IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v119y2017icp86-93.html
   My bibliography  Save this article

Influence of new adsorbents with isotherm Type V on performance of an adsorption heat pump

Author

Listed:
  • Gediz Ilis, Gamze

Abstract

The working pair is one of the main influencing parameter on performance of an adsorption heat pump (AHP). Researchers started to synthesize different adsorbents in order to improve the adsorption rate. Even the adsorption rate could seem very well, the new adsorbent could not be suitable for an AHP for given conditions. In this context, the effect of new adsorbent materials with isotherm Type V on adsorption-desorption processes of an unconsolidated adsorbent bed works for refrigeration are investigated. The adsorbate is taken as water. Type V isotherm equations for each adsorbent are predicted and the influence on the performance is analyzed. The constants in the equation that simulate the isotherm shape are found. The average temperature/concentration in the rectangular bed during the adsorption/desorption processes are plotted for different novel adsorbents; FAM-Z01, FAM-Z02, MIL101@GO5, and NH2-MIL-125(Ti). The performed numerical solutions for the case which is taken into account for this paper (evaporator temperature and bed heating temperature are 2 °C and 77.5 °C) showed that, MIL101(Cr)@GO5 has the best Specific Cooling Power for the volume of the bed which is 21.13 kJ/kga but has worst COP as 1.20. FAM-Z01 has 53.85 kJ/h evaporator capacity where this value is the best for the case.

Suggested Citation

  • Gediz Ilis, Gamze, 2017. "Influence of new adsorbents with isotherm Type V on performance of an adsorption heat pump," Energy, Elsevier, vol. 119(C), pages 86-93.
  • Handle: RePEc:eee:energy:v:119:y:2017:i:c:p:86-93
    DOI: 10.1016/j.energy.2016.12.053
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544216318576
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2016.12.053?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ma, Liejun & Yang, Huan & Wu, Qi & Yin, Yu & Liu, Zongjian & Cui, Qun & Wang, Haiyan, 2015. "Study on adsorption refrigeration performance of MIL-101-isobutane working pair," Energy, Elsevier, vol. 93(P1), pages 786-794.
    2. Girnik, Ilya S. & Aristov, Yuri I., 2016. "Dynamic optimization of adsorptive chillers: The “AQSOA™-FAM-Z02 – Water” working pair," Energy, Elsevier, vol. 106(C), pages 13-22.
    3. Gordeeva, Larisa G. & Solovyeva, Marina V. & Aristov, Yuri I., 2016. "NH2-MIL-125 as a promising material for adsorptive heat transformation and storage," Energy, Elsevier, vol. 100(C), pages 18-24.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Kohler, Tobias & Hinze, Moritz & Müller, Karsten & Schwieger, Wilhelm, 2017. "Temperature independent description of water adsorption on zeotypes showing a type V adsorption isotherm," Energy, Elsevier, vol. 135(C), pages 227-236.
    2. František Mikšík & Takahiko Miyazaki & Kyaw Thu, 2020. "Adsorption Isotherm Modelling of Water on Nano-Tailored Mesoporous Silica Based on Distribution Function," Energies, MDPI, vol. 13(16), pages 1-31, August.
    3. Dias, João M.S. & Costa, Vítor A.F., 2018. "Adsorption heat pumps for heating applications: A review of current state, literature gaps and development challenges," Renewable and Sustainable Energy Reviews, Elsevier, vol. 98(C), pages 317-327.
    4. Han, Bo & Chakraborty, Anutosh, 2024. "Recent advances in metal-organic frameworks for adsorption heat transformations," Renewable and Sustainable Energy Reviews, Elsevier, vol. 198(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Palomba, Valeria & Sapienza, Alessio & Aristov, Yuri, 2019. "Dynamics and useful heat of the discharge stage of adsorptive cycles for long term thermal storage," Applied Energy, Elsevier, vol. 248(C), pages 299-309.
    2. Piotr Boruta & Tomasz Bujok & Łukasz Mika & Karol Sztekler, 2021. "Adsorbents, Working Pairs and Coated Beds for Natural Refrigerants in Adsorption Chillers—State of the Art," Energies, MDPI, vol. 14(15), pages 1-41, August.
    3. Mitra, Sourav & Thu, Kyaw & Saha, Bidyut Baran & Dutta, Pradip, 2017. "Performance evaluation and determination of minimum desorption temperature of a two-stage air cooled silica gel/water adsorption system," Applied Energy, Elsevier, vol. 206(C), pages 507-518.
    4. Aristov, Yuri I., 2017. "Adsorptive transformation and storage of renewable heat: Review of current trends in adsorption dynamics," Renewable Energy, Elsevier, vol. 110(C), pages 105-114.
    5. Askalany, Ahmed A. & Ernst, Sebastian-Johannes & Hügenell, Philipp P.C. & Bart, Hans-Jörg & Henninger, Stefan K. & Alsaman, Ahmed S., 2017. "High potential of employing bentonite in adsorption cooling systems driven by low grade heat source temperatures," Energy, Elsevier, vol. 141(C), pages 782-791.
    6. Xu, Zhou & Yin, Yu & Shao, Junpeng & Liu, Yerong & Zhang, Lin & Cui, Qun & Wang, Haiyan, 2020. "Study on heat transfer and cooling performance of copper foams cured MIL-101 adsorption unit tube," Energy, Elsevier, vol. 191(C).
    7. Gordeeva, L.G. & Aristov, Yu.I., 2019. "Adsorptive heat storage and amplification: New cycles and adsorbents," Energy, Elsevier, vol. 167(C), pages 440-453.
    8. Mahesh, A., 2017. "Solar collectors and adsorption materials aspects of cooling system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 1300-1312.
    9. Gordeeva, Larisa G. & Solovyeva, Marina V. & Sapienza, Alessio & Aristov, Yuri I., 2020. "Potable water extraction from the atmosphere: Potential of MOFs," Renewable Energy, Elsevier, vol. 148(C), pages 72-80.
    10. Yinglai Hou & Zhizhi Sheng & Chen Fu & Jie Kong & Xuetong Zhang, 2022. "Hygroscopic holey graphene aerogel fibers enable highly efficient moisture capture, heat allocation and microwave absorption," Nature Communications, Nature, vol. 13(1), pages 1-12, December.
    11. Mohammadzadeh Kowsari, Milad & Niazmand, Hamid & Tokarev, Mikhail Mikhailovich, 2018. "Bed configuration effects on the finned flat-tube adsorption heat exchanger performance: Numerical modeling and experimental validation," Applied Energy, Elsevier, vol. 213(C), pages 540-554.
    12. Pinheiro, Joana M. & Salústio, Sérgio & Rocha, João & Valente, Anabela A. & Silva, Carlos M., 2020. "Adsorption heat pumps for heating applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 119(C).
    13. Grekova, A.D. & Girnik, I.S. & Nikulin, V.V. & Tokarev, M.M. & Gordeeva, L.G. & Aristov, Yu.I., 2016. "New composite sorbents of water and methanol “salt in anodic alumina”: Evaluation for adsorption heat transformation," Energy, Elsevier, vol. 106(C), pages 231-239.
    14. Tokarev, M.M. & Aristov, Yu.I., 2017. "A new version of the Large Temperature Jump method: The thermal response (T–LTJ)," Energy, Elsevier, vol. 140(P1), pages 481-487.
    15. Frangopoulos, Christos A., 2018. "Recent developments and trends in optimization of energy systems," Energy, Elsevier, vol. 164(C), pages 1011-1020.
    16. Ding, Zhixiong & Wu, Wei & Leung, Michael, 2021. "Advanced/hybrid thermal energy storage technology: material, cycle, system and perspective," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    17. Hui Yang & Chengcheng Wang & Lige Tong & Shaowu Yin & Li Wang & Yulong Ding, 2023. "Salt Hydrate Adsorption Material-Based Thermochemical Energy Storage for Space Heating Application: A Review," Energies, MDPI, vol. 16(6), pages 1-54, March.
    18. Andrea Frazzica & Vincenza Brancato & Belal Dawoud, 2020. "Unified Methodology to Identify the Potential Application of Seasonal Sorption Storage Technology," Energies, MDPI, vol. 13(5), pages 1-17, February.
    19. Girnik, Ilya S. & Aristov, Yuri I., 2016. "Dynamics of water vapour adsorption by a monolayer of loose AQSOA™-FAM-Z02 grains: Indication of inseparably coupled heat and mass transfer," Energy, Elsevier, vol. 114(C), pages 767-773.
    20. Yu Yin & Junpeng Shao & Lin Zhang & Qun Cui & Haiyan Wang, 2021. "Experimental Study on Heat Transfer and Adsorption Cooling Performance of MIL-101/Few Layer Graphene Composite," Energies, MDPI, vol. 14(16), pages 1-19, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:119:y:2017:i:c:p:86-93. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.