Contact information of Elsevier
Serial Information
Download restrictions: Full text for ScienceDirect subscribers only
Series handle: RePEc:eee:energy
ISSN: 0360-5442
Citations RSS feed: at CitEc
Impact factors
Access and download statisticsTop item:
Corrections
All material on this site has been provided by the respective publishers and authors. You can help
correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy. See general information about how to correct material in RePEc.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .
Content
2017, Volume 140, Issue P1
- 1276-1291 Why do climate change scenarios return to coal?
by Ritchie, Justin & Dowlatabadi, Hadi
- 1292-1304 Hydrothermal carbonization, torrefaction and slow pyrolysis of Miscanthus giganteus
by Wilk, Małgorzata & Magdziarz, Aneta
- 1305-1315 CFD modeling and thermodynamic analysis of a concept of a MILD-OXY combustion large scale pulverized coal boiler
by Adamczyk, Wojciech P. & Bialecki, Ryszard A. & Ditaranto, Mario & Gladysz, Pawel & Haugen, Nils Erland L. & Katelbach-Wozniak, Anna & Klimanek, Adam & Sladek, Slawomir & Szlek, Andrzej & Wecel, Gabriel
- 1316-1325 The co-combustion of hard coal with raw and torrefied biomasses (willow (Salix viminalis), olive oil residue and waste wood from furniture manufacturing)
by Kopczyński, Marcin & Lasek, Janusz A. & Iluk, Andrzej & Zuwała, Jarosław
2017, Volume 139, Issue C
- 1-7 The freezing pre-treatment of lignocellulosic material: A cheap alternative for Nordic countries
by Rooni, Vahur & Raud, Merlin & Kikas, Timo
- 8-17 Enhanced hydrogen storage properties of ZrCo alloy decorated with flower-like Pd particles
by Wang, Feng & Li, Rongfeng & Ding, Cuiping & Tang, Wukui & Wang, Yibo & Xu, Shimeng & Yu, Ronghai & Wang, Zhongmin
- 18-30 Electricity load forecasting by an improved forecast engine for building level consumers
by Liu, Yang & Wang, Wei & Ghadimi, Noradin
- 31-41 Optimization based planning of urban energy systems: Retrofitting a Chinese industrial park as a case-study
by Zheng, Xuyue & Qiu, Yuwei & Zhan, Xiangyan & Zhu, Xingyi & Keirstead, James & Shah, Nilay & Zhao, Yingru
- 42-51 Comparative exergoeconomics of power utilities: Air-cooled gas turbine cycle and combined cycle configurations
by Sahu, Mithilesh Kumar & Sanjay,
- 52-64 High-efficiency concentrated solar power plants need appropriate materials for high-temperature heat capture, conveying and storage
by Zhang, Huili & Kong, Weibin & Tan, Tianwei & Baeyens, Jan
- 65-75 Entropy generation analysis for a circular tube with equilateral triangle cross sectioned coiled-wire inserts
by Keklikcioglu, Orhan & Ozceyhan, Veysel
- 76-88 Levelized electricity costing per carbon dioxide intensity of an organic Rankine cycle by using a water hyacinth-municipal solid waste fuel
by Intaniwet, Akarin & Chaiyat, Nattaporn
- 89-97 An efficient cost-reliability optimization model for optimal siting and sizing of energy storage system in a microgrid in the presence of responsible load management
by Nojavan, Sayyad & Majidi, Majid & Esfetanaj, Naser Nourani
- 98-117 Financial risks management of heat exchanger networks under uncertain utility costs via multi-objective optimization
by Pavão, Leandro V. & Pozo, Carlos & Costa, Caliane B.B. & Ravagnani, Mauro A.S.S. & Jiménez, Laureano
- 118-141 Compression ignition engine performance modelling using hybrid MCDM techniques for the selection of optimum fish oil biodiesel blend at different injection timings
by Sivaraja, C.M. & Sakthivel, G.
- 142-154 Novel validated method for GIS based automated dynamic urban building energy simulations
by Nageler, P. & Zahrer, G. & Heimrath, R. & Mach, T. & Mauthner, F. & Leusbrock, I. & Schranzhofer, H. & Hochenauer, C.
- 155-169 Performance analysis of solo Duck wave energy converter arrays under motion constraints
by Wu, Jinming & Yao, Yingxue & Zhou, Liang & Chen, Ni & Yu, Huifeng & Li, Wei & Göteman, Malin
- 170-183 Methodology to parametric design of cam profile for electronic unit pump
by Zhang, Zheng & Liu, Fushui & Wang, Pei & Hu, Ruo & Sun, Baigang
- 184-195 The role of decentralized systems in providing universal electricity access in Sub-Saharan Africa – A model-based approach
by Dagnachew, Anteneh G. & Lucas, Paul L. & Hof, Andries F. & Gernaat, David E.H.J. & de Boer, Harmen-Sytze & van Vuuren, Detlef P.
- 196-209 Effects of flow incidence on aerothermal performance of transonic blade tip clearance flows
by Gao, Jie & Zheng, Qun & Dong, Ping & Fu, Weiliang
- 210-219 A flexible thin-film membrane with broadband Ag@TiO2 nanoparticle for high-efficiency solar evaporation enhancement
by Li, Haoran & He, Yurong & Liu, Ziyu & Jiang, Baocheng & Huang, Yimin
- 220-230 Fair division of costs in green energy markets
by Hougaard, Jens Leth & Kronborg, Dorte & Smilgins, Aleksandrs
- 231-246 CSP plants with thermocline thermal energy storage and integrated steam generator – Techno-economic modeling and design optimization
by Pizzolato, A. & Donato, F. & Verda, V. & Santarelli, M. & Sciacovelli, A.
- 247-261 Multi-objective optimization of the combustion of a heavy-duty diesel engine with low temperature combustion (LTC) under a wide load range: (II) Detailed parametric, energy, and exergy analysis
by Xu, Guangfu & Jia, Ming & Li, Yaopeng & Xie, Maozhao & Su, Wanhua
- 262-276 Thermodynamic and thermoeconomic analysis and optimization of a novel combined cooling and power (CCP) cycle by integrating of ejector refrigeration and Kalina cycles
by Ghaebi, Hadi & Parikhani, Towhid & Rostamzadeh, Hadi & Farhang, Behzad
- 277-288 Modeling of membrane electrode assembly of PEM fuel cell to analyze voltage losses inside
by Hong, Po & Xu, Liangfei & Li, Jianqiu & Ouyang, Minggao
- 289-297 Dynamic modelling of local low-temperature heating grids: A case study for Norway
by Kauko, Hanne & Kvalsvik, Karoline Husevåg & Rohde, Daniel & Hafner, Armin & Nord, Natasa
- 298-314 Energy losses from the furnace chamber walls during heating and heat treatment of heavy forgings
by Hadała, Beata & Malinowski, Zbigniew & Rywotycki, Marcin
- 315-328 The application of household appliances' flexibility by set of sequential uninterruptible energy phases model in the day-ahead planning of a residential microgrid
by Mohseni, Amin & Mortazavi, Seyed Saeidollah & Ghasemi, Ahmad & Nahavandi, Ali & Talaei abdi, Masoud
- 329-340 Energy recovery in cooling water system by hydro turbines
by Ma, Jiaze & Wang, Yufei & Feng, Xiao
- 341-349 Environmental benefits analysis based on life cycle assessment of rice straw-based synthetic natural gas in China
by Feng, Fei & Song, Guohui & Shen, Laihong & Xiao, Jun
- 350-365 A shade dispersion interconnection scheme for partially shaded modules in a solar PV array network
by Satpathy, Priya Ranjan & Sharma, Renu & Jena, Sasmita
- 366-379 Dynamics of premixed CH4/air flames in a micro combustor with a plate flame holder and preheating channels
by Wan, Jianlong & Zhao, Haibo
- 380-393 Comparative study of Rankine cycle configurations utilizing LNG cold energy under different NG distribution pressures
by Sun, Zhixin & Xu, Fuquan & Wang, Shujia & Lai, Jianpeng & Lin, Kui
- 394-405 Energy efficiency-based course timetabling for university buildings
by Song, Kwonsik & Kim, Sooyoung & Park, Moonseo & Lee, Hyun-Soo
- 406-421 A framework for water and carbon footprint analysis of national electricity production scenarios
by Shaikh, Mohammad A. & Kucukvar, Murat & Onat, Nuri Cihat & Kirkil, Gokhan
- 422-432 Operational scheduling of electric vehicles parking lot integrated with renewable generation based on bilevel programming approach
by Aghajani, Saemeh & Kalantar, Mohsen
- 433-446 Are the off-grid customers ready to pay for electricity from the decentralized renewable hybrid mini-grids? A study of willingness to pay in rural Bangladesh
by Alam, Majbaul & Bhattacharyya, Subhes
- 447-458 Performance analysis on a high-temperature solar evacuated receiver with an inner radiation shield
by Wang, Qiliang & Li, Jing & Yang, Honglun & Su, Katy & Hu, Mingke & Pei, Gang
- 459-467 Impact of water characteristics on the bioenergy recovery from sewage treatment by anaerobic membrane bioreactor via a comprehensive study on the response of microbial community and methanogenic activity
by Nie, Yulun & Chen, Rong & Tian, Xike & Li, Yu-You
- 468-484 Renewable methane – A technology evaluation by multi-criteria decision making from a European perspective
by Billig, E. & Thraen, D.
- 485-506 Municipal waste management systems for domestic use
by Jouhara, H. & Czajczyńska, D. & Ghazal, H. & Krzyżyńska, R. & Anguilano, L. & Reynolds, A.J. & Spencer, N.
- 507-522 Life-cycle assessment of alternative liquid fuels production in China
by Zhou, Huairong & Qian, Yu & Kraslawski, Andrzej & Yang, Qingchun & Yang, Siyu
- 523-534 Comprehensive global optimization of an implicit constrained multi-physics system for electric vehicles with in-wheel motors
by Lei, Fei & Gu, Ke & Du, Bin & Xie, Xiaoping
- 535-541 A novel cathode gas diffusion layer for water management of passive μ-DMFC
by Xue, Rui & Zhang, Yufeng & Liu, Xiaowei
- 542-554 Comparative analysis of direct employment generated by renewable and non-renewable power plants
by Cartelle Barros, Juan José & Lara Coira, Manuel & de la Cruz López, María Pilar & del Caño Gochi, Alfredo
- 555-570 Comprehensive numerical study of the Adelaide Jet in Hot-Coflow burner by means of RANS and detailed chemistry
by Li, Zhiyi & Cuoci, Alberto & Sadiki, Amsini & Parente, Alessandro
- 571-579 Metabolic pathway analysis based on high-throughput sequencing in a batch biogas production process
by Tian, Guangliang & Zhang, Wudi & Dong, Minghua & Yang, Bin & Zhu, Rui & Yin, Fang & Zhao, Xingling & Wang, Yongxia & Xiao, Wei & Wang, Qiang & Cui, Xiaolong
- 580-593 Heat Roadmap Europe: Quantitative comparison between the electricity, heating, and cooling sectors for different European countries
by Connolly, D.
- 594-605 Nonlinear empirical pricing in electricity markets using fundamental weather factors
by Mosquera-López, Stephanía & Uribe, Jorge M. & Manotas-Duque, Diego Fernando
- 606-616 Environmental assessment of hydrogen production based on Pinus patula plantations in Colombia
by García, Carlos A. & Morales, Marjorie & Quintero, Julian & Aroca, Germán & Cardona, Carlos A.
- 617-629 Revisiting driving factors of oil price shocks across time scales
by Huang, Shupei & An, Haizhong & Wen, Shaobo & An, Feng
- 630-645 Supply chain optimization of forest biomass electricity and bioethanol coproduction
by Liu, Wan-Yu & Lin, Chun-Cheng & Yeh, Tzu-Lei
- 646-654 Energy audit of Iranian kiwifruit production using intelligent systems
by Soltanali, Hamzeh & Nikkhah, Amin & Rohani, Abbas
- 655-666 Optimisation of coal fineness in pulverised-fuel boilers
by Pronobis, Marek & Mroczek, Kazimierz & Tymoszuk, Mateusz & Ciukaj, Szymon & Wejkowski, Robert & Janda, Tomasz & Jagodzińska, Katarzyna
- 667-679 Impact of power station capacities and sizes of solar field on the performance of solar aided power generation
by Huang, Chang & Hou, Hongjuan & Hu, Eric & Liang, Mingyu & Yang, Yongping
- 680-693 Multi-objective energy management of a micro-grid considering uncertainty in wind power forecasting
by Sarshar, Javad & Moosapour, Seyyed Sajjad & Joorabian, Mahmood
- 694-705 Exergy analysis and optimization of coking process
by Liu, Changxin & Xie, Zhihui & Sun, Fengrui & Chen, Lingen
- 706-731 Offshore wind resource assessment and wind power plant optimization in the Gulf of Thailand
by Chancham, Chana & Waewsak, Jompob & Gagnon, Yves
- 732-742 Co-gasification of woody biomass and chicken manure: Syngas production, biochar reutilization, and cost-benefit analysis
by Ng, Wei Cheng & You, Siming & Ling, Ran & Gin, Karina Yew-Hoong & Dai, Yanjun & Wang, Chi-Hwa
- 743-754 Energy efficiency and energy prices: A general mathematical framework
by Buus, Tomáš
- 755-766 Combined cooling heating and power systems: Sustainability assessment under uncertainties
by He, Chao & Zhang, Quanguo & Ren, Jingzheng & Li, Zhaoling
- 767-781 Factor analysis and optimization of operational parameters in a liquid desiccant air-conditioning system
by Tu, Min & Huang, Hui & Liu, Ze-Hua & Chen, Huan-Xin & Ren, Cheng-Qin & Chen, Guo-Jie & Hu, Yan
- 782-797 Transient response simulation of a passive sensible heat storage system and the comparison to a conventional active indirect two-tank unit
by Zaversky, Fritz & Pérez de Zabalza Asiain, Javier & Sánchez, Marcelino
- 798-817 An efficient linear model for optimal day ahead scheduling of CHP units in active distribution networks considering load commitment programs
by Kia, Mohsen & Setayesh Nazar, Mehrdad & Sepasian, Mohammad Sadegh & Heidari, Alireza & Siano, Pierluigi
- 818-827 Study of reactivity reduction in sugarcane bagasse as consequence of a torrefaction process
by Granados, D.A. & Ruiz, R.A. & Vega, L.Y. & Chejne, F.
- 828-841 Effect of exhaust gas recirculation, fuel injection pressure and injection timing on the performance of common rail direct injection engine powered with honge biodiesel (BHO)
by Khandal, S.V. & Banapurmath, N.R. & Gaitonde, V.N.
- 842-852 Influence of operational parameters on the performance of gas clean-up technology with a moving granular bed filter
by Chen, Yi-Shun & Hsiau, Shu-San & Hsu, Chia-Jen & Ma, Sheng-Ming & Chang, Yi-Lun
- 853-861 An experimental study of the burning characteristics of acetone–butanol–ethanol and diesel blend droplets
by Han, Kai & Pang, Bo & Ma, Xiaokang & Chen, Hao & Song, Guoqian & Ni, Zhaojing
- 862-870 Application of response surface methodology to determine effects of operational conditions on in-bed combustion fraction in vortexing fluidized-bed combustor using different fuels
by Cao, Songshan & Duan, Feng & Zhang, Lihui & Chyang, ChienSong & Yang, ChihYun
- 871-882 Modified exergoeconomic modeling and analysis of combined cooling heating and power system integrated with biomass-steam gasification
by Wang, Jiangjiang & Mao, Tianzhi & Wu, Jing
- 883-894 Comparative assessment of performance and emission characteristics of castor, coconut and waste cooking based biodiesel as fuel in a diesel engine
by Zareh, Parvaneh & Zare, Ali Asghar & Ghobadian, Barat
- 895-915 Optimal design of energy conversion units for residential buildings considering German market conditions
by Schütz, Thomas & Schraven, Markus Hans & Remy, Sebastian & Granacher, Julia & Kemetmüller, Dominik & Fuchs, Marcus & Müller, Dirk
- 916-934 Mathematical modelling and optimization of a liquid separation condenser-based organic Rankine cycle used in waste heat utilization
by Yi, Zhitong & Luo, Xianglong & Chen, Jianyong & Chen, Ying
- 935-946 Sequencing the features to minimise the non-cutting energy consumption in machining considering the change of spindle rotation speed
by Hu, Luoke & Liu, Ying & Lohse, Niels & Tang, Renzhong & Lv, Jingxiang & Peng, Chen & Evans, Steve
- 947-961 The development of China's biomass power industry under feed-in tariff and renewable portfolio standard: A system dynamics analysis
by Yu-zhuo, Zhang & Xin-gang, Zhao & Ling-zhi, Ren & Ji, Liang & Ping-kuo, Liu
- 962-974 Synchronized nutrient stress conditions trigger the diversion of CDP-DG pathway of phospholipids synthesis towards de novo TAG synthesis in oleaginous yeast escalating biodiesel production
by Patel, Alok & Pruthi, Vikas & Pruthi, Parul A.
- 975-990 The impacts of oil price shocks on small oil-importing economies: Time series evidence for Liberia
by Gbatu, Abimelech Paye & Wang, Zhen & Wesseh, Presley K. & Tutdel, Isaac Yak Repha
- 991-1002 Integrated collector storage solar water heater under partial vacuum
by Souliotis, Manolis & Papaefthimiou, Spiros & Caouris, Yiannis G. & Zacharopoulos, Aggelos & Quinlan, Patrick & Smyth, Mervyn
- 1003-1015 Displacement ventilation with cooled liquid desiccant dehumidification membrane at ceiling; modeling and design charts
by Hout, Mohamad & Ghaddar, Nesreen & Ghali, Kamel & Ismail, Nagham & Simonetti, Marco & Fracastoro, Gian Vincenzo & Virgone, Joseph & Zoughaib, Assaad
- 1016-1029 Simulation of airflow and particle deposition settled over a tilted Photovoltaic module
by Heydarabadi, Hoda & Abdolzadeh, Morteza & Lari, Khosro
- 1030-1039 Technical and economic feasibility of the Isopropanol-Acetone-Hydrogen chemical heat pump based on a lab-scale prototype
by Xu, Min & Cai, Jun & Guo, Jiangfeng & Huai, Xiulan & Liu, Zhigang & Zhang, Hang
- 1040-1051 Feasibility comparison of bioenergy and CO2 capture and storage in a large combined heat, power and cooling system
by Tsupari, Eemeli & Arponen, Timo & Hankalin, Ville & Kärki, Janne & Kouri, Sampo
- 1052-1065 Optimal design, operation and analytical criteria for determining optimal operating modes of a CCHP with fired HRSG, boiler, electric chiller and absorption chiller
by Afzali, Sayyed Faridoddin & Mahalec, Vladimir
- 1066-1079 Nonlinear multi-objective optimization model for a biomass direct-fired power generation supply chain using a case study in China
by Tan, Qinliang & Wang, Tingran & Zhang, Yimei & Miao, Xinyan & Zhu, Jun
- 1080-1093 Entropy generation of two-layer magnetohydrodynamic electroosmotic flow through microparallel channels
by Xie, Zhi-Yong & Jian, Yong-Jun
- 1094-1110 CO2 injection-induced fracturing in naturally fractured shale rocks
by Wang, Lei & Yao, Bowen & Xie, Haojun & Winterfeld, Philip H. & Kneafsey, Timothy J. & Yin, Xiaolong & Wu, Yu-Shu
- 1111-1125 An experimental evaluation of direct flow evacuated tube solar collector integrated with phase change material
by Abokersh, Mohamed Hany & El-Morsi, Mohamed & Sharaf, Osama & Abdelrahman, Wael
- 1126-1143 Sliding mode observer based nonlinear control of a PEMFC integrated with a methanol reformer
by Sankar, K. & Thakre, Niraj & Singh, Sumit Mohan & Jana, Amiya K.
- 1153-1158 Vertically-aligned Co3O4 nanowires interconnected with Co(OH)2 nanosheets as supercapacitor electrode
by Mei, Junfeng & Fu, Wenbin & Zhang, Zemin & Jiang, Xiao & Bu, Han & Jiang, Changjun & Xie, Erqing & Han, Weihua
- 1159-1172 Optimization of an integrated algae-based biorefinery for the production of biodiesel, astaxanthin and PHB
by García Prieto, Carla V. & Ramos, Fernando D. & Estrada, Vanina & Villar, Marcelo A. & Diaz, M. Soledad
- 1173-1187 Techno-economic and environmental assessment of stationary electricity storage technologies for different time scales
by Abdon, Andreas & Zhang, Xiaojin & Parra, David & Patel, Martin K. & Bauer, Christian & Worlitschek, Jörg
- 1188-1196 Immobilized mixed-culture reactor (IMcR) for hydrogen and methane production from glucose
by Satar, Ibdal & Daud, Wan Ramli Wan & Kim, Byung Hong & Somalu, Mahendra Rao & Ghasemi, Mostafa
- 1197-1209 Optimization of the geometry and the turbine induced damping for fixed detached and asymmetric OWC devices: A numerical study
by Simonetti, I. & Cappietti, L. & Elsafti, H. & Oumeraci, H.
- 1210-1230 Heat pipe based municipal waste treatment unit for home energy recovery
by Jouhara, H. & Nannou, T.K. & Anguilano, L. & Ghazal, H. & Spencer, N.
- 1231-1236 Assessment of silver nanowires infused with zinc oxide as a transparent electrode for dye-sensitized solar cell applications
by Alami, Abdul Hai & Rajab, Bilal & Aokal, Kamilia
- 1237-1242 Parametric study on some combustion characteristics in a natural gas fueled dual plug SI engine
by Altın, İsmail & Bilgin, Atilla & Çeper, Bilge Albayrak
- 1243-1260 Performance evaluation of a multi-pass air-to-water thermosyphon-based heat exchanger
by Mroue, H. & Ramos, J.B. & Wrobel, L.C. & Jouhara, H.
- 1261-1266 Power quality experimental analysis of grid-connected photovoltaic systems in urban distribution networks
by Seme, Sebastijan & Lukač, Niko & Štumberger, Bojan & Hadžiselimović, Miralem
- 1267-1274 Dual-axis photovoltaic tracking system – Design and experimental investigation
by Seme, Sebastijan & Srpčič, Gregor & Kavšek, Domen & Božičnik, Stane & Letnik, Tomislav & Praunseis, Zdravko & Štumberger, Bojan & Hadžiselimović, Miralem
- 1275-1280 An energy prediction algorithm for wind-powered wireless sensor networks with energy harvesting
by Kosunalp, Selahattin
2017, Volume 138, Issue C
- 1-11 A modified ammonia-water power cycle using a distillation stage for more efficient power generation
by Chen, X. & Wang, R.Z. & Wang, L.W. & Du, S.
- 12-18 Energy and exergy analysis of adiabatic compressed air energy storage system
by Szablowski, Lukasz & Krawczyk, Piotr & Badyda, Krzysztof & Karellas, Sotirios & Kakaras, Emmanuel & Bujalski, Wojciech
- 19-31 Multi-objective demand response to real-time prices (RTP) using a task scheduling methodology
by Cortés-Arcos, Tomás & Bernal-Agustín, José L. & Dufo-López, Rodolfo & Lujano-Rojas, Juan M. & Contreras, Javier
- 32-47 Effect of a real steam turbine on thermoeconomic analysis of combined cycle power plants
by Carcasci, Carlo & Cosi, Lorenzo & Ferraro, Riccardo & Pacifici, Beniamino
- 48-59 Co-liquefaction of whole Jatropha curcas seed and glycerol using deep eutectic solvents as catalysts
by Alhassan, Y. & Pali, H.S. & Kumar, N. & Bugaje, I.M.
- 60-78 Primary energy evaluation of heat pumps considering dynamic boundary conditions in the energy system
by Stinner, Sebastian & Schlösser, Tim & Huchtemann, Kristian & Müller, Dirk & Monti, Antonello
- 79-91 Estimation of technical and economic potential of offshore wind along the coast of India
by Nagababu, Garlapati & Kachhwaha, Surendra Singh & Savsani, Vimal
- 92-102 Simultaneous coordination of distinct plug-in Hybrid Electric Vehicle charging stations: A modified Particle Swarm Optimization approach
by Suganya, S. & Raja, S. Charles & Venkatesh, P.
- 103-117 Performances of grooved plates falling film absorber
by Michel, Benoit & Le Pierrès, Nolwenn & Stutz, Benoit
- 118-132 A unified modeling framework for lithium-ion batteries: An artificial neural network based thermal coupled equivalent circuit model approach
by Wang, Qian-Kun & He, Yi-Jun & Shen, Jia-Ni & Ma, Zi-Feng & Zhong, Guo-Bin
- 133-138 An energy-efficient method for direct-contact ultrasonic cloth drying
by Peng, Chang & Momen, Ayyoub M. & Moghaddam, Saeed
- 139-146 The effect of floor insulation on indoor air temperature and energy consumption of residential buildings in moderate climates
by Staszczuk, Anna & Wojciech, Magdalena & Kuczyński, Tadeusz
- 147-156 Open-cell foams for thermoacoustic applications
by Napolitano, Marialuisa & Romano, Rosario & Dragonetti, Raffaele
- 157-166 Fabrication and characterization of novel shape-stabilized synergistic phase change materials based on PHDA/GO composites
by Cao, Rui-rui & Li, Xuan & Chen, Sai & Yuan, Hao-ran & Zhang, Xing-xiang
- 167-184 Dominant flow structure in the squealer tip gap and its impact on turbine aerodynamic performance
by Zou, Zhengping & Shao, Fei & Li, Yiran & Zhang, Weihao & Berglund, Albin
- 185-196 A scenario based approach to designing electricity grids with high variable renewable energy penetrations in Ontario, Canada: Development and application of the SILVER model
by McPherson, Madeleine & Karney, Bryan
- 197-209 Experimental investigation of autoignition of hydrogen-air charge in a compression ignition engine under dual-fuel mode
by Chintala, V. & Subramanian, K.A.
- 210-227 Mathematical modeling and evolutionary generation of rule sets for energy-efficient flexible job shops
by Zhang, Liping & Tang, Qiuhua & Wu, Zhengjia & Wang, Fang
- 228-237 Comparison between Fanger's thermal comfort model and human exergy loss
by Prek, Matjaž & Butala, Vincenc
- 238-248 Improving energy and environmental performance of coal fuelled boilers – A new type of centrifugal dust separator with external flue recycle
by Kubica, R. & Mokrosz, W. & Szlęk, A.
- 249-256 Modeling the operation of a thermoacoustic engine
by Rogoziński, Krzysztof & Nowak, Iwona & Nowak, Grzegorz
- 257-289 A critical review on the simulations of wind turbine aerodynamics focusing on hybrid RANS-LES methods
by Thé, Jesse & Yu, Hesheng
- 290-305 Semi-analytical model for a geothermal system considering the effect of areal flow between dipole wells on heat extraction
by Wu, Bisheng & Zhang, Guangqing & Zhang, Xi & Jeffrey, Robert G. & Kear, James & Zhao, Tongtiegang
- 306-315 Model-based predictive maintenance in building automation systems with user discomfort
by Cauchi, Nathalie & Macek, Karel & Abate, Alessandro
- 316-331 Modelling and simulation of an alkaline electrolyser cell
by Abdin, Z. & Webb, C.J. & Gray, E.MacA.
- 332-347 A tool for assessing the energy demand and efficiency of machining systems: Energy benchmarking
by Cai, Wei & Liu, Fei & Xie, Jun & Liu, Peiji & Tuo, Junbo
- 348-354 Process modeling and optimization for torrefaction of forest residues
by Bach, Quang-Vu & Skreiberg, Øyvind & Lee, Chul-Jin
- 355-373 A hybrid evolutionary algorithm for secure multi-objective distribution feeder reconfiguration
by Azizivahed, Ali & Narimani, Hossein & Naderi, Ehsan & Fathi, Mehdi & Narimani, Mohammad Rasoul
- 375-382 Hydrogenation improvement of TiFe by adding ZrMn2
by Lv, Peng & Huot, Jacques
- 383-393 Turbulent diffusion flames of a low-calorific value syngas under varying turbulator angles
by Ilbas, Mustafa & Karyeyen, Serhat
- 394-404 Application of imputation techniques and Adaptive Neuro-Fuzzy Inference System to predict wind turbine power production
by Morshedizadeh, Majid & Kordestani, Mojtaba & Carriveau, Rupp & Ting, David S.-K. & Saif, Mehrdad
- 405-418 New district heating system based on natural gas-fired boilers with absorption heat exchangers
by Sun, Fangtian & Zhao, Jinzi & Fu, Lin & Sun, Jian & Zhang, Shigang
- 419-436 Performance and cost evaluation of an innovative Pumped Thermal Electricity Storage power system
by Benato, Alberto
- 437-445 Modeling and performance evaluation of PEM fuel cell by controlling its input parameters
by Chavan, Sudarshan L. & Talange, Dhananjay B.
- 446-458 Optimum parameter design for performance of methanol steam reformer combining Taguchi method with artificial neural network and genetic algorithm
by Ouyang, Kwan & Wu, Horng-Wen & Huang, Shun-Chieh & Wu, Sheng-Ju
- 459-472 Assessment of off-design performance of a Kalina cycle driven by low-grade heat source
by Wang, Jianyong & Wang, Jiangfeng & Dai, Yiping & Zhao, Pan
- 473-479 Estimation of biomass higher heating value (HHV) based on the proximate analysis by using iterative neural network-adapted partial least squares (INNPLS)
by Hosseinpour, Soleiman & Aghbashlo, Mortaza & Tabatabaei, Meisam & Mehrpooya, Mehdi
- 480-489 Investigating the consistency and quality of EPC ratings and assessments
by Jenkins, David & Simpson, Sophie & Peacock, Andrew
- 490-499 Thermoeconomic investigation of power utilities: Intercooled recuperated gas turbine cycle featuring cooled turbine blades
by Sahu, Mithilesh Kumar & Sanjay,
- 500-508 A comparative analysis of wave power in the nearshore by WAM estimates and in-situ (AWAC) measurements. The case study of Varkiza, Athens, Greece
by Foteinis, S. & Hancock, J. & Mazarakis, N. & Tsoutsos, T. & Synolakis, C.E.
- 509-519 Implementation of reduced-order physics-based model and multi-parameters identification strategy for lithium-ion battery
by Deng, Zhongwei & Deng, Hao & Yang, Lin & Cai, Yishan & Zhao, Xiaowei
- 520-528 Advanced control strategy on battery storage system for energy management and bidirectional power control in electrical networks
by Hemmati, Reza & Azizi, Neda
- 529-541 Novel shortcut optimization model for regenerative steam power plant
by Wang, Maojian & Liu, Guilian & Hui, Chi Wai
- 542-551 A high efficient semi-open system for fresh water production from atmosphere
by Wang, J.Y. & Wang, R.Z. & Wang, L.W. & Liu, J.Y.
- 552-562 Performance and reduction potential of energy and CO2 emissions among the APEC's members with considering the return to scale
by Wang, Zhaohua & He, Weijun & Wang, Bo
- 563-574 Managing technology performance risk in the strategic design of biomass-based supply chains for energy in the transport sector
by d'Amore, Federico & Bezzo, Fabrizio
- 575-589 The effects of variable renewable electricity on energy efficiency and full load hours of fossil-fired power plants in the European Union
by de Groot, Mats & Crijns-Graus, Wina & Harmsen, Robert
- 590-601 Experimental analysis of a coiled stirred tank containing a low cost PCM emulsion as a thermal energy storage system
by Delgado, M. & Lázaro, A. & Mazo, J. & Peñalosa, C. & Marín, J.M. & Zalba, B.
- 602-615 Selection of energy conservation projects through Financial Pinch Analysis
by Roychaudhuri, Pritam Sankar & Kazantzi, Vasiliki & Foo, Dominic C.Y. & Tan, Raymond R. & Bandyopadhyay, Santanu
- 616-628 Critical analysis of the energy performance indicators for road lighting systems in historical towns of central Italy
by Leccese, Francesco & Salvadori, Giacomo & Rocca, Michele
- 629-646 An assessment of Spain's new alternative energy support framework and its long-term impact on wind power development and system costs through behavioral dynamic simulation
by Ibanez-Lopez, A.S. & Moratilla-Soria, B.Y.
- 647-658 Landfill gas-powered atmospheric water harvesting for oilfield operations in the United States
by Wikramanayake, Enakshi D. & Ozkan, Onur & Bahadur, Vaibhav
- 659-667 Effects of high-pressure anaerobic digestion up to 30 bar on pH-value, production kinetics and specific methane yield
by Lemmer, Andreas & Merkle, Wolfgang & Baer, Katharina & Graf, Frank
- 668-681 Solar thermal modeling for rapid estimation of auxiliary energy requirements in domestic hot water production: Proportional flow rate control
by Araújo, António & Pereira, Vítor
- 682-695 Experimental investigation of the effects of using metal-oxides/water nanofluids on a photovoltaic thermal system (PVT) from energy and exergy viewpoints
by Sardarabadi, Mohammad & Hosseinzadeh, Mohammad & Kazemian, Arash & Passandideh-Fard, Mohammad
- 696-705 Durability investigation and performance study of hydrothermal synthesized platinum-multi walled carbon nanotube nanocomposite catalyst for proton exchange membrane fuel cell
by Mirzaei, Farokh & Parnian, Mohammad Javad & Rowshanzamir, Soosan
- 706-720 Design and optimization of a novel cryogenic Rankine power generation system employing binary and ternary mixtures as working fluids based on the cold exergy utilization of liquefied natural gas (LNG)
by Xue, Feier & Chen, Yu & Ju, Yonglin
- 721-727 Analyzing the effects of real income and biomass energy consumption on carbon dioxide (CO2) emissions: Empirical evidence from the panel of biomass-consuming countries
by Dogan, Eyup & Inglesi-Lotz, Roula
- 728-738 Modeling and analysis of short-period transient response of a single, planar, anode supported, solid oxide fuel cell during load variations
by Nerat, Marko
- 739-751 Entransy dissipation-based thermal resistance optimization of slab LHTES system with multiple PCMs arranged in a 2D array
by Wang, Huiru & Liu, Zhenyu & Wu, Huiying
- 752-763 Experimental characterization and comparison of performance parameters of S-rotors for standalone wind power system
by Bhayo, Bilawal A. & Al-Kayiem, Hussain H.
- 764-775 State of charge estimation of lithium-ion batteries using a grey extended Kalman filter and a novel open-circuit voltage model
by Pan, Haihong & Lü, Zhiqiang & Lin, Weilong & Li, Junzi & Chen, Lin
- 776-784 Reusable nitrogen-doped mesoporous carbon adsorbent for carbon dioxide adsorption in fixed-bed
by Yaumi, A.L. & Bakar, M.Z. Abu & Hameed, B.H.
- 785-798 Utilization of Menteş iron ore as oxygen carrier in Chemical-Looping Combustion
by Dilmaç, Nesibe & Dilmaç, Ömer Faruk & Yardımcı, Esra
- 799-815 Demand side management approach to rural electrification of different climate zones in Indian state of Tamil Nadu
by Vishnupriyan, J. & Manoharan, P.S.
- 816-830 A novel wind speed estimator-integrated pitch control method for wind turbines with global-power regulation
by Song, Dongran & Yang, Jian & Su, Mei & Liu, Anfeng & Cai, Zili & Liu, Yao & Joo, Young Hoon
- 831-845 Investment in the energy sector: An optimization model that contemplates several uncertain parameters
by Cunico, Maria Laura & Flores, Julio Rolando & Vecchietti, Aldo
- 846-860 Energy use implications of different design strategies for multi-storey residential buildings under future climates
by Tettey, Uniben Yao Ayikoe & Dodoo, Ambrose & Gustavsson, Leif
- 861-872 Economic dispatch of multiple energy carriers
by Beigvand, Soheil Derafshi & Abdi, Hamdi & La Scala, Massimo
- 873-882 Synthesis and study of metal-based oxygen carriers (Cu, Co, Fe, Ni) and their interaction with supported metal oxides (Al2O3, CeO2, TiO2, ZrO2) in a chemical looping combustion system
by Tijani, Mansour Mohammedramadan & Aqsha, Aqsha & Mahinpey, Nader
- 883-889 Magnetic conductive polymer-graphene nanocomposites based supercapacitors for energy storage
by Yanik, Mahir Ozan & Yigit, Ekrem Akif & Akansu, Yahya Erkan & Sahmetlioglu, Ertugrul
- 890-901 Integrated energy security assessment
by Augutis, Juozas & Krikštolaitis, Ričardas & Martišauskas, Linas & Pečiulytė, Sigita & Žutautaitė, Inga
- 902-909 Estimating the maximum energy-saving potential based on IT load and IT load shifting
by Zhu, Kai & Cui, Zhuo & Wang, Yabo & Li, Hailong & Zhang, Xiaojing & Franke, Carsten
- 910-919 An integrated approach for the installation of a wave farm
by Arean, N. & Carballo, R. & Iglesias, G.
- 920-928 An exergy-based study on the relationship between costs and environmental impacts in power plants
by Lara, Yolanda & Petrakopoulou, Fontina & Morosuk, Tatiana & Boyano, Alicia & Tsatsaronis, George
- 929-941 Experimental investigation on the heat transfer performance of a latent thermal energy storage device based on flat miniature heat pipe arrays
by Diao, Yanhua & Kang, Yameng & Liang, Lin & Zhao, Yaohua & Zhu, Tingting
- 942-953 Exergy assessment of a rotary kiln-electric furnace smelting of ferronickel alloy
by Rong, W. & Li, B. & Liu, P. & Qi, F.
- 954-966 A general model for the optimization of energy supply systems of buildings
by Iturriaga, E. & Aldasoro, U. & Campos-Celador, A. & Sala, J.M.
- 967-976 Wind speed description and power density in northern Spain
by Herrero-Novoa, Cristina & Pérez, Isidro A. & Sánchez, M. Luisa & García, Ma Ángeles & Pardo, Nuria & Fernández-Duque, Beatriz
- 977-990 A new chaotic time series hybrid prediction method of wind power based on EEMD-SE and full-parameters continued fraction
by Wang, Cong & Zhang, Hongli & Fan, Wenhui & Ma, Ping
- 991-1005 Co-optimized trading of wind-thermal-pumped storage system in energy and regulation markets
by Al-Swaiti, Mustafa S. & Al-Awami, Ali T. & Khalid, Mohammad Waqas
- 1006-1015 New framework for optimal scheduling of combined heat and power with electric and thermal storage systems considering industrial customers inter-zonal power exchanges
by Kia, Mohsen & Setayesh Nazar, Mehrdad & Sepasian, Mohammad Sadegh & Heidari, Alireza & Catalão, João P.S.
- 1016-1029 Semi-industrial continuous band microwave dryer for energy and exergy analyses, mathematical modeling of paddy drying and it's qualitative study
by Jafari, Hassan & Kalantari, Davood & Azadbakht, Mohsen
- 1030-1041 From technology pathways to policy roadmaps to enabling measures – A multi-model approach
by Mulholland, E. & Rogan, F. & Ó Gallachóir, B.P.
- 1042-1055 Risk assessment of power transmission network failures in a uniform pricing electricity market environment
by Abdin, Islam & Li, Yan-Fu & Zio, Enrico
- 1056-1068 Parametric study on the distribution of flow rate and heat sink utilization in cooling channels of advanced aero-engines
by Jiang, Yuguang & Xu, Yaxing & Zhang, Silong & Chetehouna, Khaled & Gascoin, Nicolas & Qin, Jiang & Bao, Wen
- 1069-1080 Cryogenics-based energy storage: Evaluation of cold exergy recovery cycles
by Hamdy, Sarah & Morosuk, Tatiana & Tsatsaronis, George
- 1081-1098 Therblig-embedded value stream mapping method for lean energy machining
by Jia, Shun & Yuan, Qinghe & Lv, Jingxiang & Liu, Ying & Ren, Dawei & Zhang, Zhongwei
- 1099-1111 Environmental impacts of PV technology throughout the life cycle: Importance of the end-of-life management for Si-panels and CdTe-panels
by Vellini, Michela & Gambini, Marco & Prattella, Valentina
- 1112-1123 Surrogate worth trade-off method for multi-objective thermal power load dispatch
by Singh, Nirbhow Jap & Dhillon, J.S. & Kothari, D.P.
- 1124-1147 Joint train scheduling optimization with service quality and energy efficiency in urban rail transit networks
by Huang, Yeran & Yang, Lixing & Tang, Tao & Gao, Ziyou & Cao, Fang
- 1148-1156 Analytic modeling of parabolic trough solar thermal power plants
by Salazar, Germán A. & Fraidenraich, Naum & de Oliveira, Carlos Antonio Alves & de Castro Vilela, Olga & Hongn, Marcos & Gordon, Jeffrey M.
- 1157-1174 Costs and impacts of potential energy strategies for rural households in developing communities
by MacCarty, Nordica A. & Bryden, Kenneth Mark
- 1175-1186 Degradation prediction of PEM fuel cell using a moving window based hybrid prognostic approach
by Zhou, Daming & Gao, Fei & Breaz, Elena & Ravey, Alexandre & Miraoui, Abdellatif
- 1187-1198 Investigation of the effect of aluminum porous fins on heat transfer
by Bilen, K. & Gok, S. & Olcay, A.B. & Solmus, I.
- 1199-1208 Practical failure recognition model of lithium-ion batteries based on partial charging process
by Chen, Kunlong & Zheng, Fangdan & Jiang, Jiuchun & Zhang, Weige & Jiang, Yan & Chen, Kunjin
- 1209-1220 Sustainable urban heat strategies: Perspectives from integrated district energy choices and energy conservation in buildings. Case studies in Torino and Stockholm
by Delmastro, C. & Martinsson, F. & Dulac, J. & Corgnati, S.P.
Printed from https://ideas.repec.org/s/eee/energy113.html
