Contact information of Elsevier
Serial Information
Order information: Postal: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
Web:
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
To be notified about new items in this series: Free volume/issue alert on ScienceDirect (see also
NEP)
Download restrictions: Full text for ScienceDirect subscribers only
Editor: J. Yan
Description: Applied Energy provides a forum for information on innovation, research, development and demonstration in the areas of energy conversion and conservation, the optimal use of energy resources, analysis and optimization of energy processes, mitigation of environmental pollutants, and sustainable energy systems. The journal publishes original papers, review articles, technical notes, and letters to editor. Authors are encouraged to submit manuscripts which bridge the gaps between research, development and implementation. The breadth of coverage ranges from innovative technologies and systems of both fossil and renewable energy to the economic industrial and domestic use of energy with no or minor impact on the environment. Applied Energy is also concerned with the attendant problems of modeling and forecasting, conservation strategies, and the environmental, social and economic impacts of energy policies and usage, including climate change mitigation and other environmental pollution reduction.
Series handle: RePEc:eee:appene
ISSN: 0306-2619
Citations RSS feed: at CitEc
Impact factors
Access and download statisticsTop item:
Corrections
All material on this site has been provided by the respective publishers and authors. You can help
correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene. See general information about how to correct material in RePEc.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .
Content
2012, Volume 95, Issue C
- 253-266 A decision support model for reducing electric energy consumption in elementary school facilities
by Hong, Taehoon & Koo, Choongwan & Jeong, Kwangbok
- 267-275 A comparison of performance of higher alcohols/diesel fuel blends in a diesel engine
by Campos-Fernández, Javier & Arnal, Juan M. & Gómez, Jose & Dorado, M. Pilar
- 276-284 Dynamic modelling of an activated carbon–methanol adsorption refrigeration tube with considerations of interfacial convection and transient pressure process
by Zhao, Yongling & Hu, Eric & Blazewicz, Antoni
- 285-294 Incorporating IGCC and CaO sorption-enhanced process for power generation with CO2 capture
by Chen, Shiyi & Xiang, Wenguo & Wang, Dong & Xue, Zhipeng
- 295-299 Fly ash recirculation by bottom feeding on a circulating fluidized bed boiler co-burning coal sludge and coal
by Duan, Lunbo & Liu, Daoyin & Chen, Xiaoping & Zhao, Changsui
- 300-304 Introducing District Heating in a Norwegian town – Potential for reduced Local and Global Emissions
by Gebremedhin, Alemayehu
- 305-311 Decrease of energy demand for bioethanol-based polygeneration system through case study
by Zhou, Wei & Yang, Hongxing & Rissanen, Markku & Nygren, Bertil & Yan, Jinyue
2012, Volume 94, Issue C
- 1-12 Development of a novel common-rail type Dimethyl ether (DME) injector
by Xu, Shuaiqing & Wang, Yang & Zhang, Xiao & Zhen, Xudong & Tao, Chengjun
- 13-21 Design of image-based control loops for industrial combustion processes
by Chen, Junghui & Chang, Yu-Hsiang & Cheng, Yi-Cheng & Hsu, Chen-Kai
- 22-33 Development of approach for reliability assessment of pipeline network systems
by Rimkevicius, Sigitas & Kaliatka, Algirdas & Valincius, Mindaugas & Dundulis, Gintautas & Janulionis, Remigijus & Grybenas, Albertas & Zutautaite, Inga
- 34-40 An experimental study on the recuperative low temperature solar Rankine cycle using R245fa
by Wang, J.L. & Zhao, L. & Wang, X.D.
- 41-47 Cooling dominated Hybrid Ground Source Heat Pump System application
by Sagia, Z. & Rakopoulos, C. & Kakaras, E.
- 48-57 Experimental investigation into methane hydrate production during three-dimensional thermal huff and puff
by Li, Xiao-Sen & Wang, Yi & Duan, Li-Ping & Li, Gang & Zhang, Yu & Huang, Ning-Sheng & Chen, Duo-Fu
- 58-64 Parametric analysis of a new combined cooling, heating and power system with transcritical CO2 driven by solar energy
by Wang, Jiangfeng & Zhao, Pan & Niu, Xiaoqiang & Dai, Yiping
- 65-70 An annual load forecasting model based on support vector regression with differential evolution algorithm
by Wang, Jianjun & Li, Li & Niu, Dongxiao & Tan, Zhongfu
- 71-83 Experimental investigation of a Kaplan draft tube – Part II: Off-design conditions
by Jonsson, P.P. & Mulu, B.G. & Cervantes, M.J.
- 84-88 Ethanolysis of camelina oil under supercritical condition with hexane as a co-solvent
by Muppaneni, Tapaswy & Reddy, Harvind K. & Patil, Prafulla D. & Dailey, Peter & Aday, Curtis & Deng, Shuguang
- 89-97 Atmospheric fluidized bed gasification of untreated and leached olive residue, and co-gasification of olive residue, reed, pine pellets and Douglas fir wood chips
by Link, Siim & Arvelakis, Stelios & Paist, Aadu & Martin, Andrew & Liliedahl, Truls & Sjöström, Krister
- 98-108 Modeling the transition towards a sustainable energy production in developing nations
by Thiam, Djiby-Racine & Benders, René M.J. & Moll, Henri C.
- 109-116 Assessment of oxy-fuel, pre- and post-combustion-based carbon capture for future IGCC plants
by Kunze, Christian & Spliethoff, Hartmut
- 117-128 Experimental study on the effects of HP and LP EGR in an automotive turbocharged diesel engine
by Zamboni, Giorgio & Capobianco, Massimo
- 129-140 Hydrothermal pretreatment of rice straw biomass: A potential and promising method for enhanced methane production
by Chandra, R. & Takeuchi, H. & Hasegawa, T.
- 141-147 Damköhler number as a descriptive parameter in methanol steam reforming and its integration with absorption heat pump system
by Wijaya, Willy Yanto & Kawasaki, Shunsuke & Watanabe, Hirotatsu & Okazaki, Ken
- 148-155 Lurching towards markets for power: China’s electricity policy 1985–2007
by Zhao, Xiaoli & Lyon, Thomas P. & Song, Cui
- 156-165 The assessment of the contribution of short-term wind power predictions to the efficiency of stand-alone hybrid systems
by Tascikaraoglu, A. & Uzunoglu, M. & Vural, B.
- 166-173 Numerical study of a butanol/heptane fuelled Homogeneous Charge Compression Ignition (HCCI) engine utilizing negative valve overlap
by Visakhamoorthy, Sona & Wen, John Z. & Sivoththaman, Siva & Koch, Charles Robert
- 174-181 Corrosion effects between molten salts and thermal storage material for concentrated solar power plants
by Guillot, Stéphanie & Faik, Abdessamad & Rakhmatullin, Aydar & Lambert, Julien & Veron, Emmanuel & Echegut, Patrick & Bessada, Catherine & Calvet, Nicolas & Py, Xavier
- 182-191 Improving fuel quality by whole crude oil hydrotreating: A kinetic model for hydrodeasphaltenization in a trickle bed reactor
by Jarullah, A.T. & Mujtaba, I.M. & Wood, A.S.
- 192-201 Optimal siting and size of bioenergy facilities using geographic information system
by Sultana, Arifa & Kumar, Amit
- 202-214 What drives the change in UK household energy expenditure and associated CO2 emissions? Implication and forecast to 2020
by Chitnis, Mona & Hunt, Lester C.
- 215-223 The role of external heat exchangers in oxy-fuel circulating fluidized bed
by Bolea, Irene & Romeo, Luis M. & Pallarés, David
- 224-231 Experimental analysis of biofuel as an alternative fuel for diesel engines
by Varuvel, Edwin Geo & Mrad, Nadia & Tazerout, Mohand & Aloui, Fethi
- 232-243 Experimental investigation and thermodynamic performance analysis of a solar dryer using an evacuated-tube air collector
by Lamnatou, Chr. & Papanicolaou, E. & Belessiotis, V. & Kyriakis, N.
- 244-250 A dynamic model based on the piston flow concept for the thermal characterization of solar collectors
by Amrizal, N. & Chemisana, D. & Rosell, J.I. & Barrau, J.
- 251-256 Forecasting nonlinear time series of energy consumption using a hybrid dynamic model
by Lee, Yi-Shian & Tong, Lee-Ing
- 257-269 Effects of various operating conditions on the hydrogen absorption processes in a metal hydride tank
by Jiao, Kui & Li, Xianguo & Yin, Yan & Zhou, Yibo & Yu, Shuhai & Du, Qing
- 270-284 Development of benchmark models for the Egyptian residential buildings sector
by Attia, Shady & Evrard, Arnaud & Gratia, Elisabeth
- 285-294 Minimizing specific energy consumption of oxygen enrichment in polymeric hollow fiber membrane modules
by Meriläinen, Arttu & Seppälä, Ari & Kauranen, Pertti
- 295-302 Combined heat transfer in multi-layered radiation shields for vacuum insulation panels: Theoretical/numerical analyses and experiment
by Kim, Jongmin & Jang, Choonghyo & Song, Tae-Ho
- 303-308 Potential of using organic fertilizer to cultivate Chlorella vulgaris for biodiesel production
by Lam, Man Kee & Lee, Keat Teong
- 309-329 Porous metal materials for polymer electrolyte membrane fuel cells – A review
by Yuan, Wei & Tang, Yong & Yang, Xiaojun & Wan, Zhenping
- 330-337 Energy optimization of building design for different housing units in apartment buildings
by Yao, Jian
- 338-348 The potential of increasing cooling set-points in air-conditioned offices in the UK
by Lakeridou, Michelle & Ucci, Marcella & Marmot, Alexi & Ridley, Ian
- 349-354 Chrysomya megacephala (Fabricius) larvae: A new biodiesel resource
by Li, Zhuoxue & Yang, Depo & Huang, Miaoling & Hu, Xinjun & Shen, Jiangang & Zhao, Zhimin & Chen, Jianping
- 355-363 Linking occupants’ thermal perception and building thermal performance in naturally ventilated school buildings
by Liang, Han-Hsi & Lin, Tzu-Ping & Hwang, Ruey-Lung
- 364-374 Comparison of numerical simulation results and experimental data during cold-start of polymer electrolyte fuel cells
by Ko, Johan & Ju, Hyunchul
- 375-384 Coal flame characterization by means of digital image processing in a semi-industrial scale PF swirl burner
by González-Cencerrado, A. & Peña, B. & Gil, A.
- 385-394 Effect of K and CeO2 promoters on the activity of Co/SiO2 catalyst for liquid fuel production from syngas
by Khobragade, Murnal & Majhi, Sachchit & Pant, K.K.
- 395-405 Time-dependent plug-in hybrid electric vehicle charging based on national driving patterns and demographics
by Kelly, Jarod C. & MacDonald, Jason S. & Keoleian, Gregory A.
- 406-414 Underground coal-air gasification based solid oxide fuel cell system
by Prabu, V. & Jayanti, S.
2012, Volume 93, Issue C
- 2-10 District heating and cooling: Review of technology and potential enhancements
by Rezaie, Behnaz & Rosen, Marc A.
- 11-17 Feasibility analysis of an indirect heat pump assisted solar domestic hot water system
by Sterling, S.J. & Collins, M.R.
- 18-23 Assessment of a closed thermochemical energy storage using energy and exergy methods
by Abedin, Ali Haji & Rosen, Marc A.
- 24-32 Measuring buildings for sustainability: Comparing the initial and retrofit ecological footprint of a century home – The REEP House
by Bin, Guoshu & Parker, Paul
- 33-38 Thermal design and management for performance optimization of solar thermoelectric generator
by Xiao, Jinsheng & Yang, Tianqi & Li, Peng & Zhai, Pengcheng & Zhang, Qingjie
- 39-44 Numerical estimation of the effective electrical conductivity in carbon paper diffusion media
by Zamel, Nada & Li, Xianguo & Shen, Jun
- 45-52 Numerical modeling of an S809 airfoil under dynamic stall, erosion and high reduced frequencies
by Gharali, Kobra & Johnson, David A.
- 53-58 Absorption of nitric oxide from simulated flue gas using different absorbents at room temperature and atmospheric pressure
by Yu, Hesheng & Zhu, Qunyi & Tan, Zhongchao
- 59-64 Development of direct resistive heating method for SO3 decomposition in the S–I cycle for hydrogen production
by Li, Hongqiang & Tan, Geng & Zhang, Wenyu & Suppiah, Sam
- 65-70 Investigation on crystallization of TiO2–water nanofluids and deionized water
by Mo, Songping & Chen, Ying & Jia, Lisi & Luo, Xianglong
- 71-79 Multicomponent evaporation model for pure and blended biodiesel droplets in high temperature convective environment
by Saha, Kaushik & Abu-Ramadan, Ehab & Li, Xianguo
- 80-89 Measurement of current distribution in a proton exchange membrane fuel cell with various flow arrangements – A parametric study
by Alaefour, Ibrahim & Karimi, G. & Jiao, Kui & Li, X.
- 90-97 Accelerated durability testing via reactants relative humidity cycling on PEM fuel cells
by Panha, Karachakorn & Fowler, Michael & Yuan, Xiao-Zi & Wang, Haijiang
- 98-105 Dynamic modeling, optimization and control of power density in a PEM fuel cell
by Meidanshahi, Vida & Karimi, Gholamreza
- 107-115 Numerical analysis of an internal methane reforming solid oxide fuel cell with fuel recycling
by Eveloy, Valérie
- 116-124 Novel error propagation approach for reducing H2S/O2 reaction mechanism
by Selim, H. & Gupta, A.K. & Sassi, M.
- 125-131 Performance enhancement of propane pre-cooled mixed refrigerant LNG plant
by Mortazavi, A. & Somers, C. & Hwang, Y. & Radermacher, R. & Rodgers, P. & Al-Hashimi, S.
- 132-137 A study towards “greener” construction
by Bassioni, G.
- 138-147 A high efficiency solar air conditioner using concentrating photovoltaic/thermal collectors
by Al-Alili, A. & Hwang, Y. & Radermacher, R. & Kubo, I.
- 148-159 Production of methane from anaerobic digestion of jatropha and pongamia oil cakes
by Chandra, R. & Vijay, V.K. & Subbarao, P.M.V. & Khura, T.K.
- 160-167 Modeling of a solar powered absorption cycle for Abu Dhabi
by Al-Alili, A. & Islam, M.D. & Kubo, I. & Hwang, Y. & Radermacher, R.
- 168-175 Integrating sugar beet pulp storage, hydrolysis and fermentation for fuel ethanol production
by Zheng, Yi & Yu, Chaowei & Cheng, Yu-Shen & Lee, Christopher & Simmons, Christopher W. & Dooley, Todd M. & Zhang, Ruihong & Jenkins, Bryan M. & VanderGheynst, Jean S.
- 176-183 Ability of a mutant strain of the microalga Chlorella sp. to capture carbon dioxide for biogas upgrading
by Kao, Chien-Ya & Chiu, Sheng-Yi & Huang, Tzu-Ting & Dai, Le & Hsu, Ling-Kang & Lin, Chih-Sheng
- 184-192 Evaluation, comparison and validation of deposition criteria for numerical simulation of slagging
by Wieland, Christoph & Kreutzkam, Benjamin & Balan, Gundula & Spliethoff, Hartmut
- 193-204 Comparative economic assessment of ABE fermentation based on cellulosic and non-cellulosic feedstocks
by Kumar, Manish & Goyal, Yogesh & Sarkar, Abhijit & Gayen, Kalyan
- 205-211 Estimation of the potential of rice straw for ethanol production and the optimum facility size for different regions in Vietnam
by Diep, Nhu Quynh & Fujimoto, Shinji & Minowa, Tomoaki & Sakanishi, Kinya & Nakagoshi, Nobukazu
- 215-228 The effect of firing biogas on the performance and operating characteristics of simple and recuperative cycle gas turbine combined heat and power systems
by Kang, Do Won & Kim, Tong Seop & Hur, Kwang Beom & Park, Jung Keuk
- 229-236 Mechanisms of microwave irradiation pretreatment for enhancing anaerobic digestion of cattail by rumen microorganisms
by Hu, Zhen-Hu & Yue, Zhen-Bo & Yu, Han-Qing & Liu, Shao-Yang & Harada, Hideki & Li, Yu-You
- 237-244 Hydrolysis characteristics of sugarcane bagasse pretreated by dilute acid solution in a microwave irradiation environment
by Chen, Wei-Hsin & Ye, Song-Ching & Sheen, Herng-Kuang
- 245-250 Experimental assessment of toxic phorbol ester in oil, biodiesel and seed cake of Jatropha curcas and use of biodiesel in diesel engine
by Prasad, Lalit & Pradhan, Subhalaxmi & Das, L.M. & Naik, S.N.
- 251-260 Technical assessment of bioenergy recovery from cotton stalks through anaerobic digestion process and the effects of inexpensive pre-treatments
by Adl, Mehrdad & Sheng, Kuichuan & Gharibi, Arash
- 261-267 Performance analysis of Isopropanol–Acetone–Hydrogen chemical heat pump
by Guo, Jiangfeng & Huai, Xiulan & Li, Xunfeng & Xu, Mingtian
- 268-276 Simulation model of a greenhouse with a heat-pipe heating system
by Du, Jun & Bansal, Pradeep & Huang, Bo
- 277-287 A comprehensive investigation on the emissions of ethanol HCCI engines
by Viggiano, Annarita & Magi, Vinicio
- 288-295 Environmental consequences of the use of batteries in low carbon systems: The impact of battery production
by McManus, M.C.
- 296-304 Experimental investigation of bio-butanol laminar non-premixed flamelets
by Agathou, Maria S. & Kyritsis, Dimitrios C.
- 305-318 Quantitative assessment of bioenergy from crop stalk resources in Inner Mongolia, China
by Liu, Jin & Wu, Jianguo & Liu, Fengqiao & Han, Xingguo
- 319-326 Real-time prediction models for output power and efficiency of grid-connected solar photovoltaic systems
by Su, Yan & Chan, Lai-Cheong & Shu, Lianjie & Tsui, Kwok-Leung
- 327-336 Estimation of annual energy output from a tidal barrage using two different methods
by Xia, Junqiang & Falconer, Roger A. & Lin, Binliang & Tan, Guangming
- 337-347 An approach for developing sensitive design parameter guidelines to reduce the energy requirements of low-rise apartment buildings
by Yildiz, Yusuf & Korkmaz, Koray & Göksal Özbalta, Türkan & Durmus Arsan, Zeynep
- 348-356 Learning rates and future cost curves for fossil fuel energy systems with CO2 capture: Methodology and case studies
by Li, Sheng & Zhang, Xiaosong & Gao, Lin & Jin, Hongguang
- 357-363 Innovative design of non-convective zone of salt gradient solar pond for optimum thermal performance and stability
by Husain, M. & Sharma, G. & Samdarshi, S.K.
- 364-370 Probabilistic forecasting of the wave energy flux
by Pinson, P. & Reikard, G. & Bidlot, J.-R.
- 371-389 State of the art of thermal storage for demand-side management
by Arteconi, A. & Hewitt, N.J. & Polonara, F.
- 390-403 Human powered MEMS-based energy harvest devices
by Sue, Chung-Yang & Tsai, Nan-Chyuan
- 404-412 Optimal sizing of small wind/battery systems considering the DC bus voltage stability effect on energy capture, wind speed variability, and load uncertainty
by Lujano-Rojas, Juan M. & Dufo-López, Rodolfo & Bernal-Agustín, José L.
- 413-421 Large scale integration of photovoltaics in cities
by Strzalka, Aneta & Alam, Nazmul & Duminil, Eric & Coors, Volker & Eicker, Ursula
- 422-431 Voltage regulation capability of a prototype Static VAr Compensator for wind applications
by Boynuegri, A.R. & Vural, B. & Tascikaraoglu, A. & Uzunoglu, M. & Yumurtacı, R.
- 432-443 A novel hybrid ensemble learning paradigm for nuclear energy consumption forecasting
by Tang, Ling & Yu, Lean & Wang, Shuai & Li, Jianping & Wang, Shouyang
- 444-448 Experimental wind load model for heliostats
by Zang, Chuncheng & Wang, Zhifeng & Liu, Hong & Ruan, Yi
- 449-456 Gasification of high viscous slurry R&D on atomization and numerical simulation
by Jakobs, T. & Djordjevic, N. & Fleck, S. & Mancini, M. & Weber, R. & Kolb, T.
- 457-465 Condensed Rotational Separation of CO2
by van Benthum, R.J. & van Kemenade, H.P. & Brouwers, J.J.H. & Golombok, M.
- 466-478 In-cylinder diesel spray combustion simulations using parallel computation: A performance benchmarking study
by Pang, Kar Mun & Ng, Hoon Kiat & Gan, Suyin
- 479-487 Resorption system for cold storage and long-distance refrigeration
by Bao, H.S. & Wang, R.Z. & Oliveira, R.G. & Li, T.X.
- 488-495 Energy information integration based on EMS in paper mill
by Wu, Bo & Li, Jigeng & Liu, Huanbin & Zhang, Zhanbo & Zhou, Yanming & Zhao, Ning
- 496-506 Multi criteria sustainability assessment of biogas production in Kenya
by Nzila, Charles & Dewulf, Jo & Spanjers, Henri & Tuigong, David & Kiriamiti, Henry & van Langenhove, Herman
- 507-516 Submerged finned heat exchanger latent heat storage design and its experimental verification
by Chiu, Justin N.W. & Martin, Viktoria
- 517-522 Commercial-scale demonstration of pollutant emission reduction and energy saving for industrial boilers by employing water/oil emulsified fuel
by Chelemuge, & Namioka, Tomoaki & Yoshikawa, Kunio & Takeshita, Masanori & Fujiwara, Koichi
- 523-531 Heat loss characteristics of trapezoidal cavity receiver for solar linear concentrating system
by Natarajan, Sendhil Kumar & Reddy, K.S. & Mallick, Tapas Kumar
- 532-540 Simulation investigation on solar powered desiccant coated heat exchanger cooling system
by Ge, T.S. & Dai, Y.J. & Li, Y. & Wang, R.Z.
- 541-548 Simulation and analysis of different adiabatic Compressed Air Energy Storage plant configurations
by Hartmann, Niklas & Vöhringer, O. & Kruck, C. & Eltrop, L.
- 549-555 Effectiveness–NTU correlation for low temperature PCM encapsulated in spheres
by Amin, N.A.M. & Bruno, F. & Belusko, M.
- 556-563 Reducing fuel consumption through modular vehicle architectures
by Carvalho, Irene & Baier, Thomas & Simoes, Ricardo & Silva, Arlindo
- 564-569 Cumulative exergy analysis of ice thermal storage air conditioning system
by Pu, Jing & Liu, Guilian & Feng, Xiao
- 570-574 Solid state magnetic refrigerator
by Silva, D.J. & Bordalo, B.D. & Pereira, A.M. & Ventura, J. & Araújo, J.P.
- 575-582 The impact of consumers’ feedback preferences on domestic electricity consumption
by Vassileva, Iana & Odlare, Monica & Wallin, Fredrik & Dahlquist, Erik
- 583-595 Evaluation of the suitability of empirically-based models for predicting energy performance of centrifugal water chillers with variable chilled water flow
by Lee, Tzong-Shing & Liao, Ke-Yang & Lu, Wan-Chen
- 596-605 Modelling carbon emissions of UK dwellings – The Tarbase Domestic Model
by Jenkins, D.P. & Peacock, A.D. & Banfill, P.F.G. & Kane, D. & Ingram, V. & Kilpatrick, R.
- 606-613 Effects of biomass particle size during cofiring under air-fired and oxyfuel conditions
by Holtmeyer, Melissa L. & Kumfer, Benjamin M. & Axelbaum, Richard L.
- 614-623 Allocation of fuel costs and CO2-emissions to heat and power in an industrial CHP plant: Case integrated pulp and paper mill
by Holmberg, Henrik & Tuomaala, Mari & Haikonen, Turo & Ahtila, Pekka
- 624-636 Trigeneration scheme for energy efficiency enhancement in a natural gas processing plant through turbine exhaust gas waste heat utilization
by Popli, Sahil & Rodgers, Peter & Eveloy, Valerie
- 637-647 Development and validation of a finite element model for water – CO2 coaxial gas-coolers
by Sánchez, D. & Cabello, R. & Llopis, R. & Torrella, E.
- 648-654 Thermophilic anaerobic co-digestion of oil palm empty fruit bunches with palm oil mill effluent for efficient biogas production
by O-Thong, Sompong & Boe, Kanokwan & Angelidaki, Irini
- 655-667 Leading-edge redesign of a turbomachinery blade and its effect on aerodynamic performance
by Zhang, Weihao & Zou, Zhengping & Ye, Jian
- 668-674 Stochastic modeling of the energy supply system with uncertain fuel price – A case of emerging technologies for distributed power generation
by Mirkhani, Sh. & Saboohi, Y.
- 675-679 On the use of single-film models to describe the oxy-fuel combustion of pulverized coal char
by Geier, M. & Shaddix, C.R. & Davis, K.A. & Shim, H.-S.
- 680-685 Pelletization of torrefied sawdust and properties of torrefied pellets
by Li, Hui & Liu, Xinhua & Legros, Robert & Bi, Xiaotao T. & Jim Lim, C. & Sokhansanj, Shahab
- 686-694 Towards net zero energy design for low-rise residential buildings in subtropical Hong Kong
by Fong, K.F. & Lee, C.K.
- 695-706 Experimental investigation of a Kaplan draft tube – Part I: Best efficiency point
by Mulu, B.G. & Jonsson, P.P. & Cervantes, M.J.
- 707-721 The investigation of active Ni/YSZ interlayer for Cu-based direct-methane solid oxide fuel cells
by Sariboğa, Vedat & Öksüzömer, Faruk
- 722-732 Experimental investigation into gas production from methane hydrate in sediment by depressurization in a novel pilot-scale hydrate simulator
by Li, Xiao-Sen & Yang, Bo & Zhang, Yu & Li, Gang & Duan, Li-Ping & Wang, Yi & Chen, Zhao-Yang & Huang, Ning-Sheng & Wu, Hui-Jie
- 733-741 Investigations of the temperature distribution in proton exchange membrane fuel cells
by Jung, Chi-Young & Shim, Hyo-Sub & Koo, Sang-Man & Lee, Sang-Hwan & Yi, Sung-Chul
- 742-749 Fractal dimension of wind speed time series
by Chang, Tian-Pau & Ko, Hong-Hsi & Liu, Feng-Jiao & Chen, Pai-Hsun & Chang, Ying-Pin & Liang, Ying-Hsin & Jang, Horng-Yuan & Lin, Tsung-Chi & Chen, Yi-Hwa
- 750-752 Comments on “PVTxy properties of CO2 mixtures relevant for CO2 capture, transport and storage: Review of available experimental data and theoretical models”
by Privat, Romain & Jaubert, Jean-Noël
- 753-754 Responses to ‘Comments on PVTxy properties of CO2 mixtures relevant for CO2 capture, transport and storage: Review of available experimental data and theoretical models’
by Li, Hailong & Jakobsen, Jana P. & Wilhelmsen, Øivind & Yan, Jinyue
2012, Volume 92, Issue C
- 1-8 Developing a mechanical roadway system for waste energy capture of vehicles and electric generation
by Ting, Chen-Ching & Tsai, Da-Yi & Hsiao, Chung-Cheng
- 9-16 CO2 weighted convergence across the EU-25 countries (1920–2007)
by Herrerias, M.J.
- 17-25 Alternative heat rejection methods for power plants
by Leffler, Robert A. & Bradshaw, Craig R. & Groll, Eckhard A. & Garimella, Suresh V.
- 26-37 Forecasting natural gas consumption
by Soldo, Božidar
- 38-43 Characterization of H2 photoproduction by a new marine green alga, Platymonas helgolandica var. tsingtaoensis
by Zhang, Yanting & Fan, Xiaolei & Yang, Zhiman & Wang, Huanyu & Yang, Dawei & Guo, Rongbo
- 44-50 Cylinders diagnosis system of a 1MW internal combustion engine through vibrational signal processing using DWT technique
by Barelli, L. & Barluzzi, E. & Bidini, G. & Bonucci, F.
- 51-56 Assessing price clustering in European Carbon Markets
by Palao, Fernando & Pardo, Angel
- 57-64 Fate of sulfur with H2S injection in methane/air flames
by Selim, H. & Al Shoaibi, A. & Gupta, A.K.
- 65-75 Sensitivity analysis of the numerical study on the thermal performance of a packed-bed molten salt thermocline thermal storage system
by Xu, Chao & Wang, Zhifeng & He, Yaling & Li, Xin & Bai, Fengwu
- 76-83 Financial viability of energy-efficiency measures in a new detached house design in Finland
by Saari, Arto & Kalamees, Targo & Jokisalo, Juha & Michelsson, Rasmus & Alanne, Kari & Kurnitski, Jarek
- 84-91 Evaluation and assessment of demand response potential applied to the meat industry
by Alcázar-Ortega, Manuel & Álvarez-Bel, Carlos & Escrivá-Escrivá, Guillermo & Domijan, Alexander
- 92-98 A life cycle assessment of biodiesel derived from the “niche filling” energy crop camelina in the USA
by Krohn, Brian J. & Fripp, Matthias
- 99-108 Ongoing commissioning of water-cooled electric chillers using benchmarking models
by Monfet, Danielle & Zmeureanu, Radu
- 109-132 A review analyzing the industrial biodiesel production practice starting from vegetable oil refining
by Santori, Giulio & Di Nicola, Giovanni & Moglie, Matteo & Polonara, Fabio
- 133-146 Controlling cyclic combustion timing variations using a symbol-statistics predictive approach in an HCCI engine
by Ghazimirsaied, Ahmad & Koch, Charles Robert
- 147-161 A review of on-chip micro-evaporation: Experimental evaluation of liquid pumping and vapor compression driven cooling systems and control
by Marcinichen, Jackson Braz & Olivier, Jonathan A. & Oliveira, Vinicius de & Thome, John R.
- 162-167 Direct rebound effect for passenger transport: Empirical evidence from Hong Kong
by Wang, H. & Zhou, D.Q. & Zhou, P. & Zha, D.L.
- 168-174 Improved energy management of chiller systems by multivariate and data envelopment analyses
by Yu, F.W. & Chan, K.T.
- 175-184 Decentralized cooling in district heating network: System simulation and parametric study
by Udomsri, Seksan & Bales, Chris & Martin, Andrew R. & Martin, Viktoria
- 185-193 Influence of droplet mutual interaction on carbon dioxide capture process in sprays
by Chen, Wei-Hsin & Hou, Yu-Lin & Hung, Chen-I
- 194-203 Thermodynamic analysis of a transcritical CO2 power cycle driven by solar energy with liquified natural gas as its heat sink
by Song, Yuhui & Wang, Jiangfeng & Dai, Yiping & Zhou, Enmin
- 204-210 Impact of roof integrated PV orientation on the residential electricity peak demand
by Sadineni, Suresh B. & Atallah, Fady & Boehm, Robert F.
- 211-217 A study on the optimum insulation thicknesses of various types of external walls with respect to different materials, fuels and climate zones in Turkey
by Bektas Ekici, Betul & Aytac Gulten, Ayca & Aksoy, U. Teoman
- 218-223 Effect of support’s basic properties on hydrogen production in aqueous-phase reforming of glycerol and correlation between WGS and APR
by Guo, Yong & Azmat, Muhammad Usman & Liu, Xiaohui & Wang, Yanqin & Lu, Guanzhong
- 224-233 Preparation of TiO2 particles and their applications in the light scattering layer of a dye-sensitized solar cell
by Chou, Chuen-Shii & Guo, Ming-Geng & Liu, Kuan-Hung & Chen, Yi-Siang
- 234-239 Hydrothermal liquefaction of cellulose to bio-oil under acidic, neutral and alkaline conditions
by Yin, Sudong & Tan, Zhongchao
- 240-254 The role of clouds in improving the regression model for hourly values of diffuse solar radiation
by Furlan, Claudia & de Oliveira, Amauri Pereira & Soares, Jacyra & Codato, Georgia & Escobedo, João Francisco
- 255-268 Design criteria and optimization of heat recovery steam cycles for integrated reforming combined cycles with CO2 capture
by Martelli, Emanuele & Nord, Lars O. & Bolland, Olav
- 269-278 Visual preferences for wind turbines: Location, numbers and respondent characteristics
by Molnarova, Kristina & Sklenicka, Petr & Stiborek, Jiri & Svobodova, Kamila & Salek, Miroslav & Brabec, Elizabeth
- 279-285 Experimental investigation of high temperature and high pressure coal gasification
by Tremel, Alexander & Haselsteiner, Thomas & Kunze, Christian & Spliethoff, Hartmut
- 286-297 A comparison of 15 polymers for application in photovoltaic modules in PV-powered boats
by Gorter, T. & Reinders, A.H.M.E.
- 298-306 Investigation of a broadband TiO2/SiO2 optical thin-film filter for hybrid solar power systems
by Shou, Chunhui & Luo, Zhongyang & Wang, Tao & Shen, Weidong & Rosengarten, Gary & Wei, Wei & Wang, Cheng & Ni, Mingjiang & Cen, Kefa
- 307-314 Landfill gas upgrading with pilot-scale water scrubber: Performance assessment with absorption water recycling
by Läntelä, J. & Rasi, S. & Lehtinen, J. & Rintala, J.
- 315-321 A novel method to achieve selective emitter for silicon solar cell using low cost pattern-able a-Si thin films as the semi-transparent phosphorus diffusion barrier
by Chen, Da Ming & Liang, Zong Cun & Zhuang, Lin & Lin, Yang Huan & Shen, Hui
- 322-327 Temperature patterns in large scale wood pellet silo storage
by Larsson, Sylvia H. & Lestander, Torbjörn A. & Crompton, Dave & Melin, Staffan & Sokhansanj, Shahab
- 328-335 Case study: Energy savings for a deep-mine water reticulation system
by Vosloo, Jan & Liebenberg, Leon & Velleman, Douglas
- 336-342 Development of a novel refrigeration system for refrigerated trucks incorporating phase change material
by Liu, Ming & Saman, Wasim & Bruno, Frank
- 343-347 Experiences and results on a 0.8MWth oxy-fuel operation pilot-scale circulating fluidized bed
by Tan, Y. & Jia, L. & Wu, Y. & Anthony, E.J.
- 348-360 Influence of stabilizer jets on combustion characteristics and NOx emission in a jet-stabilized combustor
by Zeinivand, Hamed & Bazdidi-Tehrani, Farzad
- 361-368 A kinetic study of NO formation during oxy-fuel combustion of pyridine
by Wang, B. & Sun, L.S. & Su, S. & Xiang, J. & Hu, S. & Fei, H.
- 369-378 Optimization of global and local pollution control in electricity production from coal burning
by Cristóbal, Jorge & Guillén-Gosálbez, Gonzalo & Jiménez, Laureano & Irabien, Angel
- 379-385 Arthrospira (Spirulina) platensis cultivation in tubular photobioreactor: Use of no-cost CO2 from ethanol fermentation
by Ferreira, L.S. & Rodrigues, M.S. & Converti, A. & Sato, S. & Carvalho, J.C.M.
- 386-394 Effects of operating parameters on nitrogen oxides emissions for a natural gas fueled homogeneous charged compression ignition engine (HCCI): Results from a thermodynamic model with detailed chemistry
by Zheng, Junnian & Caton, Jerald A.
- 395-405 Optimization of geometrical parameters for Stirling engines based on theoretical analysis
by Cheng, Chin-Hsiang & Yang, Hang-Suin
- 406-414 Ionic liquids for biofuel production: Opportunities and challenges
by Liu, Chun-Zhao & Wang, Feng & Stiles, Amanda R. & Guo, Chen
- 415-420 The effect of SO2 on CO2 capture by CaO-based pellets prepared with a kaolin derived Al(OH)3 binder
by Ridha, Firas N. & Manovic, Vasilije & Macchi, Arturo & Anthony, Edward J.
- 421-428 Mild acid pretreatment and enzyme saccharification of Sorghum bicolor straw
by Vancov, T. & McIntosh, S.
- 429-436 Dry cooling with night cool storage to enhance solar power plants performance in extreme conditions areas
by Muñoz, J. & Martínez-Val, J.M. & Abbas, R. & Abánades, A.
- 437-446 Numerical study of a homogeneous charge compression ignition (HCCI) engine fueled with biogas
by Visakhamoorthy, Sona & Tzanetakis, Tommy & Haggith, Dale & Sobiesiak, Andrzej & Wen, John Z.
- 447-455 The transitory and permanent volatility of oil prices: What implications are there for the US industrial production?
by Ali Ahmed, Huson Joher & Bashar, Omar H.M.N. & Wadud, I.K.M. Mokhtarul
- 456-461 Properties of form-stable paraffin/silicon dioxide/expanded graphite phase change composites prepared by sol–gel method
by Li, Min & Wu, Zhishen & Tan, Jinmiao
- 462-472 Effect of thermal mass on life cycle primary energy balances of a concrete- and a wood-frame building
by Dodoo, Ambrose & Gustavsson, Leif & Sathre, Roger
- 473-479 Benefits of biofuels in Sweden: A probabilistic re-assessment of the index of new cars’ climate impact
by Lubbe, Nils & Sahlin, Ullrika
- 480-491 Numerical estimation of time lags and decrement factors for wall complexes including Multilayer Thermal Insulation, in two different climatic zones
by Mavromatidis, Lazaros Elias & EL Mankibi, Mohamed & Michel, Pierre & Santamouris, Mat
- 492-502 Design and optimization of an Atkinson cycle engine with the Artificial Neural Network Method
by Zhao, Jinxing & Xu, Min & Li, Mian & Wang, Bin & Liu, Shuangzhai
- 503-515 Steady-state thermal analysis of an innovative receiver for linear Fresnel reflectors
by Abbas, R. & Muñoz, J. & Martínez-Val, J.M.
- 516-522 Effect of adjacent shading on the thermal performance of residential buildings in a subtropical region
by Chan, A.L.S.
- 523-533 An analysis of heat flow through a borehole heat exchanger validated model
by Florides, Georgios A. & Christodoulides, Paul & Pouloupatis, Panayiotis
- 534-544 Evaluation of the environmental impact of experimental cubicles using Life Cycle Assessment: A highlight on the manufacturing phase
by Menoufi, Karim & Castell, Albert & Navarro, Lídia & Pérez, Gabriel & Boer, Dieter & Cabeza, Luisa F.
- 545-551 Distributional impacts of taxing carbon in China: Results from the CEEPA model
by Liang, Qiao-Mei & Wei, Yi-Ming
- 552-562 Exploring the regional characteristics of inter-provincial CO2 emissions in China: An improved fuzzy clustering analysis based on particle swarm optimization
by Yu, Shiwei & Wei, Yi-Ming & Fan, Jingli & Zhang, Xian & Wang, Ke
- 563-572 Experimental analysis on the dehumidification and thermal performance of a desiccant wheel
by Angrisani, Giovanni & Minichiello, Francesco & Roselli, Carlo & Sasso, Maurizio
- 573-582 Road transport and power system scenarios for Northern Europe in 2030
by Juul, Nina & Meibom, Peter