IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v93y2015ip2p1719-1730.html
   My bibliography  Save this article

Entropy production and economic analysis in diabatic distillation columns with heat exchangers in series

Author

Listed:
  • Alcántara-Avila, J.Rafael
  • Sotowa, Ken-Ichiro
  • Horikawa, Toshihide

Abstract

Distillation columns with adiabatic stages inherently entail high entropy production because heat is only supplied to the reboiler and removed from the condenser. DDC (Diabatic distillation columns) can reduce the entropy production and they can be realized through the installation of heat exchangers in series at the stages in the column by circulating a cooling fluid in the rectifying section from the condenser and by circulating a heating fluid in the stripping section from the reboiler. Although the diabatization of stages can effectively reduce the entropy production, it can cause an increase in the equipment cost because more heat exchanges are installed and in the operation cost because the total heat load supplied or removed in the diabatic column is higher than that in the adiabatic column. In this work, the entropy production and economic (i.e., total annual cost) criteria are assessed for diabatic distillation columns. A solution procedure that combines numerical analysis and rigorous simulations is proposed. For the presented examples, the existence of a trade-off between entropy production and total annual cost was demonstrated.

Suggested Citation

  • Alcántara-Avila, J.Rafael & Sotowa, Ken-Ichiro & Horikawa, Toshihide, 2015. "Entropy production and economic analysis in diabatic distillation columns with heat exchangers in series," Energy, Elsevier, vol. 93(P2), pages 1719-1730.
  • Handle: RePEc:eee:energy:v:93:y:2015:i:p2:p:1719-1730
    DOI: 10.1016/j.energy.2015.09.129
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544215013559
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2015.09.129?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kim, Young Han, 2014. "Application of partially diabatic divided wall column to floating liquefied natural gas plant," Energy, Elsevier, vol. 70(C), pages 435-443.
    2. Johannessen, Eivind & Røsjorde, Audun, 2007. "Equipartition of entropy production as an approximation to the state of minimum entropy production in diabatic distillation," Energy, Elsevier, vol. 32(4), pages 467-473.
    3. de Koeijer, Gelein & Røsjorde, Audun & Kjelstrup, Signe, 2004. "Distribution of heat exchange in optimum diabatic distillation columns," Energy, Elsevier, vol. 29(12), pages 2425-2440.
    4. Shu, Liwei & Chen, Lingen & Sun, Fengrui, 2007. "Performance optimization of a diabatic distillation-column by allocating a sequential heat-exchanger inventory," Applied Energy, Elsevier, vol. 84(9), pages 893-903, September.
    5. Rivero, R. & Garcia, M. & Urquiza, J., 2004. "Simulation, exergy analysis and application of diabatic distillation to a tertiary amyl methyl ether production unit of a crude oil refinery," Energy, Elsevier, vol. 29(3), pages 467-489.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Jana, Amiya K., 2016. "A new divided-wall heat integrated distillation column (HIDiC) for batch processing: Feasibility and analysis," Applied Energy, Elsevier, vol. 172(C), pages 199-206.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Nguyen, Nghi & Demirel, Yaşar, 2010. "Retrofit of distillation columns in biodiesel production plants," Energy, Elsevier, vol. 35(4), pages 1625-1632.
    2. Zhang, Xiaosong & Han, Wei & Hong, Hui & Jin, Hongguang, 2009. "A chemical intercooling gas turbine cycle with chemical-looping combustion," Energy, Elsevier, vol. 34(12), pages 2131-2136.
    3. Khoa, T.D. & Shuhaimi, M. & Hashim, H. & Panjeshahi, M.H., 2010. "Optimal design of distillation column using three dimensional exergy analysis curves," Energy, Elsevier, vol. 35(12), pages 5309-5319.
    4. Khoa, T.D. & Shuhaimi, M. & Nam, H.M., 2012. "Application of three dimensional exergy analysis curves for absorption columns," Energy, Elsevier, vol. 37(1), pages 273-280.
    5. Jana, Amiya K., 2016. "A new divided-wall heat integrated distillation column (HIDiC) for batch processing: Feasibility and analysis," Applied Energy, Elsevier, vol. 172(C), pages 199-206.
    6. Qyyum, Muhammad Abdul & Qadeer, Kinza & Minh, Le Quang & Haider, Junaid & Lee, Moonyong, 2019. "Nitrogen self-recuperation expansion-based process for offshore coproduction of liquefied natural gas, liquefied petroleum gas, and pentane plus," Applied Energy, Elsevier, vol. 235(C), pages 247-257.
    7. Johannessen, Eivind & Røsjorde, Audun, 2007. "Equipartition of entropy production as an approximation to the state of minimum entropy production in diabatic distillation," Energy, Elsevier, vol. 32(4), pages 467-473.
    8. Xia, Shaojun & Chen, Lingen & Sun, Fengrui, 2011. "Power-optimization of non-ideal energy converters under generalized convective heat transfer law via Hamilton-Jacobi-Bellman theory," Energy, Elsevier, vol. 36(1), pages 633-646.
    9. Xiong, Xiaojun & Lin, Wensheng & Gu, Anzhong, 2015. "Integration of CO2 cryogenic removal with a natural gas pressurized liquefaction process using gas expansion refrigeration," Energy, Elsevier, vol. 93(P1), pages 1-9.
    10. Silva, J.A.M. & Oliveira, S., 2014. "An exergy-based approach to determine production cost and CO2 allocation in refineries," Energy, Elsevier, vol. 67(C), pages 607-616.
    11. Hessam Golmohamadi & Amin Asadi, 2020. "Integration of Joint Power-Heat Flexibility of Oil Refinery Industries to Uncertain Energy Markets," Energies, MDPI, vol. 13(18), pages 1-25, September.
    12. Sun, Chongzheng & Li, Yuxing & Han, Hui & Zhu, Jianlu & Wang, Shaowei & Liu, Liang, 2019. "Experimental and numerical simulation study on the offshore adaptability of spiral wound heat exchanger in LNG-FPSO DMR natural gas liquefaction process," Energy, Elsevier, vol. 189(C).
    13. Shu, Liwei & Chen, Lingen & Sun, Fengrui, 2007. "Performance optimization of a diabatic distillation-column by allocating a sequential heat-exchanger inventory," Applied Energy, Elsevier, vol. 84(9), pages 893-903, September.
    14. Kim, Young Han, 2014. "Application of partially diabatic divided wall column to floating liquefied natural gas plant," Energy, Elsevier, vol. 70(C), pages 435-443.
    15. Arikoglu, Aytac & Ozkol, Ibrahim & Komurgoz, Guven, 2008. "Effect of slip on entropy generation in a single rotating disk in MHD flow," Applied Energy, Elsevier, vol. 85(12), pages 1225-1236, December.
    16. Chen, Ting & Zhang, Bingjian & Chen, Qinglin, 2014. "Heat integration of fractionating systems in para-xylene plants based on column optimization," Energy, Elsevier, vol. 72(C), pages 311-321.
    17. Jana, Amiya K., 2010. "Heat integrated distillation operation," Applied Energy, Elsevier, vol. 87(5), pages 1477-1494, May.
    18. Tadros, M. & Ventura, M. & Guedes Soares, C., 2019. "Optimization procedure to minimize fuel consumption of a four-stroke marine turbocharged diesel engine," Energy, Elsevier, vol. 168(C), pages 897-908.
    19. Blahušiak, M. & Kiss, A.A. & Kersten, S.R.A. & Schuur, B., 2016. "Quick assessment of binary distillation efficiency using a heat engine perspective," Energy, Elsevier, vol. 116(P1), pages 20-31.
    20. Li, Q.Y. & Wang, L. & Ju, Y.L., 2011. "Analysis of flammability limits for the liquefaction process of oxygen-bearing coal-bed methane," Applied Energy, Elsevier, vol. 88(9), pages 2934-2939.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:93:y:2015:i:p2:p:1719-1730. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.