Contact information of Elsevier
Serial Information
Download restrictions: Full text for ScienceDirect subscribers only
Series handle: RePEc:eee:energy
ISSN: 0360-5442
Citations RSS feed: at CitEc
Impact factors
Access and download statisticsTop item:
Corrections
All material on this site has been provided by the respective publishers and authors. You can help
correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy. See general information about how to correct material in RePEc.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .
Content
2010, Volume 35, Issue 9
- 3563-3568 Experimental investigation on thermal performance of thermosyphon flat-plate solar water heater with a mantle heat exchanger
by Huang, Jinbao & Pu, Shaoxuan & Gao, Wenfeng & Que, Yi
- 3569-3577 Sovereign wealth funds as a new instrument of climate protection policy? A case study of Norway as a pioneer of ethical guidelines for investment policy
by Reiche, Danyel
- 3578-3586 Sensitivity analysis of steam power plant-binary cycle
by Rosyid, H. & Koestoer, R. & Putra, N. & Nasruddin, & Mohamad, A.A. & Yanuar,
- 3587-3592 Technical and economical evaluation of enhanced biomass to liquid fuel processes
by Seiler, Jean-Marie & Hohwiller, Carole & Imbach, Juliette & Luciani, Jean-François
- 3593-3602 Optimum turbine-site matching
by Albadi, M.H. & El-Saadany, E.F.
- 3603-3613 Effects of turpentine and gasoline-like fuel obtained from waste lubrication oil on engine performance and exhaust emission
by Arpa, O. & Yumrutas, R. & Alma, M.H.
- 3614-3622 Diethyl ether as an ignition improver for biogas homogeneous charge compression ignition (HCCI) operation - An experimental investigation
by Sudheesh, K. & Mallikarjuna, J.M.
- 3623-3627 An analysis of energy use efficiency of canola production in Turkey
by Unakitan, G. & Hurma, H. & Yilmaz, F.
- 3628-3639 Experimental study of inlet manifold water injection on combustion and emissions of an automotive direct injection Diesel engine
by Tauzia, Xavier & Maiboom, Alain & Shah, Samiur Rahman
- 3640-3648 Multivariate Granger causality between electricity generation, exports, prices and GDP in Malaysia
by Lean, Hooi Hooi & Smyth, Russell
- 3649-3656 Analyzing variables for district heating collaborations between energy utilities and industries
by Thollander, P. & Svensson, I.L. & Trygg, L.
- 3657-3665 Prospective national and regional environmental performance: Boundary estimations using a combined data envelopment – stochastic frontier analysis approach
by Vaninsky, Alexander
- 3666-3673 Ecological assessment and economic feasibility to utilize first generation biofuels in cogeneration output cycle – The case of Lithuania
by Raslavičius, Laurencas & Bazaras, Žilvinas
- 3674-3685 Short-term electricity demand and gas price forecasts using wavelet transforms and adaptive models
by Nguyen, Hang T. & Nabney, Ian T.
- 3686-3695 Second law analysis and heat transfer in a cross-flow heat exchanger with a new winglet-type vortex generator
by Kotcioglu, Isak & Caliskan, Sinan & Cansiz, Ahmet & Baskaya, Senol
- 3696-3706 On the Second-Law inconsistency of Emergy Analysis
by Sciubba, Enrico
- 3707-3716 Experimental and numerical investigation of a flat-plate solar collector
by Alvarez, A. & Cabeza, O. & Muñiz, M.C. & Varela, L.M.
- 3717-3721 Modeling stump biomass of stands using harvester measurements for adaptive energy wood procurement systems
by Vesa, Lauri & Palander, Teijo
- 3722-3730 INLUX-DBR – A calculation code to calculate indoor natural illuminance inside buildings under various sky conditions
by Ferraro, V. & Igawa, N. & Marinelli, V.
- 3731-3737 Energy intensity and greenhouse gases footprint of metallurgical processes: A continuous steelmaking case study
by Barati, Mansoor
- 3738-3750 Optimizing the energy efficiency of conventional multi-cylinder dryers in the paper industry
by Laurijssen, Jobien & De Gram, Frans J. & Worrell, Ernst & Faaij, Andre
- 3751-3762 Radial Basis Function Network-based prediction of global solar radiation data: Application for sizing of a stand-alone photovoltaic system at Al-Madinah, Saudi Arabia
by Benghanem, Mohamed & Mellit, Adel
- 3763-3772 Hydrogen distribution in the refinery using mathematical modeling
by Kumar, A. & Gautami, G. & Khanam, S.
- 3773-3782 The effect of daylight saving time options on electricity consumption of Turkey
by Karasu, Servet
- 3783-3787 Single and double pass solar air heaters with wire mesh as packing bed
by Aldabbagh, L.B.Y. & Egelioglu, F. & Ilkan, M.
- 3788-3792 Characterization of energy use in 300 mm DRAM (Dynamic Random Access Memory) wafer fabrication plants (fabs) in Taiwan
by Hu, Shih-Cheng & Xu, Tengfang & Chaung, Tony & Chan, David Y.-L.
- 3793-3798 Experimental study of R152a and R32 to replace R134a in a domestic refrigerator
by Bolaji, B.O.
- 3799-3802 Experimental investigation of a box-type solar cooker with a finned absorber plate
by Harmim, A. & Belhamel, M. & Boukar, M. & Amar, M.
- 3803-3813 The socio-political economy of nuclear energy in China and India
by Sovacool, Benjamin K. & Valentine, Scott Victor
- 3814-3820 A new method of leak location for the natural gas pipeline based on wavelet analysis
by Yang, Zhao & Xiong, Zhuang & Shao, Min
- 3821-3826 Energetic and exergetic performance evaluation of the quadruple-effect evaporator unit in tomato paste production
by Sogut, Z. & Ilten, N. & Oktay, Z.
- 3827-3837 DMLHFLC (Dual mode linguistic hedge fuzzy logic controller) for an isolated wind–diesel hybrid power system with BES (battery energy storage) unit
by Mohamed Thameem Ansari, M. & Velusami, S.
- 3838-3848 Fully automatic AI-based leak detection system
by Tylman, Wojciech & Kolczyński, Jakub & Anders, George J.
- 3849-3862 A systematic tool for the minimization of the life cycle impact of solar assisted absorption cooling systems
by Gebreslassie, Berhane H. & Guillén-Gosálbez, Gonzalo & Jiménez, Laureano & Boer, Dieter
- 3863-3869 Influence of CFB (circulating fluidized bed) boiler bottom ash heat recovery mode on thermal economy of units
by Zeng, Bing & Lu, Xiaofeng & Liu, Hanzhou
- 3870-3876 Hour-ahead wind power and speed forecasting using simultaneous perturbation stochastic approximation (SPSA) algorithm and neural network with fuzzy inputs
by Hong, Ying-Yi & Chang, Huei-Lin & Chiu, Ching-Sheng
- 3877-3882 Enhancement of APCI cycle efficiency with absorption chillers
by Mortazavi, Amir & Somers, Christopher & Alabdulkarem, Abdullah & Hwang, Yunho & Radermacher, Reinhard
- 3883-3890 Optimal reserve capacity allocation with consideration of customer reliability requirements
by Najafi, M. & Ehsan, M. & Fotuhi-Firuzabad, M. & Akhavein, A. & Afshar, K.
- 3891-3901 Performance analysis of a direct expansion air dehumidification system combined with membrane-based total heat recovery
by Liang, Cai-Hang & Zhang, Li-Zhi & Pei, Li-Xia
- 3902-3908 Tetra-n-butyl ammonium bromide semi-clathrate hydrate process for post-combustion capture of carbon dioxide in the presence of dodecyl trimethyl ammonium chloride
by Li, Xiao-Sen & Xu, Chun-Gang & Chen, Zhao-Yang & Wu, Hui-Jie
- 3909-3920 An analytical method for the measurement of energy system sustainability in urban areas
by Jovanovic, Marina & Afgan, Naim & Bakic, Vukman
- 3921-3931 Potential impact of (CET) carbon emissions trading on China’s power sector: A perspective from different allowance allocation options
by Cong, Rong-Gang & Wei, Yi-Ming
- 3932-3940 Seasonal energy utilization optimization in an enterprise
by Mei-Ling, Zheng & Wen, Wang
- 3941-3957 Synthesis methods of low-Pt-loading electrocatalysts for proton exchange membrane fuel cell systems
by Esmaeilifar, A. & Rowshanzamir, S. & Eikani, M.H. & Ghazanfari, E.
- 3958-3974 Review of mathematical models of future oil supply: Historical overview and synthesizing critique
by Brandt, Adam R.
2010, Volume 35, Issue 8
- 3109-3122 A global coal production forecast with multi-Hubbert cycle analysis
by Patzek, Tadeusz W. & Croft, Gregory D.
- 3123-3130 Verifying the spin of centrifuges
by Delbeke, J.F.A. & Eklund, G. & van Esch, B.P.M. & Janssens-Maenhout, G. & Janssens, W.
- 3131-3142 Voltage stabilization of VSI SMES capacitors and voltage sag compensation by SMES using novel switching strategies
by Mohammad Reza, Alizadeh Pahlavani & Hossine Ali, Mohammadpour & Abbas, Shoulaie
- 3143-3154 Power and cogeneration technology environomic performance typification in the context of CO2 abatement part I: Power generation
by Li, Hongtao & Marechal, Francois & Favrat, Daniel
- 3155-3171 A genetic evolving ant direction DE for OPF with non-smooth cost functions and statistical analysis
by Vaisakh, K. & Srinivas, L.R.
- 3172-3178 Experimental investigation of timed manifold injection of acetylene in direct injection diesel engine in dual fuel mode
by Lakshmanan, T. & Nagarajan, G.
- 3179-3193 Renewable energies: Choosing the best options
by Gonçalves da Silva, C.
- 3194-3203 Energy conservation measures in buildings heated by district heating – A local energy system perspective
by Difs, Kristina & Bennstam, Marcus & Trygg, Louise & Nordenstam, Lena
- 3204-3220 Durability testing modified compression ignition engines fueled with straight plant oil
by Basinger, M. & Reding, T. & Rodriguez-Sanchez, F.S. & Lackner, K.S. & Modi, V.
- 3221-3229 Application of the exergy method to environmental impact estimation: The ammonium nitrate production as a case study
by Kirova-Yordanova, Zornitza
- 3230-3238 Characteristics and economic evaluation of a power plant applying oxy-fuel combustion to increase power output and decrease CO2 emission
by Pak, Pyong Sik & Lee, Young Duk & Ahn, Kook Young
- 3239-3244 Gasification characteristics of coke and mixture with coal in an entrained-flow gasifier
by Lee, See Hoon & Yoon, Sang Jun & Ra, Ho Won & Son, Young Il & Hong, Jai Chang & Lee, Jae Goo
- 3245-3255 Performance analysis of hybrid photovoltaic/diesel energy system under Malaysian conditions
by Lau, K.Y. & Yousof, M.F.M. & Arshad, S.N.M. & Anwari, M. & Yatim, A.H.M.
- 3256-3262 Piping network design of geothermal district heating systems: Case study for a university campus
by Yildirim, Nurdan & Toksoy, Macit & Gokcen, Gulden
- 3263-3272 Energy and exergy analyses of a new four-step copper–chlorine cycle for geothermal-based hydrogen production
by Tolga Balta, M. & Dincer, Ibrahim & Hepbasli, Arif
- 3273-3283 Selection of capacitance for self-excited six-phase induction generator for stand-alone renewable energy generation
by Singh, G.K. & Senthil Kumar, A. & Saini, R.P.
- 3284-3300 Warm season cooling requirements for passive buildings in Southeastern Europe (Romania)
by Badescu, Viorel & Laaser, Nadine & Crutescu, Ruxandra
- 3301-3306 Modeling and sensitivity analysis of energy inputs for apple production in Iran
by Rafiee, Shahin & Mousavi Avval, Seyed Hashem & Mohammadi, Ali
- 3307-3314 First and second laws analysis of the heat pipe/ejector refrigeration cycle
by Ziapour, Behrooz M. & Abbasy, Ahad
- 3315-3322 Changes in the GHG emission intensity in EU-15: Lessons from a decomposition analysis
by Bhattacharyya, Subhes C. & Matsumura, Wataru
- 3323-3331 Energy and exergy analysis of fossil plant and heat pump building heating system at two different dead-state temperatures
by Lohani, S.P.
- 3332-3339 The future of the European natural gas market: A quantitative assessment
by Aguilera, Roberto F.
- 3340-3348 Economic challenges for the future relevance of biofuels in transport in EU countries
by Ajanovic, A. & Haas, R.
- 3349-3363 Unsteady Aerodynamics of a Savonius wind rotor: a new computational approach for the simulation of energy performance
by D’Alessandro, V. & Montelpare, S. & Ricci, R. & Secchiaroli, A.
- 3364-3374 A distribution network expansion planning model considering distributed generation options and techo-economical issues
by Soroudi, Alireza & Ehsan, Mehdi
- 3375-3380 Application of Powell’s optimization method to surge arrester circuit models’ parameters
by Christodoulou, C.A. & Vita, V. & Ekonomou, L. & Chatzarakis, G.E. & Stathopulos, I.A.
- 3381-3387 Variations of wind speed in time on Jeju Island, Korea
by Ko, Kyungnam & Kim, Kyoungbo & Huh, Jongchul
- 3388-3398 Optimization design of BCHP system to maximize to save energy and reduce environmental impact
by Wang, Jiangjiang & Zhai, Zhiqiang (John) & Jing, Youyin & Zhang, Chunfa
- 3399-3416 Economic limit of field production in Louisiana
by Kaiser, Mark J.
- 3417-3421 Superior hydrogen storage properties of MgH2–10 wt.% TiC composite
by Fan, Mei-Qiang & Liu, Shu-sheng & Zhang, Yao & Zhang, Jian & Sun, Li-Xian & Xu, Fen
- 3422-3428 Thermodynamic analyses and optimization of a recompression N2O Brayton power cycle
by Sarkar, Jahar
- 3429-3440 Possibilities of electricity generation in the Republic of Croatia by means of geothermal energy
by Guzović, Z. & Lončar, D. & Ferdelji, N.
- 3441-3448 Impact of carbon cost on wholesale electricity price: A note on price pass-through issues
by Kim, Wook & Chattopadhyay, Deb & Park, Jong-bae
- 3449-3453 Blends of biodiesels synthesized from non-edible and edible oils: Influence on the OS (oxidation stability)
by Sarin, Amit & Arora, Rajneesh & Singh, N.P. & Sarin, Rakesh & Malhotra, R.K.
- 3454-3460 GC-MS used in study on the mechanism of the viscosity reduction of heavy oil through aquathermolysis catalyzed by aromatic sulfonic H3PMo12O40
by Chen, Yanling & He, Jing & Wang, Yuanqing & Li, Pei
- 3461-3473 Analysis of energy-efficiency opportunities for the cement industry in Shandong Province, China: A case study of 16 cement plants
by Hasanbeigi, Ali & Price, Lynn & Lu, Hongyou & Lan, Wang
- 3474-3482 A new criterion for the allocation of residues cost in exergoeconomic analysis of energy systems
by Seyyedi, Seyyed Masoud & Ajam, Hossein & Farahat, Said
- 3483-3500 A numerical evaluation of combustion in porous media by EGM (Entropy Generation Minimization)
by Bidi, M. & Nobari, M.R.H. & Avval, M. Saffar
- 3501-3507 A method for estimation of recoverable heat from blowdown systems during steam generation
by Bahadori, Alireza & Vuthaluru, Hari B.
- 3508-3516 Thermal radiation role in conjugate heat transfer across a multiple-cavity building block
by Antar, Mohamed A.
2010, Volume 35, Issue 7
- 2745-2751 Improved technical efficiency and exogenous factors in transportation demand for energy: An application of structural time series analysis to South Korean data
by Sa'ad, Suleiman
- 2752-2760 Novel conceptual design of a supercritical pulverized coal boiler utilizing high temperature air combustion (HTAC) technology
by Schaffel-Mancini, Natalia & Mancini, Marco & Szlek, Andrzej & Weber, Roman
- 2761-2766 Catalytic pyrolysis of biomass: Effects of pyrolysis temperature, sweeping gas flow rate and MgO catalyst
by Pütün, Ersan
- 2767-2776 Development of a software package for community energy system assessment – Part I: Building a load estimator
by Chung, Mo & Park, Hwa-Choon
- 2777-2795 An integrated systems framework for service vessel forecasting in the Gulf of Mexico
by Kaiser, Mark J.
- 2796-2806 Design of experiment study of the parameters that affect performance of three flow plate configurations of a proton exchange membrane fuel cell
by Carton, J.G. & Olabi, A.G.
- 2807-2813 The substitutive effect of biofuels on fossil fuels in the lower and higher crude oil price periods
by Chang, Ting-Huan & Su, Hsin-Mei
- 2814-2818 Co-combustion of refuse derived fuel with Korean anthracite in a commercial circulating fluidized bed boiler
by Lee, Jong-Min & Kim, Down-Won & Kim, Jae-Sung & Na, Jeong-Geol & Lee, See-Hoon
- 2819-2823 Flash pyrolysis of jatropha oil cake in electrically heated fluidized bed reactor
by Raja, S. Antony & Kennedy, Z. Robert & Pillai, B.C. & Lee, C. Lindon Robert
- 2824-2835 Thermodynamic analysis of waste heat power generation system
by Guo, Jiangfeng & Xu, Mingtian & Cheng, Lin
- 2836-2842 Thermosyphon installation for energy thrift in a smoked fish sausage oven (TISO)
by Parametthanuwat, T. & Rittidech, S. & Booddachan, K.
- 2843-2851 A computational hydrodynamics method for horizontal axis turbine – Panel method modeling migration from propulsion to turbine energy
by Liu, Pengfei
- 2852-2860 Dynamics of the oil transition: Modeling capacity, depletion, and emissions
by Brandt, Adam R. & Plevin, Richard J. & Farrell, Alexander E.
- 2861-2869 Extended exergy accounting applied to biodiesel production
by Talens Peiró, L. & Villalba Méndez, G. & Sciubba, E. & Gabarrell i Durany, X.
- 2870-2877 Natural convection heat transfer from a heat sink with hollow/perforated circular pin fins
by Elshafei, E.A.M.
- 2878-2885 Energy optimization for liquefaction process of natural gas in peak shaving plant
by Mokarizadeh Haghighi Shirazi, M. & Mowla, D.
- 2886-2892 Supply curve bidding of electricity in constrained power networks
by Al-Agtash, Salem Y.
- 2893-2900 Experimental comparison and analysis on silica gel and polymer coated fin-tube heat exchangers
by Ge, T.S. & Dai, Y.J. & Wang, R.Z. & Peng, Z.Z.
- 2901-2908 Cost analysis of different solar still configurations
by Kabeel, A.E. & Hamed, A.M. & El-Agouz, S.A.
- 2909-2921 Power supply for pumping systems in northern Chile: Photovoltaics as alternative to grid extension and diesel engines
by Chueco-Fernández, Francisco J. & Bayod-Rújula, Ángel A.
- 2922-2926 Experiment assessment of hydrogen production from activated aluminum alloys in portable generator for fuel cell applications
by Fan, Mei–qiang & Sun, Li–xian & Xu, Fen
- 2927-2933 A comparative study on energy use and cost analysis of potato production under different farming technologies in Hamadan province of Iran
by Zangeneh, Morteza & Omid, Mahmoud & Akram, Asadollah
- 2934-2938 Determining profits for solar energy with remote sensing data
by Wang, Shifeng & Koch, Barbara
- 2939-2944 Small-molecule gas sorption and diffusion in coal: Molecular simulation
by Hu, Haixiang & Li, Xiaochun & Fang, Zhiming & Wei, Ning & Li, Qianshu
- 2945-2952 Electric energy consumption in the cotton textile processing stages
by Palamutcu, S.
- 2953-2964 Comprehensive exergetic and economic comparison of PWR and hybrid fossil fuel-PWR power plants
by Sayyaadi, Hoseyn & Sabzaligol, Tooraj
- 2965-2971 Economic analysis of the profitability of energy-saving architectural measures for the achievement of the EPB-standard
by Audenaert, A. & De Boeck, L. & Roelants, K.
- 2972-2984 A novel method for the design of CHCP (combined heat, cooling and power) systems for buildings
by Martínez-Lera, S. & Ballester, J.
- 2985-2991 Microwave pyrolysis, a novel process for recycling waste automotive engine oil
by Lam, Su Shiung & Russell, Alan D. & Chase, Howard A.
- 2992-2998 Experimental determination and analysis of CO2, SO2 and NOx emission factors in Iran’s thermal power plants
by Nazari, S. & Shahhoseini, O. & Sohrabi-Kashani, A. & Davari, S. & Paydar, R. & Delavar-Moghadam, Z.
- 2999-3007 Demand bidding construction for a large consumer through a hybrid IGDT-probability methodology
by Zare, Kazem & Moghaddam, Mohsen Parsa & Sheikh El Eslami, Mohammad Kazem
- 3008-3021 Modeling of multiphase combustion and deposit formation in a biomass-fed furnace
by Venturini, P. & Borello, D. & Iossa, C. & Lentini, D. & Rispoli, F.
- 3022-3030 On-line designed hybrid controller with adaptive observer for variable-speed wind generation system
by Lin, Whei-Min & Hong, Chih-Ming & Cheng, Fu-Sheng
- 3031-3039 Nuclear and clean coal technology options for sustainable development in India
by Mallah, Subhash & Bansal, N.K.
- 3040-3047 Prospect of wind–PV-battery hybrid power system as an alternative to grid extension in Bangladesh
by Nandi, Sanjoy Kumar & Ghosh, Himangshu Ranjan
- 3048-3065 Energy and exergy utilizations of the U.S. manufacturing sector
by Al-Ghandoor, A. & Phelan, P.E. & Villalobos, R. & Jaber, J.O.
- 3066-3071 Influence of storage time on the quality and combustion behaviour of pine woodchips
by Casal, M.D. & Gil, M.V. & Pevida, C. & Rubiera, F. & Pis, J.J.
- 3072-3080 A new three-stage method for solving unit commitment problem
by Khanmohammadi, S. & Amiri, M. & Haque, M. Tarafdar
- 3081-3087 Ethanol production process from banana fruit and its lignocellulosic residues: Energy analysis
by Velásquez-Arredondo, H.I. & Ruiz-Colorado, A.A. & De Oliveira, S.
- 3088-3096 Evaluation of the performance of a ground-source heat-pump system with series GHE (ground heat exchanger) in the cold climate region
by Bakirci, Kadir
- 3097-3102 Forecast of oil reserves and production in Daqing oilfield of China
by Tang, Xu & Zhang, Baosheng & Höök, Mikael & Feng, Lianyong
- 3103-3108 Thermodynamic and kinetic model of reforming coke-oven gas with steam
by Zhang, Jiayuan & Zhang, Xiaohui & Chen, Zhuo & Li, Li
2010, Volume 35, Issue 6
- 2351-2366 An integrated fuzzy regression algorithm for energy consumption estimation with non-stationary data: A case study of Iran
by Azadeh, A. & Saberi, M. & Seraj, O.
- 2367-2373 Energy conservation in the greenhouse system: A steady state analysis
by Singh, R.D. & Tiwari, G.N.
- 2374-2386 Laboratory studies on combustion cavity growth in lignite coal blocks in the context of underground coal gasification
by Daggupati, Sateesh & Mandapati, Ramesh N. & Mahajani, Sanjay M. & Ganesh, Anuradda & Mathur, D.K. & Sharma, R.K. & Aghalayam, Preeti
- 2387-2399 Analysis of exhaust waste heat recovery from a dual fuel low temperature combustion engine using an Organic Rankine Cycle
by Srinivasan, Kalyan K. & Mago, Pedro J. & Krishnan, Sundar R.
- 2400-2406 Optimal design of transverse ribs in tubes for thermal performance enhancement
by Kim, Kyung Min & Kim, Beom Seok & Lee, Dong Hyun & Moon, Hokyu & Cho, Hyung Hee
- 2407-2418 Evaluation and analysis of a proxy indicator for the estimation of gate-to-gate energy consumption in the early process design phases: The case of organic solvent production
by Bumann, A.A. & Papadokonstantakis, S. & Sugiyama, H. & Fischer, U. & Hungerbühler, K.
- 2419-2429 Assessment of CO2 emissions and its reduction potential in the Korean petroleum refining industry using energy-environment models
by Park, Sangwon & Lee, Seungmoon & Jeong, Suk Jae & Song, Ho-Jun & Park, Jin-Won
- 2430-2439 Assessing temperature of riverbank filtrate water for geothermal energy utilization
by Shin, Jiyoun & Kim, Kyung-Ho & Lee, Kang-Kun & Kim, Hyoung-Soo
- 2440-2447 Intelligent approach to maximum power point tracking control strategy for variable-speed wind turbine generation system
by Lin, Whei-Min & Hong, Chih-Ming
- 2448-2454 A new approach to analysis and optimization of evaporative cooling system I: Theory
by Chen, Qun & Yang, Kangding & Wang, Moran & Pan, Ning & Guo, Zeng-Yuan
- 2455-2460 A novel approach to degree-hour calculation: Indoor and outdoor reference temperature based degree-hour calculation
by Coskun, C.
- 2461-2467 Experimental study of gas engine driven air to water heat pump in cooling mode
by Elgendy, E. & Schmidt, J.
- 2468-2483 Experimental study of the transient adsorption/desorption characteristics of silica gel particles in fluidized bed
by Hamed, Ahmed M. & Abd El Rahman, Walaa R. & El-Emam, S.H.
- 2484-2492 Performance and emission study of preheated Jatropha oil on medium capacity diesel engine
by Chauhan, Bhupendra Singh & Kumar, Naveen & Du Jun, Yong & Lee, Kum Bae
- 2493-2504 A perspective on incorporation of glycerin purification process in biodiesel plants using waste cooking oil as feedstock
by Singhabhandhu, Ampaitepin & Tezuka, Tetsuo
- 2505-2510 Decomposing the influencing factors of industrial carbon emissions in Shanghai using the LMDI method
by Zhao, Min & Tan, Lirong & Zhang, Weiguo & Ji, Minhe & Liu, Yuan & Yu, Lizhong
- 2511-2516 Optical performance of inclined south-north single-axis tracked solar panels
by Li, Zhimin & Liu, Xinyue & Tang, Runsheng
- 2517-2527 Multicriteria renewable energy planning using an integrated fuzzy VIKOR & AHP methodology: The case of Istanbul
by Kaya, Tolga & Kahraman, Cengiz
- 2528-2534 Silver and oxide hybrids of catalysts during formaldehyde production
by Kralj, Anita Kovač
- 2535-2543 Exergetic analysis of an innovative small scale combined cycle cogeneration system
by Badami, M. & Mura, M.
- 2544-2551 The waste-to-energy framework for integrated multi-waste utilization: Waste cooking oil, waste lubricating oil, and waste plastics
by Singhabhandhu, Ampaitepin & Tezuka, Tetsuo
- 2552-2556 Development of engine oil using palm oil as a base stock for four-stroke engines
by Cheenkachorn, Kraipat & Fungtammasan, Bundit
- 2557-2579 Thermodynamic optimization of biomass gasification for decentralized power generation and Fischer–Tropsch synthesis
by Buragohain, Buljit & Mahanta, Pinakeswar & Moholkar, Vijayanand S.
- 2580-2586 A study on torrefaction of various biomass materials and its impact on lignocellulosic structure simulated by a thermogravimetry
by Chen, Wei-Hsin & Kuo, Po-Chih
- 2587-2595 Hybrid solar–wind system with battery storage operating in grid-connected and standalone mode: Control and energy management – Experimental investigation
by Dali, Mehdi & Belhadj, Jamel & Roboam, Xavier
- 2596-2602 What goes up: Recent trends in Mexican residential energy use
by Rosas-Flores, Jorge Alberto & Gálvez, David Morillón
- 2603-2609 Advanced software tool for the dynamic analysis of heat transfer in buildings; applications to Syria
by Skeiker, Kamal
- 2610-2628 CO2 capture and separation technologies for end-of-pipe applications – A review
by Olajire, Abass A.
- 2631-2638 Energy resources and use: The present (2008) situation and possible sustainable paths to the future
by Lior, Noam
- 2639-2646 A new apartment construction technology with effective CO2 emission reduction capabilities
by Hong, Won-Kee & Kim, Jin-Min & Park, Seon-Chee & Lee, Seung-Geun & Kim, Seung-Il & Yoon, Ki-Joon & Kim, Hee-Cheul & Kim, Jeong Tai
- 2647-2653 New developments in illumination, heating and cooling technologies for energy-efficient buildings
by Han, H.J. & Jeon, Y.I. & Lim, S.H. & Kim, W.W. & Chen, K.
- 2654-2666 Application of high-density daylight for indoor illumination
by Han, Hyunjoo & Tai Kim, Jeong
- 2667-2673 Optimization of systems with the combination of ground-source heat pump and solar collectors in dwellings
by Kjellsson, Elisabeth & Hellström, Göran & Perers, Bengt
- 2674-2680 Fabrication and testing of a non-glass vacuum-tube collector for solar energy utilization
by Chen, K. & Oh, S.J. & Kim, N.J. & Lee, Y.J. & Chun, W.G.
- 2681-2687 Analysis of thermal and electrical performance of semi-transparent photovoltaic (PV) module
by Park, K.E. & Kang, G.H. & Kim, H.I. & Yu, G.J. & Kim, J.T.
- 2688-2693 Experimental study of natural convection heat transfer in a microencapsulated phase change material slurry
by Diaconu, Bogdan M. & Varga, Szabolcs & Oliveira, Armando C.
- 2694-2702 CFD investigation on the flow structure inside thermo vapor compressor
by Ji, MyoungKuk & Utomo, Tony & Woo, JuSik & Lee, YongHun & Jeong, HyoMin & Chung, HanShik
- 2703-2708 Novel sorbents of ethanol “salt confined to porous matrix” for adsorptive cooling
by Gordeeva, Larisa & Aristov, Yuriy
- 2709-2716 Optimal location of lignocellulosic ethanol refineries with polygeneration in Sweden
by Leduc, S. & Starfelt, F. & Dotzauer, E. & Kindermann, G. & McCallum, I. & Obersteiner, M. & Lundgren, J.
- 2717-2722 Formation enhancement of methane hydrate for natural gas transport and storage
by Kim, Nam-Jin & Hwan Lee, Jeong & Cho, Yil Sik & Chun, Wongee
- 2723-2728 Pyrolysis of soybean oil with H-ZSM5 (Proton-exchange of Zeolite Socony Mobil #5) and MCM41 (Mobil Composition of Matter No. 41) catalysts in a fixed-bed reactor
by Ngo, Thanh-An & Kim, Jinsoo & Kim, Sun Kuk & Kim, Seung-Soo
- 2729-2733 Gas hydrate formation process for pre-combustion capture of carbon dioxide
by Lee, Hyun Ju & Lee, Ju Dong & Linga, Praveen & Englezos, Peter & Kim, Young Seok & Lee, Man Sig & Kim, Yang Do
- 2734-2743 An experimental study of syn-gas production via microwave plasma reforming of methane, iso-octane and gasoline
by Kim, Tae-Soo & Song, Soonho & Chun, Kwang-Min & Lee, Sang Hun
2010, Volume 35, Issue 5
- 1867-1873 Integration of solar thermal for improved energy efficiency in low-temperature-pinch industrial processes
by Atkins, Martin J. & Walmsley, Michael R.W. & Morrison, Andrew S.
- 1874-1883 A numerical investigation of a diffusion-absorption refrigeration cycle based on R124-DMAC mixture for solar cooling
by Ben Ezzine, N. & Garma, R. & Bellagi, A.
- 1884-1897 Hybrid membrane/cryogenic separation of oxygen from air for use in the oxy-fuel process
by Burdyny, Thomas & Struchtrup, Henning
- 1898-1907 Influence of the rated power in the performance of different proton exchange membrane (PEM) fuel cells
by San Martin, J.I. & Zamora, I. & San Martin, J.J. & Aperribay, V. & Torres, E. & Eguia, P.
- 1908-1915 A probabilistic risk-based approach for spinning reserve provision using day-ahead demand response program
by Shayesteh, E. & Yousefi, A. & Parsa Moghaddam, M.
- 1916-1926 Quick-E-scan: A methodology for the energy scan of SMEs
by Cagno, E. & Trucco, P. & Trianni, A. & Sala, G.
- 1927-1935 Experimental study on liquid/solid phase change for cold energy storage of Liquefied Natural Gas (LNG) refrigerated vehicle
by Tan, Hongbo & Li, Yanzhong & Tuo, Hanfei & Zhou, Man & Tian, Baocong
- 1936-1945 Second-law performance of heat exchangers for waste heat recovery
by San, J.-Y.
- 1946-1953 Generation of typical meteorological year for different climates of China
by Jiang, Yingni
- 1954-1963 Optimal the tilt angles for photovoltaic modules using PSO method with nonlinear time-varying evolution
by Chang, Ying-Pin
- 1964-1972 Offshore and inshore wave energy assessment: Asturias (N Spain)
by Iglesias, G. & Carballo, R.
- 1973-1980 From potential forecast to foresight of Turkey's renewable energy with Delphi approach
by Celiktas, Melih Soner & Kocar, Gunnur
- 1981-1996 Thermoeconomic optimization of a hybrid pressurized water reactor (PWR) power plant coupled to a multi effect distillation desalination system with thermo-vapor compressor (MED-TVC)
by Ansari, Kambiz & Sayyaadi, Hoseyn & Amidpour, Majid
- 1997-2005 Reheat optimization of the variable-air-volume box
by Kusiak, Andrew & Li, Mingyang
- 2006-2012 Performance evaluation and modeling of a hybrid cooling system combining a screw water chiller with a ground source heat pump in a building
by Jeon, Jongug & Lee, Sunil & Hong, Daehie & Kim, Yongchan
- 2013-2021 An oil demand and supply model incorporating monetary policy
by Askari, Hossein & Krichene, Noureddine
- 2022-2032 Numerical heat transfer analysis of the packed bed latent heat storage system based on an effective packed bed model
by Xia, L. & Zhang, P. & Wang, R.Z.
- 2033-2042 Short term decisions for long term problems – The effect of foresight on model based energy systems analysis
by Keppo, Ilkka & Strubegger, Manfred
- 2043-2048 Saving energy and reducing pollution by use of emulsified palm-biodiesel blends with bio-solution additive
by Chen, Kang-Shin & Lin, Yuan-Chung & Hsieh, Lien-Te & Lin, Long-Full & Wu, Chia-Chieh
- 2049-2058 Cold recovery during regasification of LNG part one: Cold utilization far from the regasification facility
by La Rocca, Vincenzo
- 2059-2069 Theoretical efficiency limits for energy conversion devices
by Cullen, Jonathan M. & Allwood, Julian M.
- 2070-2078 Energy demand for rural household heating to suitable levels in the Loess Hilly Region, Gansu Province, China
by Niu, Shu-wen & Li, Yi-xin & Ding, Yong-xia & Qin, Jing
- 2079-2087 Hybrid Fuel Impact Reconciliation Method: An integral tool for thermoeconomic diagnosis
by Pacheco Ibarra, J.J. & Rangel Hernández, V.H. & Zaleta Aguilar, A. & Valero, A.
- 2088-2098 Structural analysis of electricity consumption by productive sectors. The Spanish case
by Alcántara, Vicent & del Río, Pablo & Hernández, Félix
- 2099-2108 Numerical model and investigations of the externally heated valve Joule engine
by Wojewoda, Jerzy & Kazimierski, Zbyszko
- 2109-2118 Energy assessment of peri-urban horticulture and its uncertainty: Case study for Bogota, Colombia
by Bojacá, C.R. & Schrevens, E.
- 2119-2129 Wind power smoothing using fuzzy logic pitch controller and energy capacitor system for improvement Micro-Grid performance in islanding mode
by Kamel, Rashad M. & Chaouachi, Aymen & Nagasaka, Ken
- 2130-2133 An energy-saving opportunity in producing lubricating oil using mixed-solventin simulated Rotary Disc Contacting (RDC) extraction tower
by Hatamipour, M.S. & Fakhr Hoseini, S.M. & Tavakkoli, T. & Mehrkesh, A.H.
Printed from https://ideas.repec.org/s/eee/energy155.html
