IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v93y2015ip2p2146-2156.html
   My bibliography  Save this article

Parametric and optimization studies of reheat and regenerative Braysson cycle

Author

Listed:
  • Chandramouli, R.
  • Srinivasa Rao, M.S.S.
  • Ramji, K.

Abstract

A detailed parametric and optimization studies of reheat and regenerative Braysson cycle has been carried out. The effect of compressor and turbine inlet temperatures, temperature rise in a stage of multi-stage compression, individual component efficiencies and exit pressure of reheat turbine on the performance has been studied. The effect of perfect cooling after regeneration leads to a gain of 7.4% in maximum exergy efficiency and 20% in maximum power output. A computer programme has been developed to evaluate the optimum pressure ratio for minimum specific fuel consumption and maximum power output. It is interesting to note that the optimum pressure ratio for maximum power output and minimum specific fuel consumption are different and they vary by a wide margin. It has been further seen that this optimum pressure ratio is a function of turbine inlet temperature. A thermodynamic system will have degeneracy in operational effectiveness with the decrease in component efficiencies due to aging. Hence the variations of optimum pressure ratio with component efficiencies are also studied and reported in this work. To make the system economically viable, it has been recommended to design the system for the operating condition of minimum specific fuel consumption rather than for maximum power output.

Suggested Citation

  • Chandramouli, R. & Srinivasa Rao, M.S.S. & Ramji, K., 2015. "Parametric and optimization studies of reheat and regenerative Braysson cycle," Energy, Elsevier, vol. 93(P2), pages 2146-2156.
    • Handle: RePEc:eee:energy:v:93:y:2015:i:p2:p:2146-2156
    DOI: 10.1016/j.energy.2015.10.087
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544215014553
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2015.10.087?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Bahlouli, K. & Khoshbakhti Saray, R. & Sarabchi, N., 2015. "Parametric investigation and thermo-economic multi-objective optimization of an ammonia–water power/cooling cycle coupled with an HCCI (homogeneous charge compression ignition) engine," Energy, Elsevier, vol. 86(C), pages 672-684.
    2. Babaelahi, Mojtaba & Sayyaadi, Hoseyn, 2015. "A new thermal model based on polytropic numerical simulation of Stirling engines," Applied Energy, Elsevier, vol. 141(C), pages 143-159.
    3. Roy, J.P. & Misra, Ashok, 2012. "Parametric optimization and performance analysis of a regenerative Organic Rankine Cycle using R-123 for waste heat recovery," Energy, Elsevier, vol. 39(1), pages 227-235.
    4. Kosmadakis, G. & Manolakos, D. & Papadakis, G., 2010. "Parametric theoretical study of a two-stage solar organic Rankine cycle for RO desalination," Renewable Energy, Elsevier, vol. 35(5), pages 989-996.
    5. Zhang, Yue & Lin, Bihong & Chen, Jincan, 2007. "Optimum performance characteristics of an irreversible solar-driven Brayton heat engine at the maximum overall efficiency," Renewable Energy, Elsevier, vol. 32(5), pages 856-867.
    6. Wu, Lanmei & Lin, Guoxing & Chen, Jincan, 2010. "Parametric optimization of a solar-driven Braysson heat engine with variable heat capacity of the working fluid and radiation–convection heat losses," Renewable Energy, Elsevier, vol. 35(1), pages 95-100.
    7. Roy, J.P. & Mishra, M.K. & Misra, Ashok, 2010. "Parametric optimization and performance analysis of a waste heat recovery system using Organic Rankine Cycle," Energy, Elsevier, vol. 35(12), pages 5049-5062.
    8. Creyx, M. & Delacourt, E. & Morin, C. & Desmet, B. & Peultier, P., 2013. "Energetic optimization of the performances of a hot air engine for micro-CHP systems working with a Joule or an Ericsson cycle," Energy, Elsevier, vol. 49(C), pages 229-239.
    9. Wang, Z.Q. & Zhou, N.J. & Guo, J. & Wang, X.Y., 2012. "Fluid selection and parametric optimization of organic Rankine cycle using low temperature waste heat," Energy, Elsevier, vol. 40(1), pages 107-115.
    10. Rashidi, M.M. & Galanis, N. & Nazari, F. & Basiri Parsa, A. & Shamekhi, L., 2011. "Parametric analysis and optimization of regenerative Clausius and organic Rankine cycles with two feedwater heaters using artificial bees colony and artificial neural network," Energy, Elsevier, vol. 36(9), pages 5728-5740.
    11. Rahbar, Kiyarash & Mahmoud, Saad & Al-Dadah, Raya K. & Moazami, Nima, 2015. "Parametric analysis and optimization of a small-scale radial turbine for Organic Rankine Cycle," Energy, Elsevier, vol. 83(C), pages 696-711.
    12. Zheng, Shiyan & Chen, Jincan & Lin, Guoxing, 2005. "Performance characteristics of an irreversible solar-driven Braysson heat engine at maximum efficiency," Renewable Energy, Elsevier, vol. 30(4), pages 601-610.
    13. Shu, Gequn & Zhao, Jian & Tian, Hua & Liang, Xingyu & Wei, Haiqiao, 2012. "Parametric and exergetic analysis of waste heat recovery system based on thermoelectric generator and organic rankine cycle utilizing R123," Energy, Elsevier, vol. 45(1), pages 806-816.
    14. Yang, Puqing & Zhang, Houcheng, 2015. "Parametric analysis of an irreversible proton exchange membrane fuel cell/absorption refrigerator hybrid system," Energy, Elsevier, vol. 85(C), pages 458-467.
    15. Xi, Huan & Li, Ming-Jia & Xu, Chao & He, Ya-Ling, 2013. "Parametric optimization of regenerative organic Rankine cycle (ORC) for low grade waste heat recovery using genetic algorithm," Energy, Elsevier, vol. 58(C), pages 473-482.
    16. Wang, Jiangfeng & Dai, Yiping & Zhang, Taiyong & Ma, Shaolin, 2009. "Parametric analysis for a new combined power and ejector–absorption refrigeration cycle," Energy, Elsevier, vol. 34(10), pages 1587-1593.
    17. Chandramouli, R. & Srinivasa Rao, M.S.S. & Ramji, K., 2015. "Energy and exergy based thermodynamic analysis of reheat and regenerative Braysson cycle," Energy, Elsevier, vol. 90(P2), pages 1848-1858.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Tian, Zhitao & Zheng, Qun & Jiang, Bin, 2018. "Effect of Reynolds number on supercritical helium axial compressor rotors performance in closed Brayton cycle," Energy, Elsevier, vol. 145(C), pages 217-227.
    2. Ahmadi, Mohammad H. & Jokar, Mohammad Ali & Ming, Tingzhen & Feidt, Michel & Pourfayaz, Fathollah & Astaraei, Fatemeh Razi, 2018. "Multi-objective performance optimization of irreversible molten carbonate fuel cell–Braysson heat engine and thermodynamic analysis with ecological objective approach," Energy, Elsevier, vol. 144(C), pages 707-722.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bao, Junjiang & Zhao, Li, 2013. "A review of working fluid and expander selections for organic Rankine cycle," Renewable and Sustainable Energy Reviews, Elsevier, vol. 24(C), pages 325-342.
    2. He, Chao & Liu, Chao & Zhou, Mengtong & Xie, Hui & Xu, Xiaoxiao & Wu, Shuangying & Li, Yourong, 2014. "A new selection principle of working fluids for subcritical organic Rankine cycle coupling with different heat sources," Energy, Elsevier, vol. 68(C), pages 283-291.
    3. Le Roux, W.G. & Bello-Ochende, T. & Meyer, J.P., 2013. "A review on the thermodynamic optimisation and modelling of the solar thermal Brayton cycle," Renewable and Sustainable Energy Reviews, Elsevier, vol. 28(C), pages 677-690.
    4. Lee, Ung & Kim, Kyeongsu & Han, Chonghun, 2014. "Design and optimization of multi-component organic rankine cycle using liquefied natural gas cryogenic exergy," Energy, Elsevier, vol. 77(C), pages 520-532.
    5. Yang, Fubin & Zhang, Hongguang & Song, Songsong & Bei, Chen & Wang, Hongjin & Wang, Enhua, 2015. "Thermoeconomic multi-objective optimization of an organic Rankine cycle for exhaust waste heat recovery of a diesel engine," Energy, Elsevier, vol. 93(P2), pages 2208-2228.
    6. Hongjin Wang & Hongguang Zhang & Fubin Yang & Songsong Song & Ying Chang & Chen Bei & Kai Yang, 2015. "Parametric Optimization of Regenerative Organic Rankine Cycle System for Diesel Engine Based on Particle Swarm Optimization," Energies, MDPI, vol. 8(9), pages 1-26, September.
    7. Li, Tailu & Yuan, Zhenhe & Li, Wei & Yang, Junlan & Zhu, Jialing, 2016. "Strengthening mechanisms of two-stage evaporation strategy on system performance for organic Rankine cycle," Energy, Elsevier, vol. 101(C), pages 532-540.
    8. Ge, Zhong & Wang, Hua & Wang, Hui-Tao & Wang, Jian-Jun & Li, Ming & Wu, Fu-Zhong & Zhang, Song-Yuan, 2015. "Main parameters optimization of regenerative organic Rankine cycle driven by low-temperature flue gas waste heat," Energy, Elsevier, vol. 93(P2), pages 1886-1895.
    9. Wang, Jiangfeng & Yan, Zhequan & Wang, Man & Ma, Shaolin & Dai, Yiping, 2013. "Thermodynamic analysis and optimization of an (organic Rankine cycle) ORC using low grade heat source," Energy, Elsevier, vol. 49(C), pages 356-365.
    10. Zhang, Hong-Hu & Xi, Huan & He, Ya-Ling & Zhang, Yu-Wen & Ning, Bo, 2019. "Experimental study of the organic rankine cycle under different heat and cooling conditions," Energy, Elsevier, vol. 180(C), pages 678-688.
    11. Li, Tailu & Zhang, Zhigang & Lu, Jian & Yang, Junlan & Hu, Yujie, 2015. "Two-stage evaporation strategy to improve system performance for organic Rankine cycle," Applied Energy, Elsevier, vol. 150(C), pages 323-334.
    12. Feng, Yongqiang & Zhang, Yaning & Li, Bingxi & Yang, Jinfu & Shi, Yang, 2015. "Sensitivity analysis and thermoeconomic comparison of ORCs (organic Rankine cycles) for low temperature waste heat recovery," Energy, Elsevier, vol. 82(C), pages 664-677.
    13. Martelli, Emanuele & Capra, Federico & Consonni, Stefano, 2015. "Numerical optimization of Combined Heat and Power Organic Rankine Cycles – Part A: Design optimization," Energy, Elsevier, vol. 90(P1), pages 310-328.
    14. Li, Tailu & Wang, Qiulin & Zhu, Jialing & Hu, Kaiyong & Fu, Wencheng, 2015. "Thermodynamic optimization of organic Rankine cycle using two-stage evaporation," Renewable Energy, Elsevier, vol. 75(C), pages 654-664.
    15. Zhang, Jianhua & Zhou, Yeli & Wang, Rui & Xu, Jinliang & Fang, Fang, 2014. "Modeling and constrained multivariable predictive control for ORC (Organic Rankine Cycle) based waste heat energy conversion systems," Energy, Elsevier, vol. 66(C), pages 128-138.
    16. Li, Tailu & Zhu, Jialing & Hu, Kaiyong & Kang, Zhenhua & Zhang, Wei, 2014. "Implementation of PDORC (parallel double-evaporator organic Rankine cycle) to enhance power output in oilfield," Energy, Elsevier, vol. 68(C), pages 680-687.
    17. Kim, Dong Kyu & Lee, Ji Sung & Kim, Jinwoo & Kim, Mo Se & Kim, Min Soo, 2017. "Parametric study and performance evaluation of an organic Rankine cycle (ORC) system using low-grade heat at temperatures below 80°C," Applied Energy, Elsevier, vol. 189(C), pages 55-65.
    18. Yang, Min-Hsiung & Yeh, Rong-Hua, 2015. "Thermo-economic optimization of an organic Rankine cycle system for large marine diesel engine waste heat recovery," Energy, Elsevier, vol. 82(C), pages 256-268.
    19. Li, Tailu & Fu, Wencheng & Zhu, Jialing, 2014. "An integrated optimization for organic Rankine cycle based on entransy theory and thermodynamics," Energy, Elsevier, vol. 72(C), pages 561-573.
    20. Braimakis, Konstantinos & Karellas, Sotirios, 2017. "Integrated thermoeconomic optimization of standard and regenerative ORC for different heat source types and capacities," Energy, Elsevier, vol. 121(C), pages 570-598.

    More about this item

    Keywords

    Braysson; Reheat; Regeneration; SFC; NDPO;
    All these keywords.

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:93:y:2015:i:p2:p:2146-2156. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.