Contact information of Elsevier
Serial Information
Download restrictions: Full text for ScienceDirect subscribers only
Series handle: RePEc:eee:reensy
ISSN: 0951-8320
Citations RSS feed: at CitEc
Impact factors
Access and download statisticsTop item:
Corrections
All material on this site has been provided by the respective publishers and authors. You can help
correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy. See general information about how to correct material in RePEc.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .
Content
2009, Volume 94, Issue 2
- 332-341 Safety-barrier diagrams as a safety management tool
by Duijm, Nijs Jan
- 342-349 Mathematical formulation and numerical treatment based on transition frequency densities and quadrature methods for non-homogeneous semi-Markov processes
by Moura, Márcio das Chagas & Droguett, Enrique López
- 350-356 Reliability properties of consecutive k-out-of-n systems of arbitrarily dependent components
by Eryılmaz, Serkan
- 357-369 A Petri net-based modelling of replacement strategies under technological obsolescence
by Clavareau, Julien & Labeau, Pierre-Etienne
- 370-381 Maintenance and replacement policies under technological obsolescence
by Clavareau, Julien & Labeau, Pierre-Etienne
- 382-393 Stochastic demand patterns for Markov service facilities with neutral and active periods
by Csenki, Attila
- 394-403 A new approach to MLE of Weibull distribution with interval data
by Tan, Zhibin
- 404-411 Identification of safety and security critical systems and activities
by Aven, Terje
- 412-417 The management of mechanical integrity inspections at small-sized “Seveso†facilities
by Bragatto, Paolo A. & Pittiglio, Paolo & Ansaldi, Silvia
- 418-431 Predictive maintenance policy for a gradually deteriorating system subject to stress
by Deloux, E. & Castanier, B. & Bérenguer, C.
- 432-444 Optimal power system generation scheduling by multi-objective genetic algorithms with preferences
by Zio, E. & Baraldi, P. & Pedroni, N.
- 445-455 On the use of the hybrid causal logic method in offshore risk analysis
by Røed, Willy & Mosleh, Ali & Vinnem, Jan Erik & Aven, Terje
- 456-462 Operational reliability assessment of an aircraft environmental control system
by Jenab, K. & Rashidi, K.
- 463-473 Bayesian estimation of mixed Weibull distributions
by Touw, Anduin E.
- 474-478 The environment, international standards, asset health management and condition monitoring: An integrated strategy
by Roe, S. & Mba, D.
- 479-489 Machine and component residual life estimation through the application of neural networks
by Herzog, M.A. & Marwala, T. & Heyns, P.S.
- 490-496 Impact of quality variations on product reliability
by Jiang, R. & Murthy, D.N.P.
- 497-502 Replacement policy in a system under shocks following a Markovian arrival process
by Montoro-Cazorla, Delia & Pérez-Ocón, Rafael & del Carmen Segovia, Maria
- 503-508 Monitoring reliability for a three-parameter Weibull distribution
by Sürücü, Barış & Sazak, Hakan S.
- 509-519 A nonlinear mixed-effects model for degradation data obtained from in-service inspections
by Yuan, X.-X. & Pandey, M.D.
- 520-525 Architectural constraints in IEC 61508: Do they have the intended effect?
by Lundteigen, Mary Ann & Rausand, Marvin
- 526-533 An inspection model for a process with two types of inspections and repairs
by Wang, Wenbin
- 534-541 Spatial distribution of water supply reliability and critical links of water supply to crucial water consumers under an earthquake
by Wang, Yu & Au, Siu-Kui
- 542-550 A generic method for estimating system reliability using Bayesian networks
by Doguc, Ozge & Ramirez-Marquez, Jose Emmanuel
- 551-557 Classification and calculation of primary failure modes in bread production line
by Tsarouhas, Panagiotis H.
- 558-567 A review of different perspectives on uncertainty and risk and an alternative modeling paradigm
by Samson, Sundeep & Reneke, James A. & Wiecek, Margaret M.
- 568-576 Deterministic network interdiction optimization via an evolutionary approach
by Rocco S, Claudio M. & Ramirez-Marquez, José Emmanuel
- 577-587 Minmax defense strategy for complex multi-state systems
by Hausken, Kjell & Levitin, Gregory
- 588-595 False targets vs. redundancy in homogeneous parallel systems
by Levitin, Gregory & Hausken, Kjell
- 596-603 Parameter uncertainty effects on variance-based sensitivity analysis
by Yu, W. & Harris, T.J.
- 604-610 Bayesian approaches for detecting significant deterioration
by Røed, Willy & Aven, Terje
- 611-617 A repair–replace strategy based on usage rate for items sold with a two-dimensional warranty
by Jack, N. & Iskandar, B.P. & Murthy, D.N.P.
- 618-627 Designing airport checked-baggage-screening strategies considering system capability and reliability
by Feng, Qianmei & Sahin, Hande & Kapur, Kailash C.
- 628-643 Bayesian inference in probabilistic risk assessment—The current state of the art
by Kelly, Dana L. & Smith, Curtis L.
- 644-657 Beyond its cost, the value of maintenance: An analytical framework for capturing its net present value
by Marais, Karen B. & Saleh, Joseph H.
- 658-665 Subset simulation for structural reliability sensitivity analysis
by Song, Shufang & Lu, Zhenzhou & Qiao, Hongwei
- 666-669 Virtual age of non-repairable objects
by Finkelstein, Maxim
- 670-674 Influence of step complexity and presentation style on step performance of computerized emergency operating procedures
by Xu, Song & Li, Zhizhong & Song, Fei & Luo, Wei & Zhao, Qianyi & Salvendy, Gavriel
2009, Volume 94, Issue 1
- 2-21 A survey of the application of gamma processes in maintenance
by van Noortwijk, J.M.
- 22-32 Addressing imperfect maintenance modelling uncertainty in unavailability and cost based optimization
by Sanchez, Ana & Carlos, Sofia & Martorell, Sebastian & Villanueva, Jose F.
- 33-43 Optimal non-periodic inspection for a multivariate degradation model
by Barker, C.T. & Newby, M.J.
- 44-52 Optimization of maintenance policy using the proportional hazard model
by Samrout, M. & Châtelet, E. & Kouta, R. & Chebbo, N.
- 53-62 Modelling and optimizing sequential imperfect preventive maintenance
by Bartholomew-Biggs, Michael & Zuo, Ming J. & Li, Xiaohu
- 63-77 Tele-maintenance “intelligent†system for technical plants result management
by Concetti, Massimo & Cuccioletta, Roberto & Fedele, Lorenzo & Mercuri, Giampiero
- 78-88 A neuro-fuzzy technique for fault diagnosis and its application to rotating machinery
by Zio, Enrico & Gola, Giulio
- 89-96 A summary of maintenance policies for a finite interval
by Nakagawa, T. & Mizutani, S.
- 97-110 Value-driven maintenance planning for a production plant
by Rosqvist, T. & Laakso, K. & Reunanen, M.
- 111-124 Methodology of using delay-time analysis for a manufacturing industry
by Jones, B. & Jenkinson, I. & Wang, J.
2008, Volume 93, Issue 12
- 1781-1787 Critical infrastructures at risk: A need for a new conceptual approach and extended analytical tools
by Kröger, Wolfgang
- 1788-1800 Sensitivity analysis in optimization and reliability problems
by Castillo, Enrique & MÃnguez, Roberto & Castillo, Carmen
- 1801-1808 Modelling and estimating the reliability of stochastic dynamical systems with Markovian switching
by Chiquet, Julien & Eid, Mohamed & Limnios, Nikolaos
- 1809-1813 Homogeneity and scale testing of generalized gamma distribution
by StehlÃk, Milan
- 1814-1820 On the use of on-line detection for maintenance of gradually deteriorating systems
by Fouladirad, Mitra & Grall, Antoine & Dieulle, Laurence
- 1821-1829 Reliability and risk analysis of large systems with ageing components
by Kołowrocki, K. & Kwiatuszewska-Sarnecka, B.
- 1830-1841 Genetic algorithm-based optimization of testing and maintenance under uncertain unavailability and cost estimation: A survey of strategies for harmonizing evolution and accuracy
by Villanueva, J.F. & Sanchez, A.I. & Carlos, S. & Martorell, S.
- 1842-1852 Designing a risk-informed balanced system by genetic algorithms: Comparison of different balancing criteria
by Podofillini, Luca & Zio, Enrico
- 1853-1860 Applications to continuous-time processes of computational techniques for discrete-time renewal processes
by van Noortwijk, J.M. & van der Weide, J.A.M.
- 1861-1866 Birnbaum and criticality measures of component contribution to the failure of phased missions
by Andrews, J.D.
- 1867-1876 Probabilistic assessments in relationship with safety integrity levels by using Fault Trees
by Dutuit, Y. & Innal, F. & Rauzy, A. & Signoret, J.-P.
- 1877-1885 A study on availability and safety of new propulsion systems for LNG carriers
by Chang, Daejun & Rhee, Taejin & Nam, Kiil & Chang, Kwangpil & Lee, Donghun & Jeong, Samheon
- 1886-1895 On the use of non-coherent fault trees in safety and security studies
by Contini, S. & Cojazzi, G.G.M. & Renda, G.
- 1896-1905 Validation of a probabilistic model for hurricane insurance loss projections in Florida
by Pinelli, J.-P. & Gurley, K.R. & Subramanian, C.S. & Hamid, S.S. & Pita, G.L.
- 1906-1910 On the consistency of risk acceptance criteria with normative theories for decision-making
by Abrahamsen, E.B. & Aven, T.
- 1911-1921 The systematic integration of human factors into safety analyses: An integrated engineering approach
by Colombo, S. & Demichela, M.
2008, Volume 93, Issue 11
- 1577-1583 Quantitative analysis of a fault tree with priority AND gates
by Yuge, T. & Yanagi, S.
- 1584-1593 Matrix-based system reliability method and applications to bridge networks
by Kang, Won-Hee & Song, Junho & Gardoni, Paolo
- 1594-1604 Configuration determination for k-out-of-n partially redundant systems
by Lu, Lixuan & Lewis, Gregory
- 1605-1615 Reliability importance analysis of Markovian systems at steady state using perturbation analysis
by Do Van, Phuc & Barros, Anne & Bérenguer, Christophe
- 1616-1627 Construction of event-tree/fault-tree models from a Markov approach to dynamic system reliability
by Bucci, Paolo & Kirschenbaum, Jason & Mangan, L. Anthony & Aldemir, Tunc & Smith, Curtis & Wood, Ted
- 1628-1649 An integrated methodology for the dynamic performance and reliability evaluation of fault-tolerant systems
by DomÃnguez-GarcÃa, Alejandro D. & Kassakian, John G. & Schindall, Joel E. & Zinchuk, Jeffrey J.
- 1650-1657 Modelling a reliability system governed by discrete phase-type distributions
by Ruiz-Castro, Juan Eloy & Pérez-Ocón, Rafael & Fernández-Villodre, Gemma
- 1658-1672 Extended great deluge algorithm for the imperfect preventive maintenance optimization of multi-state systems
by Nahas, Nabil & Khatab, Abdelhakim & Ait-Kadi, Daoud & Nourelfath, Mustapha
- 1673-1681 Optimal design of multi-state weighted k-out-of-n systems based on component design
by Li, Wei & Zuo, Ming J.
- 1682-1688 About time-variant reliability analysis with reference to passive systems assessment
by Burgazzi, Luciano
- 1689-1697 All-terminal network reliability optimization via probabilistic solution discovery
by Ramirez-Marquez, José Emmanuel & Rocco, Claudio M.
- 1698-1709 Port-of-entry safety via the reliability optimization of container inspection strategy through an evolutionary approach
by Ramirez-Marquez, Jose Emmanuel
- 1710-1719 Conceptualizing and communicating organizational risk dynamics in the thoroughness–efficiency space
by Marais, K.B. & Saleh, J.H.
- 1720-1729 Modeling demand rate and imperfect proof-test and analysis of their effect on system safety
by Kumar, Manoj & Verma, A.K. & Srividya, A.
- 1730-1739 Multi-state systems with multi-fault coverage
by Levitin, Gregory & Amari, Suprasad V.
- 1740-1750 Strategic defense and attack for reliability systems
by Hausken, Kjell
- 1751-1760 An analytical framework for reliability growth of one-shot systems
by Hall, J. Brian & Mosleh, Ali
- 1761-1771 Predicting availability functions in time-dependent complex systems with SAEDES simulation algorithms
by Faulin, Javier & Juan, Angel A. & Serrat, Carles & Bargueño, Vicente
- 1772-1773 Comments on “Reliability-centered predictive maintenance scheduling for a continuously monitored system subject to degradation†by X. Zhou, L. Xi and J. Lee [Reliab Eng Syst Saf 2007; 92: 530–534]
by Wu, Shaomin
2008, Volume 93, Issue 10
- 1377-1409 Level-1 probability safety assessment of the Iranian heavy water reactor using SAPHIRE software
by Faghihi, F. & Ramezani, E. & Yousefpour, F. & Mirvakili, S.M.
- 1410-1421 A study of software reliability growth from the perspective of learning effects
by Chiu, Kuei-Chen & Huang, Yeu-Shiang & Lee, Tzai-Zang
- 1422-1433 Formal analysis of empirical traces in incident management
by Hoogendoorn, Mark & Jonker, Catholijn M. & van Maanen, Peter-Paul & Sharpanskykh, Alexei
- 1434-1443 Weibull extension model: A Bayes study using Markov chain Monte Carlo simulation
by Gupta, Ashutosh & Mukherjee, Bhaswati & Upadhyay, S.K.
- 1444-1451 Protection vs. redundancy in homogeneous parallel systems
by Levitin, Gregory & Hausken, Kjell
- 1461-1472 Generalized renewal process for repairable systems based on finite Weibull mixture
by Veber, B. & Nagode, M. & Fajdiga, M.
- 1473-1484 Reliability evaluation of deregulated electric power systems for planning applications
by Ehsani, A. & Ranjbar, A.M. & Jafari, A. & Fotuhi-Firuzabad, M.
- 1485-1490 A discrete stress–strength interference model based on universal generating function
by An, Zong-Wen & Huang, Hong-Zhong & Liu, Yu
- 1491-1499 Reliability study of friction stir welded copper canisters containing Sweden's nuclear waste
by Cederqvist, Lars & Öberg, Tomas
- 1500-1511 An ergonomics study of computerized emergency operating procedures: Presentation style, task complexity, and training level
by Xu, Song & Song, Fei & Li, Zhizhong & Zhao, Qianyi & Luo, Wei & He, Xuhong & Salvendy, Gavriel
- 1512-1522 Reliability analysis of cluster-based ad-hoc networks
by Cook, Jason L. & Ramirez-Marquez, Jose Emmanuel
- 1523-1533 Accidents in the construction industry in the Netherlands: An analysis of accident reports using Storybuilder
by Ale, B.J.M. & Bellamy, L.J. & Baksteen, H. & Damen, M. & Goossens, L.H.J. & Hale, A.R. & Mud, M. & Oh, J. & Papazoglou, I.A. & Whiston, J.Y.
- 1534-1542 Demonstration of statistical approaches to identify component's ageing by operational data analysis—A case study for the ageing PSA network
by Rodionov, Andrei & Atwood, Corwin L. & Kirchsteiger, Christian & Patrik, Milan
- 1543-1550 An enhanced component connection method for conversion of fault trees to binary decision diagrams
by Remenyte-Prescott, R. & Andrews, J.D.
- 1551-1562 Modeling of machine failures in a flexible manufacturing cell with two machines served by a robot
by Savsar, Mehmet & Aldaihani, Majid
- 1563-1573 Uncertainty and sensitivity analysis for models with correlated parameters
by Xu, Chonggang & Gertner, George Zdzislaw
- 1574-1576 Use of the lognormal distribution for the coefficients of friction and wear
by Steele, Clint
2008, Volume 93, Issue 9
- 1292-1304 Causal factors in accidents of high-speed craft and conventional ocean-going vessels
by Antão, Pedro & Guedes Soares, C.
- 1305-1316 On the development of the new harmonised damage stability regulations for dry cargo and passenger ships
by Papanikolaou, Apostolos & Eliopoulou, Eleftheria
- 1317-1327 Effects of Common Structural Rules on hull-girder reliability of an Aframax oil tanker
by Parunov, Joško & Guedes Soares, C.
- 1328-1344 Analysing the risk of LNG carrier operations
by Vanem, Erik & Antão, Pedro & Østvik, Ivan & de Comas, Francisco Del Castillo
- 1345-1353 Reliability assessment of reliquefaction systems on LNG carriers
by Kwang Pil, Chang & Rausand, Marvin & Vatn, Jørn
- 1354-1368 Cost-effectiveness criteria for marine oil spill preventive measures
by Vanem, Erik & Endresen, Øyvind & Skjong, Rolf
- 1369-1376 Risk-based rules for crane safety systems
by Ruud, Stian & Mikkelsen, Ã…ge
2008, Volume 93, Issue 8
- 1091-1104 Review of advances in human reliability analysis of errors of commission, Part 1: EOC identification
by Reer, Bernhard
- 1105-1122 Review of advances in human reliability analysis of errors of commission—Part 2: EOC quantification
by Reer, Bernhard
- 1123-1129 An extended extreme shock maintenance model for a deteriorating system
by Chen, Jinyuan & Li, Zehui
- 1130-1137 Development and application of a Risk Assessment Tool
by Majdara, Aref & Nematollahi, Mohammad Reza
- 1138-1150 A framework to practical predictive maintenance modeling for multi-state systems
by Ming Tan, Cher & Raghavan, Nagarajan
- 1151-1164 Key attributes of the SAPHIRE risk and reliability analysis software for risk-informed probabilistic applications
by Smith, Curtis & Knudsen, James & Kvarfordt, Kellie & Wood, Ted
- 1165-1187 On the concept of e-maintenance: Review and current research
by Muller, Alexandre & Crespo Marquez, Adolfo & Iung, Benoît
- 1188-1196 Non-parametric estimation of the availability in a general repairable system
by Gámiz, M.L. & Román, Y.
- 1197-1207 Computational methods for model reliability assessment
by Rebba, Ramesh & Mahadevan, Sankaran
- 1208-1217 Spurious activation of safety instrumented systems in the oil and gas industry: Basic concepts and formulas
by Lundteigen, Mary Ann & Rausand, Marvin
- 1218-1230 Reliable design space and complete single-loop reliability-based design optimization
by Shan, Songqing & Wang, G. Gary
- 1231-1243 Algorithm for estimating reliability confidence bounds of multi-state systems
by Ramirez-Marquez, Jose Emmanuel & Levitin, Gregory
- 1244-1249 Research of psychological characteristics and performance relativity of operators
by Xiang, Fang & Xuhong, He & Bingquan, Zhao
- 1250-1256 Radiological risk analysis of particle accelerators
by Chowdhury, Lekha M. & Sarkar, P.K.
- 1257-1272 Tabu search for the redundancy allocation problem of homogenous series–parallel multi-state systems
by Ouzineb, Mohamed & Nourelfath, Mustapha & Gendreau, Michel
- 1273-1279 Using simultaneous higher-level and partial lower-level data in reliability assessments
by Graves, T.L. & Hamada, M.S. & Klamann, R.M. & Koehler, A.C. & Martz, H.F.
- 1280-1286 Analytical basis for evaluating the effect of unplanned interventions on the effectiveness of a human–robot system
by Shah, Julie A. & Saleh, Joseph H. & Hoffman, Jeffrey A.
2008, Volume 93, Issue 7
- 922-932 Radyban: A tool for reliability analysis of dynamic fault trees through conversion into dynamic Bayesian networks
by Montani, S. & Portinale, L. & Bobbio, A. & Codetta-Raiteri, D.
- 933-939 Modelling dependable systems using hybrid Bayesian networks
by Neil, Martin & Tailor, Manesh & Marquez, David & Fenton, Norman & Hearty, Peter
- 940-949 Modelling the reliability of search and rescue operations with Bayesian Belief Networks
by Norrington, Lisa & Quigley, John & Russell, Ashley & Van der Meer, Robert
- 950-963 Bayesian networks inference algorithm to implement Dempster Shafer theory in reliability analysis
by Simon, C. & Weber, P. & Evsukoff, A.
- 964-979 Global sensitivity analysis using polynomial chaos expansions
by Sudret, Bruno
- 980-994 Phased mission modelling of systems with maintenance-free operating periods using simulated Petri nets
by Chew, S.P. & Dunnett, S.J. & Andrews, J.D.
- 995-1003 Optimization of cost and downtime for replacement model following the expiration of warranty
by Jung, Ki Mun & Han, Sung Sil & Park, Dong Ho
- 1004-1017 Sensitivity approach for modelling the environmental loading of marine structures through a matrix response surface
by Schoefs, Franck
- 1018-1024 An improved algorithm for searching all minimal cuts in modified networks
by Yeh, Wei-Chang
- 1025-1035 Assessment of redundant systems with imperfect coverage by means of binary decision diagrams
by Myers, Albert F. & Rauzy, Antoine
- 1036-1046 Mission reliability analysis of fault-tolerant multiple-phased systems
by Mo, Yu-chang & Siewiorek, Daniel & Yang, Xiao-zong
- 1047-1059 Extension of Latin hypercube samples with correlated variables
by Sallaberry, C.J. & Helton, J.C. & Hora, S.C.
- 1060-1071 A general first-order global sensitivity analysis method
by Xu, Chonggang & Gertner, George Zdzislaw
- 1072-1090 Safety of dynamic positioning operations on mobile offshore drilling units
by Chen, Haibo & Moan, Torgeir & Verhoeven, Harry
2008, Volume 93, Issue 6
- 779-789 Genetic algorithm optimisation of the maintenance scheduling of generating units in a power system
by Volkanovski, Andrija & Mavko, Borut & Boševski, Tome & Čauševski, Anton & Čepin, Marko
- 790-797 A semi-quantitative approach to risk analysis, as an alternative to QRAs
by Aven, Terje
- 798-805 Principles of engineering safety: Risk and uncertainty reduction
by Möller, Niklas & Hansson, Sven Ove
- 806-814 A framework for intelligent reliability centered maintenance analysis
by Cheng, Zhonghua & Jia, Xisheng & Gao, Ping & Wu, Su & Wang, Jianzhao
- 815-828 Multi-objective optimization of generalized reliability design problems using feature models—A concept for early design stages
by Limbourg, Philipp & Kochs, Hans-Dieter
- 829-837 Automatic creation of Markov models for reliability assessment of safety instrumented systems
by Guo, Haitao & Yang, Xianhui
- 838-844 Evaluation of the reliability of transport networks based on the stochastic flow of moving objects
by Wu, Wei-wei & Ning, Angelika & Ning, Xuan-xi
- 845-856 A Bayesian Belief Network modelling of organisational factors in risk analysis: A case study in maritime transportation
by Trucco, P. & Cagno, E. & Ruggeri, F. & Grande, O.
- 857-873 OpenSESAME—the simple but extensive, structured availability modeling environment
by Walter, Max & Siegle, Markus & Bode, Arndt
- 874-884 Parallel simulation algorithm for maintenance optimization based on directed Acyclic Graph
by Briš, Radim
- 885-896 Strong exploration of a cast iron pipe failure model
by Moglia, M. & Davis, P. & Burn, S.
- 897-912 Spatial generalized linear mixed models of electric power outages due to hurricanes and ice storms
by Liu, Haibin & Davidson, Rachel A. & Apanasovich, Tatiyana V.
- 913-919 Performance modeling in critical engineering systems using RAM analysis
by Sharma, Rajiv Kumar & Kumar, Sunand
2008, Volume 93, Issue 5
- 657-674 TU Delft expert judgment data base
by Cooke, Roger M. & Goossens, Louis L.H.J.
- 675-686 Expert judgement combination using moment methods
by Wisse, Bram & Bedford, Tim & Quigley, John
- 687-698 Informing risk-mitigation priorities using uncertainty measures derived from heterogeneous expert panels: A demonstration using foodborne pathogens
by Hoffmann, Sandra & Fischbeck, Paul & Krupnick, Alan & McWilliams, Michael
- 699-710 Eliciting conditional and unconditional rank correlations from conditional probabilities
by Morales, O. & Kurowicka, D. & Roelen, A.
- 711-721 A study of expert overconfidence
by Lin, Shi-Woei & Bier, Vicki M.
- 722-731 A paired comparison experiment for gathering expert judgment for an aircraft wiring risk assessment
by Mazzuchi, Thomas A. & Linzey, William G. & Bruning, Armin
- 732-744 Uncertainty in mortality response to airborne fine particulate matter: Combining European air pollution experts
by Tuomisto, Jouni T. & Wilson, Andrew & Evans, John S. & Tainio, Marko
- 745-756 On the performance of social network and likelihood-based expert weighting schemes
by Cooke, Roger M. & ElSaadany, Susie & Huang, Xinzheng
2008, Volume 93, Issue 4
- 501-508 Industrial application of RAM modeling
by Herder, P.M. & van Luijk, J.A. & Bruijnooge, J.
- 509-521 Diagnosis based on reliability analysis using monitors and sensors
by Assaf, T. & Dugan, J.B.
- 522-529 Development of lifetime warranty policies and models for estimating costs
by Chattopadhyay, Gopinath & Rahman, Anisur
- 530-549 Workload prediction for improved design and reliability of complex systems
by Gregoriades, Andreas & Sutcliffe, Alistair
- 550-556 Reliability optimization of series-parallel systems with a choice of redundancy strategies using a genetic algorithm
by Tavakkoli-Moghaddam, R. & Safari, J. & Sassani, F.
- 557-566 A study on the validity of a task complexity measure for emergency operating procedures of nuclear power plants—Comparing task complexity scores with two sets of operator response time data obtained under a simulated SGTR
by Park, Jinkyun & Jung, Wondea
- 567-577 An analytical approach to quantitative effect estimation of operation advisory system based on human cognitive process using the Bayesian belief network
by Lee, Seung Jun & Kim, Man Cheol & Seong, Poong Hyun
- 578-587 A new method for estimating human error probabilities: AHP–SLIM
by Park, Kyung S. & Lee, Jae in
- 588-594 Monitoring and maintenance of spares and one shot devices
by Newby, Martin
- 595-603 Dynamic reliability networks with self-healing units
by Jenab, K. & Seyed Hosseini, S.M. & Dhillon, B.S.
- 604-615 System repairs: When to perform and what to do?
by Lugtigheid, Diederik & Banjevic, Dragan & Jardine, Andrew K.S.
- 616-626 A Gamma–normal series truncation approximation for computing the Weibull renewal function
by Jiang, R.
- 627-638 Security risks and probabilistic risk assessment of glazing subject to explosive blast loading
by Stewart, Mark G. & Netherton, Michael D.
- 639-646 Importance of protections against intentional attacks
by Levitin, Gregory & Ben-Haim, Hanoch
- 647-653 Reliability analysis of mining equipment: A case study of a crushing plant at Jajarm Bauxite Mine in Iran
by Barabady, Javad & Kumar, Uday
2008, Volume 93, Issue 3
- 364-372 Probabilistic evaluation of initiation time of chloride-induced corrosion
by Val, Dimitri V. & Trapper, Pavel A.
- 373-382 Pitting corrosion and structural reliability of corroding RC structures: Experimental data and probabilistic analysis
by Stewart, Mark G. & Al-Harthy, Ali
- 383-393 Probabilistic capacity models and seismic fragility estimates for RC columns subject to corrosion
by Choe, Do-Eun & Gardoni, Paolo & Rosowsky, David & Haukaas, Terje
- 394-409 Reinforced concrete bridge deck reliability model incorporating temporal and spatial variations of probabilistic corrosion rate sensor data
by Marsh, Philip S. & Frangopol, Dan M.
- 410-422 Probabilistic models for the extent of damage in degrading reinforced concrete structures
by Sudret, B.
- 423-432 Probabilistic models for steel corrosion loss and pitting of marine infrastructure
by Melchers, R.E. & Jeffrey, R.J.
- 433-446 Reliability-based assessment of deteriorating ship structures operating in multiple sea loading climates
by Moan, Torgeir & Ayala-Uraga, Efren
- 447-455 Influence of grade on the reliability of corroding pipelines
by Maes, M.A. & Dann, M. & Salama, M.M.
- 456-467 Multiaxial fatigue reliability analysis of railroad wheels
by Liu, Yongming & Liu, Liming & Stratman, Brant & Mahadevan, Sankaran
- 468-475 A reliability model for assessing the risk of termite attack on housing in Australia
by Leicester, Robert H. & Wang, Chi-Hsiang & Cookson, Laurie J.
- 476-481 Probabilistic procedure for design of untreated timber poles in-ground under attack of decay fungi
by Wang, Chi-hsiang & Leicester, Robert H. & Nguyen, Minh
- 482-488 Probabilistic procedure for design of untreated timber piles under marine borer attack
by Nguyen, Minh N. & Leicester, Robert H. & Wang, Chi-Hsiang & Cookson, Laurie J.
- 489-499 Cost–benefit optimization for maintained structures by a renewal model
by Joanni, A. & Rackwitz, R.
2008, Volume 93, Issue 2
- 179-196 The Safe-SADT method for aiding designers to choose and improve dependable architectures for complex automated systems
by Benard, Vincent & Cauffriez, Laurent & Renaux, Dominique
- 197-205 Risk informed decision-making and its ethical basis
by Ersdal, Gerhard & Aven, Terje
- 206-216 Criteria for evaluating protection from single points of failure for partially expanded fault trees
by Aswani, D. & Badreddine, B. & Malone, M. & Gauthier, G. & Proietty, J.
- 217-233 Human error data collection as a precursor to the development of a human reliability assessment capability in air traffic management
by Kirwan, Barry & Gibson, W. Huw & Hickling, Brian
- 234-253 Formalisation of a new prognosis model for supporting proactive maintenance implementation on industrial system
by Muller, Alexandre & Suhner, Marie-Christine & Iung, Benoît
- 254-270 Experimental study on the effects of visualized functionally abstracted information on process control tasks
by Ham, Dong-Han & Yoon, Wan Chul & Han, Byoung-Tae
- 271-276 Reliability analysis of shuffle-exchange network systems
by Gunawan, Indra
- 277-287 A method for analysing the reliability of a transmission grid
by Haarla, Liisa & Pulkkinen, Urho & Koskinen, Mikko & Jyrinsalo, Jussi
- 288-297 Multi-scale reliability analysis and updating of complex systems by use of linear programming
by Der Kiureghian, Armen & Song, Junho
- 298-306 A simplified CREAM prospective quantification process and its application
by He, Xuhong & Wang, Yao & Shen, Zupei & Huang, Xiangrui
- 307-315 Aggregation of safety performance indicators to higher-level indicators
by Saqib, Najmus & Tahir Siddiqi, Muhammad
Printed from https://ideas.repec.org/s/eee/reensy30.html
