Contact information of Elsevier
Serial Information
Order information: Postal: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
Web:
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
To be notified about new items in this series: Free volume/issue alert on ScienceDirect (see also
NEP)
Download restrictions: Full text for ScienceDirect subscribers only
Editor: J. Yan
Description: Applied Energy provides a forum for information on innovation, research, development and demonstration in the areas of energy conversion and conservation, the optimal use of energy resources, analysis and optimization of energy processes, mitigation of environmental pollutants, and sustainable energy systems. The journal publishes original papers, review articles, technical notes, and letters to editor. Authors are encouraged to submit manuscripts which bridge the gaps between research, development and implementation. The breadth of coverage ranges from innovative technologies and systems of both fossil and renewable energy to the economic industrial and domestic use of energy with no or minor impact on the environment. Applied Energy is also concerned with the attendant problems of modeling and forecasting, conservation strategies, and the environmental, social and economic impacts of energy policies and usage, including climate change mitigation and other environmental pollution reduction.
Series handle: RePEc:eee:appene
ISSN: 0306-2619
Citations RSS feed: at CitEc
Impact factors
Access and download statisticsTop item:
Corrections
All material on this site has been provided by the respective publishers and authors. You can help
correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene. See general information about how to correct material in RePEc.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .
Content
2013, Volume 105, Issue C
- 66-74 Fuel moisture soft-sensor and its validation for the industrial BioPower 5 CHP plant
by Kortela, J. & Jämsä-Jounela, S-L.
- 75-85 Analytical strategies for renewable distributed generation integration considering energy loss minimization
by Hung, Duong Quoc & Mithulananthan, N. & Bansal, R.C.
- 86-98 Experimental study on the performance of hydrogen production from miniature methanol–steam reformer integrated with Swiss-roll type combustor for PEMFC
by Chein, Rei-Yu & Chen, Yen-Cho & Chang, Che-Ming & Chung, J.N.
- 99-107 Effects of exhaust gas recycle in a downsized gasoline engine
by Galloni, E. & Fontana, G. & Palmaccio, R.
- 108-115 Innovative combined heat and power system based on a double shaft intercooled externally fired gas cycle
by Iora, P. & Silva, P.
- 116-124 Experimental study of an automotive Diesel engine efficiency when running under stoichiometric conditions
by Tauzia, Xavier & Maiboom, Alain
- 125-137 Performance evaluation of a polymer electrolyte membrane fuel cell system for powering portable freezer
by Han, Hun Sik & Cho, Changhwan & Kim, Seo Young & Hyun, Jae Min
- 138-154 Modeling of financial incentives for investments in energy storage systems that promote the large-scale integration of wind energy
by Zafirakis, Dimitrios & Chalvatzis, Konstantinos J. & Baiocchi, Giovanni & Daskalakis, George
- 155-160 Experimental investigation of temperature distribution over a planar solid oxide fuel cell
by Razbani, Omid & Wærnhus, Ivar & Assadi, Mohsen
- 161-169 Use of metamodeling optimal approach promotes the performance of proton exchange membrane fuel cell (PEMFC)
by Cheng, Shan-Jen & Miao, Jr-Ming & Wu, Sheng-Ju
- 170-181 Optimal sizing for UPS systems based on batteries and/or fuel cell
by Vasallo, Manuel Jesús & Bravo, José Manuel & Andújar, José Manuel
- 182-193 Feasibility evaluation of solar photovoltaic pumping irrigation system based on analysis of dynamic variation of groundwater table
by Gao, Xuerui & Liu, Jiahong & Zhang, Jun & Yan, Jinyue & Bao, Shujun & Xu, He & Qin, Tao
- 194-206 High strength wastewater treatment accompanied by power generation using air cathode microbial fuel cell
by Sevda, Surajbhan & Dominguez-Benetton, Xochitl & Vanbroekhoven, Karolien & De Wever, Heleen & Sreekrishnan, T.R. & Pant, Deepak
- 207-216 Utilization of wood biomass char in a direct carbon fuel cell (DCFC) system
by Ahn, Seong Yool & Eom, Seong Yong & Rhie, Young Hoon & Sung, Yon Mo & Moon, Cheor Eon & Choi, Gyung Min & Kim, Duck Jool
- 217-222 Harmonizing biodiesel fuel standards in East Asia: Motivations, progress and challenges
by Shi, Xunpeng & Goto, Shinichi
- 223-228 Diesel diffusion flame simulation using reduced n-heptane oxidation mechanism
by Zhang, Kesong & Liang, Zheng & Wang, Jianxin & Wang, Zhiming
- 229-237 Paraffin/diatomite composite phase change material incorporated cement-based composite for thermal energy storage
by Xu, Biwan & Li, Zongjin
- 238-243 Analysis of environmental and economic benefits of integrated Exhaust Energy Recovery (EER) for vehicles
by Peng, Zhijun & Wang, Tianyou & He, Yongling & Yang, Xiaoyi & Lu, Lipeng
- 244-251 Utilization and performance evaluation of a surplus air heat pump system for greenhouse cooling and heating
by Yang, Seung-Hwan & Rhee, Joong Yong
- 252-261 Gaseous and particulate matter emissions of biofuel blends in dual-injection compared to direct-injection and port injection
by Daniel, Ritchie & Xu, Hongming & Wang, Chongming & Richardson, Dave & Shuai, Shijin
- 262-270 Constant pressure hydraulic energy storage through a variable area piston hydraulic accumulator
by Van de Ven, James D.
- 271-281 A two-stage combustion system for burning lean gasoline mixtures in a stationary spark ignited engine
by Szwaja, Stanislaw & Jamrozik, Arkadiusz & Tutak, Wojciech
- 282-292 Offering model for a virtual power plant based on stochastic programming
by Pandžić, Hrvoje & Morales, Juan M. & Conejo, Antonio J. & Kuzle, Igor
- 293-303 Dynamic heat exchanger model for performance prediction and control system design of automotive waste heat recovery systems
by Horst, Tilmann Abbe & Rottengruber, Hermann-Sebastian & Seifert, Marco & Ringler, Jürgen
- 304-318 A multi-level energy management system for multi-source electric vehicles – An integrated rule-based meta-heuristic approach
by Trovão, João P. & Pereirinha, Paulo G. & Jorge, Humberto M. & Antunes, Carlos Henggeler
- 319-326 Fuel properties, engine performance and environmental benefits of biodiesel produced by a green process
by Chattopadhyay, Soham & Sen, Ramkrishna
- 327-334 Novel mixing for ultra-high thermal intensity distributed combustion
by Khalil, Ahmed E.E. & Arghode, Vaibhav K. & Gupta, Ashwani K.
- 335-348 Fuel economy optimization of an Atkinson cycle engine using genetic algorithm
by Zhao, Jinxing & Xu, Min
- 349-357 The valorization of glycerol: Economic assessment of an innovative process for the bioconversion of crude glycerol into ethanol and hydrogen
by Varrone, C. & Liberatore, R. & Crescenzi, T. & Izzo, G. & Wang, A.
- 358-368 Block Configuration Modeling: A novel simulation model to emulate building occupant peer networks and their impact on building energy consumption
by Chen, Jiayu & Jain, Rishee K. & Taylor, John E.
- 369-379 Cathode–anode side interaction in SOFC hybrid systems
by Ferrari, Mario L. & Massardo, Aristide F.
- 380-388 Ultrasound-assisted transesterification of crude Jatropha oil using alumina-supported heteropolyacid catalyst
by Badday, Ali Sabri & Abdullah, Ahmad Zuhairi & Lee, Keat-Teong
- 389-394 Ethanol production by simultaneous saccharification and fermentation in rotary drum reactor using thermotolerant Kluveromyces marxianus
by Lin, Yu-Sheng & Lee, Wen-Chien & Duan, Kow-Jen & Lin, Yen-Han
- 395-406 Scenario analysis of large scale algae production in tubular photobioreactors
by Slegers, P.M. & van Beveren, P.J.M. & Wijffels, R.H. & van Straten, G. & van Boxtel, A.J.B.
- 407-417 The effects of spark timing, unburned gas temperature, and negative valve overlap on the rates of stoichiometric spark assisted compression ignition combustion
by Olesky, Laura Manofsky & Martz, Jason B. & Lavoie, George A. & Vavra, Jiri & Assanis, Dennis N. & Babajimopoulos, Aristotelis
- 418-422 Stochastic unit commitment with sub-hourly dispatch constraints
by Wang, Jiadong & Wang, Jianhui & Liu, Cong & Ruiz, Juan P.
- 423-429 What moves wind energy development in China? Show me the money!
by Lam, J.C.K. & Woo, C.K. & Kahrl, F. & Yu, W.K.
- 430-438 Thermophotovoltaics on the move to applications
by Bitnar, Bernd & Durisch, Wilhelm & Holzner, Reto
2013, Volume 104, Issue C
- 1-9 A methodology for the low-cost optimisation of small wind turbine performance
by Arroyo, A. & Manana, M. & Gomez, C. & Fernandez, I. & Delgado, F. & Zobaa, Ahmed F.
- 10-20 Bioenergy production and forest multifunctionality: A trade-off analysis using multiscale GIS model in a case study in Italy
by Sacchelli, Sandro & De Meo, Isabella & Paletto, Alessandro
- 21-41 Numerical simulations of carbon monoxide poisoning in high temperature proton exchange membrane fuel cells with various flow channel designs
by Jiao, Kui & Zhou, Yibo & Du, Qing & Yin, Yan & Yu, Shuhai & Li, Xianguo
- 42-49 Continuous wind speed models based on stochastic differential equations
by Zárate-Miñano, Rafael & Anghel, Marian & Milano, Federico
- 50-61 A new shape design method of salt cavern used as underground gas storage
by Wang, Tongtao & Yan, Xiangzhen & Yang, Henglin & Yang, Xiujuan & Jiang, Tingting & Zhao, Shuai
- 62-70 A comparison of different pre-treatments to increase methane production from two agricultural substrates
by Sambusiti, C. & Monlau, F. & Ficara, E. & Carrère, H. & Malpei, F.
- 71-78 Hydrogen addition effects on high intensity distributed combustion
by Khalil, Ahmed E.E. & Gupta, Ashwani K.
- 79-86 Comparison of pinned and finned tubes in a phase change thermal energy storage system using CFD
by Tay, N.H.S. & Bruno, F. & Belusko, M.
- 87-104 Achieving better energy-efficient air conditioning – A review of technologies and strategies
by Chua, K.J. & Chou, S.K. & Yang, W.M. & Yan, J.
- 105-116 Energy and emissions efficiency patterns of Chinese regions: A multi-directional efficiency analysis
by Wang, Ke & Wei, Yi-Ming & Zhang, Xian
- 117-127 HVAC systems testing and check: A simplified model to predict thermal comfort conditions in moderate environments
by Buratti, C. & Ricciardi, P. & Vergoni, M.
- 128-136 Analysis of potential energy, economic and environmental savings in residential buildings: Solar collectors combined with microturbines
by Suárez, I. & Prieto, M.M. & Fernández, F.J.
- 137-148 Experimental investigation of dynamic melting in a tube-in-tank PCM system
by Tay, N.H.S. & Bruno, F. & Belusko, M.
- 149-157 Sensitivity of combustion noise and NOx and soot emissions to pilot injection in PCCI Diesel engines
by Torregrosa, A.J. & Broatch, A. & García, A. & Mónico, L.F.
- 158-169 Associations of individual, household and environmental characteristics with carbon dioxide emissions from motorised passenger travel
by Brand, Christian & Goodman, Anna & Rutter, Harry & Song, Yena & Ogilvie, David
- 170-177 Assessment of the resource associated with biomethane from food waste
by Browne, James D. & Murphy, Jerry D.
- 178-186 Economic assessment of the mobilized thermal energy storage (M-TES) system for distributed heat supply
by Li, Hailong & Wang, Weilong & Yan, Jinyue & Dahlquist, Erik
- 187-196 The selection of volume ratio of two-stage rotary compressor and its effects on air-to-water heat pump with flash tank cycle
by Ko, Younghwan & Park, Sangkyoung & Jin, Simon & Kim, Byungsoon & Jeong, Ji Hwan
- 197-206 Low severity dilute-acid hydrolysis of sweet sorghum bagasse
by Banerji, Aditi & Balakrishnan, M. & Kishore, V.V.N.
- 207-219 Potential of air-side economizers for data center cooling: A case study for key Australian cities
by Siriwardana, Jayantha & Jayasekara, Saliya & Halgamuge, Saman K.
- 220-228 Investigating the price discovery and risk transfer functions in the crude oil and gasoline futures markets: Some empirical evidence
by Zhang, Yue-Jun & Wang, Zi-Yi
- 229-238 Hierarchical market integration of responsive loads as spinning reserve
by Wang, D. & Parkinson, S. & Miao, W. & Jia, H. & Crawford, C. & Djilali, N.
- 239-249 Economic and environmental impact of lead-acid batteries in grid-connected domestic PV systems
by McKenna, Eoghan & McManus, Marcelle & Cooper, Sam & Thomson, Murray
- 250-257 Optimal operation scheduling of a pumping station with multiple pumps
by Zhuan, Xiangtao & Xia, Xiaohua
- 258-267 An empirical analysis of the role of China’s exports on CO2 emissions
by Michieka, Nyakundi M. & Fletcher, Jerald & Burnett, Wesley
- 268-275 Effect of rotational speed on the performances of a desiccant wheel
by Angrisani, Giovanni & Roselli, Carlo & Sasso, Maurizio
- 276-285 Exploring drivers for energy efficiency within small- and medium-sized enterprises: First evidences from Italian manufacturing enterprises
by Cagno, Enrico & Trianni, Andrea
- 286-296 Performance of a pellet boiler fired with agricultural fuels
by Carvalho, Lara & Wopienka, Elisabeth & Pointner, Christian & Lundgren, Joakim & Verma, Vijay Kumar & Haslinger, Walter & Schmidl, Christoph
- 297-305 Exploring the nexus of electricity consumption, economic growth, energy prices and technology innovation in Malaysia
by Tang, Chor Foon & Tan, Eu Chye
- 306-309 Catalytic activity of Ni3S2 and effects of reactor wall in hydrogen production from water with hydrogen sulphide as a reducer under hydrothermal conditions
by Wang, Yuanqing & Jin, Fangming & Zeng, Xu & Ma, Cuixiang & Wang, Fengwen & Yao, Guodong & Jing, Zhenzi
- 310-318 The dynamic links between CO2 emissions, economic growth and coal consumption in China and India
by Chandran Govindaraju, V.G.R. & Tang, Chor Foon
- 319-325 Energy market integration and equitable growth across countries
by Sheng, Yu & Shi, Xunpeng
- 326-336 Energy harvesting from the FC stack that operates using the MPP tracking based on modified extremum seeking control
by Bizon, Nicu
- 337-344 A case study on energy consumption and overheating for a UK industrial building with rooflights
by Wang, Xiaoxin & Kendrick, Christopher & Ogden, Raymond & Walliman, Nicholas & Baiche, Bousmaha
- 345-352 Biomass production of Scenedesmus obliquus from mixtures of urban and olive-oil mill wastewaters used as culture medium
by Hodaifa, Gassan & Sánchez, Sebastián & Martínez, Mª. Eugenia & Órpez, Rafael
- 353-361 A mixed integer non-linear programming model for tactical value chain optimization of a wood biomass power plant
by Shabani, Nazanin & Sowlati, Taraneh
- 362-370 Using Taguchi method on combustion performance of a diesel engine with diesel/biodiesel blend and port-inducting H2
by Wu, Horng-Wen & Wu, Zhan-Yi
- 371-378 Are fluctuations in energy variables permanent or transitory? A survey of the literature on the integration properties of energy consumption and production
by Smyth, Russell
- 379-391 Development of polynomial regression models for composite dynamic envelopes’ thermal performance forecasting
by Mavromatidis, Lazaros Elias & Bykalyuk, Anna & Lequay, Hervé
- 392-399 Analytical models for the computation and optimization of single and double glazing flat plate solar collectors with normal and small air gap spacing
by Subiantoro, Alison & Ooi, Kim Tiow
- 400-407 Air-breathing membraneless laminar flow-based fuel cells: Do they breathe enough oxygen?
by Xuan, Jin & Leung, D.Y.C. & Wang, Huizhi & Leung, Michael K.H. & Wang, Bin & Ni, Meng
- 408-417 Impact of finite-rate kinetics on carbon conversion in a high-pressure, single-stage entrained flow gasifier with coal–CO2 slurry feed
by Botero, Cristina & Field, Randall P. & Herzog, Howard J. & Ghoniem, Ahmed F.
- 418-433 Adsorbents for the post-combustion capture of CO2 using rapid temperature swing or vacuum swing adsorption
by Hedin, Niklas & Andersson, Linnéa & Bergström, Lennart & Yan, Jinyue
- 434-444 Thermal and water management of low temperature Proton Exchange Membrane Fuel Cell in fork-lift truck power system
by Hosseinzadeh, Elham & Rokni, Masoud & Rabbani, Abid & Mortensen, Henrik Hilleke
- 445-456 Electric vehicles and large-scale integration of wind power – The case of Inner Mongolia in China
by Liu, Wen & Hu, Weihao & Lund, Henrik & Chen, Zhe
- 457-465 Energy conservation in China: Key provincial sectors at two-digit level
by Liao, Hua & Du, Jian & Wei, Yi-Ming
- 466-474 Impact assessment of global and national biofuels developments on agriculture in Pakistan
by Ali, Tariq & Huang, Jikun & Yang, Jun
- 475-486 Macroeconomic effects of oil price shocks in Brazil and in the United States
by Cavalcanti, Tiago & Jalles, João Tovar
- 487-496 Strategic perspectives on energy management: A case study in the process industry
by Rudberg, Martin & Waldemarsson, Martin & Lidestam, Helene
- 497-502 Consistent ocean wave energy harvesting using electroactive polymer (dielectric elastomer) artificial muscle generators
by Chiba, S. & Waki, M. & Wada, T. & Hirakawa, Y. & Masuda, K. & Ikoma, T.
- 503-509 Recoverable and reusable hydrochloric acid used as a homogeneous catalyst for biodiesel production
by Su, Chia-Hung
- 510-516 Analytical model for short-time responses of ground heat exchangers with U-shaped tubes: Model development and validation
by Li, Min & Lai, Alvin C.K.
- 517-526 Integration of bioethanol as an in-process material in biorefineries using mass pinch analysis
by Martinez-Hernandez, Elias & Sadhukhan, Jhuma & Campbell, Grant M.
- 527-537 Predicting the behavior of a grid-connected photovoltaic system from measurements of solar radiation and ambient temperature
by Hernandez, J. & Gordillo, G. & Vallejo, W.
- 538-553 A review of solar collectors and thermal energy storage in solar thermal applications
by Tian, Y. & Zhao, C.Y.
- 554-567 An overview of developments in adsorption refrigeration systems towards a sustainable way of cooling
by Choudhury, Biplab & Saha, Bidyut Baran & Chatterjee, Pradip K. & Sarkar, Jyoti Prakas
- 568-575 A spectroscopy study of gasoline partially premixed compression ignition spark assisted combustion
by Pastor, J.V. & García-Oliver, J.M. & García, A. & Micó, C. & Durrett, R.
- 576-582 Trends in global warming and human health impacts related to Brazilian sugarcane ethanol production considering black carbon emissions
by Galdos, Marcelo & Cavalett, Otávio & Seabra, Joaquim E.A. & Nogueira, Luiz Augusto Horta & Bonomi, Antonio
- 583-591 Flexibility of a combined heat and power system with thermal energy storage for district heating
by Nuytten, Thomas & Claessens, Bert & Paredis, Kristof & Van Bael, Johan & Six, Daan
- 592-602 A novel hybrid process of reverse electrodialysis and reverse osmosis for low energy seawater desalination and brine management
by Li, Weiyi & Krantz, William B. & Cornelissen, Emile R. & Post, Jan W. & Verliefde, Arne R.D. & Tang, Chuyang Y.
- 603-610 Simulation of thermal performance of horizontal slinky-loop heat exchangers for ground source heat pumps
by Chong, Chiew Shan Anthony & Gan, Guohui & Verhoef, Anne & Garcia, Raquel Gonzalez & Vidale, Pier Luigi
- 611-622 A techno-economic evaluation of a biomass energy conversion park
by Van Dael, Miet & Van Passel, Steven & Pelkmans, Luc & Guisson, Ruben & Reumermann, Patrick & Luzardo, Nathalie Marquez & Witters, Nele & Broeze, Jan
- 623-632 Integrated biomass-based production of district heat, electricity, motor fuels and pellets of different scales
by Truong, Nguyen Le & Gustavsson, Leif
- 633-641 Environmental performance of crop residues as an energy source for electricity production: The case of wheat straw in Denmark
by Nguyen, Thu Lan T. & Hermansen, John E. & Mogensen, Lisbeth
- 642-652 The role of grid extensions in a cost-efficient transformation of the European electricity system until 2050
by Fürsch, Michaela & Hagspiel, Simeon & Jägemann, Cosima & Nagl, Stephan & Lindenberger, Dietmar & Tröster, Eckehard
- 653-665 CFD modeling of oxy-coal combustion: Prediction of burnout, volatile and NO precursors release
by Álvarez, L. & Gharebaghi, M. & Jones, J.M. & Pourkashanian, M. & Williams, A. & Riaza, J. & Pevida, C. & Pis, J.J. & Rubiera, F.
- 666-682 Integration of intermittent renewable power supply using grid-connected vehicles – A 2030 case study for California and Germany
by Dallinger, David & Gerda, Schubert & Wietschel, Martin
- 683-710 A review on novel processes of biodiesel production from waste cooking oil
by Talebian-Kiakalaieh, Amin & Amin, Nor Aishah Saidina & Mazaheri, Hossein
- 711-722 Electric storage in California’s commercial buildings
by Stadler, M. & Kloess, M. & Groissböck, M. & Cardoso, G. & Sharma, R. & Bozchalui, M.C. & Marnay, C.
- 723-739 Development of an Environment and energy Geographical Information System (E-GIS) construction model to support environmentally friendly urban planning
by Yeo, In-Ae & Yoon, Seong-Hwan & Yee, Jurng-Jae
- 740-750 Off-grid photovoltaic vehicle charge using second life lithium batteries: An experimental and numerical investigation
by Tong, Shi Jie & Same, Adam & Kootstra, Mark A. & Park, Jae Wan
- 751-757 Evaluation of self-water-removal in a dead-ended proton exchange membrane fuel cell
by Wan, Zhongmin & Liu, Jing & Luo, Zhiping & Tu, Zhengkai & Liu, Zhichun & Liu, Wei
- 758-771 Methodology to design a bottoming Rankine cycle, as a waste energy recovering system in vehicles. Study in a HDD engine
by Macián, V. & Serrano, J.R. & Dolz, V. & Sánchez, J.
- 772-776 Effect of reaction parameters on the quality of captured sulfur in Claus process
by Selim, H. & Gupta, A.K. & Al Shoaibi, A.
- 777-782 Direct conversion of liquid natural gas (LNG) to syngas and ethylene using non-equilibrium pulsed discharge
by Ding, Mingyue & Hayakawa, Taichi & Zeng, Chunyang & Jin, Yuzhou & Zhang, Qi & Wang, Tiejun & Ma, Longlong & Yoneyama, Yoshiharu & Tsubaki, Noritatsu
- 783-790 A novel graphical approach to target CO2 emissions for energy resource planning and utility system optimization
by Al-Mayyahi, Mohmmad A. & Hoadley, Andrew F.A. & Rangaiah, G.P.
- 791-800 Modeling of TABS-based thermally manageable buildings in Simulink
by Ma, Peizheng & Wang, Lin-Shu & Guo, Nianhua
- 801-809 Qualitative and quantitative analysis of lignocellulosic biomass using infrared techniques: A mini-review
by Xu, Feng & Yu, Jianming & Tesso, Tesfaye & Dowell, Floyd & Wang, Donghai
- 810-821 A hybrid multi-effect distillation and adsorption cycle
by Thu, Kyaw & Kim, Young-Deuk & Amy, Gary & Chun, Won Gee & Ng, Kim Choon
- 822-833 Reliability assessment of photovoltaic power systems: Review of current status and future perspectives
by Zhang, Peng & Li, Wenyuan & Li, Sherwin & Wang, Yang & Xiao, Weidong
- 834-844 An overview of data for wake model evaluation in the Virtual Wakes Laboratory
by Barthelmie, R.J. & Pryor, S.C.
- 845-859 Green roofs in European climates. Are effective solutions for the energy savings in air-conditioning?
by Ascione, Fabrizio & Bianco, Nicola & de’ Rossi, Filippo & Turni, Gianluca & Vanoli, Giuseppe Peter
- 860-868 Producing liquid transportation fuels from heterotrophic microalgae
by Liang, Yanna
- 869-879 IGCC–EPI: Decentralized concept of a highly load-flexible IGCC power plant for excess power integration
by Buttler, Alexander & Kunze, Christian & Spliethoff, Hartmut
- 880-889 The sclerosis of regional electricity intensities in Italy: An aggregate and sectoral analysis
by Vaona, Andrea
- 890-897 Gelled graphite/gelatin composites for latent heat cold storage
by Vitorino, Nuno & Abrantes, João C.C. & Frade, Jorge Ribeiro
- 898-904 Surface roughness effect on the metallic bipolar plates of a proton exchange membrane fuel cell
by Lin, Chien-Hung
- 905-909 Improved yield of solvent free enzymatic methanolysis of palm and jatropha oils blended with castor oil
by Maleki, Esmat & Aroua, Mohamed Kheireddine & Sulaiman, Nik Meriam Nik
- 910-923 Optimization criteria for cogeneration systems: Multi-objective approach and application in an hospital facility
by Gimelli, Alfredo & Muccillo, Massimiliano
- 924-935 Sustainable urban energy planning: The case study of a tropical city
by Sampaio, Henrique César & Dias, Rubens Alves & Balestieri, José Antônio Perrella
- 936-944 Profit and policy implications of producing biodiesel–ethanol–diesel fuel blends to specification
by Lin, Jiefeng & Gaustad, Gabrielle & Trabold, Thomas A.
- 945-957 Robust control of the PEM fuel cell air-feed system via sub-optimal second order sliding mode
by Matraji, Imad & Laghrouche, Salah & Jemei, Samir & Wack, Maxime
- 958-977 Nonlinear heat transfer processes in a two-phase thermofluidic oscillator
by Markides, Christos N. & Osuolale, Adebayo & Solanki, Roochi & Stan, Guy-Bart V.
- 978-983 A new bladeless hydraulic turbine
by Beran, V. & Sedláček, M. & Marˇs´ık, F.
- 984-991 Optimizing solid oxide fuel cell cathode processing route for intermediate temperature operation
by Ortiz-Vitoriano, N. & Bernuy-López, C. & Ruiz de Larramendi, I. & Knibbe, R. & Thydén, K. & Hauch, A. & Holtappels, P. & Rojo, T.
- 992-1002 Study on the effect of engine operation parameters on cyclic combustion variations and correlation coefficient between the pressure-related parameters of a CNG engine
by Zhang, H.G. & Han, X.J. & Yao, B.F. & Li, G.X.
2013, Volume 103, Issue C
- 1-11 Transient effect of soil thermal conductivity and duration of operation on performance of Earth Air Tunnel Heat Exchanger
by Bansal, Vikas & Misra, Rohit & Agarwal, Ghanshyam Das & Mathur, Jyotirmay
- 12-24 Evaluation of thermal response and performance of PHC energy pile: Field experiments and numerical simulation
by Park, Hyunku & Lee, Seung-Rae & Yoon, Seok & Choi, Jung-Chan
- 25-31 Feasibility of utilizing renewable energy systems for a small hotel in Ajloun city, Jordan
by Aagreh, Yaser & Al-Ghzawi, Audai
- 32-38 Feasibility of rice straw as alternate substrate for biobutanol production
by Ranjan, Amrita & Khanna, Swati & Moholkar, V.S.
- 39-51 Intelligent demand side energy management system for autonomous polygeneration microgrids
by Kyriakarakos, George & Piromalis, Dimitrios D. & Dounis, Anastasios I. & Arvanitis, Konstantinos G. & Papadakis, George
- 52-60 Assessing the state of knowledge of utility-scale wind energy development and operation on non-volant terrestrial and marine wildlife
by Lovich, Jeffrey E. & Ennen, Joshua R.
- 61-72 Anaerobic treatment of apple waste with swine manure for biogas production: Batch and continuous operation
by Kafle, Gopi Krishna & Kim, Sang Hun
- 73-84 Thermal analysis of solar receiver pipes with superheated steam
by Roldán, M.I. & Valenzuela, L. & Zarza, E.
- 85-96 Experimental analysis of an on demand external domestic hot water production system using four control strategies
by Fernández-Seara, José & Uhía, Francisco J. & Pardiñas, Ángel Á. & Bastos, Santiago
- 97-108 Study on performance of energy-efficient retrofitting measures on commercial building external walls in cooling-dominant cities
by Huang, Yu & Niu, Jian-lei & Chung, Tse-ming
- 109-115 Effect of water and air flow on concentric tubular solar water desalting system
by Arunkumar, T. & Jayaprakash, R. & Ahsan, Amimul & Denkenberger, D. & Okundamiya, M.S.
- 116-127 Characterization of a radial turbocharger turbine in pulsating flow by means of CFD and its application to engine modeling
by Galindo, J. & Fajardo, P. & Navarro, R. & García-Cuevas, L.M.
- 128-134 Evaluation and comparison of algal cell disruption methods: Microwave, waterbath, blender, ultrasonic and laser treatment
by McMillan, Jonathan R. & Watson, Ian A. & Ali, Mehmood & Jaafar, Weaam
- 135-144 A two-stage stochastic programming model for the optimal design of distributed energy systems
by Zhou, Zhe & Zhang, Jianyun & Liu, Pei & Li, Zheng & Georgiadis, Michael C. & Pistikopoulos, Efstratios N.
- 145-154 Economic analysis and optimal energy management models for microgrid systems: A case study in Taiwan
by Chen, Yen-Haw & Lu, Su-Ying & Chang, Yung-Ruei & Lee, Ta-Tung & Hu, Ming-Che
- 155-164 Optimum capacity determination of stand-alone hybrid generation system considering cost and reliability
by Chen, Hung-Cheng
- 165-179 Compressed air energy storage (CAES) with compressors distributed at heat loads to enable waste heat utilization
by Safaei, Hossein & Keith, David W. & Hugo, Ronald J.
- 180-188 Experimental investigation of frost and defrost performance of microchannel heat exchangers for heat pump systems
by Xu, Bo & Han, Qing & Chen, Jiangping & Li, Feng & Wang, Nianjie & Li, Dong & Pan, Xiaoyong
- 189-196 Stochastic production planning for a biofuel supply chain under demand and price uncertainties
by Awudu, Iddrisu & Zhang, Jun
- 197-206 Investigation on potential applicability of subsurface cooling in Singapore
by Liu, Y. & Qin, X.S. & Chiew, Y.M.
- 207-211 Increasing the rate capability of batteries with electrolyte flow
by Kim, Sun Ung & Monroe, Charles W.
- 212-220 An overview on non-platinum cathode catalysts for direct methanol fuel cell
by Karim, N.A. & Kamarudin, S.K.
- 221-233 A fast and accurate physics-based model for the NOx emissions of Diesel engines
by Asprion, Jonas & Chinellato, Oscar & Guzzella, Lino
- 234-242 Using geographic information systems to assess potential biofuel crop production on urban marginal lands
by Niblick, Briana & Monnell, Jason D. & Zhao, Xi & Landis, Amy E.
- 243-255 Benefits of hydraulic layout over driving system in piezo-injectors and proposal of a new-concept CR injector with an integrated Minirail
by Ferrari, A. & Mittica, A. & Spessa, E.
- 256-265 Cyclic operation of molten-salt thermal energy storage in thermoclines for solar power plants
by Yang, Zhen & Garimella, Suresh V.
- 266-277 CFD analysis based parametric study of derating factor for Earth Air Tunnel Heat Exchanger
by Misra, Rohit & Bansal, Vikas & Agrawal, Ghanshyam Das & Mathur, Jyotirmay & Aseri, Tarun K.
- 278-289 Simulation of photovoltaic centrals with dynamic shading
by Sánchez Reinoso, Carlos R. & Milone, Diego H. & Buitrago, Román H.
- 290-297 Intensified thermal integration in batch reactive distillation
by Maiti, Debadrita & Jana, Amiya K. & Samanta, Amar Nath
- 298-305 Heliostat-field gain-scheduling control applied to a two-step solar hydrogen production plant
by Roca, Lidia & de la Calle, Alberto & Yebra, Luis J.
- 306-316 Analysis of the energy and environmental effects of green car deployment by an integrating energy system model with a forecasting model
by Lee, Duk Hee & Park, Sang Yong & Hong, Jong Chul & Choi, Sang Jin & Kim, Jong Wook
- 317-327 Effects of reaction chamber geometry on the performance and heat/mass transport phenomenon for a cylindrical methanol steam reformer
by Perng, Shiang-Wuu & Horng, Rong-Fang & Ku, Hui-Wen
- 328-340 Kernel ridge regression with active learning for wind speed prediction
by Douak, Fouzi & Melgani, Farid & Benoudjit, Nabil
- 341-349 A process for biodiesel production involving the heterotrophic fermentation of Chlorella protothecoides with glycerol as the carbon source
by Cerón-García, M.C. & Macías-Sánchez, M.D. & Sánchez-Mirón, A. & García-Camacho, F. & Molina-Grima, E.
- 350-357 Operating condition optimization of corncob hydrothermal conversion for bio-oil production
by Gan, Jing & Yuan, Wenqiao
- 358-367 Optimization of thermoacoustic refrigerators using second law analysis
by Piccolo, A.
- 368-374 Swarm intelligence and gravitational search algorithm for multi-objective optimization of synthesis gas production
by Ganesan, T. & Elamvazuthi, I. & Ku Shaari, Ku Zilati & Vasant, P.
- 375-392 Extinction, discharge, and thrust characteristics of methanol fueled meso-scale thrust chamber
by Shirsat, V. & Gupta, A.K.
- 393-399 Heat storage properties of the cement mortar incorporated with composite phase change material
by Li, Min & Wu, Zhishen & Tan, Jinmiao
- 400-415 Computational studies on a latent thermal energy storage system with integral heat pipes for concentrating solar power
by Nithyanandam, K. & Pitchumani, R.
- 416-427 A coupled numerical approach on museum air conditioning: Energy and fluid-dynamic analysis
by Ascione, Fabrizio & Bellia, Laura & Capozzoli, Alfonso
- 428-434 Alkali production from bipolar membrane electrodialysis powered by microbial fuel cell and application for biogas upgrading
by Chen, Man & Zhang, Fang & Zhang, Yan & Zeng, Raymond J.
- 435-443 A frequency domain approach to characterize and analyze wind speed patterns
by Jung, Jaesung & Tam, Kwa-Sur
- 444-467 Biodiesel from microalgae: A critical evaluation from laboratory to large scale production
by Rawat, I. & Ranjith Kumar, R. & Mutanda, T. & Bux, F.
- 468-476 Process consideration of fry-drying combined with steam compression for efficient fuel production from sewage sludge
by Hong, Sungpyo & Ryu, Changkook & Ko, Han Seo & Ohm, Tae-In & Chae, Jong-Seong
- 477-487 Optimal sizing of plug-in fuel cell electric vehicles using models of vehicle performance and system cost
by Xu, Liangfei & Ouyang, Minggao & Li, Jianqiu & Yang, Fuyuan & Lu, Languang & Hua, Jianfeng
- 488-506 Total cost of ownership, payback, and consumer preference modeling of plug-in hybrid electric vehicles
by Al-Alawi, Baha M. & Bradley, Thomas H.
- 507-513 Ti4O7 supported Ru@Pt core–shell catalyst for CO-tolerance in PEM fuel cell hydrogen oxidation reaction
by Zhang, Lei & Kim, Jenny & Zhang, Jiujun & Nan, Feihong & Gauquelin, Nicolas & Botton, Gianluigi A. & He, Ping & Bashyam, Rajesh & Knights, Shanna
- 514-521 Steam treatment of four softwood species and bark to produce torrefied wood
by Tooyserkani, Zahra & Sokhansanj, Shahab & Bi, Xiaotao & Lim, Jim & Lau, Anthony & Saddler, Jack & Kumar, Linoj & Lam, Pak Sui & Melin, Staffan
- 522-538 Analysis of the control structure of wind energy generation systems based on a permanent magnet synchronous generator
by Carranza, O. & Figueres, E. & Garcerá, G. & Gonzalez-Medina, R.
- 539-551 Framework for the implementation of a new renewable energy system in an educational facility
by Hong, Taehoon & Koo, Choongwan & Kwak, Taehyun
- 552-561 Exergy analysis of a high-temperature-steam-driven, varied-pressure, humidification–dehumidification system coupled with reverse osmosis
by Al-Sulaiman, Fahad A. & Prakash Narayan, G. & Lienhard, John H.
- 562-570 Reflective coatings for interior and exterior of buildings and improving thermal performance
by Joudi, Ali & Svedung, Harald & Cehlin, Mathias & Rönnelid, Mats
- 571-580 Experimental study on the effects of the operation conditions on the performance of a chemisorption air conditioner powered by low grade heat
by Kiplagat, J.K. & Wang, R.Z. & Oliveira, R.G. & Li, T.X. & Liang, M.
- 581-587 Experimental study on the hydrogen charge and discharge rates of metal hydride tanks using heat pipes to enhance heat transfer
by Chung, C.A. & Yang, Su-Wen & Yang, Chien-Yuh & Hsu, Che-Weu & Chiu, Pai-Yuh
- 588-606 Solar heating and cooling systems by CPVT and ET solar collectors: A novel transient simulation model
by Buonomano, A. & Calise, F. & Palombo, A.
- 607-617 Incorporating available micro gas turbines and fuel cell: Matching considerations and performance evaluation
by Bakalis, Diamantis P. & Stamatis, Anastassios G.
- 618-626 Design guidelines for thermo-photo-voltaic generator: The critical role of the emitter size
by Attolini, G. & Bosi, M. & Ferrari, C. & Melino, F.
- 627-641 Calibration and uncertainty analysis for computer models – A meta-model based approach for integrated building energy simulation
by Manfren, Massimiliano & Aste, Niccolò & Moshksar, Reza
- 642-652 A review on solar stills for brine desalination
by Xiao, Gang & Wang, Xihui & Ni, Mingjiang & Wang, Fei & Zhu, Weijun & Luo, Zhongyang & Cen, Kefa
- 653-670 An aggregated energy security performance indicator
by Martchamadol, Jutamanee & Kumar, S.
- 671-678 A hybrid solar and chemical looping combustion system for solar thermal energy storage
by Jafarian, Mehdi & Arjomandi, Maziar & Nathan, Graham J.
- 679-684 Grass pellet Quality Index: A tool to evaluate suitability of grass pellets for small scale combustion systems
by Cherney, Jerome H. & Verma, Vijay Kumar
- 685-691 Energy efficiency of elevated water supply tanks for high-rise buildings
by Cheung, C.T. & Mui, K.W. & Wong, L.T.