Contact information of Elsevier
Serial Information
Download restrictions: Full text for ScienceDirect subscribers only
Series handle: RePEc:eee:reensy
ISSN: 0951-8320
Citations RSS feed: at CitEc
Impact factors
Access and download statisticsTop item:
Corrections
All material on this site has been provided by the respective publishers and authors. You can help
correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy. See general information about how to correct material in RePEc.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .
Content
2010, Volume 95, Issue 3
- 278-294 Development of a code-agnostic computational infrastructure for the dynamic generation of accident progression event trees
by Catalyurek, Umit & Rutt, Benjamin & Metzroth, Kyle & Hakobyan, Aram & Aldemir, Tunc & Denning, Richard & Dunagan, Sean & Kunsman, David
- 295-300 Single versus mixture Weibull distributions for nonparametric satellite reliability
by Castet, Jean-Francois & Saleh, Joseph H.
- 301-309 Self-validated variance-based methods for sensitivity analysis of model outputs
by Tong, Charles
2010, Volume 95, Issue 2
- 65-69 Performance evaluation of multi-state degraded systems with minimal repairs and imperfect preventive maintenance
by Soro, Isaac W. & Nourelfath, Mustapha & Aït-Kadi, Daoud
- 70-76 Bayes geometric scaling model for common cause failure rates
by Zitrou, Athena & Bedford, Tim & Walls, Lesley
- 77-86 Methodology for the use of experimental data to enhance model output uncertainty assessment in thermal hydraulics codes
by Pourgol-Mohamad, Mohammad & Mosleh, Ali & Modarres, Mohammad
- 87-98 Development and evaluation of a computer-aided system for analyzing human error in railway operations
by Kim, Dong San & Baek, Dong Hyun & Yoon, Wan Chul
- 99-107 Ideas and developments in importance measures and fault-tree techniques for reliability and risk analysis
by Vaurio, Jussi K.
- 108-119 Impact of few failure data on the opportunistic replacement policy for multi-component systems
by Laggoune, Radouane & Chateauneuf, Alaa & Aissani, Djamil
- 120-126 Some improvements on adaptive genetic algorithms for reliability-related applications
by Ye, Zhisheng & Li, Zhizhong & Xie, Min
- 127-133 On the use of uncertainty importance measures in reliability and risk analysis
by Aven, T. & Nøkland, T.E.
- 134-142 Regression analysis of the structure function for reliability evaluation of continuous-state system
by Gámiz, M.L. & MartÃnez Miranda, M.D.
- 143-148 On incentives for assurance of petroleum supply
by Osmundsen, Petter & Aven, Terje & Tomasgard, Asgeir
- 149-159 Quantitative accelerated degradation testing: Practical approaches
by Mohammadian, S. Hossein & Aït-Kadi, Daoud & Routhier, François
2010, Volume 95, Issue 1
- 1-9 A game-theoretical approach for reciprocal security-related prevention investment decisions
by Reniers, Genserik & Soudan, Karel
- 10-17 Fault-tolerant automobile steering based on diversity of steer-by-wire, braking and acceleration
by Hayama, Ryouhei & Higashi, Masayasu & Kawahara, Sadahiro & Nakano, Shirou & Kumamoto, Hiromitsu
- 18-28 Cell broadcast trials in The Netherlands: Using mobile phone technology for citizens’ alarming
by Jagtman, H.M.
- 29-42 Defense and attack of complex and dependent systems
by Hausken, Kjell
- 43-48 Comparing risk of failure models in water supply networks using ROC curves
by Debón, A. & Carrión, A. & Cabrera, E. & Solano, H.
- 49-57 A data-driven fuzzy approach for predicting the remaining useful life in dynamic failure scenarios of a nuclear system
by Zio, Enrico & Di Maio, Francesco
- 58-63 An approach to maintenance optimization where safety issues are important
by Vatn, Jørn & Aven, Terje
2009, Volume 94, Issue 12
- 1881-1886 Improving the quality of manually acquired data: Applying the theory of planned behaviour to data quality
by Murphy, Glen D.
- 1887-1893 Reliability estimates for flawed mortar projectile bodies
by Cordes, J.A. & Thomas, J. & Wong, R.S. & Carlucci, D.
- 1894-1903 Integrating RAMS engineering and management with the safety life cycle of IEC 61508
by Lundteigen, Mary Ann & Rausand, Marvin & Utne, Ingrid Bouwer
- 1904-1916 On the value of redundancy subject to common-cause failures: Toward the resolution of an on-going debate
by Hoepfer, V.M. & Saleh, J.H. & Marais, K.B.
- 1917-1926 Adjoint operator approach to functional reliability analysis of passive fluid dynamical systems
by Arul, A. John & Iyer, N. Kannan & Velusamy, K.
- 1927-1941 Intelligence and impact contests in systems with redundancy, false targets, and partial protection
by Levitin, Gregory & Hausken, Kjell
- 1942-1953 Time-dependent reliability analysis of flood defences
by Buijs, F.A. & Hall, J.W. & Sayers, P.B. & Van Gelder, P.H.A.J.M.
- 1954-1961 The role of social cost–benefit analysis in societal decision-making under large uncertainties with application to robbery at a cash depot
by Jones-Lee, M. & Aven, T.
- 1962-1974 Bayesian updating of reliability of civil infrastructure facilities based on condition-state data and fault-tree model
by Ching, Jianye & Leu, Sou-Sen
2009, Volume 94, Issue 11
- 1695-1702 An exercise in model validation: Comparing univariate statistics and Monte Carlo-based multivariate statistics
by Weathers, J.B. & Luck, R. & Weathers, J.W.
- 1703-1710 An efficient heuristic versus a robust hybrid meta-heuristic for general framework of serial–parallel redundancy problem
by Sadjadi, Seyed Jafar & Soltani, R.
- 1711-1717 Meeting a demand vs. enhancing protections in homogeneous parallel systems
by Levitin, Gregory & Hausken, Kjell
- 1718-1728 Satellite and satellite subsystems reliability: Statistical data analysis and modeling
by Castet, Jean-Francois & Saleh, Joseph H.
- 1729-1734 Optimising risk reduction: An expected utility approach for marginal risk reduction during regulatory decision making
by Li, Jiawei & Pollard, Simon & Kendall, Graham & Soane, Emma & Davies, Gareth
- 1735-1763 Implementation and evaluation of nonparametric regression procedures for sensitivity analysis of computationally demanding models
by Storlie, Curtis B. & Swiler, Laura P. & Helton, Jon C. & Sallaberry, Cedric J.
- 1764-1781 Functional failure analysis of a thermal–hydraulic passive system by means of Line Sampling
by Zio, E. & Pedroni, N.
- 1782-1787 A geometric process repair model for a repairable cold standby system with priority in use and repair
by Zhang, Yuan Lin & Wang, Guan Jun
- 1788-1795 Redundancy analysis for repairable multi-state system by using combined stochastic processes methods and universal generating function technique
by Lisnianski, Anatoly & Ding, Yi
- 1796-1805 A computational model for evaluating the effects of attention, memory, and mental models on situation assessment of nuclear power plant operators
by Lee, Hyun-Chul & Seong, Poong-Hyun
- 1806-1817 Structural maintenance planning based on historical data of corroded deck plates of tankers
by Garbatov, Y. & Guedes Soares, C.
- 1818-1826 Human factors, human reliability and risk assessment in license renewal of a nuclear power plant
by Vaurio, Jussi K.
- 1827-1837 A min cut-set-wise truncation procedure for importance measures computation in probabilistic safety assessment
by Duflot, Nicolas & Bérenguer, Christophe & Dieulle, Laurence & Vasseur, Dominique
- 1838-1847 A Bayesian approach to modeling and predicting pitting flaws in steam generator tubes
by Yuan, X.-X. & Mao, D. & Pandey, M.D.
- 1848-1861 Reliability analysis of discrete event dynamic systems with Petri nets
by Sadou, Nabil & Demmou, Hamid
- 1862-1868 Reliability and validity of risk analysis
by Aven, Terje & Heide, Bjørnar
- 1869-1877 An efficient process to reduce infrastructure vulnerabilities facing malevolence
by Piwowar, Julien & Châtelet, Eric & Laclémence, Patrick
- 1878-1880 A note on “A simple approach to search for all d-MCs of a limited-flow networkâ€
by Salehi Fathabadi, H. & Forghani-elahabadi, M.
2009, Volume 94, Issue 10
- 1499-1509 Inference in hybrid Bayesian networks
by Langseth, Helge & Nielsen, Thomas D. & RumÃ, Rafael & Salmerón, Antonio
- 1510-1516 An integrated reliability-based design optimization of offshore towers
by Karadeniz, Halil & ToÄŸan, Vedat & Vrouwenvelder, Ton
- 1517-1525 An exact algorithm for preventive maintenance planning of series–parallel systems
by Galante, Giacomo & Passannanti, Gianfranco
- 1526-1541 Taguchi's approach for reliability and safety assessments in the stage separation process of a multistage launch vehicle
by Singaravelu, J. & Jeyakumar, D. & Nageswara Rao, B.
- 1542-1546 Input-profile-based software failure probability quantification for safety signal generation systems
by Kang, Hyun Gook & Lim, Ho Gon & Lee, Ho Jung & Kim, Man Cheol & Jang, Seung Cheol
- 1547-1556 Applying MORT to the analysis of the “Tláhuac†incident
by Santos-Reyes, Jaime & Olmos-Peña, Samuel & Alvarado-Corona, Rafael & Hernández-Simón, Luis
- 1557-1567 A human–machine interface evaluation method: A difficulty evaluation method in information searching (DEMIS)
by Ha, Jun Su & Seong, Poong Hyun
- 1568-1576 A joint reliability–redundancy optimization approach for multi-state series–parallel systems
by Tian, Zhigang & Levitin, Gregory & Zuo, Ming J.
- 1577-1584 Risk assessment and early warning systems for industrial facilities in seismic zones
by Salzano, Ernesto & Garcia Agreda, Anita & Di Carluccio, Antonio & Fabbrocino, Giovanni
- 1585-1592 A two-stage approach for multi-objective decision making with applications to system reliability optimization
by Li, Zhaojun & Liao, Haitao & Coit, David W.
- 1593-1600 Investment in new product reliability
by Murthy, D.N.P. & Rausand, M. & Virtanen, S.
- 1601-1608 Product variety and reliability
by Murthy, D.N.P. & Hagmark, P.-E. & Virtanen, S.
- 1609-1617 Component reliability specification
by Murthy, D.N.P. & Østerås, T. & Rausand, M.
- 1618-1628 A practical procedure for the selection of time-to-failure models based on the assessment of trends in maintenance data
by Louit, D.M. & Pascual, R. & Jardine, A.K.S.
- 1629-1638 Simulation based analysis and an application to an offshore oil and gas production system of the Natvig measures of component importance in repairable systems
by Natvig, Bent & Eide, Kristina A. & Gåsemyr, Jørund & Huseby, Arne B. & Isaksen, Stefan L.
- 1639-1649 Framework for implementation of maintenance management in distribution network service providers
by Gómez Fernández, Juan Francisco & Crespo Márquez, Adolfo
- 1650-1657 Development of a new quantification method for a fire PSA
by Jung, Woo Sik & Lee, Yoon-Hwan & Yang, Joon-Eon
- 1658-1665 Assessment of impact distances for particulate matter dispersion: A stochastic approach
by Godoy, S.M. & Mores, P.L. & Santa Cruz, A.S.M. & Scenna, N.J.
- 1666-1675 Fault tree conditioning methods to trace system configuration changes for the application to low-power/shutdown PSA
by Lim, Ho-Gon & Park, Jin-Hee & Han, Sang-Hoon & Jang, Seong-Cheol
- 1676-1684 Optimal protection of general source–sink networks via evolutionary techniques
by Ramirez-Marquez, Jose E. & Rocco S, Claudio M. & Levitin, Gregory
- 1685-1693 Resiliency as a component importance measure in network reliability
by Whitson, John C. & Ramirez-Marquez, Jose Emmanuel
2009, Volume 94, Issue 9
- 1371-1380 Fault diagnostics of dynamic system operation using a fault tree based method
by Hurdle, E.E. & Bartlett, L.M. & Andrews, J.D.
- 1381-1393 Reliability and availability analysis of dependent–dynamic systems with DRBDs
by Distefano, Salvatore & Puliafito, Antonio
- 1394-1402 Integrating cyber attacks within fault trees
by Nai Fovino, Igor & Masera, Marcelo & De Cian, Alessio
- 1403-1415 Hierarchical, model-based risk management of critical infrastructures
by Baiardi, F. & Telmon, C. & Sgandurra, D.
- 1416-1421 Analyzing maintenance strategies by agent-based simulations: A feasibility study
by Kaegi, M. & Mock, R. & Kröger, W.
- 1422-1432 A new modeling approach to the safety evaluation of N-modular redundant computer systems in presence of imperfect maintenance
by Flammini, Francesco & Marrone, Stefano & Mazzocca, Nicola & Vittorini, Valeria
- 1433-1441 Further development of a Causal model for Air Transport Safety (CATS): Building the mathematical heart
by Ale, B.J.M. & Bellamy, L.J. & van der Boom, R. & Cooper, J. & Cooke, R.M. & Goossens, L.H.J. & Hale, A.R. & Kurowicka, D. & Morales, O. & Roelen, A.L.C. & Spouge, J.
- 1442-1450 Development of a framework for the risk assessment of Na-Tech accidental events
by Antonioni, Giacomo & Bonvicini, Sarah & Spadoni, Gigliola & Cozzani, Valerio
- 1451-1460 An approach for assessing CCP effectiveness in food production applications by predictive QRA modelling
by Doménech, E. & Escriche, I. & Martorell, S.
- 1461-1470 Quantitative hazard and risk analysis for fragments of high-explosive shells in air
by Häring, I. & Schönherr, M. & Richter, C.
- 1471-1479 Public safety investigations—A new evolutionary step in safety enhancement?
by Stoop, John & Roed-Larsen, Sverre
- 1480-1490 Sampling inspection for the evaluation of time-dependent reliability of deteriorating systems under imperfect defect detection
by Kuniewski, Sebastian P. & van der Weide, Johannes A.M. & van Noortwijk, Jan M.
- 1491-1498 Use of decision criteria based on expected values to support decision-making in a production assurance and safety setting
by Aven, T. & Flage, R.
2009, Volume 94, Issue 8
- 1245-1250 An accurate approximate solution of optimal sequential age replacement policy for a finite-time horizon
by Jiang, R.
- 1251-1258 A durability model incorporating safe life methodology and damage tolerance approach to assess first inspection and maintenance period for structures
by Xiong, J.J. & Shenoi, R.A.
- 1259-1273 Risk classification and uncertainty propagation for virtual water distribution systems
by Torres, Jacob M. & Brumbelow, Kelly & Guikema, Seth D.
- 1274-1281 Extension of the RBD-FAST method to the computation of global sensitivity indices
by Mara, Thierry Alex
- 1282-1288 An exact method for solving logical loops in reliability analysis
by Matsuoka, Takeshi
- 1289-1298 Design of fault simulator
by Gabbar, Hossam A. & Sayed, Hanaa E. & Osunleke, Ajiboye S. & Masanobu, Hara
- 1299-1307 A competing risk model for the reliability of cylinder liners in marine Diesel engines
by Bocchetti, D. & Giorgio, M. & Guida, M. & Pulcini, G.
- 1308-1313 Business-oriented prioritization: A novel graphical technique
by Pascual, R. & Del Castillo, G. & Louit, D. & Knights, P.
- 1314-1321 Balancing burn-in and mission times in environments with catastrophic and repairable failures
by Bebbington, Mark & Lai, Chin-Diew & Zitikis, RiÄ ardas
- 1322-1330 M out of n inspected systems subject to shocks in random environment
by Kenzin, Moshe & Frostig, Esther
- 1331-1339 Symptom-based reliability and generalized repairing cost in monitored bridges
by Ceravolo, R. & Pescatore, M. & De Stefano, A.
- 1340-1348 Corrosion cracking prediction updating of deteriorating RC structures using inspection information
by Suo, Qinghui & Stewart, Mark G.
- 1349-1357 Analysis of the marine traffic safety in the Gulf of Finland
by Kujala, P. & Hänninen, M. & Arola, T. & Ylitalo, J.
- 1358-1362 On systems with shared resources and optimal switching strategies
by Finkelstein, Maxim
- 1363-1367 A short Boolean derivation of mean failure frequency for any (also non-coherent) system
by Schneeweiss, Winfrid G.
2009, Volume 94, Issue 7
- 1135-1148 Monte Carlo evaluation of derivative-based global sensitivity measures
by Kucherenko, S. & Rodriguez-Fernandez, M. & Pantelides, C. & Shah, N.
- 1149-1155 Screening important inputs in models with strong interaction properties
by Saltelli, Andrea & Campolongo, Francesca & Cariboni, Jessica
- 1156-1160 Simplex-based screening designs for estimating metamodels
by Pujol, Gilles
- 1161-1172 Polynomial chaos expansion for sensitivity analysis
by Crestaux, Thierry & Le Maıˆtre, Olivier & Martinez, Jean-Marc
- 1173-1182 An adaptive design and interpolation technique for extracting highly nonlinear response surfaces from deterministic models
by Shahsavani, D. & Grimvall, A.
- 1183-1193 Hierarchical adaptive experimental design for Gaussian process emulators
by Busby, Daniel
- 1194-1204 Global sensitivity analysis of computer models with functional inputs
by Iooss, Bertrand & Ribatet, Mathieu
- 1205-1211 A new computational method of a moment-independent uncertainty importance measure
by Liu, Qiao & Homma, Toshimitsu
- 1212-1219 Calculating first-order sensitivity measures: A benchmark of some recent methodologies
by Gatelli, D. & Kucherenko, S. & Ratto, M. & Tarantola, S.
- 1220-1228 Uncertainty assessment of the road safety index
by Hermans, Elke & Van den Bossche, Filip & Wets, Geert
- 1229-1237 Sensitivity analysis for decision-making using the MORE method—A Pareto approach
by Ravalico, Jakin K. & Maier, Holger R. & Dandy, Graeme C.
- 1238-1244 Local parametric sensitivity for mixture models of lifetime distributions
by Rufo, M.J. & Pérez, C.J. & MartÃn, J.
2009, Volume 94, Issue 6
- 1021-1029 Application of generalised linear model for time-dependent trend assessment—A case study for the ageing PSA network
by Antonov, Alexander & Chepurko, Valeriy & Polyakov, Alexander & Rodionov, Andrei
- 1030-1040 A model-based framework for the analysis of team communication in nuclear power plants
by Chung, Yun Hyung & Yoon, Wan Chul & Min, Daihwan
- 1041-1049 Contribution to the sample mean plot for graphical and numerical sensitivity analysis
by Bolado-Lavin, R. & Castaings, W. & Tarantola, S.
- 1050-1056 On the nature and practical handling of the Bayesian aggregation anomaly
by Guarro, Sergio & Yau, Michael
- 1057-1063 Reliability analysis for wind turbines with incomplete failure data collected from after the date of initial installation
by Guo, Haitao & Watson, Simon & Tavner, Peter & Xiang, Jiangping
- 1064-1075 Reliability assessment of passive isolation condenser system of AHWR using APSRA methodology
by Nayak, A.K. & Jain, Vikas & Gartia, M.R. & Prasad, Hari & Anthony, A. & Bhatia, S.K. & Sinha, R.K.
- 1076-1086 Component-based modeling of systems for automated fault tree generation
by Majdara, Aref & Wakabayashi, Toshio
- 1087-1094 Assessment of information impacts in power system security against malicious attacks in a general framework
by Bompard, E. & Napoli, R. & Xue, F.
- 1095-1106 An automated system for batch hazard and operability studies
by Palmer, C. & Chung, P.W.H.
- 1107-1115 Integrated system fault diagnostics utilising digraph and fault tree-based approaches
by Bartlett, L.M. & Hurdle, E.E. & Kelly, E.M.
- 1116-1127 Application of the fault tree analysis for assessment of power system reliability
by Volkanovski, Andrija & ÄŒepin, Marko & Mavko, Borut
- 1128-1132 Testing statistical significance of trends in learning, ageing and safety indicators
by Viertävä, Janne & Vaurio, Jussi K.
2009, Volume 94, Issue 5
- 905-912 A multi-criteria decision model to determine inspection intervals of condition monitoring based on delay time analysis
by Ferreira, Rodrigo J.P. & de Almeida, Adiel Teixeira & Cavalcante, Cristiano A.V.
- 913-921 Stochastic network interdiction optimization via capacitated network reliability modeling and probabilistic solution discovery
by Ramirez-Marquez, José Emmanuel & Rocco S., Claudio M.
- 922-926 Analyzing the effect of introducing a kurtosis parameter in Gaussian Bayesian networks
by Main, P. & Navarro, H.
- 927-931 Tracing the unreliability and recognizing the major unreliability contribution of network components
by Xie, Kaigui & Billinton, Roy
- 932-941 A probabilistic-based airframe integrity management model
by Wang, X. & Rabiei, M. & Hurtado, J. & Modarres, M. & Hoffman, P.
- 942-953 Verification of a primary-to-secondary leaking safety procedure in a nuclear power plant using coloured Petri nets
by Németh, E. & Bartha, T. & Fazekas, Cs. & Hangos, K.M.
- 954-963 The role of network theory and object-oriented modeling within a framework for the vulnerability analysis of critical infrastructures
by Eusgeld, Irene & Kröger, Wolfgang & Sansavini, Giovanni & Schläpfer, Markus & Zio, Enrico
- 964-968 On the distribution type of uncertain inputs for probabilistic assessment
by Ju, Shin-Jon
- 969-972 A study on importance measures and a quantification algorithm in a fire PRA model
by Kim, Kilyoo & Han, Sanghoon
- 973-981 Protection vs. false targets in series systems
by Hausken, Kjell & Levitin, Gregory
- 982-989 A virtual age model based on a bathtub shaped initial intensity
by Dijoux, Yann
- 990-999 The binomial failure rate common-cause model with WinBUGS
by Atwood, Corwin L. & Kelly, Dana L.
- 1000-1018 Incorporating organizational factors into Probabilistic Risk Assessment (PRA) of complex socio-technical systems: A hybrid technique formalization
by Mohaghegh, Zahra & Kazemi, Reza & Mosleh, Ali
2009, Volume 94, Issue 4
- 785-795 Risk-based investment trade-off related to building facility management
by Taillandier, F. & Sauce, G. & Bonetto, R.
- 796-809 Bayesian structural equation modeling method for hierarchical model validation
by Jiang, Xiaomo & Mahadevan, Sankaran
- 810-818 A strategy for the risk-based inspection of pressure safety valves
by Chien, Chi-Hui & Chen, Chun-Hung & Chao, Yuh J.
- 819-829 Assessing uncertainty in extreme events: Applications to risk-based decision making in interdependent infrastructure sectors
by Barker, Kash & Haimes, Yacov Y.
- 830-837 An efficient particle swarm approach for mixed-integer programming in reliability–redundancy optimization applications
by Coelho, Leandro dos Santos
- 838-854 Modelling and optimization of proof testing policies for safety instrumented systems
by Torres-EcheverrÃa, A.C. & Martorell, S. & Thompson, H.A.
- 855-860 Natural disaster risk analysis for critical infrastructure systems: An approach based on statistical learning theory
by Guikema, Seth D.
- 861-871 An integrated structural framework to cost-based FMECA: The priority-cost FMECA
by Carmignani, Gionata
- 872-883 Dynamic fault tree analysis using Monte Carlo simulation in probabilistic safety assessment
by Durga Rao, K. & Gopika, V. & Sanyasi Rao, V.V.S. & Kushwaha, H.S. & Verma, A.K. & Srividya, A.
- 884-890 On treatment of uncertainty in system planning
by Flage, R. & Aven, T.
- 891-904 Multi-objective hierarchical genetic algorithms for multilevel redundancy allocation optimization
by Kumar, Ranjan & Izui, Kazuhiro & Yoshimura, Masataka & Nishiwaki, Shinji
2009, Volume 94, Issue 3
- 677-698 Conceptual basis for the definition and calculation of expected dose in performance assessments for the proposed high-level radioactive waste repository at Yucca Mountain, Nevada
by Helton, Jon C. & Sallaberry, Cedric J.
- 699-721 Computational implementation of sampling-based approaches to the calculation of expected dose in performance assessments for the proposed high-level radioactive waste repository at Yucca Mountain, Nevada
by Helton, Jon C. & Sallaberry, Cedric J.
- 722-731 Simulation-based seismic loss estimation of seaport transportation system
by Na, Ung Jin & Shinozuka, Masanobu
- 732-741 An economically designed, integrated quality and maintenance model using an adaptive Shewhart chart
by Panagiotidou, Sofia & Nenes, George
- 742-751 Calculations of Sobol indices for the Gaussian process metamodel
by Marrel, Amandine & Iooss, Bertrand & Laurent, Béatrice & Roustant, Olivier
- 752-758 Model-based Monte Carlo state estimation for condition-based component replacement
by Cadini, F. & Zio, E. & Avram, D.
- 759-762 Diagnostic system for identification of accident scenarios in nuclear power plants using artificial neural networks
by Santosh, T.V. & Srivastava, A. & Sanyasi Rao, V.V.S. & Ghosh, A.K. & Kushwaha, H.S.
- 763-772 Parallel systems under two sequential attacks
by Levitin, Gregory & Hausken, Kjell
- 773-775 Bayesian framework for prediction of future number of failures from a single group of units in the field
by Ebrahimi, Nader
2009, Volume 94, Issue 2
- 125-141 Reliability engineering: Old problems and new challenges
by Zio, E.
- 142-151 Availability of K-out-of-N:G systems with non-identical components subject to repair priorities
by Khatab, A. & Nahas, N. & Nourelfath, M.
- 152-161 Probabilistic design of aluminum sheet drawing for reduced risk of wrinkling and fracture
by Zhang, Wenfeng & Shivpuri, Rajiv
- 162-179 Design optimization of a safety-instrumented system based on RAMS+C addressing IEC 61508 requirements and diverse redundancy
by Torres-EcheverrÃa, A.C. & Martorell, S. & Thompson, H.A.
- 180-186 Monte Carlo simulation for model-based fault diagnosis in dynamic systems
by Marseguerra, Marzio & Zio, Enrico
- 187-198 Multi-attribute risk assessment for risk ranking of natural gas pipelines
by Brito, A.J. & de Almeida, A.T.
- 199-210 Estimating the spatial distribution of power outages during hurricanes in the Gulf coast region
by Han, Seung-Ryong & Guikema, Seth D. & Quiring, Steven M. & Lee, Kyung-Ho & Rosowsky, David & Davidson, Rachel A.
- 211-217 Advanced nuclear power plant regulation using risk-informed and performance-based methods
by Modarres, Mohammad
- 218-228 Optimal design of cluster-based ad-hoc networks using probabilistic solution discovery
by Cook, Jason L. & Ramirez-Marquez, Jose Emmanuel
- 229-236 Reliability equivalence factors of a general series–parallel system
by Sarhan, Ammar M.
- 237-243 Non-parametric estimation of conditional moments for sensitivity analysis
by Ratto, M. & Pagano, A. & Young, P.C.
- 244-253 Vibration analysis diagnostics by continuous-time models: A case study
by Pedregal, Diego J. & Carmen Carnero, Ma.
- 254-260 Optimal load distribution in series–parallel systems
by Levitin, Gregory & Amari, Suprasad V.
- 261-267 A delay-time model with safety constraint
by Aven, Terje & Castro, I.T.
- 268-281 Building confidence in the reliability assessment of thermal-hydraulic passive systems
by Zio, E. & Pedroni, N.
- 282-293 Statistical models for the analysis of water distribution system pipe break data
by Yamijala, Shridhar & Guikema, Seth D. & Brumbelow, Kelly
- 294-310 Effect of delayed link failure on probability of loss of assured safety in temperature-dependent systems with multiple weak and strong links
by Helton, J.C. & Johnson, J.D. & Oberkampf, W.L.
- 311-319 Resilience and brittleness in the offshore helicopter transportation system: The identification of constraints and sacrifice decisions in pilots’ work
by Gomes, Jose O. & Woods, David D. & Carvalho, Paulo V.R. & Huber, Gilbert J. & Borges, Marcos R.S.
- 320-331 SMV model-based safety analysis of software requirements
by Koh, Kwang Yong & Seong, Poong Hyun
- 332-341 Safety-barrier diagrams as a safety management tool
by Duijm, Nijs Jan
- 342-349 Mathematical formulation and numerical treatment based on transition frequency densities and quadrature methods for non-homogeneous semi-Markov processes
by Moura, Márcio das Chagas & Droguett, Enrique López
- 350-356 Reliability properties of consecutive k-out-of-n systems of arbitrarily dependent components
by Eryılmaz, Serkan
- 357-369 A Petri net-based modelling of replacement strategies under technological obsolescence
by Clavareau, Julien & Labeau, Pierre-Etienne
- 370-381 Maintenance and replacement policies under technological obsolescence
by Clavareau, Julien & Labeau, Pierre-Etienne
- 382-393 Stochastic demand patterns for Markov service facilities with neutral and active periods
by Csenki, Attila
- 394-403 A new approach to MLE of Weibull distribution with interval data
by Tan, Zhibin
- 404-411 Identification of safety and security critical systems and activities
by Aven, Terje
- 412-417 The management of mechanical integrity inspections at small-sized “Seveso†facilities
by Bragatto, Paolo A. & Pittiglio, Paolo & Ansaldi, Silvia
- 418-431 Predictive maintenance policy for a gradually deteriorating system subject to stress
by Deloux, E. & Castanier, B. & Bérenguer, C.
- 432-444 Optimal power system generation scheduling by multi-objective genetic algorithms with preferences
by Zio, E. & Baraldi, P. & Pedroni, N.
- 445-455 On the use of the hybrid causal logic method in offshore risk analysis
by Røed, Willy & Mosleh, Ali & Vinnem, Jan Erik & Aven, Terje
- 456-462 Operational reliability assessment of an aircraft environmental control system
by Jenab, K. & Rashidi, K.
- 463-473 Bayesian estimation of mixed Weibull distributions
by Touw, Anduin E.
- 474-478 The environment, international standards, asset health management and condition monitoring: An integrated strategy
by Roe, S. & Mba, D.
- 479-489 Machine and component residual life estimation through the application of neural networks
by Herzog, M.A. & Marwala, T. & Heyns, P.S.
- 490-496 Impact of quality variations on product reliability
by Jiang, R. & Murthy, D.N.P.
- 497-502 Replacement policy in a system under shocks following a Markovian arrival process
by Montoro-Cazorla, Delia & Pérez-Ocón, Rafael & del Carmen Segovia, Maria
- 503-508 Monitoring reliability for a three-parameter Weibull distribution
by Sürücü, Barış & Sazak, Hakan S.
- 509-519 A nonlinear mixed-effects model for degradation data obtained from in-service inspections
by Yuan, X.-X. & Pandey, M.D.
- 520-525 Architectural constraints in IEC 61508: Do they have the intended effect?
by Lundteigen, Mary Ann & Rausand, Marvin
- 526-533 An inspection model for a process with two types of inspections and repairs
by Wang, Wenbin
- 534-541 Spatial distribution of water supply reliability and critical links of water supply to crucial water consumers under an earthquake
by Wang, Yu & Au, Siu-Kui
- 542-550 A generic method for estimating system reliability using Bayesian networks
by Doguc, Ozge & Ramirez-Marquez, Jose Emmanuel
- 551-557 Classification and calculation of primary failure modes in bread production line
by Tsarouhas, Panagiotis H.
Printed from https://ideas.repec.org/s/eee/reensy28.html
