Contact information of Elsevier
Serial Information
Download restrictions: Full text for ScienceDirect subscribers only
Series handle: RePEc:eee:energy
ISSN: 0360-5442
Citations RSS feed: at CitEc
Impact factors
Access and download statisticsTop item:
Corrections
All material on this site has been provided by the respective publishers and authors. You can help
correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy. See general information about how to correct material in RePEc.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .
Content
2017, Volume 122, Issue C
- 528-541 Ramp forecasting performance from improved short-term wind power forecasting over multiple spatial and temporal scales
by Zhang, Jie & Cui, Mingjian & Hodge, Bri-Mathias & Florita, Anthony & Freedman, Jeffrey
- 542-551 Distribution generation by photovoltaic and diesel generator systems: Energy management and size optimization by a new approach for a stand-alone application
by Askarzadeh, Alireza
- 552-559 The knock study of methanol fuel based on multi-dimensional simulation analysis
by Zhen, Xudong & Liu, Daming & Wang, Yang
- 560-569 Optimal energy management strategy for self-reconfigurable batteries
by Bouchhima, Nejmeddine & Schnierle, Marc & Schulte, Sascha & Birke, Kai Peter
- 570-578 Sensitivity analysis and multi-objective optimization of CO2CPU process using response surface methodology
by Koohestanian, Esmaeil & Samimi, Abdolreza & Mohebbi-Kalhori, Davod & Sadeghi, Jafar
- 579-587 Energy-saving railway systems based on superconducting power transmission
by Tomita, Masaru & Suzuki, Kenji & Fukumoto, Yusuke & Ishihara, Atsushi & Akasaka, Tomoyuki & Kobayashi, Yusuke
- 588-600 Battery capacity and recharging needs for electric buses in city transit service
by Gao, Zhiming & Lin, Zhenhong & LaClair, Tim J. & Liu, Changzheng & Li, Jan-Mou & Birky, Alicia K. & Ward, Jacob
- 601-612 Sliding-mode and Lyapunov function-based control for battery/supercapacitor hybrid energy storage system used in electric vehicles
by Song, Ziyou & Hou, Jun & Hofmann, Heath & Li, Jianqiu & Ouyang, Minggao
- 613-626 A data-driven analytical approach to enable optimal emerging technologies integration in the co-optimized electricity and ancillary service markets
by Chen, Yang & Hu, Mengqi & Zhou, Zhi
- 627-637 An experimental study of partial admission losses with various blade tip clearances using a linear cascade
by Cho, Soo-Yong & Cho, Chong-Hyun & Choi, Sang-Kyu
- 638-648 Performance, combustion and emission characteristics of diesel engine fuelled with waste cooking oil bio-diesel/diesel blends with additives
by Senthur Prabu, S. & Asokan, M.A. & Roy, Rahul & Francis, Steff & Sreelekh, M.K.
- 649-662 Uncertainty analysis of an integrated energy system based on information theory
by Fu, Xueqian & Sun, Hongbin & Guo, Qinglai & Pan, Zhaoguang & Xiong, Wen & Wang, Li
- 663-674 90–100% renewable electricity for the South West Interconnected System of Western Australia
by Lu, Bin & Blakers, Andrew & Stocks, Matthew
- 675-690 Parameter extraction of polymer electrolyte membrane fuel cell based on quasi-dynamic model and periphery signals
by Xu, Liangfei & Fang, Chuan & Hu, Junming & Cheng, Siliang & Li, Jianqiu & Ouyang, Minggao & Lehnert, Werner
- 691-700 Field evaluation of microencapsulated phase change material slurry in ground source heat pump systems
by Kong, Minsuk & Alvarado, Jorge L. & Thies, Curt & Morefield, Sean & Marsh, Charles P.
- 701-710 Comparing projections of industrial energy demand and greenhouse gas emissions in long-term energy models
by Edelenbosch, O.Y. & Kermeli, K. & Crijns-Graus, W. & Worrell, E. & Bibas, R. & Fais, B. & Fujimori, S. & Kyle, P. & Sano, F. & van Vuuren, D.P.
- 711-723 Climate effects of electricity production fuelled by coal, forest slash and municipal solid waste with and without carbon capture
by Sathre, Roger & Gustavsson, Leif & Truong, Nguyen Le
- 724-745 Insight into progress in pre-treatment of lignocellulosic biomass
by Bhutto, Abdul Waheed & Qureshi, Khadija & Harijan, Khanji & Abro, Rashid & Abbas, Tauqeer & Bazmi, Aqeel Ahmed & Karim, Sadia & Yu, Guangren
- 748-766 Gradient decent based multi-objective cultural differential evolution for short-term hydrothermal optimal scheduling of economic emission with integrating wind power and photovoltaic power
by Zhang, Huifeng & Yue, Dong & Xie, Xiangpeng & Dou, Chunxia & Sun, Feng
- 767-778 Equivalent electricity storage capacity of domestic thermostatically controlled loads
by Sossan, Fabrizio
- 779-786 Destruction mechanism of the internal structure in Lithium-ion batteries used in aviation industry
by Swornowski, Paweł J.
- 787-800 Thermodynamic performance evaluation of transcritical carbon dioxide refrigeration cycle integrated with thermoelectric subcooler and expander
by Dai, Baomin & Liu, Shengchun & Zhu, Kai & Sun, Zhili & Ma, Yitai
- 801-810 Methodology of determining the optimum performances of future concentrating solar thermal power plants in Algeria
by Mihoub, Sofiane & Chermiti, Ali & Beltagy, Hani
2017, Volume 121, Issue C
- 1-9 Effect of rotor aspect ratio and solidity on a straight-bladed vertical axis wind turbine in three-dimensional analysis by the panel method
by Li, Qing'an & Maeda, Takao & Kamada, Yasunari & Shimizu, Kento & Ogasawara, Tatsuhiko & Nakai, Alisa & Kasuya, Takuji
- 10-20 Detailed kinetic modeling of acetylene decomposition/soot formation during quenching of coal pyrolysis in thermal plasma
by Yan, Binhang & Cheng, Yan & Li, Tianyang & Cheng, Yi
- 21-31 Research on the effects of injection strategy on LTC combustion based on two-stage fuel injection
by Shi, Lei & Xiao, Wei & Li, Mengyu & Lou, Lin & Deng, Kang-yao
- 32-42 Design method of a power management strategy for variable battery capacities range-extended electric vehicles to improve energy efficiency and cost-effectiveness
by Du, Jiuyu & Chen, Jingfu & Song, Ziyou & Gao, Mingming & Ouyang, Minggao
- 43-54 Experimental investigation of a spark ignition engine fueled with acetone-butanol-ethanol and gasoline blends
by Li, Yuqiang & Meng, Lei & Nithyanandan, Karthik & Lee, Timothy H. & Lin, Yilu & Lee, Chia-fon F. & Liao, Shengming
- 55-65 Experimental investigation on the thermal performance of cooling pipes embedded in a graphitization furnace
by Shen, Chong & Zhang, Maoyong & Li, Xianting
- 66-77 Heuristic approach for the economic optimisation of combined heat and power (CHP) plants: Operating strategy, heat storage and power
by Vögelin, Philipp & Koch, Ben & Georges, Gil & Boulouchos, Konstatinos
- 78-91 The prospects of bioenergy in the future energy system of Inland Norway
by Hagos, Dejene Assefa & Gebremedhin, Alemayehu & Bolkesjø, Torjus Folsland
- 92-106 Investment decisions considering economic, environmental and social factors: An actors' perspective for the electricity sector of Mexico
by Jano-Ito, Marco A. & Crawford-Brown, Douglas
- 107-113 Energy modelling towards low carbon development of Beijing in 2030
by Zhao, Guangling & Guerrero, Josep M. & Jiang, Kejun & Chen, Sha
- 114-125 Day-ahead scheduling of virtual power plant in joint energy and regulation reserve markets under uncertainties
by Shayegan-Rad, Ali & Badri, Ali & Zangeneh, Ali
- 126-134 Exploring the range of energy savings likely from energy efficiency retrofit measures in Ireland's residential sector
by Dineen, D. & Ó Gallachóir, B.P.
- 135-146 Exergy analyses of the oxygen blast furnace with top gas recycling process
by Zhang, Wei & Zhang, Juhua & Xue, Zhengliang
- 147-158 Evaluation of lower heating value and elemental composition of bamboo using near infrared spectroscopy
by Posom, Jetsada & Sirisomboon, Panmanas
- 159-175 Methane combustion in MILD oxyfuel regime: Influences of dilution atmosphere in co-flow configuration
by Chen, Sheng & Liu, Hao & Zheng, Chuguang
- 176-184 Numerical evaluation of wave energy potential in the south of Brazil
by Lisboa, Rodrigo C. & Teixeira, Paulo R.F. & Fortes, Conceição Juana
- 185-192 Role of trace elements in single and two-stage digestion of food waste at high organic loading rates
by Voelklein, M.A. & O' Shea, R. & Jacob, A. & Murphy, J.D.
- 193-204 Control structure design and dynamics modelling of the organic Rankine cycle system
by Jolevski, Danijel & Bego, Ozren & Sarajcev, Petar
- 205-219 Comparative design of plug and recirculation RO systems; thermoeconomic: Case study
by Khanarmuei, Mohammadreza & Ahmadisedigh, Hossein & Ebrahimi, Iman & Gosselin, Louis & Mokhtari, Hamid
- 220-237 Techno-economic analysis of a concentrating solar collector with built-in shell and tube latent heat thermal energy storage
by Li, Qiyuan & Tehrani, S. Saeed Mostafavi & Taylor, Robert A.
- 238-245 Synthesis of Co3O4 macrocubes catalyst using novel chitosan/urea template for hydrogen generation from sodium borohydride
by Tomboc, Gracita Raquel M. & Tamboli, Ashif H. & Kim, Hern
- 246-255 Electricity generation prospects from clustered smallholder and irrigated rice farms in Ghana
by Arranz-Piera, Pol & Kemausuor, Francis & Addo, Ahmad & Velo, Enrique
- 256-263 Modeling and experimental validation of a unitized regenerative fuel cell in electrolysis mode of operation
by Bhosale, Amit C. & Mane, Swapnil R. & Singdeo, Debanand & Ghosh, Prakash C.
- 264-275 Oil refining in a CO2 constrained world: Effects of carbon pricing on refineries globally
by Abdul-Manan, Amir F.N. & Arfaj, Abdullah & Babiker, Hassan
- 276-291 A modified gravitational search algorithm based on a non-dominated sorting genetic approach for hydro-thermal-wind economic emission dispatching
by Chen, Fang & Zhou, Jianzhong & Wang, Chao & Li, Chunlong & Lu, Peng
- 292-305 Minimising the machining energy consumption of a machine tool by sequencing the features of a part
by Hu, Luoke & Peng, Chen & Evans, Steve & Peng, Tao & Liu, Ying & Tang, Renzhong & Tiwari, Ashutosh
- 306-317 Simultaneous optimization of multi-plant heat integration using intermediate fluid circles
by Chang, Chenglin & Chen, Xiaolu & Wang, Yufei & Feng, Xiao
- 318-330 Overall performance assessment for scramjet with boundary-layer ejection control based on thermodynamics
by He, Yubao & Cao, Ruifeng & Huang, Hongyan & Qin, Jiang & Yu, Daren
- 331-340 Experimental investigation of low-level water in waste-oil produced biodiesel-diesel fuel blend
by Khalife, Esmail & Kazerooni, Hanif & Mirsalim, Mostafa & Roodbar Shojaei, Taha & Mohammadi, Pouya & Salleh, Amran Mohd & Najafi, Bahman & Tabatabaei, Meisam
- 341-355 A novel wake energy reuse method to optimize the layout for Savonius-type vertical axis wind turbines
by Zhang, Baoshou & Song, Baowei & Mao, Zhaoyong & Tian, Wenlong
- 356-371 Production performance analysis of heavy oil recovery by cyclic superheated steam stimulation
by Sun, Fengrui & Li, Chunlan & Cheng, Linsong & Huang, Shijun & Zou, Ming & Sun, Qun & Wu, Xiaojun
- 372-387 Eco-reliable path finding in time-variant and stochastic networks
by Li, Wenjie & Yang, Lixing & Wang, Li & Zhou, Xuesong & Liu, Ronghui & Gao, Ziyou
- 388-402 A new hybrid decision framework for prioritizing funding allocation to Iran's energy sector
by Alipour, M. & Alighaleh, S. & Hafezi, R. & Omranievardi, M.
- 403-426 Two-stage MINLP algorithm for the optimal synthesis and design of networks of CHP units
by Elsido, Cristina & Bischi, Aldo & Silva, Paolo & Martelli, Emanuele
- 427-432 Simulation design and performance evaluation of a thermoelectric refrigerator with inhomogeneously-doped nanomaterials
by Wang, Junyi & Wang, Yuan & Su, Shanhe & Chen, Jincan
- 433-448 Optimization of the piston bowl geometry and the operating conditions of a gasoline-diesel dual-fuel engine based on a compression ignition engine
by Lee, Seungpil & Park, Sungwook
- 449-465 Modeling systemic risk of crude oil imports: Case of China’s global oil supply chain
by Sun, Xiaolei & Liu, Chang & Chen, Xiuwen & Li, Jianping
- 466-479 Update and review of heat flow measurements in México
by Espinoza-Ojeda, O.M. & Prol-Ledesma, R.M. & Iglesias, E.R. & Figueroa-Soto, A.
- 480-490 Stochastic scheduling of local distribution systems considering high penetration of plug-in electric vehicles and renewable energy sources
by Tabatabaee, Sajad & Mortazavi, Seyed Saeedallah & Niknam, Taher
- 491-512 Gas turbine generating units control via feedback linearization approach
by Bonfiglio, A. & Cacciacarne, S. & Invernizzi, M. & Procopio, R. & Schiano, S. & Torre, I.
- 513-523 Dynamic behavior and transfer function of collector field in once-through DSG solar trough power plants
by Guo, Su & Liu, Deyou & Chu, Yinghao & Chen, Xingying & Xu, Chang & Liu, Qunming & Guo, Tiezheng
- 524-532 A novel approach for acquiring the real-time energy efficiency of machine tools
by Liu, Peiji & Liu, Fei & Qiu, Hang
- 533-544 Large Eddy Simulation of flow around a single and two in-line horizontal-axis wind turbines
by Amin Allah, Veisi & Shafiei Mayam, Mohammad Hossein
- 545-560 A thermoelectric generator for scavenging gas-heat: From module optimization to prototype test
by Cheng, Fuqiang & Hong, Yanji & Li, Weiping & Guo, Xiaohong & Zhang, Hailong & Fu, Feng & Feng, Bingqing & Wang, Gang & Wang, Chao & Qin, Haibing
- 561-569 Wind farm multi-objective wake redirection for optimizing power production and loads
by van Dijk, Mike T. & van Wingerden, Jan-Willem & Ashuri, Turaj & Li, Yaoyu
- 570-598 Integrated thermoeconomic optimization of standard and regenerative ORC for different heat source types and capacities
by Braimakis, Konstantinos & Karellas, Sotirios
- 599-605 Overestimation of savings in energy efficiency obligation schemes
by Moser, Simon
- 606-615 Development of a new methodology to optimize building life cycle cost, environmental impacts, and occupant satisfaction
by Mostavi, Ehsan & Asadi, Somayeh & Boussaa, Djamel
- 616-630 Numerical analysis of the influence of spherical turbulence generators on heat transfer enhancement of flat plate solar air heater
by Manjunath, M.S. & Karanth, K.Vasudeva & Sharma, N.Yagnesh
- 631-642 Exploring the suitability of electric vehicles in the United States
by Onat, Nuri C. & Noori, Mehdi & Kucukvar, Murat & Zhao, Yang & Tatari, Omer & Chester, Mikhail
- 643-656 Selection and design of post-combustion CO2 capture process for 600 MW natural gas fueled thermal power plant based on operability
by Dutta, Rohan & Nord, Lars O. & Bolland, Olav
- 657-675 Experimental study on the effects of mixture flow rate, equivalence ratio, oxygen enhancement, and geometrical parameters on propane-air premixed flame dynamics in non-adiabatic meso-scale reactors
by Baigmohammadi, Mohammadreza & Tabejamaat, Sadegh & Faghani-Lamraski, Morteza
- 676-694 Storing energy for cooling demand management in tropical climates: A techno-economic comparison between different energy storage technologies
by Comodi, Gabriele & Carducci, Francesco & Sze, Jia Yin & Balamurugan, Nagarajan & Romagnoli, Alessandro
- 695-715 Assessing the potential role of concentrated solar power (CSP) for the northeast power system of Brazil using a detailed power system model
by Fichter, Tobias & Soria, Rafael & Szklo, Alexandre & Schaeffer, Roberto & Lucena, Andre F.P.
- 716-725 Analysis of the combustion process of syngas fuels containing high hydrocarbons and nitrogen compounds in Zonal Volumetric Combustion technology
by Szewczyk, Dariusz & Ślefarski, Rafał & Jankowski, Radosław
- 726-738 Far-infrared irradiation drying behavior of typical biomass briquettes
by Chen, N.N. & Chen, M.Q. & Fu, B.A. & Song, J.J.
- 739-750 Modeling and state-of-charge prediction of lithium-ion battery and ultracapacitor hybrids with a co-estimator
by Wang, Yujie & Liu, Chang & Pan, Rui & Chen, Zonghai
- 751-771 Thermodynamic, environmental and economic performance optimization of simple, regenerative, STIG and RSTIG gas turbine cycles
by Kayadelen, Hasan Kayhan & Ust, Yasin
- 772-780 Economic assessment of liquefied natural gas (LNG) as a marine fuel for CO2 carriers compared to marine gas oil (MGO)
by Yoo, Byeong-Yong
- 781-791 Steady-state flow computation in gas distribution networks with multiple pressure levels
by Cavalieri, Francesco
- 792-802 Structured, physically inspired (gray box) models versus black box modeling for forecasting the output power of photovoltaic plants
by Paulescu, Marius & Brabec, Marek & Boata, Remus & Badescu, Viorel
- 803-821 An open-source model for optimal design and operation of industrial energy systems
by Atabay, Dennis
- 822-831 Inter-fuel substitution possibilities in South Africa: A translog production function approach
by Lin, Boqiang & Atsagli, Philip
- 832-840 Power by waste heat recovery from low temperature industrial flue gas by Organic Flash Cycle (OFC) and transcritical-CO2 power cycle: A comparative study through combined thermodynamic and economic analysis
by Mondal, Subha & De, Sudipta
- 841-853 The influence of oxygenated fuels on transient and steady-state engine emissions
by Zare, Ali & Bodisco, Timothy A. & Nabi, Md Nurun & Hossain, Farhad M. & Rahman, M.M. & Ristovski, Zoran D. & Brown, Richard J.
- 854-864 Analytical and numerical investigation of unsteady wind for enhanced energy capture in a fluctuating free-stream
by Wekesa, David Wafula & Wang, Cong & Wei, Yingjie & Danao, Louis Angelo M.
- 865-883 Optimisation of oil palm biomass and palm oil mill effluent (POME) utilisation pathway for palm oil mill cluster with consideration of BioCNG distribution network
by Theo, Wai Lip & Lim, Jeng Shiun & Ho, Wai Shin & Hashim, Haslenda & Lee, Chew Tin & Muis, Zarina Abdul
- 884-891 Technical and economic potential of highly efficient boiler technologies in the Korean industrial sector
by Park, Nyun-Bae & Park, Sang Yong & Kim, Jong-Jin & Choi, Dong Gu & Yun, Bo Yeong & Hong, Jong Chul
2017, Volume 120, Issue C
- 1-11 Impact of the geometry of divergent chimneys on the power output of a solar chimney power plant
by Hu, Siyang & Leung, Dennis Y.C. & Chan, John C.Y.
- 12-19 Self-humidifying Pt-C/Pt-TiO2 dual-catalyst electrode membrane assembly for proton-exchange membrane fuel cells
by Yang, H.N. & Lee, W.H. & Choi, B.S. & Ko, Y.D. & Yi, S.C. & Kim, W.J.
- 20-33 Numerical simulation of the heat extraction in EGS with thermal-hydraulic-mechanical coupling method based on discrete fractures model
by Sun, Zhi-xue & Zhang, Xu & Xu, Yi & Yao, Jun & Wang, Hao-xuan & Lv, Shuhuan & Sun, Zhi-lei & Huang, Yong & Cai, Ming-yu & Huang, Xiaoxue
- 34-46 Maximum combustion temperature for coal-water slurry containing petrochemicals
by Strizhak, Pavel A. & Vershinina, Ksenia Yu.
- 47-57 Extended Kalman Filtering to estimate temperature and irradiation for maximum power point tracking of a photovoltaic module
by Docimo, D.J. & Ghanaatpishe, M. & Mamun, A.
- 58-66 How to enhance the future use of energy policy simulation models through ex post validation
by Qudrat-Ullah, Hassan
- 67-78 Energy optimization and analysis modeling based on extreme learning machine integrated index decomposition analysis: Application to complex chemical processes
by Geng, Zhiqiang & Yang, Xiao & Han, Yongming & Zhu, Qunxiong
- 79-91 Crude oil price behaviour before and after military conflicts and geopolitical events
by Monge, Manuel & Gil-Alana, Luis A. & Pérez de Gracia, Fernando
- 92-105 Optimal distribution transformer sizing in a harmonic involved load environment via dynamic programming technique
by Hajipour, Ehsan & Mohiti, Maryam & Farzin, Nima & Vakilian, Mehdi
- 106-116 In-cylinder pressure-based air-fuel ratio control for lean burn operation mode of SI engines
by Kumar, Madan & Shen, Tielong
- 117-127 Levelized cost of energy modeling for concentrated solar power projects: A China study
by Zhao, Zhen-Yu & Chen, Yu-Long & Thomson, John Douglas
- 128-137 A novel LNG/O2 combustion gas and steam mixture cycle with energy storage and CO2 capture
by Chen, Yaping & Zhu, Zilong & Wu, Jiafeng & Yang, Shifan & Zhang, Baohuai
- 138-152 Critical factors in energy generation from microalgae
by Naraharisetti, Pavan Kumar & Das, Probir & Sharratt, Paul N.
- 153-163 Maximization of energy recovery inside supersonic separator in the presence of condensation and normal shock wave
by Shooshtari, S.H. Rajaee & Shahsavand, A.
- 164-178 The substitution of wind power for coal-fired power to realize China's CO2 emissions reduction targets in 2020 and 2030
by Zhao, Xiaoli & Cai, Qiong & Zhang, Sufang & Luo, Kaiyan
- 179-191 Influence analysis of static and dynamic fast-charging current profiles on ageing performance of commercial lithium-ion batteries
by Abdel-Monem, Mohamed & Trad, Khiem & Omar, Noshin & Hegazy, Omar & Van den Bossche, Peter & Van Mierlo, Joeri
- 192-198 Methane recovery from natural gas hydrate with simulated IGCC syngas
by Ding, Ya-Long & Xu, Chun-Gang & Yu, Yi-Song & Li, Xiao-Sen
- 199-208 Forecasting method for global radiation time series without training phase: Comparison with other well-known prediction methodologies
by Voyant, Cyril & Motte, Fabrice & Fouilloy, Alexis & Notton, Gilles & Paoli, Christophe & Nivet, Marie-Laure
- 209-216 Adapted computational method of energy level and energy quality evolution for combined cooling, heating and power systems with energy storage units
by Jiang, Xi Zhuo & Wang, Xiangyu & Feng, Lejun & Zheng, Danxing & Shi, Lin
- 217-228 Modeling of China's cassava-based bioethanol supply chain operation and coordination
by Ye, Fei & Li, Yina & Lin, Qiang & Zhan, Yuanzhu
- 229-240 Implementation methodology of powertrain for series-hybrid military vehicles applications equipped with hybrid energy storage
by Lee, Seongjun & Kim, Jonghoon
- 241-252 Optimal day ahead scheduling of combined heat and power units with electrical and thermal storage considering security constraint of power system
by Kia, Mohsen & Nazar, Mehrdad Setayesh & Sepasian, Mohammad Sadegh & Heidari, Alireza & Siano, Pierluigi
- 253-261 Rotational speed control and electrical rated power of an oscillating-water-column wave energy converter
by Falcão, A.F.O. & Henriques, J.C.C. & Gato, L.M.C.
- 262-275 Modeling and techno-economic analysis of the integration of a FC-based micro-CHP system for residential application with a heat pump
by Sorace, Marco & Gandiglio, Marta & Santarelli, Massimo
- 276-282 An optofluidic planar microreactor for photocatalytic reduction of CO2 in alkaline environment
by Cheng, Xiao & Chen, Rong & Zhu, Xun & Liao, Qiang & An, Liang & Ye, Dingding & He, Xuefeng & Li, Shuzhe & Li, Lin
- 283-292 Fossil energy saving and CO2 emissions reduction performance, and dynamic change in performance considering renewable energy input
by Chen, Weidong & Geng, Wenxin
- 293-305 Thermal conditions and heat transfer characteristics of high-temperature solid oxide fuel cells investigated by three-dimensional numerical simulations
by Lee, Sanghyeok & Park, Mansoo & Kim, Hyoungchul & Yoon, Kyung Joong & Son, Ji-Won & Lee, Jong-Ho & Kim, Byung-Kook & Choi, Wonjoon & Hong, Jongsup
- 306-319 Thermodynamic performance assessment of an integrated geothermal powered supercritical regenerative organic Rankine cycle and parabolic trough solar collectors
by Cakici, Duygu Melek & Erdogan, Anil & Colpan, Can Ozgur
- 320-331 Pumped thermal energy storage and bottoming system part A: Concept and model
by Abarr, Miles & Geels, Brendan & Hertzberg, Jean & Montoya, Lupita D.
- 332-345 Wind and wave energy potential in southern Caspian Sea using uncertainty analysis
by Amirinia, Gholamreza & Kamranzad, Bahareh & Mafi, Somayeh
- 346-361 Multi-objective differential evolution optimization based on uniform decomposition for wind turbine blade design
by Wang, Long & Wang, Tongguang & Wu, Jianghai & Chen, Guoping
- 362-373 Characteristics of CO2 hydrate formation/dissociation in H2O + THF aqueous solution and estimation of CO2 emission reduction by district cooling application
by Kim, Shol & Lee, Seong Hyuk & Kang, Yong Tae
- 374-384 A life-cycle comparison of the energy, environmental and economic impacts of coal versus wood pellets for generating heat in China
by Wang, Changbo & Chang, Yuan & Zhang, Lixiao & Pang, Mingyue & Hao, Yan
- 385-396 Impact assessment of electric vehicles on islands grids: A case study for Tenerife (Spain)
by Colmenar-Santos, Antonio & Linares-Mena, Ana-Rosa & Borge-Diez, David & Quinto-Alemany, Carlos-Domingo
- 397-416 District heating systems based on low-carbon energy technologies in Mediterranean areas
by Lizana, Jesús & Ortiz, Carlos & Soltero, Víctor M. & Chacartegui, Ricardo
- 417-430 Maximizing hosting capacity of renewable energy sources in distribution networks: A multi-objective and scenario-based approach
by Rabiee, Abbas & Mohseni-Bonab, Seyed Masoud
- 431-440 Performance characteristics of a horizontal axis turbine with fusion winglet
by Zhu, Bing & Sun, Xiaojing & Wang, Ying & Huang, Diangui
- 441-449 Clean coal technology for removal dust using moving granular bed filter
by Chen, Yi-Shun & Hsu, Chia-Jen & Hsiau, Shu-San & Ma, Sheng-Ming
- 450-467 Comparative analysis of different wave turbine designs based on conditions relevant to northern coast of Egypt
by Shehata, Ahmed S. & Xiao, Qing & El-Shaib, Mohamed & Sharara, Ashraf & Alexander, Day
- 468-477 Heat integration of methanol steam reformer with a high-temperature polymeric electrolyte membrane fuel cell
by Ribeirinha, P. & Alves, I. & Vázquez, F. Vidal & Schuller, G. & Boaventura, M. & Mendes, A.
- 478-487 Numerical investigation on double gas diffusion backing layer functionalized on water removal in a proton exchange membrane fuel cell
by Kong, Im Mo & Jung, Aeri & Kim, Young Sang & Kim, Min Soo
- 488-497 Dynamic model linearization of two shafts gas turbine via their input/output data around the equilibrium points
by Hadroug, Nadji & Hafaifa, Ahmed & Kouzou, Abdellah & Chaibet, Ahmed
- 498-506 Gas-particle flows and erosion characteristic of large capacity dry top gas pressure recovery turbine
by Cai, Liuxi & Xiao, Junfeng & Wang, Shunsen & Gao, Song & Duan, Jingyao & Mao, Jingru
- 507-517 Synthetic wind speed scenarios generation for probabilistic analysis of hybrid energy systems
by Chen, Jun & Rabiti, Cristian
- 518-536 Insight into stall delay and computation of 3D sectional aerofoil characteristics of NREL phase VI wind turbine using inverse BEM and improvement in BEM analysis accounting for stall delay effect
by Syed Ahmed Kabir, Ijaz Fazil & Ng, E.Y.K.
- 537-548 Performance evaluation of micromorph based thin film photovoltaic modules in real operating conditions of composite climate
by Rawat, Rahul & Singh, Ramayan & Sastry, O.S. & Kaushik, S.C.
- 549-564 Analysis and comparison of solar-heat driven Stirling, Brayton and Rankine cycles for space power generation
by Toro, Claudia & Lior, Noam
- 565-572 A novel method for optimal fuel consumption estimation and planning for transportation systems
by Wörz, Sascha & Bernhardt, Heinz
- 573-583 Techno-economic analysis of a 10 kWp utility interactive photovoltaic system at Maungaraki school, Wellington, New Zealand
by Emmanuel, Michael & Akinyele, Daniel & Rayudu, Ramesh
- 584-596 Prospects for Chinese electric vehicle technologies in 2016–2020: Ambition and rationality
by Du, Jiuyu & Ouyang, Minggao & Chen, Jingfu
- 597-607 Heat transfer, pressure drop and structural analysis of a finned plate ceramic heat exchanger
by de Mello, Paulo Eduardo Batista & Villanueva, Helio Henrique Santomo & Scuotto, Sérgio & Donato, Gustavo Henrique Bolognesi & Ortega, Fernando dos Santos
- 608-618 Boosting the adoption and the reliability of renewable energy sources: Mitigating the large-scale wind power intermittency through vehicle to grid technology
by Zhao, Yang & Noori, Mehdi & Tatari, Omer
- 619-631 An agro-industrial model for the optimization of biodiesel production in Spain to meet the European GHG reduction targets
by Escobar, Neus & Manrique-de-Lara-Peñate, Casiano & Sanjuán, Neus & Clemente, Gabriela & Rozakis, Stelios
- 632-641 Adoption barriers for electric vehicles: Experiences from early adopters in Sweden
by Vassileva, Iana & Campillo, Javier
- 642-651 Demand management to mitigate impacts of plug-in electric vehicle fast charge in buildings with renewables
by Sehar, Fakeha & Pipattanasomporn, Manisa & Rahman, Saifur
- 652-662 Applying data envelopment analysis to evaluation of energy efficiency and decreasing of greenhouse gas emissions of fattening farms
by Hosseinzadeh-Bandbafha, Homa & Safarzadeh, Dariush & Ahmadi, Ebrahim & Nabavi-Pelesaraei, Ashkan & Hosseinzadeh-Bandbafha, Ehssan
- 663-674 A modeling approach to co-firing biomass/coal blends in pulverized coal utility boilers: Synergistic effects and emissions profiles
by Pérez-Jeldres, Rubén & Cornejo, Pablo & Flores, Mauricio & Gordon, Alfredo & García, Ximena
- 675-685 Energy consumption, inter-fuel substitution and economic growth in Nigeria
by Lin, Boqiang & Atsagli, Philip
- 686-697 Influence of the power take-off characteristics on the performance of CECO wave energy converter
by López, M. & Taveira-Pinto, F. & Rosa-Santos, P.
- 698-704 Formation of clathrate cages of sI methane hydrate revealed by ab initio study
by Liu, Jinxiang & Hou, Jian & Xu, Jiafang & Liu, Haiying & Chen, Gang & Zhang, Jun
- 705-717 Experimental investigation and introduction of a similarity parameter for characterizing the heat and mass transfer in polymer desiccant wheels
by Kang, Hyungmook & Lee, Dae-Young
- 718-730 Influence of simulation assumptions and input parameters on energy balance calculations of residential buildings
by Dodoo, Ambrose & Tettey, Uniben Yao Ayikoe & Gustavsson, Leif
- 731-739 Thermal modelling with experimental validation and economic analysis of mono crystalline silicon photovoltaic module on the basis of degradation study
by Rajput, Pramod & Tiwari, G.N. & Sastry, O.S.
- 740-750 Energy network dispatch optimization under emergency of local energy shortage with web tool for automatic large group decision-making
by Xiang, Liu
- 751-773 Experimental investigation of simple solar radiation spectral model performances under a Mediterranean Algerian's climate
by Koussa, Mustapha & Saheb-Koussa, Djohra & Hadji, Seddik
- 774-784 Energy optimization for maximum energy saving with optimal modification in Continuous Catalytic Regeneration Reformer Process
by Babaqi, Badiea S. & Takriff, Mohd S. & Kamarudin, Siti K. & Othman, Nur Tantiyani A. & Ba-Abbad, Muneer M.
- 785-795 Utilizing primary energy savings and exergy destruction to compare centralized thermal plants and cogeneration/trigeneration systems
by Espirito Santo, Denilson Boschiero do & Gallo, Waldyr Luiz Ribeiro
- 796-804 A comparative thermodynamic study on the CO2 conversion in the synthesis of methanol and of DME
by Ateka, Ainara & Pérez-Uriarte, Paula & Gamero, Mónica & Ereña, Javier & Aguayo, Andrés T. & Bilbao, Javier
- 805-815 Castor oil preheater selection based on entropy generation and exergy effectiveness criteria
by Perdomo-Hurtado, Luis & Rincón Tabares, Juan Sebastián & Correa, Danahe Marmolejo & Perdomo, Felipe A.
- 816-826 A novel ammonia-water combined power and refrigeration cycle with two different cooling temperature levels
by Barkhordarian, Orbel & Behbahaninia, Ali & Bahrampoury, Rasool
- 827-841 Mixing and evaporation analysis of a high-pressure SCR system using a hybrid LES-RANS approach
by Kaario, Ossi Tapani & Vuorinen, Ville & Zhu, Lei & Larmi, Martti & Liu, Ronghou
- 842-853 Influence of zero valent iron nanoparticles and magnetic iron oxide nanoparticles on biogas and methane production from anaerobic digestion of manure
by Abdelsalam, E. & Samer, M. & Attia, Y.A. & Abdel-Hadi, M.A. & Hassan, H.E. & Badr, Y.
- 854-863 Deterioration of palm biodiesel fuel under common rail diesel engine operation
by Chandran, Davannendran & Ng, Hoon Kiat & Lau, Harrison Lik Nang & Gan, Suyin & Choo, Yuen May
- 864-871 Influence of torrefaction on the characteristics and pyrolysis behavior of cellulose
by Wang, Shurong & Dai, Gongxin & Ru, Bin & Zhao, Yuan & Wang, Xiaoliu & Xiao, Gang & Luo, Zhongyang
- 872-883 Exergy analysis of a solar-powered vacuum membrane distillation unit using two models
by Miladi, Rihab & Frikha, Nader & Gabsi, Slimane
- 884-894 Preparation of high-purity nano-CaCO3 from steel slag
by Jo, Hoyong & Lee, Min-Gu & Park, Jinwon & Jung, Kwang-Deog
- 895-906 Harnessing the synergies between lipid-based crystallization modifiers and a polymer pour point depressant to improve pour point of biodiesel
by Mohanan, Athira & Bouzidi, Laziz & Narine, Suresh S.
- 907-914 Renewable fuels from pyrolysis of Dunaliella tertiolecta: An alternative approach to biochemical conversions of microalgae
by Söyler, Nejmi & Goldfarb, Jillian L. & Ceylan, Selim & Saçan, Melek Türker
- 915-928 Characteristics of the gas produced during biomass direct gasification in an autothermal pilot-scale bubbling fluidized bed reactor
by Pio, D.T. & Tarelho, L.A.C. & Matos, M.A.A.
- 929-936 Effects of carbon dioxide on pyrolysis of peat
by Lee, Jechan & Yang, Xiao & Song, Hocheol & Ok, Yong Sik & Kwon, Eilhann E.
- 937-946 Building scenarios for energy consumption of private households in Germany using a multi-level cross-impact balance approach
by Vögele, Stefan & Hansen, Patrick & Poganietz, Witold-Roger & Prehofer, Sigrid & Weimer-Jehle, Wolfgang
- 947-958 Application of artificial neural network method to exergy and energy analyses of fluidized bed dryer for potato cubes
by Azadbakht, Mohsen & Aghili, Hajar & Ziaratban, Armin & Torshizi, Mohammad Vahedi
- 959-974 Proposals for power generation based on processes consuming biomass-glycerol slurries
by de Souza-Santos, Marcio L.
- 975-984 A lead-acid battery's remaining useful life prediction by using electrochemical model in the Particle Filtering framework
by Lyu, Chao & Lai, Qingzhi & Ge, Tengfei & Yu, Honghai & Wang, Lixin & Ma, Na
- 985-995 A hybrid BAG-SA optimal approach to estimate energy demand of China
by Wu, Qunli & Peng, Chenyang
- 996-1011 Coordinated transmission substations and sub-transmission networks expansion planning incorporating distributed generation
by Kiani Rad, H. & Moravej, Z.
- 1012-1024 Dynamic modeling of an industrial gas turbine in loading and unloading conditions using a gray box method
by Mehrpanahi, Abdollah & Payganeh, Gholamhasan & Arbabtafti, Mohammadreza
- 1025-1033 Some less-discussed externalities of contemporary electric vehicle mania in Canada
by Wong, Alfred
2017, Volume 119, Issue C
- 1-9 Effects of catalysts on pyrolysis of castor meal
by Chen, Guan-Bang & Li, Yueh-Heng & Chen, Guan-Lin & Wu, Wen-Teng
- 10-25 A Unified Total Site Heat Integration targeting method for isothermal and non-isothermal utilities
by Tarighaleslami, Amir H. & Walmsley, Timothy G. & Atkins, Martin J. & Walmsley, Michael R.W. & Liew, Peng Yen & Neale, James R.
- 26-36 Spray combustion characteristics of kerosene/bio-oil part I: Experimental study
by Yang, S.I. & Wu, M.S. & Hsu, T.C.
- 37-43 CO2 gasification process performance for energetic valorization of microalgae
by Soreanu, G. & Tomaszewicz, M. & Fernandez-Lopez, M. & Valverde, J.L. & Zuwała, J. & Sanchez-Silva, L.
- 44-52 Emission, injection and combustion characteristics of biodiesel and oxygenated fuel blends in a common rail diesel engine
by Alptekin, Ertan
- 53-66 Under-expanded jets and dispersion in high pressure CO2 releases from an industrial scale pipeline
by Guo, Xiaolu & Yan, Xingqing & Zheng, Yangguang & Yu, Jianliang & Zhang, Yongchun & Chen, Shaoyun & Chen, Lin & Mahgerefteh, Haroun & Martynov, Sergey & Collard, Alexander & Brown, Solomon
- 67-76 The impacts of emissions accounting methods on an imperfect competitive carbon trading market
by Xia, Yan & Tang, Zhipeng
- 77-85 The PROMETHEE multiple criteria decision making analysis for selecting the best membrane prepared from sulfonated poly(ether ketone)s and poly(ether sulfone)s for proton exchange membrane fuel cell
by Nikouei, Mohammad Ali & Oroujzadeh, Maryam & Mehdipour-Ataei, Shahram
- 86-93 Influence of new adsorbents with isotherm Type V on performance of an adsorption heat pump
by Gediz Ilis, Gamze
- 94-109 Profitability, risk, and financial modeling of energy storage in residential and large scale applications
by Berrada, Asmae & Loudiyi, Khalid & Zorkani, Izeddine
- 110-120 Optimization of coal-based methanol distillation scheme using process superstructure method to maximize energy efficiency
by Cui, Chengtian & Li, Xingang & Sui, Hong & Sun, Jinsheng
- 121-137 An experimental evaluation of unique CO2 flow behaviour in loosely held fine particles rich sandstone under deep reservoir conditions and influencing factors
by De Silva, G.P.D. & Ranjith, P.G. & Perera, M.S.A. & Dai, Z.X. & Yang, S.Q.
- 138-151 Spray characteristics, engine performance and emissions analysis for Karanja biodiesel and its blends
by Lee, Sanghoon & Lee, Chang Sik & Park, Sungwook & Gupta, Jai Gopal & Maurya, Rakesh Kumar & Agarwal, Avinash Kumar
- 152-166 Modelling non-stationary time series using a peaks over threshold distribution with time varying covariates and threshold: An application to peak electricity demand
by Sigauke, Caston & Bere, Alphonce
- 167-177 Genetic algorithm for optimization of energy systems: Solution uniqueness, accuracy, Pareto convergence and dimension reduction
by Ganjehkaviri, A. & Mohd Jaafar, M.N. & Hosseini, S.E. & Barzegaravval, H.
- 178-187 Analysis of energy consumption in three systems for collecting sugarcane straw for use in power generation
by Carvalho, Danilo José & Veiga, João Paulo Soto & Bizzo, Waldir Antonio
- 188-198 Second law analysis of novel working fluid pairs for waste heat recovery by the Kalina cycle
by Eller, Tim & Heberle, Florian & Brüggemann, Dieter
- 199-210 Combining effect of optimized axial compressor variable guide vanes and bleed air on the thermodynamic performance of aircraft engine system
by Kim, Sangjo & Son, Changmin & Kim, Kuisoon
- 211-217 New knowledge on the temperature-entropy saturation boundary slope of working fluids
by Su, Wen & Zhao, Li & Deng, Shuai
Printed from https://ideas.repec.org/s/eee/energy119.html
