IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v139y2017icp298-314.html
   My bibliography  Save this article

Energy losses from the furnace chamber walls during heating and heat treatment of heavy forgings

Author

Listed:
  • Hadała, Beata
  • Malinowski, Zbigniew
  • Rywotycki, Marcin

Abstract

The boundary condition models at the inner and outer surface of the furnace wall have been developed taking into account heat transfer due to radiation and convection. The furnace wall temperature has been calculated from the finite element solution to the transient heat conduction equation. The boundary condition model has been validated using measurements on the laboratory furnace. The heat losses from the chamber walls have been calculated for selected wall structures and modes of the furnace operation. The results of computations have shown essential differences in the energy losses. It has been shown that the total heat losses depend on the chamber wall insulation and on the furnace operation mode for the most types of insulations. The best insulation effect has given the chamber wall made of the two types of the mineral fiber slabs. For this wall the total energy losses below 100 MJ/m2 has been obtained over 8 days of the furnace operation. Further, low sensitivity to the furnace operation mode has been noticed. This wall insulation can be utilized for heating ingots to the high temperatures and for the heat treatment processes characterized by a long time of the furnace operation.

Suggested Citation

  • Hadała, Beata & Malinowski, Zbigniew & Rywotycki, Marcin, 2017. "Energy losses from the furnace chamber walls during heating and heat treatment of heavy forgings," Energy, Elsevier, vol. 139(C), pages 298-314.
    • Handle: RePEc:eee:energy:v:139:y:2017:i:c:p:298-314
    DOI: 10.1016/j.energy.2017.07.121
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544217312951
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2017.07.121?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Rusinowski, Henryk & Szega, Marcin, 2001. "The influence of the operational parameters of chamber furnaces on the consumption of the chemical energy of fuels," Energy, Elsevier, vol. 26(12), pages 1121-1133.
    2. Han, Sang Heon & Chang, Daejun & Huh, Cheol, 2011. "Efficiency analysis of radiative slab heating in a walking-beam-type reheating furnace," Energy, Elsevier, vol. 36(2), pages 1265-1272.
    3. Mirko Filipponi & Federico Rossi & Andrea Presciutti & Stefania De Ciantis & Beatrice Castellani & Ambro Carpinelli, 2016. "Thermal Analysis of an Industrial Furnace," Energies, MDPI, vol. 9(10), pages 1-13, October.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Sajad Mirzaei & Nima Bohlooli Arkhazloo & Farzad Bazdidi-Tehrani & Jean-Benoit Morin & Abdelhalim Loucif & Mohammad Jahazi, 2023. "Influence of Spacers and Skid Sizes on Heat Treatment of Large Forgings within an Industrial Electric Furnace," Energies, MDPI, vol. 16(7), pages 1-18, March.
    2. Ricardo S. Gomez & Túlio R. N. Porto & Hortência L. F. Magalhães & Gicelia Moreira & Anastácia M. M. C. N. André & Ruth B. F. Melo & Antonio G. B. Lima, 2019. "Natural Gas Intermittent Kiln for the Ceramic Industry: A Transient Thermal Analysis," Energies, MDPI, vol. 12(8), pages 1-29, April.
    3. Iván D. Palacio-Caro & Pedro N. Alvarado-Torres & Luis F. Cardona-Sepúlveda, 2020. "Numerical Simulation of the Flow and Heat Transfer in an Electric Steel Tempering Furnace," Energies, MDPI, vol. 13(14), pages 1-22, July.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hajaliakbari, Nasrollah & Hassanpour, Saied, 2017. "Analysis of thermal energy performance in continuous annealing furnace," Applied Energy, Elsevier, vol. 206(C), pages 829-842.
    2. Jie Yang & Shaowen Lu & Liangyong Wang, 2020. "Fused magnesia manufacturing process: a survey," Journal of Intelligent Manufacturing, Springer, vol. 31(2), pages 327-350, February.
    3. Liu, H. & Saffaripour, M. & Mellin, P. & Grip, C.-E. & Yang, W. & Blasiak, W., 2014. "A thermodynamic study of hot syngas impurities in steel reheating furnaces – Corrosion and interaction with oxide scales," Energy, Elsevier, vol. 77(C), pages 352-361.
    4. Jiming Lin & Haozhen Li & Yong Zhang & Jianhong Yang, 2022. "Experimental and Numerical Study of a Two-Stage Swirl Burner," Energies, MDPI, vol. 15(3), pages 1-19, February.
    5. Bo Gao & Chunsheng Wang & Yukun Hu & C. K. Tan & Paul Alun Roach & Liz Varga, 2018. "Function Value-Based Multi-Objective Optimisation of Reheating Furnace Operations Using Hooke-Jeeves Algorithm," Energies, MDPI, vol. 11(9), pages 1-18, September.
    6. Sajad Mirzaei & Nima Bohlooli Arkhazloo & Farzad Bazdidi-Tehrani & Jean-Benoit Morin & Abdelhalim Loucif & Mohammad Jahazi, 2023. "Influence of Spacers and Skid Sizes on Heat Treatment of Large Forgings within an Industrial Electric Furnace," Energies, MDPI, vol. 16(7), pages 1-18, March.
    7. Mersedeh Ghadamgahi & Patrik Ölund & Nils Å. I. Andersson & Pär Jönsson, 2017. "Numerical Study on the Effect of Lambda Value (Oxygen/Fuel Ratio) on Temperature Distribution and Efficiency of a Flameless Oxyfuel Combustion System," Energies, MDPI, vol. 10(3), pages 1-16, March.
    8. L. Schoina & R. Jones & S. Burgess & D. Vaughan & L. Andrews & A. Foley & A. Valera Medina, 2023. "Numerical and Techno-Economic Analysis of Batch Annealing Performance Improvements in Tinplate Manufacturing," Energies, MDPI, vol. 16(20), pages 1-28, October.
    9. Landfahrer, M. & Schluckner, C. & Prieler, R. & Gerhardter, H. & Zmek, T. & Klarner, J. & Hochenauer, C., 2019. "Development and application of a numerically efficient model describing a rotary hearth furnace using CFD," Energy, Elsevier, vol. 180(C), pages 79-89.
    10. Ricardo S. Gomez & Túlio R. N. Porto & Hortência L. F. Magalhães & Gicelia Moreira & Anastácia M. M. C. N. André & Ruth B. F. Melo & Antonio G. B. Lima, 2019. "Natural Gas Intermittent Kiln for the Ceramic Industry: A Transient Thermal Analysis," Energies, MDPI, vol. 12(8), pages 1-29, April.
    11. Mirko Filipponi & Federico Rossi & Andrea Presciutti & Stefania De Ciantis & Beatrice Castellani & Ambro Carpinelli, 2016. "Thermal Analysis of an Industrial Furnace," Energies, MDPI, vol. 9(10), pages 1-13, October.
    12. Il Hong Min & Seong-Gil Kang & Cheol Huh, 2018. "Instability Analysis of Supercritical CO 2 during Transportation and Injection in Carbon Capture and Storage Systems," Energies, MDPI, vol. 11(8), pages 1-19, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:139:y:2017:i:c:p:298-314. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.