IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v36y2011i6p3924-3932.html
   My bibliography  Save this article

Biodiesel/mineral diesel fuel mixtures: Spray evolution and engine performance and emissions characterization

Author

Listed:
  • Valentino, Gerardo
  • Allocca, Luigi
  • Iannuzzi, Stefano
  • Montanaro, Alessandro

Abstract

The interest in energy from biomass, in particular for transportation, is related to the need to differentiate the energy sources to improve environment and protect human health. Objective of this study is a comparative evaluation of performance and exhaust emissions of an automotive diesel engine fuelled by mixtures of rapeseed and soybean methyl ester with reference to mineral diesel fuel. The spatial and temporal jet evolutions have been characterized injecting the fuel in a quiescent vessel by a standing alone common rail apparatus at diesel-like gas density conditions. The injection strategies have been chosen as representative of different engine working conditions for several speeds and loads, injecting the fuel in a non-evaporating high-density vessel. Fuel injection rate measurements, spatial and temporal fuel distribution have been carried out processing jet images captured by a CCD camera. Engine tests have been performed on a 4-cylinder DI Diesel engine for automotive applications equipped with a common rail 7-hole nozzle electro-injector system. Engine performance, gas emissions and smoke have been measured at the engine speeds of 1500 and 2500 RPM for different loads. Two different fuel blends, RME50 and SME50, have been tested comparing their performance and emissions with the diesel ones.

Suggested Citation

  • Valentino, Gerardo & Allocca, Luigi & Iannuzzi, Stefano & Montanaro, Alessandro, 2011. "Biodiesel/mineral diesel fuel mixtures: Spray evolution and engine performance and emissions characterization," Energy, Elsevier, vol. 36(6), pages 3924-3932.
    • Handle: RePEc:eee:energy:v:36:y:2011:i:6:p:3924-3932
    DOI: 10.1016/j.energy.2010.10.052
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544210006158
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2010.10.052?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Tormos, Bernardo & Novella, Ricardo & García, Antonio & Gargar, Kevin, 2010. "Comprehensive study of biodiesel fuel for HSDI engines in conventional and low temperature combustion conditions," Renewable Energy, Elsevier, vol. 35(2), pages 368-378.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Kuti, Olawole Abiola & Nishida, Keiya & Zhu, Jingyu, 2013. "Experimental studies on spray and gas entrainment characteristics of biodiesel fuel: Implications of gas entrained and fuel oxygen content on soot formation," Energy, Elsevier, vol. 57(C), pages 434-442.
    2. Moon, Seoksu, 2016. "Novel insights into the dynamic structure of biodiesel and conventional fuel sprays from high-pressure diesel injectors," Energy, Elsevier, vol. 115(P1), pages 615-625.
    3. Yulin Chen & Songtao Liu & Xiaoyu Guo & Chaojie Jia & Xiaodong Huang & Yaodong Wang & Haozhong Huang, 2021. "Experimental Research on the Macroscopic and Microscopic Spray Characteristics of Diesel-PODE 3-4 Blends," Energies, MDPI, vol. 14(17), pages 1-24, September.
    4. Anis, Samsudin & Budiandono, Galuh Nur, 2019. "Investigation of the effects of preheating temperature of biodiesel-diesel fuel blends on spray characteristics and injection pump performances," Renewable Energy, Elsevier, vol. 140(C), pages 274-280.
    5. Allocca, Luigi & Mancaruso, Ezio & Montanaro, Alessandro & Sequino, Luigi & Vaglieco, Bianca Maria, 2014. "Evaluation of RME (rapeseed methyl ester) and mineral diesel fuels behaviour in quiescent vessel and EURO 5 engine," Energy, Elsevier, vol. 77(C), pages 783-790.
    6. Khandal, S.V. & Banapurmath, N.R. & Gaitonde, V.N. & Hiremath, S.S., 2017. "Paradigm shift from mechanical direct injection diesel engines to advanced injection strategies of diesel homogeneous charge compression ignition (HCCI) engines- A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 70(C), pages 369-384.
    7. Feng, Zehao & Zhan, Cheng & Tang, Chenglong & Yang, Ke & Huang, Zuohua, 2016. "Experimental investigation on spray and atomization characteristics of diesel/gasoline/ethanol blends in high pressure common rail injection system," Energy, Elsevier, vol. 112(C), pages 549-561.
    8. Bohl, Thomas & Tian, Guohong & Smallbone, Andrew & Roskilly, Anthony P., 2017. "Macroscopic spray characteristics of next-generation bio-derived diesel fuels in comparison to mineral diesel," Applied Energy, Elsevier, vol. 186(P3), pages 562-573.
    9. Han, Dong & Wang, Chunhai & Duan, Yaozong & Tian, Zhisong & Huang, Zhen, 2014. "An experimental study of injection and spray characteristics of diesel and gasoline blends on a common rail injection system," Energy, Elsevier, vol. 75(C), pages 513-519.
    10. Ghorbani, Afshin & Bazooyar, Bahamin, 2012. "Optimization of the combustion of SOME (soybean oil methyl ester), B5, B10, B20 and petrodiesel in a semi industrial boiler," Energy, Elsevier, vol. 44(1), pages 217-227.
    11. Wang, Haiou & Luo, Kun & Fan, Jianren, 2012. "Direct numerical simulation and CMC (conditional moment closure) sub-model validation of spray combustion," Energy, Elsevier, vol. 46(1), pages 606-617.
    12. Costa, M. & La Villetta, M. & Massarotti, N. & Piazzullo, D. & Rocco, V., 2017. "Numerical analysis of a compression ignition engine powered in the dual-fuel mode with syngas and biodiesel," Energy, Elsevier, vol. 137(C), pages 969-979.
    13. Ludovic Lamoot & Brady Manescau & Khaled Chetehouna & Nicolas Gascoin, 2021. "Review on the Effect of the Phenomenon of Cavitation in Combustion Efficiency and the Role of Biofuels as a Solution against Cavitation," Energies, MDPI, vol. 14(21), pages 1-35, November.
    14. Aldhaidhawi, Mohanad & Chiriac, Radu & Badescu, Viorel, 2017. "Ignition delay, combustion and emission characteristics of Diesel engine fueled with rapeseed biodiesel – A literature review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 178-186.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Pachiannan, Tamilselvan & Zhong, Wenjun & Rajkumar, Sundararajan & He, Zhixia & Leng, Xianying & Wang, Qian, 2019. "A literature review of fuel effects on performance and emission characteristics of low-temperature combustion strategies," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    2. Reddy, M. Sarveshwar & Sharma, Nikhil & Agarwal, Avinash Kumar, 2016. "Effect of straight vegetable oil blends and biodiesel blends on wear of mechanical fuel injection equipment of a constant speed diesel engine," Renewable Energy, Elsevier, vol. 99(C), pages 1008-1018.
    3. Xue, Jinlin & Grift, Tony E. & Hansen, Alan C., 2011. "Effect of biodiesel on engine performances and emissions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(2), pages 1098-1116, February.
    4. Wan Ghazali, Wan Nor Maawa & Mamat, Rizalman & Masjuki, H.H. & Najafi, Gholamhassan, 2015. "Effects of biodiesel from different feedstocks on engine performance and emissions: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 585-602.
    5. Azad, A.K. & Rasul, M.G. & Khan, M.M.K. & Sharma, Subhash C. & Bhuiya, M.M.K., 2016. "Recent development of biodiesel combustion strategies and modelling for compression ignition engines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 1068-1086.
    6. Pourvosoughi, Navid & Mohammadi, Pouya & Goli, Sayed Amir Hossein & Nikbakht, Ali M. & Jafarmadar, Samad & Pakzad, Mohsen & Tabatabaei, Meisam, 2016. "Polysel: An environmental-friendly CI engine fuel," Energy, Elsevier, vol. 111(C), pages 691-700.
    7. Linhares, Felipe Nunes & Corrêa, Harrison Lourenço & Khalil, Carlos Nagib & Amorim Moreira Leite, Márcia Christina & Guimarães Furtado, Cristina Russi, 2013. "Study of the compatibility of nitrile rubber with Brazilian biodiesel," Energy, Elsevier, vol. 49(C), pages 102-106.
    8. Bueno, Andre Valente & Velásquez, José Antonio & Milanez, Luiz Fernando, 2011. "Heat release and engine performance effects of soybean oil ethyl ester blending into diesel fuel," Energy, Elsevier, vol. 36(6), pages 3907-3916.
    9. Broatch, A. & Tormos, B. & Olmeda, P. & Novella, R., 2014. "Impact of biodiesel fuel on cold starting of automotive direct injection diesel engines," Energy, Elsevier, vol. 73(C), pages 653-660.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:36:y:2011:i:6:p:3924-3932. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.