyed Ali & Nili-Ahmadabadi, Mahdi & Sedaghat, Ahmad & Saghafian, Mohsen
- 16-23 Maximizing recovery of energy and nutrients from urban wastewaters
by Selvaratnam, T. & Henkanatte-Gedera, S.M. & Muppaneni, T. & Nirmalakhandan, N. & Deng, S. & Lammers, P.J.
- 24-32 Numerical simulation of six jet Pelton turbine model
by Gupta, Vishal & Prasad, Vishnu & Khare, Ruchi
- 33-41 Hot metal yield optimization of a blast furnace based on constructal theory
by Liu, Xiong & Feng, Huijun & Chen, Lingen & Qin, Xiaoyong & Sun, Fengrui
- 42-52 Municipal solid waste gasification in semi-industrial conditions using air-CO2 mixtures
by Couto, Nuno & Silva, Valter & Rouboa, Abel
- 53-63 Solar fuel production at high temperatures using ceria as a dense membrane
by Zhu, Liya & Lu, Youjun & Shen, Shaohua
- 64-75 Performance of double source boiler with coal-fired and solar power tower heat for supercritical power generating unit
by Zhang, Maolong & Du, Xiaoze & Pang, Liping & Xu, Chao & Yang, Lijun
- 76-84 Experimental study on hydrate-based CO2 removal from CH4/CO2 mixture
by Wang, Fei & Fu, Shanfei & Guo, Gang & Jia, Zhen-Zhen & Luo, Sheng-Jun & Guo, Rong-Bo
- 85-98 Investigation on the performance of a heat recovery ventilator in different climate regions in China
by Bao, Lingling & Wang, Jinggang & Yang, Hongxing
- 99-106 A newly composed paraffin encapsulated prototype roof structure for efficient thermal management in hot climate
by Akeiber, Hussein J. & Wahid, Mazlan A. & Hussen, Hasanen M. & Mohammad, Abdulrahman Th.
- 107-113 A thermally self-sustaining solid oxide fuel cell system at ultra-low operating temperature (319 °C)
by Chang, Ikwhang & Bae, Jiwoong & Park, Joonho & Lee, Sunho & Ban, Myeongseok & Park, Taehyun & Lee, Yoon Ho & Song, Han Ho & Kim, Young-Beom & Cha, Suk Won
- 114-131 Investment and risk appraisal in energy storage systems: A real options approach
by Locatelli, Giorgio & Invernizzi, Diletta Colette & Mancini, Mauro
- 132-148 Primary energy implications of different design strategies for an apartment building
by Tettey, Uniben Yao Ayikoe & Dodoo, Ambrose & Gustavsson, Leif
- 149-157 Do oil prices drive agricultural commodity prices? Evidence from South Africa
by Fowowe, Babajide
- 158-170 Synergistic dosing effect of TiC/FeCr nanocatalysts on the hydrogenation/dehydrogenation kinetics of nanocrystalline MgH2 powders
by El-Eskandarany, M. Sherif & Shaban, Ehab & Alsairafi, Ammar A.
- 171-183 Electrical circuit analogy for analysis and optimization of absorption energy storage systems
by Zhao, Tian & Min, Yong & Chen, Qun & Hao, Jun-Hong
- 184-198 Using the ensemble Kalman filter for electricity load forecasting and analysis
by Takeda, Hisashi & Tamura, Yoshiyasu & Sato, Seisho
- 199-212 Hydrogen enhancement potential of synthetic biofuels manufacture in the European context: A techno-economic assessment
by Hannula, Ilkka
- 213-228 Reliability constrained congestion management with uncertain negawatt demand response firms considering repairable advanced metering infrastructures
by Tabandeh, Abbas & Abdollahi, Amir & Rashidinejad, Masoud
- 229-236 Performance of ground-source heat exchangers using short residential foundation piles
by Tsubaki, Koutaro & Mitsutake, Yuichi
- 237-249 Projection of fossil fuels consumption in the Venezuelan electricity generation industry
by Vidoza, Jorge A. & Gallo, Waldyr L.R.
- 250-265 A single-reciprocating-piston two-phase thermofluidic prime-mover
by Taleb, Aly I. & Timmer, Michael A.G. & El-Shazly, Mohamed Y. & Samoilov, Aleksandr & Kirillov, Valeriy A. & Markides, Christos N.
- 266-283 Energy efficiency, carbon emissions, and measures towards their improvement in the food and beverage sector for six European countries
by Meyers, Steven & Schmitt, Bastian & Chester-Jones, Mae & Sturm, Barbara
- 284-294 Effect of hydrogen addition on overall pollutant emissions of inverse diffusion flame
by Miao, J. & Leung, C.W. & Cheung, C.S. & Huang, Z.H. & Zhen, H.S.
- 295-307 Wind tunnel and numerical study of a straight-bladed Vertical Axis Wind Turbine in three-dimensional analysis (Part II: For predicting flow field and performance)
by Li, Qing'an & Maeda, Takao & Kamada, Yasunari & Murata, Junsuke & Kawabata, Toshiaki & Shimizu, Kento & Ogasawara, Tatsuhiko & Nakai, Alisa & Kasuya, Takuji
- 308-319 Intra-day electro-thermal model predictive control for polygeneration systems in microgrids
by Menon, Ramanunni P. & Maréchal, François & Paolone, Mario
2016, Volume 103, Issue C
- 1-15 Time series analysis of Bahrain's first hybrid renewable energy system
by Bin Shams, Mohamed & Haji, Shaker & Salman, Ali & Abdali, Hussain & Alsaffar, Alaa
- 16-26 Experimental investigation of a MnCl2/CaCl2-NH3 two-stage solid sorption freezing system for a refrigerated truck
by Gao, P. & Wang, L.W. & Wang, R.Z. & Zhang, X.F. & Li, D.P. & Liang, Z.W. & Cai, A.F.
- 27-37 Drivers in CO2 emissions variation: A decomposition analysis for 33 world countries
by Andreoni, Valeria & Galmarini, Stefano
- 38-48 Numerical modeling of repowering of a thermal power plant boiler using plasma combustion systems
by Ibrahimoglu, Beycan & Yilmazoglu, M. Zeki & Cucen, Ahmet
- 49-60 The effects of household consumption pattern on regional development: A case study of Shanghai
by Tian, Xu & Geng, Yong & Dai, Hancheng & Fujita, Tsuyoshi & Wu, Rui & Liu, Zhe & Masui, Toshihiko & Yang, Xie
- 61-74 Optical non-intrusive measurements of internal recirculation zone of pulverized coal swirling flames with secondary swirl intensity
by Sung, Yonmo & Lee, Sangmin & Eom, Seongyong & Moon, Cheoreon & Ahn, Seongyool & Choi, Gyungmin & Kim, Duckjool
- 75-85 Heat transfer and fluid flow characteristics in air duct with various V-pattern rib roughness on the heated plate: A comparative study
by Kumar, Anil & Kim, Man-Hoe
- 86-99 Multi-objective optimal reconfiguration and DG (Distributed Generation) power allocation in distribution networks using Big Bang-Big Crunch algorithm considering load uncertainty
by Esmaeili, Mobin & Sedighizadeh, Mostafa & Esmaili, Masoud
- 100-106 Hollow carbon sphere/metal oxide nanocomposites anodes for lithium-ion batteries
by Wenelska, K. & Ottmann, A. & Schneider, P. & Thauer, E. & Klingeler, R. & Mijowska, E.
- 110-118 Integration and optimization of pressure retarded osmosis with reverse osmosis for power generation and high efficiency desalination
by Altaee, Ali & Millar, Graeme J. & Zaragoza, Guillermo
- 119-126 The effects of the engine design and running parameters on the performance of a Otto–Miller Cycle engine
by Dobrucali, Erinc
- 127-150 On the optimization of RO (Reverse Osmosis) system arrangements and their operating conditions
by Kotb, H. & Amer, E.H. & Ibrahim, K.A.
- 151-166 Life cycle energy and CO2 emission optimization for biofuel supply chain planning under uncertainties
by Ren, Jingzheng & An, Da & Liang, Hanwei & Dong, Liang & Gao, Zhiqiu & Geng, Yong & Zhu, Qinghua & Song, Shaoxian & Zhao, Wenhui
- 167-181 Geothermal potential assessment for a low carbon strategy: A new systematic approach applied in southern Italy
by Trumpy, E. & Botteghi, S. & Caiozzi, F. & Donato, A. & Gola, G. & Montanari, D. & Pluymaekers, M.P.D. & Santilano, A. & van Wees, J.D. & Manzella, A.
- 182-191 Experimental study of compressed air energy storage system with thermal energy storage
by Wang, Sixian & Zhang, Xuelin & Yang, Luwei & Zhou, Yuan & Wang, Junjie
- 192-204 A multi-agent based distributed energy management scheme for smart grid applications
by Radhakrishnan, Bharat Menon & Srinivasan, Dipti
- 205-214 Catalytic pyrolysis of Tetraselmis and Isochrysis microalgae by nickel ceria based catalysts for hydrocarbon production
by Aysu, Tevfik & Abd Rahman, Nur Adilah & Sanna, Aimaro
- 215-230 Inequality constrained nonlinear data reconciliation of a steam turbine power plant for enhanced parameter estimation
by Guo, Sisi & Liu, Pei & Li, Zheng
- 231-239 Optimal sizing and location of SPV (solar photovoltaic) based MLDG (multiple location distributed generator) in distribution system for loss reduction, voltage profile improvement with economical benefits
by Jamil, Majid & Anees, Ahmed Sharique
- 240-250 How do Spanish polluting sectors' stock market returns react to European Union allowances prices? A panel data approach
by Moreno, Blanca & Pereira da Silva, Patrícia
- 251-260 Usability of porous burner in kerosene pressure stove: An experimental investigation aided by energy and exergy analyses
by Sharma, Monikankana & Mahanta, P. & Mishra, Subhash C.
- 261-270 Energy performance of different silicon photovoltaic technologies under hot and harsh climate
by Tossa, Alain K. & Soro, Y.M. & Thiaw, L. & Azoumah, Y. & Sicot, Lionel & Yamegueu, D. & Lishou, Claude & Coulibaly, Y. & Razongles, Guillaume
- 271-289 Transient model to predict the performance of thermoelectric generators coupled with solar pond
by Ding, L.C. & Akbarzadeh, A. & Date, A.
- 290-304 Numerical simulation of electricity generation potential from fractured granite reservoir through vertical wells at Yangbajing geothermal field
by Zeng, Yu-chao & Zhan, Jie-min & Wu, Neng-you & Luo, Ying-ying & Cai, Wen-hao
- 305-312 A study on the effect of tar fouled on thermal efficiency of a wood pellet boiler: A performance analysis and simulation using Computation Fluid Dynamics
by Euh, Seung Hee & Kafle, Sagar & Choi, Yun Sung & Oh, Jae-Heun & Kim, Dae Hyun
- 313-321 An acoustically matched traveling-wave thermoacoustic generator achieving 750 W electric power
by Wang, Kai & Sun, Daming & Zhang, Jie & Xu, Ya & Luo, Kai & Zhang, Ning & Zou, Jiang & Qiu, Limin
- 322-339 Performance, aeroacoustics and feature extraction of an axial flow fan with abnormal blade angle
by Li, Chunxi & Lin, Qing & Ding, Xueliang & Ye, Xuemin
- 340-355 A study of regulated and green house gas emissions from a prototype heavy-duty compressed natural gas engine under transient and real life conditions
by Grigoratos, Theodoros & Fontaras, Georgios & Martini, Giorgio & Peletto, Cesare
- 356-368 Single phase fault location in electrical distribution feeder using hybrid method
by Daisy, Mohammad & Dashti, Rahman
- 369-384 Transient natural gas liquefaction and its application to CCC-ES (energy storage with cryogenic carbon capture™)
by Fazlollahi, Farhad & Bown, Alex & Ebrahimzadeh, Edris & Baxter, Larry L.
- 385-396 A waste cold recovery from the exhausted cryogenic nitrogen by using thermoelectric power generator
by Weng, Chien-Chou & Lin, Ming-Chyuan & Huang, Mei-Jiau
- 397-409 How to model the cycling ability of thermal units in power systems
by Babrowski, Sonja & Jochem, Patrick & Fichtner, Wolf
- 410-429 Shroud leakage flow models and a multi-dimensional coupling CFD (computational fluid dynamics) method for shrouded turbines
by Zou, Zhengping & Liu, Jingyuan & Zhang, Weihao & Wang, Peng
- 430-439 Efficiency of methane hydrate combustion for different types of oxidizer flow
by Misyura, S.Y.
- 440-446 An elevated-pressure cryogenic air separation unit based on self-heat recuperation technology for integrated gasification combined cycle systems
by Fu, Qian & Kansha, Yasuki & Song, Chunfeng & Liu, Yuping & Ishizuka, Masanori & Tsutsumi, Atsushi
- 447-455 Access to electricity and socio-economic characteristics: Panel data evidence at the country level
by Magnani, Natalia & Vaona, Andrea
- 456-468 Production of gasoline and diesel like fuels from waste tire oil by using catalytic pyrolysis
by Ayanoğlu, Abdulkadir & Yumrutaş, Recep
- 469-480 Environmental performance of wood pellets' production through life cycle analysis
by Laschi, Andrea & Marchi, Enrico & González-García, Sara
- 481-486 Ultra high supercapacitance of ultra small Co3O4 nanocubes
by Pal, Monalisa & Rakshit, Rupali & Singh, Ashutosh Kumar & Mandal, Kalyan
- 487-501 Household electricity demand profiles – A high-resolution load model to facilitate modelling of energy flexible buildings
by Marszal-Pomianowska, Anna & Heiselberg, Per & Kalyanova Larsen, Olena
- 502-512 Multi-criteria assessment of building combined heat and power systems located in different climate zones: Japan–China comparison
by Wu, Qiong & Ren, Hongbo & Gao, Weijun & Ren, Jianxing
- 513-521 Catalytic co-pyrolysis of paper biomass and plastic mixtures (HDPE (high density polyethylene), PP (polypropylene) and PET (polyethylene terephthalate)) and product analysis
by Chattopadhyay, Jayeeta & Pathak, T.S. & Srivastava, R. & Singh, A.C.
- 522-532 Transportation fuel production from gasified biomass integrated with a pulp and paper mill - Part B: Analysis of economic performance and greenhouse gas emissions
by Isaksson, Johan & Jansson, Mikael & Åsblad, Anders & Berntsson, Thore
- 533-542 Thermal behavior of waste tea pyrolysis by TG-FTIR analysis
by Tian, Linghui & Shen, Boxiong & Xu, Huan & Li, Fukuan & Wang, Yinyin & Singh, Surjit
- 543-556 Energy consumption across European Union farms: Efficiency in terms of farming output and utilized agricultural area
by Martinho, Vítor João Pereira Domingues
- 557-571 Transportation fuel production from gasified biomass integrated with a pulp and paper mill – Part A: Heat integration and system performance
by Isaksson, Johan & Jansson, Mikael & Åsblad, Anders & Berntsson, Thore
- 572-587 Flow phenomena leading to surge in a centrifugal compressor
by Semlitsch, Bernhard & Mihăescu, Mihai
- 588-597 Building energy efficiency for public hospitals and healthcare facilities in China: Barriers and drivers
by Wang, Tao & Li, Xiaodong & Liao, Pin-Chao & Fang, Dongping
- 598-604 Enhancement of microalgal biomass production and dissolved inorganic C fixation from actual coal flue gas by exogenous salicylic acid and 1-triacontanol growth promoters
by Ertit Taştan, Burcu & Duygu, Ergin & İlbaş, Mustafa & Dönmez, Gönül
- 605-617 A capacitive deionization system with high energy recovery and effective re-use
by Andres, Ginno L. & Yoshihara, Yoshinobu
- 618-629 Performance prediction of solid desiccant – Vapor compression hybrid air-conditioning system using artificial neural network
by Jani, D.B. & Mishra, Manish & Sahoo, P.K.
- 630-645 Energetic and exergetic efficiency modeling of a cargo aircraft by a topology improving neuro-evolution algorithm
by Baklacioglu, Tolga & Aydin, Hakan & Turan, Onder
- 646-659 Process integration of chemical looping combustion with oxygen uncoupling in a coal-fired power plant
by Spinelli, Maurizio & Peltola, Petteri & Bischi, Aldo & Ritvanen, Jouni & Hyppänen, Timo & Romano, Matteo C.
- 660-671 Experimental study of an ORC (Organic Rankine Cycle) and analysis of R1233zd-E as a drop-in replacement for R245fa for low temperature heat utilization
by Eyerer, Sebastian & Wieland, Christoph & Vandersickel, Annelies & Spliethoff, Hartmut
- 672-678 Applying optimization techniques to improve of energy efficiency and GHG (greenhouse gas) emissions of wheat production
by Nabavi-Pelesaraei, Ashkan & Hosseinzadeh-Bandbafha, Homa & Qasemi-Kordkheili, Peyman & Kouchaki-Penchah, Hamed & Riahi-Dorcheh, Farshid
- 679-687 Novel hybridized drying methods for processing of apple fruit: Energy conservation approach
by Hazervazifeh, Amin & Nikbakht, Ali M. & Moghaddam, Parviz A.
- 688-696 Contribution of emergency demand response programs in power system reliability
by Aghaei, Jamshid & Alizadeh, Mohammad-Iman & Siano, Pierluigi & Heidari, Alireza
- 697-708 High quality syngas production via steam-oxygen blown bubbling fluidised bed gasifier
by Stendardo, Stefano & Foscolo, Pier Ugo & Nobili, Mirko & Scaccia, Silvera
- 709-714 Energy penalty estimates for CO2 capture: Comparison between fuel types and capture-combustion modes
by Vasudevan, Suraj & Farooq, Shamsuzzaman & Karimi, Iftekhar A. & Saeys, Mark & Quah, Michael C.G. & Agrawal, Rakesh
- 715-724 Carbon exergy tax applied to biomass integrated gasification combined cycle in sugarcane industry
by Fonseca Filho, Valdi Freire da & Matelli, José Alexandre & Perrella Balestieri, José Antonio
- 725-734 Visible-light-induced photocatalytic oxidation of nitric oxide and sulfur dioxide: Discrete kinetics and mechanism
by Han, Yinghui & Zhang, Junjun & Zhao, Yi
- 735-745 Integration of renewable generation uncertainties into stochastic unit commitment considering reserve and risk: A comparative study
by Quan, Hao & Srinivasan, Dipti & Khosravi, Abbas
- 746-757 Accurate estimation model for small and micro hydropower plants costs in hybrid energy systems modelling
by Cavazzini, Giovanna & Santolin, Alberto & Pavesi, Giorgio & Ardizzon, Guido
- 758-771 Supercritical CO2 Brayton cycles for coal-fired power plants
by Mecheri, Mounir & Le Moullec, Yann
- 772-783 The effects of temperature on transport phenomena in phosphoric acid doped polybenzimidazole polymer electrolyte membrane fuel cell
by Elden, Gülşah & Çelik, Muhammet & Genç, Gamze & Yapıcı, Hüseyin
- 784-796 State of health estimation algorithm of LiFePO4 battery packs based on differential voltage curves for battery management system application
by Berecibar, Maitane & Garmendia, Maitane & Gandiaga, Iñigo & Crego, Jon & Villarreal, Igor
- 797-806 Banana peels as a biobase catalyst for fatty acid methyl esters production using Napoleon's plume (Bauhinia monandra) seed oil: A process parameters optimization study
by Betiku, Eriola & Akintunde, Aramide Mistura & Ojumu, Tunde Victor
- 807-823 A discrete and continuous mathematical model for the optimal synthesis and design of dual pressure heat recovery steam generators coupled to two steam turbines
by Manassaldi, Juan I. & Arias, Ana M. & Scenna, Nicolás J. & Mussati, Miguel C. & Mussati, Sergio F.
2016, Volume 102, Issue C
- 1-9 Kinetics of methane production and hydrolysis in anaerobic digestion of corn stover
by Li, Dong & Huang, Xianbo & Wang, Qingjing & Yuan, Yuexiang & Yan, Zhiying & Li, Zhidong & Huang, Yajun & Liu, Xiaofeng
- 10-23 A novel approach for optimal economic dispatch scheduling of integrated combined heat and power systems for maximum economic profit and minimum environmental emissions based on Benders decomposition
by Sadeghian, H.R. & Ardehali, M.M.
- 24-30 Interfuel substitution and biomass use in the U.S. industrial sector: A differential approach
by Suh, Dong Hee
- 31-43 Dynamic modelling of the expansion cylinder of an open Joule cycle Ericsson engine: A bond graph approach
by Creyx, M. & Delacourt, E. & Morin, C. & Desmet, B.
- 44-53 Scrutinizing the causality relationships between prices, production and consumption of fossil fuels: A panel data approach
by Biresselioglu, Mehmet Efe & Yelkenci, Tezer
- 54-64 Gas/particle two-phase flow characteristics of a down-fired 350 MWe supercritical utility boiler at different tertiary air ratios
by Liu, Chunlong & Li, Zhengqi & Zeng, Lingyan & Zhang, Qinghua & Hu, Richa & Zhang, Xusheng & Guo, Liang & Huang, Yong & Yang, Xianwei & Chen, Liheng
- 65-82 Grid-connected photovoltaic systems for Malaysian residential sector: Effects of component costs, feed-in tariffs, and carbon taxes
by Lau, K.Y. & Muhamad, N.A. & Arief, Y.Z. & Tan, C.W. & Yatim, A.H.M.
- 83-94 Modeling and parametric analysis of an adsorber unit for thermal energy storage
by Fernandes, M.S. & Brites, G.J.V.N. & Costa, J.J. & Gaspar, A.R. & Costa, V.A.F.
- 95-105 Preparation of refined bio-oil by catalytic transformation of vapors derived from vacuum pyrolysis of rape straw over modified HZSM-5
by Cai, Yixi & Fan, Yongsheng & Li, Xiaohua & Chen, Lei & Wang, Jiajun
- 106-117 Post-combustion CO2 capture with ammonia by vortex flow-based multistage spraying: Process intensification and performance characteristics
by Zhao, Bingtao & Su, Yaxin & Cui, Guomin
- 118-138 A study of a wind catcher assisted adsorption cooling channel for natural cooling of a 2-storey building
by Haghighi, A.P. & Pakdel, S.H. & Jafari, A.
- 139-147 Influence of thermal hydrolysis on composition characteristics of fatty acids in kitchen waste
by Li, Yangyang & Jin, Yiying & Li, Jinhui
- 148-160 Heat mining assessment for geothermal reservoirs in Mexico using supercritical CO2 injection
by Pan, Chunjian & Chávez, Oscar & Romero, Carlos E. & Levy, Edward K. & Aguilar Corona, Alicia & Rubio-Maya, Carlos
- 161-165 Investigation of water transport dynamics in polymer electrolyte membrane fuel cells based on high porous micro porous layers
by Alrwashdeh, Saad S. & Markötter, Henning & Haußmann, Jan & Arlt, Tobias & Klages, Merle & Scholta, Joachim & Banhart, John & Manke, Ingo
- 166-175 The influence of blade pitch angle on the performance of a model horizontal axis tidal stream turbine operating under wave–current interaction
by de Jesus Henriques, Tiago A. & Hedges, Terry S. & Owen, Ieuan & Poole, Robert J.
- 176-186 Energy and entropy analyses of hydrate dissociation in different scales of hydrate simulator
by Feng, Jing-Chun & Wang, Yi & Li, Xiao-Sen
- 187-198 Energy, exergy and techno-economic analyses of hydrothermal oxidation of food waste to produce hydro-char and bio-oil
by Mahmood, Russell & Parshetti, Ganesh K. & Balasubramanian, Rajasekhar
- 199-215 A multiyear DG-incorporated framework for expansion planning of distribution networks using binary chaotic shark smell optimization algorithm
by Ahmadigorji, Masoud & Amjady, Nima
- 216-230 GHGs (greenhouse gases) emission and economic analysis of a GCRES (grid-connected renewable energy system) in the arid region, Algeria
by saheb Koussa, Djohra & Koussa, Mustapha
- 231-243 Modeling the UK electricity price distributions using quantile regression
by Hagfors, Lars Ivar & Bunn, Derek & Kristoffersen, Eline & Staver, Tiril Toftdahl & Westgaard, Sjur
- 244-251 Influence of ammonium dihydrogen phosphate on potassium retention and ash melting characteristics during combustion of biomass
by Qi, Jianhui & Li, Hui & Han, Kuihua & Zuo, Qi & Gao, Jie & Wang, Qian & Lu, Chunmei
- 252-259 Study on mechanism and factors affecting the gas leakage through clearance seal at nano-level by molecular dynamics method
by Qi, Yingxia & Meng, Xiangqi & Mu, Defu & Sun, Yangliu & Zhang, Hua
- 260-275 Determination of optimum geothermal Rankine cycle parameters utilizing coaxial heat exchanger
by Mokhtari, Hamid & Hadiannasab, Hasti & Mostafavi, Mostafa & Ahmadibeni, Ali & Shahriari, Behrooz
- 276-286 System design and control for waste heat recovery of automotive engines based on Organic Rankine Cycle
by Shi, Rongqi & He, Tianqi & Peng, Jie & Zhang, Yangjun & Zhuge, Weilin
- 287-301 Power plant selection for medium to high enthalpy geothermal resources of Turkey
by Kivanc Ates, H. & Serpen, U.
- 302-312 Dynamic photovoltaic greenhouse: Energy balance in completely clear sky condition during the hot period
by Marucci, Alvaro & Cappuccini, Andrea
- 313-323 Modelling the performance parameters of a horizontal falling film absorber with aqueous (lithium, potassium, sodium) nitrate solution using artificial neural networks
by Álvarez, María E. & Hernández, José A. & Bourouis, Mahmoud
- 324-334 Effects of electricity-price policy on electricity demand and manufacturing output
by Kwon, Sanguk & Cho, Seong-Hoon & Roberts, Roland K. & Kim, Hyun Jae & Park, Kihyun & Edward Yu, T.
- 335-342 Comparison of various milling modes combined to the enzymatic hydrolysis of lignocellulosic biomass for bioenergy production: Glucose yield and energy efficiency
by Licari, A. & Monlau, F. & Solhy, A. & Buche, P. & Barakat, A.
- 343-353 Calcium looping with supercritical CO2 cycle for decarbonisation of coal-fired power plant
by Hanak, Dawid P. & Manovic, Vasilije
- 354-364 An experimental evaluation of the methodology proposed for the monitoring and certification of CO2 emissions from heavy-duty vehicles in Europe
by Fontaras, Georgios & Grigoratos, Theodoros & Savvidis, Dimitrios & Anagnostopoulos, Konstantinos & Luz, Raphael & Rexeis, Martin & Hausberger, Stefan
- 365-374 Forecasting energy market indices with recurrent neural networks: Case study of crude oil price fluctuations
by Wang, Jie & Wang, Jun
- 375-387 Analysis of a solar-aided coal-fired power generation system based on thermo-economic structural theory
by Zhai, Rongrong & Liu, Hongtao & Li, Chao & Zhao, Miaomiao & Yang, Yongping
- 388-396 Variations in energy use and output growth dynamics: An assessment for intertemporal and contemporaneous relationship
by Rashid, Abdul & Kandemir, Ӧzge
- 397-405 Case study on industrial surplus heat of steel plants for district heating in Northern China
by Li, Yemao & Xia, Jianjun & Fang, Hao & Su, Yingbo & Jiang, Yi
- 406-415 Estimating potential trade links in the international crude oil trade: A link prediction approach
by Guan, Qing & An, Haizhong & Gao, Xiangyun & Huang, Shupei & Li, Huajiao
- 416-426 An integrated multi-objective optimization model for determining the optimal solution in the solar thermal energy system
by Kim, Jimin & Hong, Taehoon & Jeong, Jaemin & Lee, Myeonghwi & Koo, Choongwan & Lee, Minhyun & Ji, Changyoon & Jeong, Jaewook
- 427-435 Numerical solution of radiation view factors within a thermoelectric device
by Barry, Matthew & Ying, Justin & Durka, Michael J. & Clifford, Corey E. & Reddy, B.V.K. & Chyu, Minking K.
- 436-443 Crude oil price decision under considering emergency and release of strategic petroleum reserves
by Liao, Shujie & Wang, Fengxia & Wu, Ting & Pan, Wei
- 444-452 Power reduction optimization with swarm based technique in electric power assist steering system
by Abu Hanifah, Rabiatuladawiyah & Toha, Siti Fauziah & Hassan, Mohd Khair & Ahmad, Salmiah
- 453-464 Peat briquette as an alternative to cooking fuel: A techno-economic viability assessment in Rwanda
by Hakizimana, Jean de Dieu K. & Kim, Hyung-Taek
- 465-472 Energy efficient building block design: An exergy perspective
by Mert, Yelda & Saygın, Nicel
- 473-490 Comparative assessment of Organic Rankine Cycle integration for low temperature geothermal heat source applications
by Imran, Muhammad & Usman, Muhammad & Park, Byung-Sik & Yang, Youngmin
- 491-501 Adsorption cooling cycles: Insights into carbon dioxide adsorption on activated carbons
by Fan, Wu & Chakraborty, Anutosh & Kayal, Sibnath
- 502-515 Energy saving potential in existing industrial compressors
by Vittorini, Diego & Cipollone, Roberto
- 516-527 An uncertainty-based design optimization method for district cooling systems
by Gang, Wenjie & Augenbroe, Godfried & Wang, Shengwei & Fan, Cheng & Xiao, Fu
- 528-536 Experimental and numerical investigation of transient phenomena in vacuum ejectors
by Jafarian, Ali & Azizi, Mohammad & Forghani, Pezhman
- 537-549 Thermodynamic analysis of the squid mantle muscles and giant axon during slow swimming and jet escape propulsion
by Yalçınkaya, Bahar Hazal & Erikli, Şükrü & Özilgen, Burak Arda & Olcay, Ali Bahadır & Sorgüven, Esra & Özilgen, Mustafa
- 550-558 Solar and wind exergy potentials for Mars
by Delgado-Bonal, Alfonso & Martín-Torres, F. Javier & Vázquez-Martín, Sandra & Zorzano, María-Paz
- 559-566 Development and validation of a wide-area model of hourly aggregate solar power generation
by Lingfors, D. & Widén, J.
- 567-575 A novel method for evaluating effects of promoters on hydrate formation
by Cai, Jing & Xu, Chun-Gang & Lin, Fu-Hua & Yu, Hai-Zhu & Li, Xiao-Sen
- 576-585 Thermodynamic analysis and system design of a novel split cycle engine concept
by Dong, Guangyu & Morgan, Robert E. & Heikal, Morgan R.
- 586-595 Optimal operation of large district heating networks through fast fluid-dynamic simulation
by Guelpa, Elisa & Toro, Claudia & Sciacovelli, Adriano & Melli, Roberto & Sciubba, Enrico & Verda, Vittorio
- 596-604 Climate change and electricity demand in Brazil: A stochastic approach
by Trotter, Ian M. & Bolkesjø, Torjus Folsland & Féres, José Gustavo & Hollanda, Lavinia
- 605-620 The ORC-PD: A versatile tool for fluid selection and Organic Rankine Cycle unit design
by Pezzuolo, Alex & Benato, Alberto & Stoppato, Anna & Mirandola, Alberto
- 621-629 Precombustion CO2 capture using a hybrid process of adsorption and gas hydrate formation
by Zhong, Dong-Liang & Wang, Jia-Le & Lu, Yi-Yu & Li, Zheng & Yan, Jin
- 630-636 Application of adaptive neuro-fuzzy methodology for performance investigation of a power-augmented vertical axis wind turbine
by Chong, W.T. & Gwani, M. & Shamshirband, S. & Muzammil, W.K. & Tan, C.J. & Fazlizan, A. & Poh, S.C. & Petković, Dalibor & Wong, K.H.
- 637-649 Combustion characteristics analysis of a free-piston engine generator coupling with dynamic and scavenging
by Yuan, Chenheng & Feng, Huihua & He, Yituan & Xu, Jing
- 650-659 Thermodynamic and energy saving benefits of hydraulic free-piston engines
by Zhao, Zhenfeng & Wang, Shan & Zhang, Shuanlu & Zhang, Fujun
Printed from https://ideas.repec.org/s/eee/energy126.html
