IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v94y2009i10p1568-1576.html
   My bibliography  Save this article

A joint reliability–redundancy optimization approach for multi-state series–parallel systems

Author

Listed:
  • Tian, Zhigang
  • Levitin, Gregory
  • Zuo, Ming J.

Abstract

In this paper, we present a practical approach for the joint reliability–redundancy optimization of multi-state series–parallel systems. In addition to determining the optimal redundancy level for each parallel subsystem, this approach also aims at finding the optimal values for the variables that affect the component state distributions in each subsystem. The key point is that technical and organizational actions can affect the state transition rates of a multi-state component, and thus affect the state distribution of the component and the availability of the system. Taking this into consideration, we present an approach for determining the optimal versions and numbers of components and the optimal set of technical and organizational actions for each subsystem of a multi-state series–parallel system, so as to minimize the system cost while satisfying the system availability constraint. The approach might be considered to be the multi-state version of the joint system reliability–redundancy optimization methods.

Suggested Citation

  • Tian, Zhigang & Levitin, Gregory & Zuo, Ming J., 2009. "A joint reliability–redundancy optimization approach for multi-state series–parallel systems," Reliability Engineering and System Safety, Elsevier, vol. 94(10), pages 1568-1576.
    • Handle: RePEc:eee:reensy:v:94:y:2009:i:10:p:1568-1576
    DOI: 10.1016/j.ress.2009.02.021
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832009000659
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2009.02.021?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Tian, Zhigang & Zuo, Ming J., 2006. "Redundancy allocation for multi-state systems using physical programming and genetic algorithms," Reliability Engineering and System Safety, Elsevier, vol. 91(9), pages 1049-1056.
    2. Lisnianski, Anatoly, 2007. "Extended block diagram method for a multi-state system reliability assessment," Reliability Engineering and System Safety, Elsevier, vol. 92(12), pages 1601-1607.
    3. Richard E. Barlow & Alexander S. Wu, 1978. "Coherent Systems with Multi-State Components," Mathematics of Operations Research, INFORMS, vol. 3(4), pages 275-281, November.
    4. Gregory Levitin, 2005. "The Universal Generating Function in Reliability Analysis and Optimization," Springer Series in Reliability Engineering, Springer, number 978-1-84628-245-4, March.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Abou, Seraphin C., 2010. "Performance assessment of multi-state systems with critical failure modes: Application to the flotation metallic arsenic circuit," Reliability Engineering and System Safety, Elsevier, vol. 95(6), pages 614-622.
    2. Sheu, Shey-Huei & Chang, Chin-Chih & Chen, Yen-Luan & George Zhang, Zhe, 2015. "Optimal preventive maintenance and repair policies for multi-state systems," Reliability Engineering and System Safety, Elsevier, vol. 140(C), pages 78-87.
    3. Zaretalab, Arash & Sharifi, Mani & Guilani, Pedram Pourkarim & Taghipour, Sharareh & Niaki, Seyed Taghi Akhavan, 2022. "A multi-objective model for optimizing the redundancy allocation, component supplier selection, and reliable activities for multi-state systems," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    4. Huang, Ding-Hsiang & Huang, Cheng-Fu & Lin, Yi-Kuei, 2020. "A novel minimal cut-based algorithm to find all minimal capacity vectors for multi-state flow networks," European Journal of Operational Research, Elsevier, vol. 282(3), pages 1107-1114.
    5. Zhang, Ning & Qi, Faqun & Zhang, Chengjie & Zhou, Hongming, 2022. "Joint optimization of condition-based maintenance policy and buffer capacity for a two-unit series system," Reliability Engineering and System Safety, Elsevier, vol. 219(C).
    6. de Paula, Cassio Pereira & Visnadi, Lais Bittencourt & de Castro, Helio Fiori, 2019. "Multi-objective optimization in redundant system considering load sharing," Reliability Engineering and System Safety, Elsevier, vol. 181(C), pages 17-27.
    7. Xing, Liudong & Amari, Suprasad V. & Wang, Chaonan, 2012. "Reliability of k-out-of-n systems with phased-mission requirements and imperfect fault coverage," Reliability Engineering and System Safety, Elsevier, vol. 103(C), pages 45-50.
    8. Faghih-Roohi, Shahrzad & Xie, Min & Ng, Kien Ming & Yam, Richard C.M., 2014. "Dynamic availability assessment and optimal component design of multi-state weighted k-out-of-n systems," Reliability Engineering and System Safety, Elsevier, vol. 123(C), pages 57-62.
    9. Zhang, Hanxiao & Sun, Muxia & Li, Yan-Fu, 2022. "Reliability–redundancy allocation problem in multi-state flow network: Minimal cut-based approximation scheme," Reliability Engineering and System Safety, Elsevier, vol. 225(C).
    10. Azadeh, A. & Maleki Shoja, B. & Ghanei, S. & Sheikhalishahi, M., 2015. "A multi-objective optimization problem for multi-state series-parallel systems: A two-stage flow-shop manufacturing system," Reliability Engineering and System Safety, Elsevier, vol. 136(C), pages 62-74.
    11. Nourelfath, Mustapha & Châtelet, Eric & Nahas, Nabil, 2012. "Joint redundancy and imperfect preventive maintenance optimization for series–parallel multi-state degraded systems," Reliability Engineering and System Safety, Elsevier, vol. 103(C), pages 51-60.
    12. Liu, Zhitao & Tan, CherMing & Leng, Feng, 2015. "A reliability-based design concept for lithium-ion battery pack in electric vehicles," Reliability Engineering and System Safety, Elsevier, vol. 134(C), pages 169-177.
    13. Ouyang, Zhiyuan & Liu, Yu & Ruan, Sheng-Jia & Jiang, Tao, 2019. "An improved particle swarm optimization algorithm for reliability-redundancy allocation problem with mixed redundancy strategy and heterogeneous components," Reliability Engineering and System Safety, Elsevier, vol. 181(C), pages 62-74.
    14. Zhu, Xiaoyan & Hao, Yaqian, 2021. "Component rearrangement and system replacement for a system with stochastic degradation processes," Reliability Engineering and System Safety, Elsevier, vol. 213(C).
    15. Zaretalab, Arash & Hajipour, Vahid & Tavana, Madjid, 2020. "Redundancy allocation problem with multi-state component systems and reliable supplier selection," Reliability Engineering and System Safety, Elsevier, vol. 193(C).
    16. Pourkarim Guilani, Pedram & Sharifi, Mani & Niaki, S.T.A. & Zaretalab, Arash, 2014. "Reliability evaluation of non-reparable three-state systems using Markov model and its comparison with the UGF and the recursive methods," Reliability Engineering and System Safety, Elsevier, vol. 129(C), pages 29-35.
    17. Fu, Yuqiang & Zhu, Xiaoyan, 2023. "A joint age-based system replacement and component reallocation maintenance policy: Optimization, analysis and resilience," Reliability Engineering and System Safety, Elsevier, vol. 235(C).
    18. Zhang, Yun & Fang, Zhihui & Xu, Zhengguo, 2019. "An optimal design of multi-protocol label switching networks achieving reliability requirements," Reliability Engineering and System Safety, Elsevier, vol. 182(C), pages 133-141.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Dong, Wenjie & Liu, Sifeng & Tao, Liangyan & Cao, Yingsai & Fang, Zhigeng, 2019. "Reliability variation of multi-state components with inertial effect of deteriorating output performances," Reliability Engineering and System Safety, Elsevier, vol. 186(C), pages 176-185.
    2. Wu, Bei & Cui, Lirong & Fang, Chen, 2020. "Multi-state balanced systems with multiple failure criteria," Reliability Engineering and System Safety, Elsevier, vol. 199(C).
    3. Li, Chun-yang & Chen, Xun & Yi, Xiao-shan & Tao, Jun-yong, 2010. "Heterogeneous redundancy optimization for multi-state series–parallel systems subject to common cause failures," Reliability Engineering and System Safety, Elsevier, vol. 95(3), pages 202-207.
    4. M. López-Campos & F. Kristjanpoller & P. Viveros & R. Pascual, 2018. "Reliability Assessment Methodology for Massive Manufacturing Using Multi-Function Equipment," Complexity, Hindawi, vol. 2018, pages 1-8, February.
    5. Jiang, Tao & Liu, Yu, 2017. "Parameter inference for non-repairable multi-state system reliability models by multi-level observation sequences," Reliability Engineering and System Safety, Elsevier, vol. 166(C), pages 3-15.
    6. Coit, David W. & Zio, Enrico, 2019. "The evolution of system reliability optimization," Reliability Engineering and System Safety, Elsevier, vol. 192(C).
    7. Chao-Hui Huang & Chun-Ho Wang, 2016. "Optimization of preventive maintenance for a multi-state degraded system by monitoring component performance," Journal of Intelligent Manufacturing, Springer, vol. 27(6), pages 1151-1170, December.
    8. Zhang, Yongjin & Zhao, Ming & Zhang, Yanjun & Pan, Ruilin & Cai, Jing, 2020. "Dynamic and steady-state performance analysis for multi-state repairable reconfigurable manufacturing systems with buffers," European Journal of Operational Research, Elsevier, vol. 283(2), pages 491-510.
    9. Fitouhi, Mohamed-Chahir & Nourelfath, Mustapha & Gershwin, Stanley B., 2017. "Performance evaluation of a two-machine line with a finite buffer and condition-based maintenance," Reliability Engineering and System Safety, Elsevier, vol. 166(C), pages 61-72.
    10. George-Williams, Hindolo & Patelli, Edoardo, 2016. "A hybrid load flow and event driven simulation approach to multi-state system reliability evaluation," Reliability Engineering and System Safety, Elsevier, vol. 152(C), pages 351-367.
    11. Li, Y.F. & Peng, R., 2014. "Availability modeling and optimization of dynamic multi-state series–parallel systems with random reconfiguration," Reliability Engineering and System Safety, Elsevier, vol. 127(C), pages 47-57.
    12. Shao, Changzheng & Ding, Yi, 2020. "Two-interdependent-performance multi-state system: Definitions and reliability evaluation," Reliability Engineering and System Safety, Elsevier, vol. 199(C).
    13. Jafary, Bentolhoda & Fiondella, Lance, 2016. "A universal generating function-based multi-state system performance model subject to correlated failures," Reliability Engineering and System Safety, Elsevier, vol. 152(C), pages 16-27.
    14. Rashika Gupta & Manju Agarwal, 2006. "Penalty guided genetic search for redundancy optimization in multi-state series-parallel power system," Journal of Combinatorial Optimization, Springer, vol. 12(3), pages 257-277, November.
    15. Zhao, Xian & He, Zongda & Wu, Yaguang & Qiu, Qingan, 2022. "Joint optimization of condition-based performance control and maintenance policies for mission-critical systems," Reliability Engineering and System Safety, Elsevier, vol. 226(C).
    16. Sheng, Yuhong & Ke, Hua, 2020. "Reliability evaluation of uncertain k-out-of-n systems with multiple states," Reliability Engineering and System Safety, Elsevier, vol. 195(C).
    17. Tian, Tianzi & Yang, Jun & Li, Lei & Wang, Ning, 2023. "Reliability assessment of performance-based balanced systems with rebalancing mechanisms," Reliability Engineering and System Safety, Elsevier, vol. 233(C).
    18. Macchi, Marco & Garetti, Marco & Centrone, Domenico & Fumagalli, Luca & Piero Pavirani, Gian, 2012. "Maintenance management of railway infrastructures based on reliability analysis," Reliability Engineering and System Safety, Elsevier, vol. 104(C), pages 71-83.
    19. Chen, Yiming & Liu, Yu & Jiang, Tao, 2021. "Optimal maintenance strategy for multi-state systems with single maintenance capacity and arbitrarily distributed maintenance time," Reliability Engineering and System Safety, Elsevier, vol. 211(C).
    20. Hausken, Kjell & Levitin, Gregory, 2009. "Minmax defense strategy for complex multi-state systems," Reliability Engineering and System Safety, Elsevier, vol. 94(2), pages 577-587.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:94:y:2009:i:10:p:1568-1576. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.