Contact information of Elsevier
Serial Information
Download restrictions: Full text for ScienceDirect subscribers only
Series handle: RePEc:eee:energy
ISSN: 0360-5442
Citations RSS feed: at CitEc
Impact factors
Access and download statisticsTop item:
Corrections
All material on this site has been provided by the respective publishers and authors. You can help
correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy. See general information about how to correct material in RePEc.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .
Content
2015, Volume 93, Issue P2
- 1308-1320 A framework for the reliability evaluation of grid-connected photovoltaic systems in the presence of intermittent faults
by Cai, Baoping & Liu, Yonghong & Ma, Yunpeng & Huang, Lei & Liu, Zengkai
- 1321-1327 Characteristics of rice husk tar secondary thermal cracking
by Zhai, Ming & Wang, Xinyu & Zhang, Yu & Dong, Peng & Qi, Guoli & Huang, Yudong
- 1328-1337 Energy efficiency of China's industry sector: An adjusted network DEA (data envelopment analysis)-based decomposition analysis
by Liu, Yingnan & Wang, Ke
- 1338-1344 Effects of clamping force on the water transport and performance of a PEM (proton electrolyte membrane) fuel cell with relative humidity and current density
by Cha, Dowon & Ahn, Jae Hwan & Kim, Hyung Soon & Kim, Yongchan
- 1345-1352 Energy harvesting from high-rise buildings by a piezoelectric harvester device
by Xie, X.D. & Wang, Q. & Wang, S.J.
- 1353-1360 Oil price crisis response: Capability assessment and key indicator identification
by Ju, Keyi & Su, Bin & Zhou, Dequn & Zhou, P. & Zhang, Yuqiang
- 1361-1372 Accounting for hidden energy dependency: The impact of energy embodied in traded goods on cross-country energy security assessments
by Bortolamedi, Markus
- 1373-1384 Modeling and simulation of a molten salt cavity receiver with Dymola
by Zhang, Qiangqiang & Li, Xin & Wang, Zhifeng & Zhang, Jinbai & El-Hefni, Baligh & Xu, Li
- 1385-1393 Research on the data transmission optimization for building energy consumption monitoring system based on fuzzy self-adaptation method
by Zhao, Liang & Zhang, Jili
- 1394-1403 Experimental investigations on using phase change material for performance improvement of storage-enhanced heat recovery room air-conditioner
by Jia, Jie & Lee, W.L.
- 1404-1412 Outdoor dry bulb heating design temperatures for Hungary
by Verbai, Zoltán & Kocsis, Imre & Kalmár, Ferenc
- 1413-1417 Microwave-assist hydrothermal synthesis and luminescence of NaGd(WO4):Tb3+ phosphors: A case study for the energy saving in the synthesis of phosphors
by Liu, Yongxin & Yue, Xuejun & Cai, Kun & Deng, Haidong & Zhang, Ming
- 1418-1425 Preference selection index approach for optimization of V down perforated baffled roughened rectangular channel
by Chamoli, Sunil
- 1426-1435 Energy economics in the manufacturing industry: A return on investment strategy
by Brundage, Michael P. & Chang, Qing & Zou, Jing & Li, Yang & Arinez, Jorge & Xiao, Guoxian
- 1436-1446 Fast pyrolysis of macroalga Saccharina japonica in a bubbling fluidized-bed reactor for bio-oil production
by Ly, Hoang Vu & Kim, Seung-Soo & Woo, Hee Chul & Choi, Jae Hyung & Suh, Dong Jin & Kim, Jinsoo
- 1447-1455 Optimizing renewable energy, demand response and energy storage to replace conventional fuels in Ontario, Canada
by Richardson, David B. & Harvey, L.D. Danny
- 1456-1466 Short-term wind speed prediction using empirical wavelet transform and Gaussian process regression
by Hu, Jianming & Wang, Jianzhou
- 1467-1477 Tracking collector consideration of tilted collector solar updraft tower power plant under Malaysia climate conditions
by Gitan, Ali Ahmed & Abdulmalek, Shaymaa Husham & Dihrab, Salwan S.
- 1478-1488 Optimization of velocity for energy saving and mitigating fouling in a crude oil preheat train with fixed network structure
by Wang, Yufei & Zhan, Shihui & Feng, Xiao
- 1489-1504 Impact of powertrain electrification, vehicle size reduction and lightweight materials substitution on energy use, CO2 emissions and cost of a passenger light-duty vehicle fleet
by González Palencia, Juan C. & Sakamaki, Tsukasa & Araki, Mikiya & Shiga, Seiichi
- 1505-1514 Rapid-compression machine studies on two-stage ignition characteristics of hydrocarbon autoignition and an investigation of new gasoline surrogates
by Chung, Jinhwa & Lee, Seunghyeon & An, Hyunsoo & Song, Soonho & Chun, Kwang Min
- 1515-1522 An improved free search differential evolution algorithm: A case study on parameters identification of one diode equivalent circuit of a solar cell module
by Hultmann Ayala, Helon Vicente & Coelho, Leandro dos Santos & Mariani, Viviana Cocco & Askarzadeh, Alireza
- 1523-1534 Theoretical and experimental investigation of a closed sorption thermal storage prototype using LiCl/water
by Yu, N. & Wang, R.Z. & Wang, L.W.
- 1535-1547 Experimental study of slight temperature rise combustion in trapped vortex combustors for gas turbines
by Zhang, R.C. & Fan, W.J. & Xing, F. & Song, S.W. & Shi, Q. & Tian, G.H. & Tan, W.L.
- 1548-1557 Energy performance and efficiency of two sugar crops for the biofuel supply chain. Perspectives for sustainable field management in southern Italy
by Garofalo, Pasquale & D'Andrea, Laura & Vonella, A. Vittorio & Rinaldi, Michele & Palumbo, A. Domenico
- 1558-1567 Appraisal of the support vector machine to forecast residential heating demand for the District Heating System based on the monthly overall natural gas consumption
by Izadyar, Nima & Ghadamian, Hossein & Ong, Hwai Chyuan & moghadam, Zeinab & Tong, Chong Wen & Shamshirband, Shahaboddin
- 1568-1580 Simulation of a multiple heat source supercritical ORC (Organic Rankine Cycle) for vehicle waste heat recovery
by Glover, Stephen & Douglas, Roy & De Rosa, Mattia & Zhang, Xiaolei & Glover, Laura
- 1581-1594 Optimal dynamic allocation of mobile plants to monetize associated or stranded natural gas, part I: Bakken shale play case study
by Tan, Siah Hong & Barton, Paul I.
- 1595-1606 Impacts of renewable energy system design inputs on the performance robustness of net zero energy buildings
by Lu, Yuehong & Wang, Shengwei & Yan, Chengchu & Shan, Kui
- 1607-1616 The tug-of-war between resource depletion and technological change in the global oil industry 1981–2009
by Lindholt, Lars
- 1617-1632 Characterising a turbine for application in an organic Rankine cycle
by Ssebabi, B. & Dobson, R.T. & Sebitosi, A.B.
- 1633-1638 Assessment of the safe operation and maintenance of photovoltaic systems
by Kamenopoulos, Sotiris N. & Tsoutsos, Theocharis
- 1639-1647 Thermodynamic analysis of a liquid air energy storage system
by Guizzi, Giuseppe Leo & Manno, Michele & Tolomei, Ludovica Maria & Vitali, Ruggero Maria
- 1648-1657 Solar pyrolysis of beech wood: Effects of pyrolysis parameters on the product distribution and gas product composition
by Zeng, Kuo & Gauthier, Daniel & Li, Rui & Flamant, Gilles
- 1658-1662 Measurements of integrated direct, diffuse and global ultraviolet-B radiation
by Utrillas, M.P. & Pedrós, R. & Gandía, S. & Gómez-Amo, J.L. & Estellés, V. & Martínez-Lozano, J.A.
- 1663-1670 Prediction of steam-assisted gravity drainage steam to oil ratio from reservoir characteristics
by Akbilgic, Oguz & Zhu, Da & Gates, Ian D. & Bergerson, Joule A.
- 1671-1683 A comparative study on prediction methods for China's medium- and long-term coal demand
by Li, Bing-Bing & Liang, Qiao-Mei & Wang, Jin-Cheng
- 1684-1692 Nanoencapsulation of n-octadecane phase change material with silica shell through interfacial hydrolysis and polycondensation in miniemulsion
by Liang, Shuen & Li, Qianbiao & Zhu, Yalin & Chen, Keping & Tian, Chunrong & Wang, Jianhua & Bai, Ruke
- 1693-1703 Optimal distribution feeder reconfiguration for increasing the penetration of plug-in electric vehicles and minimizing network costs
by Kavousi-Fard, Abdollah & Abbasi, Alireza & Rostami, Mohammad-Amin & Khosravi, Abbas
- 1704-1710 Appraisal of artificial neural network-genetic algorithm based model for prediction of the power provided by the agricultural tractors
by Taghavifar, Hamid & Mardani, Aref & Hosseinloo, Ashkan Haji
- 1711-1718 Cuckoo optimization algorithm with penalty function for combined heat and power economic dispatch problem
by Mellal, Mohamed Arezki & Williams, Edward J.
- 1719-1730 Entropy production and economic analysis in diabatic distillation columns with heat exchangers in series
by Alcántara-Avila, J.Rafael & Sotowa, Ken-Ichiro & Horikawa, Toshihide
- 1731-1741 Torrefaction of wood and bark from Eucalyptus globulus and Eucalyptus nitens: Focus on volatile evolution vs feasible temperatures
by Arteaga-Pérez, Luis E. & Segura, Cristina & Bustamante-García, Verónica & Gómez Cápiro, Oscar & Jiménez, Romel
- 1742-1747 Soybean waste (okara) as a valorization biomass for the bioethanol production
by Choi, In Seong & Kim, Young Gyu & Jung, Ja Kyun & Bae, Hyeun-Jong
- 1748-1757 Development and characterization of a new embedded ionic liquid based membrane-cathode assembly for its application in single chamber microbial fuel cells
by Ortiz-Martínez, V.M. & Salar-García, M.J. & Hernández-Fernández, F.J. & de los Ríos, A.P.
- 1758-1768 Effects of the injection strategy on the mixture formation and combustion characteristics in a DISI (direct injection spark ignition) optical engine
by Song, Jingeun & Kim, Taehoon & Jang, Jihwan & Park, Sungwook
- 1769-1777 Comparison and verification of wake models in an onshore wind farm considering single wake condition of the 2 MW wind turbine
by Jeon, Sanghyeon & Kim, Bumsuk & Huh, Jongchul
- 1778-1787 Exergy analysis of a coal/biomass co-hydrogasification based chemical looping power generation system
by Yan, Linbo & Yue, Guangxi & He, Boshu
- 1788-1803 Effect of number of supports on the bending of absorber tube of parabolic trough concentrator
by Khanna, Sourav & Sharma, Vashi
- 1804-1818 A comprehensive sensitivity study of major passive design parameters for the public rental housing development in Hong Kong
by Chen, Xi & Yang, Hongxing & Zhang, Weilong
- 1819-1831 Optimal supervisory control of steam generators operating in parallel
by Costanza, Vicente & Rivadeneira, Pablo S.
- 1832-1851 Comprehensive exergy analysis of an industrial-scale yogurt production plant
by Jafaryani Jokandan, Majid & Aghbashlo, Mortaza & Mohtasebi, Seyed Saeid
- 1852-1859 An extension of the Generalized Actuator Disc Theory for aerodynamic analysis of the diffuser-augmented wind turbines
by Liu, Yingyi & Yoshida, Shigeo
- 1860-1885 Electricity generation and heating potential from enhanced geothermal system in Songliao Basin, China: Different reservoir stimulation strategies for tight rock and naturally fractured formations
by Zhang, Yan-Jun & Guo, Liang-Liang & Li, Zheng-Wei & Yu, Zi-Wang & Xu, Tian-Fu & Lan, Cheng-Yu
- 1886-1895 Main parameters optimization of regenerative organic Rankine cycle driven by low-temperature flue gas waste heat
by Ge, Zhong & Wang, Hua & Wang, Hui-Tao & Wang, Jian-Jun & Li, Ming & Wu, Fu-Zhong & Zhang, Song-Yuan
- 1896-1903 Temperature fields induced by geothermal devices
by Ciriello, V. & Bottarelli, M. & Di Federico, V. & Tartakovsky, D.M.
- 1906-1917 Spatial modeling of lignite energy reserves for exploitation planning and quality control
by Pavlides, Andreas & Hristopulos, Dionissios T. & Roumpos, Christos & Agioutantis, Zach
- 1918-1930 Solar energy prediction and verification using operational model forecasts and ground-based solar measurements
by Kosmopoulos, P.G. & Kazadzis, S. & Lagouvardos, K. & Kotroni, V. & Bais, A.
- 1931-1942 Performance analysis of energy storage system based on liquid carbon dioxide with different configurations
by Wang, Mingkun & Zhao, Pan & Yang, Yi & Dai, Yiping
- 1943-1952 Improving OWC performance prediction using polychromatic waves
by Mitchell Ferguson, Tom & Fleming, Alan & Penesis, Irene & Macfarlane, Gregor
- 1953-1963 Investigation and modeling of the tractive performance of radial tires using off-road vehicles
by Ekinci, Şerafettin & Çarman, Kazım & Kahramanlı, Humar
- 1964-1970 Methods for evaluation of energy efficiency of machine tools
by Schudeleit, Timo & Züst, Simon & Wegener, Konrad
- 1971-1979 Effects of C3H8 on hydrate formation and dissociation for integrated CO2 capture and desalination technology
by Yang, Mingjun & Zheng, Jianan & Liu, Weiguo & Liu, Yu & Song, Yongchen
- 1980-1988 Energy efficiency of different impellers in stirred tank reactors
by Ameur, Houari
- 1989-2005 The recent change in the Italian policies for photovoltaics: Effects on the payback period and levelized cost of electricity of grid-connected photovoltaic systems installed in urban contexts
by Orioli, Aldo & Di Gangi, Alessandra
- 2006-2017 Power density optimization for micro thermoelectric generators
by Dunham, Marc T. & Barako, Michael T. & LeBlanc, Saniya & Asheghi, Mehdi & Chen, Baoxing & Goodson, Kenneth E.
- 2018-2029 Performance comparison of low-grade ORCs (organic Rankine cycles) using R245fa, pentane and their mixtures based on the thermoeconomic multi-objective optimization and decision makings
by Feng, Yongqiang & Hung, TzuChen & Zhang, Yaning & Li, Bingxi & Yang, Jinfu & Shi, Yang
- 2030-2041 Effect of mixing on the performance of wet steam ejectors
by Ariafar, Kavous & Buttsworth, David & Al-Doori, Ghassan & Malpress, Ray
- 2042-2052 Energy efficiency improvement potentials for the cement industry in Ethiopia
by Tesema, Gudise & Worrell, Ernst
- 2053-2068 Numerical study on effect of oxygen content in combustion air on ammonia combustion
by Li, Jun & Huang, Hongyu & Kobayashi, Noriyuki & He, Zhaohong & Osaka, Yugo & Zeng, Tao
- 2069-2078 A dynamic model used for controller design of a coal fired once-through boiler-turbine unit
by Liu, Ji-Zhen & Yan, Shu & Zeng, De-Liang & Hu, Yong & Lv, You
- 2079-2086 A hybrid system using a regenerative electrochemical cycle to harvest waste heat from the proton exchange membrane fuel cell
by Long, Rui & Li, Baode & Liu, Zhichun & Liu, Wei
- 2087-2101 International comparisons of energy and environmental efficiency in the road transport sector
by Ben Abdallah, Khaled & Belloumi, Mounir & De Wolf, Daniel
- 2102-2115 Effective reduction of NOx emissions of a HCCI (Homogeneous charge compression ignition) engine by enhanced rate of heat transfer under varying conditions of operation
by Karthikeya Sharma, T. & Amba Prasad Rao, G. & Madhu Murthy, K.
- 2116-2125 A novel twin-rotor radial-inflow air turbine for oscillating-water-column wave energy converters
by Falcão, António F.O. & Gato, Luís M.C. & Henriques, João C.C. & Borges, João E. & Pereiras, Bruno & Castro, Francisco
- 2126-2135 A simplified optimization model to short-term electricity planning
by Pereira, Sérgio & Ferreira, Paula & Vaz, A.I.F.
- 2136-2145 Thermodynamic and thermoeconomic optimization of an integrated gas turbine and organic Rankine cycle
by Khaljani, M. & Khoshbakhti Saray, R. & Bahlouli, K.
- 2146-2156 Parametric and optimization studies of reheat and regenerative Braysson cycle
by Chandramouli, R. & Srinivasa Rao, M.S.S. & Ramji, K.
- 2157-2165 A mechanistic semi-empirical wake interaction model for wind farm layout optimization
by Kuo, Jim Y.J. & Romero, David A. & Amon, Cristina H.
- 2166-2174 Determining efficiency of energy input for silage corn production: An econometric approach
by Houshyar, Ehsan & Zareifard, Hamid Reza & Grundmann, Philipp & Smith, Pete
- 2175-2190 Crisscross optimization algorithm for large-scale dynamic economic dispatch problem with valve-point effects
by Meng, Anbo & Hu, Hanwu & Yin, Hao & Peng, Xiangang & Guo, Zhuangzhi
- 2191-2198 Net energy analysis of Bakken crude oil production using a well-level engineering-based model
by Brandt, Adam R. & Yeskoo, Tim & Vafi, Kourosh
- 2199-2207 Improvement and experimental research of CO2 two-rolling piston expander
by Hu, Jing & Li, Minxia & Zhao, Li & Xia, Borui & Ma, Yitai
- 2208-2228 Thermoeconomic multi-objective optimization of an organic Rankine cycle for exhaust waste heat recovery of a diesel engine
by Yang, Fubin & Zhang, Hongguang & Song, Songsong & Bei, Chen & Wang, Hongjin & Wang, Enhua
- 2229-2240 A novel application for energy efficiency improvement using nanofluid in shell and tube heat exchanger equipped with helical baffles
by Bahiraei, Mehdi & Hangi, Morteza & Saeedan, Mahdi
- 2241-2250 Performance and emission characteristics of a high-compression-ratio diesel engine fueled with wood pyrolysis oil-butanol blended fuels
by Kim, Tae Young & Lee, Seokhwan & Kang, Kernyong
- 2251-2257 In-situ transesterification of Jatropha oil over an efficient solid alkali using low leaching component supported on industrial silica gel
by Qian, Kun & Shen, Xiang & Wang, Yanxin & Gao, Qiang & Ding, Hongwei
- 2258-2266 Development of high efficiency cycles for domestic refrigerator-freezer application
by Yang, Mina & Jung, Chung Woo & Kang, Yong Tae
- 2267-2279 Advanced exergy and environmental analyses and multi objective optimization of a real combined cycle power plant with supplementary firing using evolutionary algorithm
by Boyaghchi, Fateme Ahmadi & Molaie, Hanieh
- 2280-2291 Numerical investigation of the effect split injection scheme on exergy terms in an IDI (indirect injection) diesel engine by three dimensional modeling
by Jafarmadar, Samad & Nemati, Peyman
- 2292-2298 Optimal profile of heat transfer pin fins under technological constraints
by Badescu, Viorel
- 2299-2312 Reliability improvement in radial electrical distribution network by optimal planning of energy storage systems
by Saboori, Hedayat & Hemmati, Reza & Jirdehi, Mehdi Ahmadi
- 2313-2320 A novel approach for measuring bubbles uniformity and mixing efficiency in a direct contact heat exchanger
by Fei, Yu & Xiao, Qingtai & Xu, Jianxin & Pan, Jianxin & Wang, Shibo & Wang, Hua & Huang, Junwei
- 2321-2336 Economic, energy, and environmental impacts of alcohol dehydration technology on biofuel production from brown algae
by Fasahati, Peyman & Liu, J. Jay
- 2337-2350 A bottom-up and procedural calibration method for building energy simulation models based on hourly electricity submetering data
by Ji, Ying & Xu, Peng
- 2351-2362 Valuing crop diversity in biodiesel production plans
by Baglivi, Antonella & Fiorese, Giulia & Guariso, Giorgio & Uggè, Clara
- 2363-2373 Experimental study of a 1 kw organic Rankine cycle with a zeotropic mixture of R245fa/R134a
by Bamorovat Abadi, Gholamreza & Yun, Eunkoo & Kim, Kyung Chun
- 2374-2383 Modelling and testing the performance of a commercial ammonia/water absorption chiller using Aspen-Plus platform
by Mansouri, Rami & Boukholda, Ismail & Bourouis, Mahmoud & Bellagi, Ahmed
- 2384-2394 Experimental investigation of pyrolysis of rice straw using bench-scale auger, batch and fluidized bed reactors
by Nam, Hyungseok & Capareda, Sergio C. & Ashwath, Nanjappa & Kongkasawan, Jinjuta
- 2395-2405 Extended Euler–Euler model for the simulation of a 1 MWth chemical–looping pilot plant
by Alobaid, Falah & Ohlemüller, Peter & Ströhle, Jochen & Epple, Bernd
- 2406-2422 A new forecasting framework for volatile behavior in net electricity consumption: A case study in Turkey
by Tutun, Salih & Chou, Chun-An & Canıyılmaz, Erdal
- 2423-2435 The long-term forecast of Pakistan's electricity supply and demand: An application of long range energy alternatives planning
by Perwez, Usama & Sohail, Ahmed & Hassan, Syed Fahad & Zia, Usman
- 2436-2450 Synergy of air pollutants and greenhouse gas emissions of Chinese industries: A critical assessment of energy models
by Zhang, Shaohui & Worrell, Ernst & Crijns-Graus, Wina
- 2451-2466 Numerical investigation of flow characteristics, heat transfer and entropy generation of nanofluid flow inside an annular pipe partially or completely filled with porous media using two-phase mixture model
by Siavashi, Majid & Talesh Bahrami, Hamid Reza & Saffari, Hamid
- 2467-2482 A meta-heuristic method to design off-grid community electrification projects with renewable energies
by Ranaboldo, Matteo & García-Villoria, Alberto & Ferrer-Martí, Laia & Pastor Moreno, Rafael
- 2483-2496 Hydrodynamic performance prediction of a tidal current turbine operating in non-uniform inflow conditions
by O'Rourke, Fergal & Boyle, Fergal & Reynolds, Anthony & Kennedy, David M.
- 2497-2502 Performance of dry anaerobic technology in the co-digestion of rural organic solid wastes in China
by Yang, Tianxue & Li, Yingjun & Gao, Jixi & Huang, Caihong & Chen, Bin & Zhang, Lieyu & Wang, Xiaowei & Zhao, Ying & Xi, Beidou & Li, Xiang
- 2503-2517 Performance assessment of a natural gas expansion plant integrated with a vertical ground-coupled heat pump
by Ghezelbash, Reza & Farzaneh-Gord, Mahmood & Behi, Hamidreza & Sadi, Meisam & Khorramabady, Heshmatollah Shams
- 2518-2545 The chaotic global best artificial bee colony algorithm for the multi-area economic/emission dispatch
by Secui, Dinu Calin
- 2546-2558 Modeling and optimization of a network of energy hubs to improve economic and emission considerations
by Maroufmashat, Azadeh & Elkamel, Ali & Fowler, Michael & Sattari, Sourena & Roshandel, Ramin & Hajimiragha, Amir & Walker, Sean & Entchev, Evgueniy
- 2559-2567 Explicit analytic solution for heat and mass transfer in a desiccant wheel using a simplified model
by Kang, Hyungmook & Lee, Gilbong & Lee, Dae-Young
- 2568-2581 Flexible electricity tariffs: Power and energy price signals designed for a smarter grid
by Schreiber, Michael & Wainstein, Martin E. & Hochloff, Patrick & Dargaville, Roger
- 2582-2592 Two-dimensional thermosolutal natural convective heat and mass transfer in a bi-layered and inclined porous enclosure
by Hadidi, N. & Bennacer, R. & Ould-amer, Y.
- 2593-2603 Design and analysis of a dead volume control for a solar Stirling engine with induction generator
by Beltrán-Chacon, Ricardo & Leal-Chavez, Daniel & Sauceda, D. & Pellegrini-Cervantes, Manuel & Borunda, Mónica
- 2604-2613 Optimized design of impulse turbines in the micro-hydro sector concerning air detrainment processes
by Kramer, Matthias & Terheiden, Kristina & Wieprecht, Silke
- 2614-2630 A study of the impact of building geometry on the thermal performance of road pavement solar collectors
by Nasir, Diana S.N.M. & Hughes, Ben Richard & Calautit, John Kaiser
2015, Volume 93, Issue P1
- 1-9 Integration of CO2 cryogenic removal with a natural gas pressurized liquefaction process using gas expansion refrigeration
by Xiong, Xiaojun & Lin, Wensheng & Gu, Anzhong
- 10-19 Exergy loss minimization for a blast furnace with comparative analyses for energy flows and exergy flows
by Liu, Xiong & Chen, Lingen & Qin, Xiaoyong & Sun, Fengrui
- 20-30 Study on CO2 capture from molten carbonate fuel cell hybrid system integrated with oxygen ion transfer membrane
by Duan, Liqiang & Yue, Long & Qu, Wanjun & Yang, Yongping
- 31-40 Energetic and economic evaluation of Chlamydomonas reinhardtii hydrothermal liquefaction and pyrolysis through thermochemical models
by Hognon, Céline & Delrue, Florian & Boissonnet, Guillaume
- 41-56 A robust combination approach for short-term wind speed forecasting and analysis – Combination of the ARIMA (Autoregressive Integrated Moving Average), ELM (Extreme Learning Machine), SVM (Support Vector Machine) and LSSVM (Least Square SVM) forecasts using a GPR (Gaussian Process Regression) model
by Wang, Jianzhou & Hu, Jianming
- 57-66 Experimental study on the start-up with dry gases from normal cell temperatures in self-humidified proton exchange membrane fuel cells
by Kong, Im Mo & Jung, Aeri & Kim, Beom Jun & Baik, Kyung Don & Kim, Min Soo
- 67-74 Empty promises or promising futures? The case of smart grids
by Kovacic, Zora & Giampietro, Mario
- 75-87 Comparative analysis and evaluation of turbocharged Dual and Miller cycles under different operating conditions
by Zhu, Sipeng & Deng, Kangyao & Liu, Sheng & Qu, Shuan
- 88-94 Performance study of SAPO-34 and FAPO-34 desiccants for desiccant coated heat exchanger systems
by Zheng, X. & Wang, R.Z. & Ge, T.S. & Hu, L.M.
- 95-105 Efficiency improvement and CO2 emission reduction potentials in the United States petroleum refining industry
by Morrow, William R. & Marano, John & Hasanbeigi, Ali & Masanet, Eric & Sathaye, Jayant
- 106-127 Heat transfer and second law analyses of forced convection in a channel partially filled by porous media and featuring internal heat sources
by Torabi, Mohsen & Karimi, Nader & Zhang, Kaili
- 128-140 Dimensionless design approach, applicability and energy performance of stack-based hybrid ventilation for multi-story buildings
by Yang, Dong & Li, Ping
- 141-153 Heat transfer analysis of metal oxide surge arrester under power frequency applied voltage
by Seyyedbarzegar, Seyyed Meysam & Mirzaie, Mohammad
- 154-164 Entropy generation analysis of laminar flow of a nanofluid in a circular tube immersed in an isothermal external fluid
by Anand, Vishal
- 165-172 Performance analysis of a solar-powered solid state heat engine for electricity generation
by Long, Rui & Li, Baode & Liu, Zhichun & Liu, Wei
- 173-187 Design of fuzzy sliding mode controller for hydraulic turbine regulating system via input state feedback linearization method
by Yuan, Xiaohui & Chen, Zhihuan & Yuan, Yanbin & Huang, Yuehua
- 188-201 A mathematical tool for predicting thermal performance of natural draft biomass cookstoves and identification of a new operational parameter
by Kshirsagar, Milind P. & Kalamkar, Vilas R.
- 202-209 An experimental investigation on a novel ejector enhanced refrigeration cycle applied in the domestic refrigerator-freezer
by Wang, Xiao & Yu, Jianlin
- 210-219 Cyclic ultracapacitor for fast-charging and scalable energy storage system
by Yeon, Sun-Hwa & Kim, Dong-Ha & Kim, Daewi & Park, Se-Kook & Yoon, Hana & Yoo, Jungjoon & Shin, Kyoung-Hee & Jin, Chang-Soo & Lee, Yun Jung & Lee, Sang-Young
- 220-234 Multi-period analysis of heat integration measures in industrial clusters
by Bungener, Stephane & Hackl, Roman & Van Eetvelde, Greet & Harvey, Simon & Marechal, Francois
- 235-244 Optimal planning of combined heat and power systems within microgrids
by Zidan, Aboelsood & Gabbar, Hossam A. & Eldessouky, Ahmed
- 245-255 Novel activity classification and occupancy estimation methods for intelligent HVAC (heating, ventilation and air conditioning) systems
by Rana, Rajib & Kusy, Brano & Wall, Josh & Hu, Wen
- 256-265 Exergetic analysis of a brackish water reverse osmosis desalination unit with various energy recovery systems
by Qureshi, Bilal Ahmed & Zubair, Syed M.
- 266-274 Evaluation of R-1234ze(Z) as drop-in replacement for R-245fa in Organic Rankine Cycles – From thermophysical properties to cycle performance
by Petr, Philipp & Raabe, Gabriele
- 275-283 A robust demand response control of commercial buildings for smart grid under load prediction uncertainty
by Gao, Dian-ce & Sun, Yongjun & Lu, Yuehong
- 284-293 Effects of 2,5-dimethylfuran fuel properties coupling with EGR (exhaust gas recirculation) on combustion and emission characteristics in common-rail diesel engines
by Chen, Guisheng & Di, Lei & Zhang, Quanchang & Zheng, Zunqing & Zhang, Wei
- 294-308 Economic and policy evaluation of SPCC (solar-assisted post-combustion carbon capture) in Australia
by Qadir, Abdul & Carter, Lucy & Wood, Tony & Abbas, Ali
- 309-322 Nonlinear multivariable hierarchical model predictive control for boiler-turbine system
by Kong, Xiaobing & Liu, Xiangjie & Lee, Kwang Y.
- 323-334 Optimization of transit bus fleet's life cycle assessment impacts with alternative fuel options
by Ercan, Tolga & Zhao, Yang & Tatari, Omer & Pazour, Jennifer A.
- 335-342 A modified basin type solar still: Experimental performance and economic study
by Ibrahim, Ayman G.M. & Allam, Elsayed E. & Elshamarka, Salman E.
- 343-353 Chemical storage of wind energy by renewable methanol production: Feasibility analysis using a multi-criteria decision matrix
by Matzen, Michael & Alhajji, Mahdi & Demirel, Yaşar
- 354-360 Influence of thermal shock on fouling of smooth, rough and finned tubes
by Bishara, E. & Abd-Elhady, M.S. & Halim, M.A.
- 361-371 Fuel poverty, affordability, and energy justice in England: Policy insights from the Warm Front Program
by Sovacool, Benjamin K.
- 372-382 A comparison of simulated annealing schedules for constructal design of complex cavities intruded into conductive walls with internal heat generation
by Gonzales, G.V. & Estrada, E. da S.D. & Emmendorfer, L.R. & Isoldi, L.A. & Xie, G. & Rocha, L.A.O. & dos Santos, E.D.
- 383-392 Effects of direct injection timing and premixed ratio on combustion and emissions characteristics of RCCI (Reactivity Controlled Compression Ignition) with N-heptane/gasoline-like fuels
by Zhu, Lifeng & Qian, Yong & Wang, Xiaole & Lu, Xingcai
- 393-405 Challenges in load balance due to renewable energy sources penetration: The possible role of energy storage technologies relative to the Italian case
by Barelli, L. & Desideri, U. & Ottaviano, A.
- 406-415 Accurate assessment of the output energy from the doubly fed induction generators
by El-Kharashi, Eyhab & Farid, Azmy Wadie
- 416-420 Analytical insight into the oxygen diffusion in wetted porous cathodes of Li-air batteries
by Ye, Luhan & Wang, Xiaoning & Lv, Weiqiang & Fei, Jipeng & Zhu, Gaolong & Liang, Yachun & Song, Yuanqiang & Zhai, Junyi & He, Weidong
- 421-434 Assessment of the energy and exergy efficiencies of farm to fork grain cultivation and bread making processes in Turkey and Germany
by Degerli, Bahar & Nazir, Serap & Sorgüven, Esra & Hitzmann, Bernd & Özilgen, Mustafa
- 435-441 Fabrication of Co3O4@Co–Ni sulfides core/shell nanowire arrays as binder-free electrode for electrochemical energy storage
by Hong, Wei & Wang, Jinqing & Li, Zhangpeng & Yang, Shengrong
- 442-450 Extinction limits and structure of counterflow nonpremixed H2O-laden CH4/air flames
by Lee, Seungro & Padilla, Rosa & Dunn-Rankin, Derek & Pham, Trinh & Kwon, Oh Chae
- 451-457 Experimental researches on hydrogen generation by aluminum with adding lithium at high temperature
by Yang, Weijuan & Zhang, Tianyou & Liu, Jianzhong & Wang, Zhihua & Zhou, Junhu & Cen, Kefa
- 458-465 Modeling of combustion of gas oil and natural gas in a furnace: Comparison of combustion characteristics
by Azimi, Seyyed Shahabeddin & Namazi, Mohammad Hosain
- 466-483 A review of geothermal energy resources, development, and applications in China: Current status and prospects
by Zhu, Jialing & Hu, Kaiyong & Lu, Xinli & Huang, Xiaoxue & Liu, Ketao & Wu, Xiujie
- 484-494 Recuperated power cycle analysis model: Investigation and optimisation of low-to-moderate resource temperature Organic Rankine Cycles
by de M. Ventura, Carlos A. & Rowlands, Andrew S.
- 495-510 Regional total-factor energy efficiency and electricity saving potential of manufacturing industry in Turkey
by Özkara, Yücel & Atak, Mehmet
- 511-520 Experimental investigation of the effect of compression ratio, injection timing & pressure in a DI (direct injection) diesel engine running on carbon black-water-diesel emulsion
by Wamankar, Arun Kumar & Satapathy, Ashok Kumar & Murugan, S.
- 521-533 Ship weight reduction and efficiency enhancement through combined power cycles
by Rivera-Alvarez, Alejandro & Coleman, Michael J. & Ordonez, Juan C.
- 534-543 Small and flat worlds: A complex network analysis of international trade in crude oil
by Yang, Yu & Poon, Jessie P.H. & Liu, Yi & Bagchi-Sen, Sharmistha
- 544-554 Screening of supported and unsupported Mn–Si oxygen carriers for CLOU (chemical-looping with oxygen uncoupling)
by Frick, Volkmar & Rydén, Magnus & Leion, Henrik & Mattisson, Tobias & Lyngfelt, Anders
- 555-567 Exergoeconomic analysis and optimization of a triple-pressure combined cycle plant using evolutionary algorithm
by Bakhshmand, Sina Kazemi & Saray, Rahim Khoshbakhti & Bahlouli, Keyvan & Eftekhari, Hajar & Ebrahimi, Afshin
- 568-579 Effect of a glycerol-derived advanced biofuel –FAGE (fatty acid formal glycerol ester)– on the emissions of a diesel engine tested under the New European Driving Cycle
by Lapuerta, Magín & Rodríguez-Fernández, José & García-Contreras, Reyes
- 580-588 Iterative Bass Model forecasts for unconventional oil production in the Eagle Ford Shale
by Tunstall, Thomas
- 589-598 China's photovoltaic power development under policy incentives: A system dynamics analysis
by Guo, Xiaodan & Guo, Xiaopeng
- 599-605 Mass transport optimization in the anode diffusion layer of a micro direct methanol fuel cell
by Yuan, Zhenyu & Yang, Jie & Zhang, Yufeng & Wang, Shikai & Xu, Tingnian
- 606-612 The assessment of Virginia mallow (Sida hermaphrodita Rusby) and cup plant (Silphium perfoliatum L.) productivity, physico–mechanical properties and energy expenses
by Šiaudinis, Gintaras & Jasinskas, Algirdas & Šarauskis, Egidijus & Steponavičius, Dainius & Karčauskienė, Danutė & Liaudanskienė, Inga
- 613-624 Effect of temperature, suction head and flow velocity on cavitation in a Francis turbine of small hydro power plant
by Gohil, Pankaj P. & Saini, R.P.
- 625-630 The hydrogen storage properties of MgH2–Fe3S4 composites
by Zhang, Wei & Cheng, Ying & Han, Da & Han, Shumin
- 631-640 On flame propagation in narrow channels with enhanced wall thermal conduction
by Veeraragavan, Ananthanarayanan
- 641-654 Energy–exergy analysis and optimisation of a model sugar factory in Turkey
by Taner, Tolga & Sivrioglu, Mecit
- 655-671 Hourly electricity consumption in Norwegian households – Assessing the impacts of different heating systems
by Kipping, A. & Trømborg, E.
- 672-682 Prospects for bioenergy use in Ghana using Long-range Energy Alternatives Planning model
by Kemausuor, Francis & Nygaard, Ivan & Mackenzie, Gordon
- 683-696 Wave energy resource assessment in Uruguay
by Alonso, Rodrigo & Solari, Sebastián & Teixeira, Luis
- 697-704 Biomethane and biocrude oil production from protein extracted residual Spirulina platensis
by Parimi, Naga Sirisha & Singh, Manjinder & Kastner, James R. & Das, Keshav C.
- 705-715 Certification prerequisites for activities related to the trading of demand response resources
by Alcázar-Ortega, Manuel & Calpe, Carmen & Theisen, Thomas & Rodríguez-García, Javier
- 716-729 Exergy analysis of a turbofan engine for an unmanned aerial vehicle during a surveillance mission
by Şöhret, Yasin & Dinç, Ali & Karakoç, T. Hikmet
- 730-739 Exergy analysis of biohydrogen production from various carbon sources via anaerobic photosynthetic bacteria (Rhodospirillum rubrum)
by Hosseini, Seyed Sina & Aghbashlo, Mortaza & Tabatabaei, Meisam & Younesi, Habibollah & Najafpour, Ghasem
- 740-748 Exergy analysis of combustion in VGT-modified diesel engine with detailed chemical kinetics mechanism
by Taghavifar, Hadi & Khalilarya, Shahram & Jafarmadar, Samad
- 749-757 The effect of different co-catalysts (CuO, MoS2 and Pt) on hydrogen production of Er3+:YAlO3/NaTaO3 by visible-light-induced methanol splitting
by Lu, Chunxiao & Chen, Yang & Li, Yun & Ma, Chunhong & Guo, Yuwei & Li, Ying & Wang, Jun
- 758-769 Experimental investigations on thermal performance of phase change material – Trombe wall system enhanced by delta winglet vortex generators
by Zhou, Guobing & Pang, Mengmeng
- 770-785 Novel inlet air cooling with gas turbine engines using cascaded waste-heat recovery for green sustainable energy
by Najjar, Yousef S.H. & Abubaker, Ahmad M. & El-Khalil, Ahmad F.S.
- 786-794 Study on adsorption refrigeration performance of MIL-101-isobutane working pair
by Ma, Liejun & Yang, Huan & Wu, Qi & Yin, Yu & Liu, Zongjian & Cui, Qun & Wang, Haiyan
- 795-800 Application of the Miller cycle and turbo charging into a diesel engine to improve performance and decrease NO emissions
by Gonca, Guven & Sahin, Bahri & Parlak, Adnan & Ayhan, Vezir & Cesur, İdris & Koksal, Sakip
- 801-815 Modeling and performance analysis of CCHP (combined cooling, heating and power) system based on co-firing of natural gas and biomass gasification gas
by Wang, Jiangjiang & Mao, Tianzhi & Sui, Jun & Jin, Hongguang
- 816-827 Security constrained optimal power flow solution of wind-thermal generation system using modified bacteria foraging algorithm
by Panda, Ambarish & Tripathy, M.
- 828-853 Thermoacoustic prime movers and refrigerators: Thermally powered engines without moving components
by Jin, Tao & Huang, Jiale & Feng, Ye & Yang, Rui & Tang, Ke & Radebaugh, Ray
- 854-863 Experimental study of direct contact vaporization heat transfer on n-pentane-water flowing interface
by Wang, Yiping & Fu, Hailing & Huang, Qunwu & Cui, Yong & Sun, Yong & Jiang, Lihong
- 864-873 Assessment of municipal solid wastes gasification in a semi-industrial gasifier using syngas quality indices
by Couto, Nuno Dinis & Silva, Valter Bruno & Monteiro, Eliseu & Rouboa, Abel
- 874-881 Evaluating the cooling performance of crushed-rock interlayer embankments with unperforated and perforated ventilation ducts in permafrost regions
by Zhang, Mingyi & Zhang, Xiyin & Li, Shuangyang & Wu, Daoyong & Pei, Wansheng & Lai, Yuanming
- 882-899 Improving performance of two-phase natural circulation loops by reducing of entropy generation
by Goudarzi, N. & Talebi, S.
- 900-907 An efficient strategy exploiting the waste heat in a solid oxide fuel cell system
by Wang, Yuan & Cai, Ling & Liu, Tie & Wang, Junyi & Chen, Jincan
- 908-922 Artificial neural network modeling of a photovoltaic-thermal evaporator of solar assisted heat pumps
by Gunasekar, N. & Mohanraj, M. & Velmurugan, V.