IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v121y2017icp545-560.html
   My bibliography  Save this article

A thermoelectric generator for scavenging gas-heat: From module optimization to prototype test

Author

Listed:
  • Cheng, Fuqiang
  • Hong, Yanji
  • Li, Weiping
  • Guo, Xiaohong
  • Zhang, Hailong
  • Fu, Feng
  • Feng, Bingqing
  • Wang, Gang
  • Wang, Chao
  • Qin, Haibing

Abstract

Scramjets of hypersonic vehicles feature huge heat flux inside which can be harvested by thermoelectric devices as auxiliary power source. As a preliminary study to support scramjet-based thermoelectric generation, some work focusing on enhancing output power of thermoelectric generators (TEGs) was undertaken. Firstly, brief rules to increase TEG output power were summarized by analyzing a one-dimensional physical model. And thermoelectric modules adopting polycrystalline Bi2Te3-based materials prepared by mechanical alloy method with spark plasma sintering were fabricated with the figure-of-merits up to 1.13 (p-type) and 1.02 (n-type). Then a measuring system was built to test output performance of the modules and mounting pressure for the modules was optimized. Based on the system, influences of structure parameters of the modules including thermoelement thickness and cross-area on the output power were tested and analyzed experimentally. Using hot flowing air with temperature up to nearly 740 K as the gaseous energy source, a gas-heat scavenging TEG prototype was assembled and cyclically tested. Output power of 72.6 W was achieved for the TEG prototype and the corresponding area-specific power was 0.378 W·cm−2 for the thermoelectric pile consisting of six pairs of the Bi2Te3-based modules. At last, net output power considering power consumption of the coolant pump of the TEG prototype was analyzed.

Suggested Citation

  • Cheng, Fuqiang & Hong, Yanji & Li, Weiping & Guo, Xiaohong & Zhang, Hailong & Fu, Feng & Feng, Bingqing & Wang, Gang & Wang, Chao & Qin, Haibing, 2017. "A thermoelectric generator for scavenging gas-heat: From module optimization to prototype test," Energy, Elsevier, vol. 121(C), pages 545-560.
    • Handle: RePEc:eee:energy:v:121:y:2017:i:c:p:545-560
    DOI: 10.1016/j.energy.2017.01.025
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544217300257
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2017.01.025?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Chenguang Fu & Shengqiang Bai & Yintu Liu & Yunshan Tang & Lidong Chen & Xinbing Zhao & Tiejun Zhu, 2015. "Realizing high figure of merit in heavy-band p-type half-Heusler thermoelectric materials," Nature Communications, Nature, vol. 6(1), pages 1-7, November.
    2. Wu, Yongjia & Zuo, Lei & Chen, Jie & Klein, Jackson A., 2016. "A model to analyze the device level performance of thermoelectric generator," Energy, Elsevier, vol. 115(P1), pages 591-603.
    3. Kim, Shiho, 2013. "Analysis and modeling of effective temperature differences and electrical parameters of thermoelectric generators," Applied Energy, Elsevier, vol. 102(C), pages 1458-1463.
    4. Shen, Zu-Guo & Wu, Shuang-Ying & Xiao, Lan & Yin, Gang, 2016. "Theoretical modeling of thermoelectric generator with particular emphasis on the effect of side surface heat transfer," Energy, Elsevier, vol. 95(C), pages 367-379.
    5. Georgopoulou, Chariklia A. & Dimopoulos, George G. & Kakalis, Nikolaos M.P., 2016. "A modular dynamic mathematical model of thermoelectric elements for marine applications," Energy, Elsevier, vol. 94(C), pages 13-28.
    6. Park, K. & Lee, G.W., 2013. "Fabrication and thermoelectric power of π-shaped Ca3Co4O9/CaMnO3 modules for renewable energy conversion," Energy, Elsevier, vol. 60(C), pages 87-93.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ge, Ya & He, Kui & Xiao, Liehui & Yuan, Wuzhi & Huang, Si-Min, 2022. "Geometric optimization for the thermoelectric generator with variable cross-section legs by coupling finite element method and optimization algorithm," Renewable Energy, Elsevier, vol. 183(C), pages 294-303.
    2. Nan, Bohang & Guo, Tao & Deng, Hao & Zhang, Guangbing & Shi, Ran & Xin, Jiakai & Tang, Chen & Xu, Guiying, 2024. "Output performance improvement for thermoelectric transistor with the consideration of the Thomson effect and geometry optimization," Applied Energy, Elsevier, vol. 357(C).
    3. Shen, Zu-Guo & Wu, Shuang-Ying & Xiao, Lan & Chen, Zu-Xiang, 2017. "Proposal and assessment of a solar thermoelectric generation system characterized by Fresnel lens, cavity receiver and heat pipe," Energy, Elsevier, vol. 141(C), pages 215-238.
    4. Wang, Z.H. & Ma, Y.J. & Tang, G.H. & Zhang, Hu & Ji, F. & Sheng, Q., 2023. "Integration of thermal insulation and thermoelectric conversion embedded with phase change materials," Energy, Elsevier, vol. 278(C).
    5. Cui, Y.J. & Wang, B.L. & Wang, K.F., 2021. "Energy conversion performance optimization and strength evaluation of a wearable thermoelectric generator made of a thermoelectric layer on a flexible substrate," Energy, Elsevier, vol. 229(C).
    6. Shittu, Samson & Li, Guiqiang & Zhao, Xudong & Ma, Xiaoli, 2020. "Review of thermoelectric geometry and structure optimization for performance enhancement," Applied Energy, Elsevier, vol. 268(C).
    7. He, Zhi-Zhu, 2020. "A coupled electrical-thermal impedance matching model for design optimization of thermoelectric generator," Applied Energy, Elsevier, vol. 269(C).
    8. Shittu, Samson & Li, Guiqiang & Tang, Xin & Zhao, Xudong & Ma, Xiaoli & Badiei, Ali, 2020. "Analysis of thermoelectric geometry in a concentrated photovoltaic-thermoelectric under varying weather conditions," Energy, Elsevier, vol. 202(C).
    9. Yin, Tao & Li, Zhen-Ming & Peng, Peng & Liu, Wei & Shao, Yu-Ying & He, Zhi-Zhu, 2021. "Performance analysis and design optimization of a compact thermoelectric generator with T-Shaped configuration," Energy, Elsevier, vol. 229(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kanimba, Eurydice & Pearson, Matthew & Sharp, Jeff & Stokes, David & Priya, Shashank & Tian, Zhiting, 2018. "A comprehensive model of a lead telluride thermoelectric generator," Energy, Elsevier, vol. 142(C), pages 813-821.
    2. Wu, Yongjia & Yang, Jihui & Chen, Shikui & Zuo, Lei, 2018. "Thermo-element geometry optimization for high thermoelectric efficiency," Energy, Elsevier, vol. 147(C), pages 672-680.
    3. Nour Eddine, A. & Chalet, D. & Faure, X. & Aixala, L. & Chessé, P., 2018. "Optimization and characterization of a thermoelectric generator prototype for marine engine application," Energy, Elsevier, vol. 143(C), pages 682-695.
    4. Lan, Yuncheng & Lu, Junhui & Wang, Suilin, 2023. "Study of the geometry and structure of a thermoelectric leg with variable material properties and side heat dissipation based on thermodynamic, economic, and environmental analysis," Energy, Elsevier, vol. 282(C).
    5. Lyudmyla Vikhor & Maxim Kotsur, 2023. "Evaluation of Efficiency for Miniscale Thermoelectric Converter under the Influence of Electrical and Thermal Resistance of Contacts," Energies, MDPI, vol. 16(10), pages 1-22, May.
    6. Zhu, Yuxiao & Newbrook, Daniel W. & Dai, Peng & de Groot, C.H. Kees & Huang, Ruomeng, 2022. "Artificial neural network enabled accurate geometrical design and optimisation of thermoelectric generator," Applied Energy, Elsevier, vol. 305(C).
    7. Weng, Zebin & Liu, Furong & Zhu, Wenchao & Li, Yang & Xie, Changjun & Deng, Jian & Huang, Liang, 2022. "Performance improvement of variable-angle annular thermoelectric generators considering different boundary conditions," Applied Energy, Elsevier, vol. 306(PA).
    8. He, Zhi-Zhu, 2020. "A coupled electrical-thermal impedance matching model for design optimization of thermoelectric generator," Applied Energy, Elsevier, vol. 269(C).
    9. Meng, Jing-Hui & Wang, Xiao-Dong & Zhang, Xin-Xin, 2013. "Transient modeling and dynamic characteristics of thermoelectric cooler," Applied Energy, Elsevier, vol. 108(C), pages 340-348.
    10. Tian, Hua & Sun, Xiuxiu & Jia, Qi & Liang, Xingyu & Shu, Gequn & Wang, Xu, 2015. "Comparison and parameter optimization of a segmented thermoelectric generator by using the high temperature exhaust of a diesel engine," Energy, Elsevier, vol. 84(C), pages 121-130.
    11. Sun, Yajing & Chen, Gang & Duan, Bo & Li, Guodong & Zhai, Pengcheng, 2019. "An annular thermoelectric couple analytical model by considering temperature-dependent material properties and Thomson effect," Energy, Elsevier, vol. 187(C).
    12. Pang, Dandan & Zhang, Aibing & Guo, Yage & Wu, Junfeng, 2023. "Energy harvesting analysis of wearable thermoelectric generators integrated with human skin," Energy, Elsevier, vol. 282(C).
    13. Sadeq Hooshmand Zaferani & Alireza Darebaghi & Soon-Jik Hong & Daryoosh Vashaee & Reza Ghomashchi, 2020. "Experimental Realization of Heavily p-doped Half-Heusler CoVSn Compound," Energies, MDPI, vol. 13(6), pages 1-11, March.
    14. Sargolzaeiaval, Yasaman & Ramesh, Viswanath Padmanabhan & Ozturk, Mehmet C., 2022. "A comprehensive analytical model for thermoelectric body heat harvesting incorporating the impact of human metabolism and physical activity," Applied Energy, Elsevier, vol. 324(C).
    15. Shen, Zu-Guo & Liu, Xun & Chen, Shuai & Wu, Shuang-Ying & Xiao, Lan & Chen, Zu-Xiang, 2018. "Theoretical analysis on a segmented annular thermoelectric generator," Energy, Elsevier, vol. 157(C), pages 297-313.
    16. Buchalik, Ryszard & Nowak, Grzegorz & Nowak, Iwona, 2021. "Mathematical model of a thermoelectric system based on steady- and rapid-state measurements," Applied Energy, Elsevier, vol. 293(C).
    17. Zhu, WenChao & Weng, Zebin & Li, Yang & Zhang, Leiqi & Zhao, Bo & Xie, Changjun & Shi, Ying & Huang, Liang & Yan, Yonggao, 2022. "Theoretical analysis of shape factor on performance of annular thermoelectric generators under different thermal boundary conditions," Energy, Elsevier, vol. 239(PD).
    18. Ma, Xiaonan & Shu, Gequn & Tian, Hua & Xu, Wen & Chen, Tianyu, 2019. "Performance assessment of engine exhaust-based segmented thermoelectric generators by length ratio optimization," Applied Energy, Elsevier, vol. 248(C), pages 614-625.
    19. F. P. Brito & João Silva Peixoto & Jorge Martins & António P. Gonçalves & Loucas Louca & Nikolaos Vlachos & Theodora Kyratsi, 2021. "Analysis and Design of a Silicide-Tetrahedrite Thermoelectric Generator Concept Suitable for Large-Scale Industrial Waste Heat Recovery," Energies, MDPI, vol. 14(18), pages 1-21, September.
    20. Harb, Abd El-Moneim A. & Elsayed, Khairy & Sedrak, Momtaz & Ahmed, Mahmoud & Abdo, Ahmed, 2024. "Enhancing the performance of thermoelectric generators using novel segmental arrangement of multi-functional gradient materials," Renewable Energy, Elsevier, vol. 225(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:121:y:2017:i:c:p:545-560. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.