Contact information of Elsevier
Serial Information
Download restrictions: Full text for ScienceDirect subscribers only
Series handle: RePEc:eee:energy
ISSN: 0360-5442
Citations RSS feed: at CitEc
Impact factors
Access and download statisticsTop item:
Corrections
All material on this site has been provided by the respective publishers and authors. You can help
correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy. See general information about how to correct material in RePEc.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .
Content
2014, Volume 74, Issue C
- 340-345 A study on current characteristics of induction motor while operating at its base frequency in textile industry
by Dhayaneswaran, Y. & Ashok Kumar, L.
- 346-358 Computational and experimental study of a complete heat dissipation system using water as heat carrier placed on a thermoelectric generator
by Aranguren, Patricia & Astrain, David & Pérez, Miren Gurutze
- 359-367 Fuzzy logic home energy consumption modeling for residential photovoltaic plant sizing in the new Italian scenario
by Ciabattoni, Lucio & Grisostomi, Massimo & Ippoliti, Gianluca & Longhi, Sauro
- 368-373 Relaxation effect analysis on the initial state of charge for LiNi0.5Co0.2Mn0.3O2/graphite battery
by Yanhui, Zhang & Wenji, Song & Guoqing, Xu
- 374-388 A novel MPPT (maximum power point tracking) algorithm based on a modified genetic algorithm specialized on tracking the global maximum power point in photovoltaic systems affected by partial shading
by Daraban, Stefan & Petreus, Dorin & Morel, Cristina
- 389-395 Start-up strategies for thermophilic anaerobic digestion of pig manure
by Moset, V. & Bertolini, E. & Cerisuelo, A. & Cambra, M. & Olmos, A. & Cambra-López, M.
- 396-404 Multi-objective optimization of an underwater compressed air energy storage system using genetic algorithm
by Cheung, Brian C. & Carriveau, Rupp & Ting, David S.K.
- 405-416 Analysis of impact factors on China's CO2 emissions from the view of supply chain paths
by Gui, Shusen & Mu, Hailin & Li, Nan
- 417-427 Study on a gas-steam combined cycle system with CO2 capture by integrating molten carbonate fuel cell
by Duan, Liqiang & Zhu, Jingnan & Yue, Long & Yang, Yongping
- 428-438 Study of mixtures based on hydrocarbons used in ORC (Organic Rankine Cycle) for engine waste heat recovery
by Shu, Gequn & Gao, Yuanyuan & Tian, Hua & Wei, Haiqiao & Liang, Xingyu
- 439-446 Fossil & renewable energy consumption, GHGs (greenhouse gases) and economic growth: Evidence from a panel of EU (European Union) countries
by Bölük, Gülden & Mert, Mehmet
- 447-454 Studies on preparation and adaptive thermal control performance of novel PTC (positive temperature coefficient) materials with controllable Curie temperatures
by Cheng, Wen-long & Yuan, Shuai & Song, Jia-liang
- 455-463 Modelling future uptake of distributed energy resources under alternative tariff structures
by Higgins, Andrew & Grozev, George & Ren, Zhengen & Garner, Stephen & Walden, Glenn & Taylor, Michelle
- 464-470 Structural features and gasification reactivity of coal chars formed in Ar and CO2 atmospheres at elevated pressures
by Bai, Yonghui & Wang, Yulong & Zhu, Shenghua & Li, Fan & Xie, Kechang
- 471-483 Exergy driven process synthesis for isoflavone recovery from okara
by Jankowiak, Lena & Jonkman, Jochem & Rossier-Miranda, Francisco J. & van der Goot, Atze Jan & Boom, Remko M.
- 484-493 A numerical method for the efficient design of free opening hoods in industrial and domestic applications
by Pinelli, Michele & Suman, Alessio
- 494-505 Optimization of peak loads among multiple provincial power grids under a central dispatching authority
by Shen, Jianjian & Cheng, Chuntian & Wu, Xinyu & Cheng, Xiong & Li, Weidong & Lu, Jianyu
- 506-517 Numerical simulation and experimental validation of the turbulent flow around a small incurved Savonius wind rotor
by Driss, Zied & Mlayeh, Olfa & Driss, Dorra & Maaloul, Makram & Abid, Mohamed Salah
- 518-528 Enhancing hydropower modeling in variable generation integration studies
by Ibanez, Eduardo & Magee, Timothy & Clement, Mitch & Brinkman, Gregory & Milligan, Michael & Zagona, Edith
- 529-536 Wave energy and hot spots in Anzali port
by Hadadpour, Sanaz & Etemad-Shahidi, Amir & Jabbari, Ebrahim & Kamranzad, Bahareh
- 537-554 A comparative exergy and exergoeconomic analysis of a residential heat supply system paradigm of Japan and local source based district heating system using SPECO (specific exergy cost) method
by Baldvinsson, Ivar & Nakata, Toshihiko
- 555-566 Linear algebra solution to psychometric analysis of air-conditioning systems
by Ghiaus, Christian
- 567-575 Micro-energy markets: The role of a consumer preference pricing strategy on microgrid energy investment
by Faber, Isaac & Lane, William & Pak, Wayne & Prakel, Mary & Rocha, Cheyne & Farr, John V.
- 576-584 Supply chain design under uncertainty for advanced biofuel production based on bio-oil gasification
by Li, Qi & Hu, Guiping
- 585-594 The relationship between European electricity markets and emission allowance futures prices in phase II of the EU (European Union) emission trading scheme
by Boersen, Arieke & Scholtens, Bert
- 595-606 Carbon dioxide emissions, energy consumption, economic growth, and foreign direct investment: Causality analysis for Sub-Saharan Africa
by Kivyiro, Pendo & Arminen, Heli
- 607-617 Greenhouse gas emissions from recovery of various North American conventional crudes
by Rahman, Md Mustafizur & Canter, Christina & Kumar, Amit
- 618-637 Reducing the total life cycle energy demand of recent residential buildings in Lebanon
by Stephan, André & Stephan, Laurent
- 638-650 Exergetic and exergo-economic analyses of an aero-derivative gas turbine engine
by Turan, Onder & Aydin, Hakan
- 651-661 Maximum power tracking in WECS (Wind energy conversion systems) via numerical and stochastic approaches
by Elnaggar, M. & Abdel Fattah, H.A. & Elshafei, A.L.
- 662-674 Feasibility study of heat-integrated distillation columns using rigorous optimization
by Shahandeh, Hossein & Ivakpour, Javad & Kasiri, Norollah
- 675-681 Heat exchanger operation in the externally heated air valve engine with separated settling chambers
by Kazimierski, Zbyszko & Wojewoda, Jerzy
- 682-693 Determining reserve requirements in DK1 area of Nord Pool using a probabilistic approach
by Saez-Gallego, Javier & Morales, Juan M. & Madsen, Henrik & Jónsson, Tryggvi
- 694-706 Economic comparison of ORC (Organic Rankine cycle) processes at different scales
by Meinel, Dominik & Wieland, Christoph & Spliethoff, Hartmut
- 707-718 A Gravitational Search Algorithm (GSA) based Photo-Voltaic (PV) excitation control strategy for single phase operation of three phase wind-turbine coupled induction generator
by Chatterjee, Arunava & Roy, Krishna & Chatterjee, Debashis
- 719-733 Critical temperature criterion for selection of working fluids for subcritical pressure Organic Rankine cycles
by Xu, Jinliang & Yu, Chao
- 734-740 Influence of devolatilized gases composition from raw coal fuel in the lab scale DCFC (direct carbon fuel cell) system
by Eom, Seongyong & Ahn, Seongyool & Rhie, Younghoon & Kang, Kijoong & Sung, Yonmo & Moon, Cheoreon & Choi, Gyungmin & Kim, Duckjool
- 741-752 Experimental and simulation investigation of the combustion characteristics and emissions using n-butanol/biodiesel dual-fuel injection on a diesel engine
by Liu, Haifeng & Wang, Xin & Zheng, Zunqing & Gu, Jingbo & Wang, Hu & Yao, Mingfa
- 753-761 Conceptual design of syngas production systems with almost net-zero carbon dioxide emissions
by Wu, Wei & Yang, Hsiao-Tung & Hwang, Jenn-Jiang
- 762-774 Assessment regarding energy saving and decoupling for different AHU (air handling unit) and control strategies in the hot-humid climatic region of Iraq
by Homod, Raad Z.
- 775-787 Influence of different swirl vane angles of over fire air on flow and combustion characteristics and NOx emissions in a 600 MWe utility boiler
by Ti, Shuguang & Chen, Zhichao & Li, Zhengqi & Xie, Yiquan & Shao, Yunlin & Zong, Qiudong & Zhang, Qinghua & Zhang, Hao & Zeng, Lingyan & Zhu, Qunyi
- 788-794 Combined fluidized bed retorting and circulating fluidized bed combustion system of oil shale: 2. Energy and economic analysis
by Han, Xiangxin & Niu, Mengting & Jiang, Xiumin
- 795-803 Hybrid unscented particle filter based state-of-charge determination for lead-acid batteries
by Shen, Yanqing
- 804-809 Investigation of thermal characteristics of high-capacity loop heat pipes after a long-term storage
by Maydanik, Yu.F. & Chernysheva, M.A. & Pastukhov, V.G.
- 810-828 Operational analysis of a small-capacity cogeneration system with a gas hydrate battery
by Obara, Shin'ya & Kikuchi, Yoshinobu & Ishikawa, Kyosuke & Kawai, Masahito & Kashiwaya, Yoshiaki
- 829-835 Combustion and emissions characteristics of a spark-ignition engine fueled with hydrogen–methanol blends under lean and various loads conditions
by Zhang, Bo & Ji, Changwei & Wang, Shuofeng & Liu, Xiaolong
- 836-844 Study on a heat recovery system for the thermal power plant utilizing air cooling island
by Sun, Jian & Fu, Lin & Sun, Fangtian & Zhang, Shigang
- 845-854 Oxy-combustion of corn, sunflower, rape and microalgae bioresidues and their blends from the perspective of thermogravimetric analysis
by López, R. & Fernández, C. & Fierro, J. & Cara, J. & Martínez, O. & Sánchez, M.E.
- 855-862 Innovative correlation for calculating thermal performance of counterflow wet-cooling tower
by Khamis Mansour, M. & Hassab, M.A.
- 863-870 Numerical simulation of nanofluid application in a C-shaped chaotic channel: A potential approach for energy efficiency improvement
by Bahiraei, Mehdi & Hangi, Morteza
- 871-876 Comparison between graphene supported Pt hollow nanospheres and graphene supported Pt solid nanoparticles for hydrogen evolution reaction
by Ojani, Reza & Valiollahi, Roudabeh & Raoof, Jahan-Bakhsh
- 877-885 Heating, cooling, and electrical load forecasting for a large-scale district energy system
by Powell, Kody M. & Sriprasad, Akshay & Cole, Wesley J. & Edgar, Thomas F.
- 886-895 A coupled three dimensional model of vanadium redox flow battery for flow field designs
by Yin, Cong & Gao, Yan & Guo, Shaoyun & Tang, Hao
- 896-905 MHD (magneto-hydrodynamic) flow and radiative nonlinear heat transfer of a viscoelastic fluid over a stretching sheet with heat generation/absorption
by Cortell, Rafael
- 906-917 Risk, innovation, electricity infrastructure and construction cost overruns: Testing six hypotheses
by Sovacool, Benjamin K. & Gilbert, Alex & Nugent, Daniel
- 918-927 Gross error isolability for operational data in power plants
by Jiang, Xiaolong & Liu, Pei & Li, Zheng
- 928-940 A fuzzy multiobjective linear programming model for design and management of anaerobic digestion based bioenergy supply chains
by Yılmaz Balaman, Şebnem & Selim, Hasan
- 941-949 Spectrally corrected direct normal irradiance based on artificial neural networks for high concentrator photovoltaic applications
by Fernández, Eduardo F. & Almonacid, Florencia
- 950-955 Combustion of biodiesel in a large-scale laboratory furnace
by Pereira, Caio & Wang, Gongliang & Costa, Mário
2014, Volume 73, Issue C
- 1-14 Assessing energy security: An overview of commonly used methodologies
by Månsson, André & Johansson, Bengt & Nilsson, Lars J.
- 15-24 A novel adaptive blade concept for large-scale wind turbines. Part I: Aeroelastic behaviour
by Capuzzi, M. & Pirrera, A. & Weaver, P.M.
- 25-32 A novel adaptive blade concept for large-scale wind turbines. Part II: Structural design and power performance
by Capuzzi, M. & Pirrera, A. & Weaver, P.M.
- 33-43 Pyrolysis of three different types of microalgae: Kinetic and evolved gas analysis
by López-González, D. & Fernandez-Lopez, M. & Valverde, J.L. & Sanchez-Silva, L.
- 44-58 Economic growth, energy consumption and CO2 emissions in Gulf Cooperation Council countries
by Salahuddin, Mohammad & Gow, Jeff
- 59-69 Combustion characteristics and optimization of CPG (compressed producer gas) in a constant volume combustion chamber
by Soid, S.N. & Zainal, Z.A.
- 70-79 The economic influence of photovoltaic technology on electricity generation: A CGE (computable general equilibrium) approach for the Andalusian case
by Cansino, J.M. & Cardenete, M.A. & González-Limón, J.M. & Román, R.
- 80-87 Parametric study on the advantages of weather-predicted control algorithm of free cooling ventilation system
by Medved, Sašo & Babnik, Miha & Vidrih, Boris & Arkar, Ciril
- 88-95 Comparative analysis on power curve models of wind turbine generator in estimating capacity factor
by Chang, Tian-Pau & Liu, Feng-Jiao & Ko, Hong-Hsi & Cheng, Shih-Ping & Sun, Li-Chung & Kuo, Shye-Chorng
- 96-109 A heuristic method to design autonomous village electrification projects with renewable energies
by Ranaboldo, Matteo & García-Villoria, Alberto & Ferrer-Martí, Laia & Pastor Moreno, Rafael
- 110-125 A comparison between renewable transport fuels that can supplement or replace biofuels in a 100% renewable energy system
by Connolly, D. & Mathiesen, B.V. & Ridjan, I.
- 126-136 Stochastic performance evaluation of horizontal axis wind turbine blades using non-deterministic CFD simulations
by Liu, ZhiYi & Wang, XiaoDong & Kang, Shun
- 137-144 Energy security and the diversity of energy flows in an energy system
by Ranjan, Ashish & Hughes, Larry
- 145-159 Technology analysis of integrated biorefineries through process simulation and hybrid optimization
by Geraili, A. & Sharma, P. & Romagnoli, J.A.
- 160-176 The effects of kinetic parameters on combustion characteristics in a sintering bed
by Pahlevaninezhad, Masoud & Davazdah Emami, Mohsen & Panjepour, Masoud
- 177-191 Enhancing performance of a linear dielectric based concentrating photovoltaic system using a reflective film along the edge
by Baig, Hasan & Sarmah, Nabin & Chemisana, Daniel & Rosell, Joan & Mallick, Tapas K.
- 192-203 A comparative analysis of configurations of linear Fresnel collectors for concentrating solar power
by Montes, María J. & Rubbia, Carlo & Abbas, Rubén & Martínez-Val, José M.
- 204-213 Selection and optimization of pure and mixed working fluids for low grade heat utilization using organic Rankine cycles
by Andreasen, J.G. & Larsen, U. & Knudsen, T. & Pierobon, L. & Haglind, F.
- 214-220 Pretreatment of bio-oil followed by upgrading via esterification to boiler fuel
by Tanneru, Sathish K. & Parapati, Divya R. & Steele, Philip H.
- 221-232 Accurate medium-term wind power forecasting in a censored classification framework
by Croonenbroeck, Carsten & Dahl, Christian Møller
- 233-257 3D numerical investigation of flow and heat transfer characteristics in smooth wavy fin-and-elliptical tube heat exchangers using new type vortex generators
by Lotfi, Babak & Zeng, Min & Sundén, Bengt & Wang, Qiuwang
- 258-263 Numerical and experimental methodology to measure the thermal efficiency of pots on electrical stoves
by Cadavid, Francisco J. & Cadavid, Yonatan & Amell, Andrés A. & Arrieta, Andrés E. & Echavarría, Juan D.
- 264-281 On the definition of exergy efficiencies for petroleum systems: Application to offshore oil and gas processing
by Nguyen, Tuong-Van & Voldsund, Mari & Elmegaard, Brian & Ertesvåg, Ivar Ståle & Kjelstrup, Signe
- 282-301 Life performance of oil and gas platforms: Site integration and thermodynamic evaluation
by Nguyen, Tuong-Van & Fülöp, Tamás Gábor & Breuhaus, Peter & Elmegaard, Brian
- 302-310 Constructal design of cooling channels embedded in a ring-shaped heat-generating body
by Salimpour, Mohammad Reza & Menbari, Amir
- 311-324 Identification and selection of potential sites for onshore wind farms development in Region of Murcia, Spain
by Sánchez-Lozano, J.M. & García-Cascales, M.S. & Lamata, M.T.
- 325-339 Development of a new multi zone model for prediction of HCCI (homogenous charge compression ignition) engine combustion, performance and emission characteristics
by Neshat, Elaheh & Saray, Rahim Khoshbakhti
- 340-353 Solving non-linear, non-smooth and non-convex optimal power flow problems using chaotic invasive weed optimization algorithms based on chaos
by Ghasemi, Mojtaba & Ghavidel, Sahand & Akbari, Ebrahim & Vahed, Ali Azizi
- 354-366 Influence of properties of various common bio-fuels on the combustion and emission characteristics of high-speed DI (direct injection) diesel engine: Vegetable oil, bio-diesel, ethanol, n-butanol, diethyl ether
by Rakopoulos, Dimitrios C. & Rakopoulos, Constantine D. & Giakoumis, Evangelos G. & Papagiannakis, Roussos G. & Kyritsis, Dimitrios C.
- 367-379 Studying the repetitive extinction-ignition dynamics for lean premixed hydrogen-air combustion in a heated microchannel
by Alipoor, Alireza & Mazaheri, Kiumars
- 380-386 The transmission of fluctuant patterns of the forex burden based on international crude oil prices
by Gao, Xiangyun & An, Haizhong & Fang, Wei & Li, Huajiao & Sun, Xiaoqi
- 387-398 New formulations of the ‘energy hub’ model to address operational constraints
by Evins, Ralph & Orehounig, Kristina & Dorer, Viktor & Carmeliet, Jan
- 399-415 Modelling and optimal operation of a small-scale integrated energy based district heating and cooling system
by Jing, Z.X. & Jiang, X.S. & Wu, Q.H. & Tang, W.H. & Hua, B.
- 416-429 Pressurized OCC (oxy-coal combustion) process ideally flexible to the thermal load
by Zebian, Hussam & Mitsos, Alexander
- 430-442 Investigation into the optimal wind turbine layout patterns for a Hong Kong offshore wind farm
by Gao, Xiaoxia & Yang, Hongxing & Lu, Lin
- 443-452 Adaptive monitoring of emissions in energy boilers using self-organizing maps: An application to a biomass-fired CFB (circulating fluidized bed)
by Liukkonen, M. & Hiltunen, T.
- 453-464 Solar cooling between thermal and photovoltaic: An energy and economic comparative study in the Mediterranean conditions
by Noro, M. & Lazzarin, R.M.
- 465-474 Promoting energy conservation in China's iron & steel sector
by Lin, Boqiang & Wang, Xiaolei
- 475-483 Exergy analysis and working fluid selection of organic Rankine cycle for low grade waste heat recovery
by Long, R. & Bao, Y.J. & Huang, X.M. & Liu, W.
- 484-496 Temperature distribution and classical entropy generation analyses in an asymmetric cooling composite hollow cylinder with temperature-dependent thermal conductivity and internal heat generation
by Torabi, Mohsen & Zhang, Kaili
- 497-505 Investigation of energy efficient hydraulic hybrid propulsion system for automobiles
by Wu, Wei & Hu, Jibin & Jing, Chongbo & Jiang, Zhonglin & Yuan, Shihua
- 506-512 Hybrid composite of screen-printed inorganic thermoelectric film and organic conducting polymer for flexible thermoelectric power generator
by We, Ju Hyung & Kim, Sun Jin & Cho, Byung Jin
- 513-522 Detailed comparative study regarding different formulae of predicting the iron losses in a machine excited by non-sinusoidal supply
by El-Kharashi, Eyhab
- 523-530 Enhancement of methane production with horse manure supplement and pretreatment in a full-scale biogas process
by Mönch-Tegeder, Matthias & Lemmer, Andreas & Oechsner, Hans
- 531-542 Power and hydrogen production from ammonia in a micro-thermophotovoltaic device integrated with a micro-reformer
by Um, Dong Hyun & Kim, Tae Young & Kwon, Oh Chae
- 543-553 Performance analysis of a novel power/refrigerating combined-system driven by the low-grade waste heat using different refrigerants
by Li, You-Rong & Wang, Xiao-Qiong & Li, Xiao-Ping & Wang, Jian-Ning
- 554-566 An unequivocal normalization-based paradigm to solve dynamic economic and emission active-reactive OPF (optimal power flow)
by Pourakbari-Kasmaei, Mahdi & Rider, Marcos J. & Mantovani, José R.S.
- 567-574 Improved wind forecasts for wind power generation using the Eta model and MOS (Model Output Statistics) method
by Lazić, Lazar & Pejanović, Goran & Živković, Momčilo & Ilić, Luka
- 575-580 Modelling microalgae growth in nitrogen-limited continuous culture
by Zhou, Xinping & Yuan, Shuo & Chen, Ranchi & Song, Bao
- 581-591 Economic evaluation of an industrial high temperature lift heat transformer
by Donnellan, Philip & Cronin, Kevin & Acevedo, Yaset & Byrne, Edmond
- 592-605 Modelling decentralised heat supply: An application and methodological extension in TIMES
by Merkel, Erik & Fehrenbach, Daniel & McKenna, Russell & Fichtner, Wolf
- 606-617 Minimum entropy generation due to heat transfer and fluid friction in a parabolic trough receiver with non-uniform heat flux at different rim angles and concentration ratios
by Mwesigye, Aggrey & Bello-Ochende, Tunde & Meyer, Josua P.
- 618-634 A two-phase flow and non-isothermal agglomerate model for a proton exchange membrane (PEM) fuel cell
by Xing, Lei & Liu, Xiaoteng & Alaje, Taiwo & Kumar, Ravi & Mamlouk, Mohamed & Scott, Keith
- 635-652 Design of biomass and natural gas based IGFC using multi-objective optimization
by Naraharisetti, Pavan Kumar & Lakshminarayanan, S. & Karimi, I.A.
- 653-660 Impact of biodiesel fuel on cold starting of automotive direct injection diesel engines
by Broatch, A. & Tormos, B. & Olmeda, P. & Novella, R.
- 661-669 Biodiesel production optimization using γAl2O3 based catalysts
by Sánchez, Marcos & Navas, Marisa & Ruggera, José F. & Casella, Mónica L. & Aracil, José & Martínez, Mercedes
- 670-679 How policy choice affects investment in low-carbon technology: The case of CO2 capture in indirect coal liquefaction in China
by Zhou, Wenji & Zhu, Bing & Chen, Dingjiang & Zhao, Fangxian & Fei, Weiyang
- 680-685 Status of energy conservation in Taiwan's pulp and paper industry
by Lin, Hsin-Chiu & Chan, David Yih-Liang & Lin, Wei-Chun & Hsu, Chung-Hsuan & Hong, Gui-Bing
- 686-693 Methanol-gasoline DFSI (dual-fuel spark ignition) combustion with dual-injection for engine knock suppression
by Liu, Hui & Wang, Zhi & Wang, Jianxin
- 694-702 Single and double pass solar air heaters with partially perforated cover and packed mesh
by Nowzari, Raheleh & Aldabbagh, L.B.Y. & Egelioglu, F.
- 703-715 The influences of pressure and temperature on laminar flame propagations of n-butanol, iso-octane and their blends
by Liu, Kaimin & Fu, Jianqin & Deng, Banglin & Yang, Jing & Tang, Qijun & Liu, Jingping
- 716-730 Integrated technological-economic modeling platform for energy and climate policy analysis
by Fortes, Patrícia & Pereira, Rui & Pereira, Alfredo & Seixas, Júlia
- 731-740 Study on analytical modelling approaches to the performance of thin film PV modules in sunny inland climates
by Torres-Ramírez, M. & Nofuentes, G. & Silva, J.P. & Silvestre, S. & Muñoz, J.V.
- 741-750 Tracking European Union CO2 emissions through LMDI (logarithmic-mean Divisia index) decomposition. The activity revaluation approach
by Fernández González, P. & Landajo, M. & Presno, M.J.
- 751-761 Evaluating China's biomass power production investment based on a policy benefit real options model
by Wang, Xingwei & Cai, Yanpeng & Dai, Chao
- 762-770 Multi-criteria optimization model to investigate the energy waste of off-road vehicles utilizing soil bin facility
by Taghavifar, Hamid & Mardani, Aref & Karim-Maslak, Haleh
- 771-779 Empirical and dynamic primary energy factors
by Wilby, Mark Richard & Rodríguez González, Ana Belén & Vinagre Díaz, Juan José
- 780-786 On the placement of a phase change material thermal shield within the cavity of buildings walls for heat transfer rate reduction
by Jin, Xing & Medina, Mario A. & Zhang, Xiaosong
- 787-800 Life-cycle cost benefit analysis and optimal design of small scale active storage system for building demand limiting
by Cui, Borui & Wang, Shengwei & Sun, Yongjun
- 801-808 Energy consumption and optimization of internally cooled/heated liquid desiccant air-conditioning system: A case study in Hong Kong
by Qi, Ronghui & Lu, Lin
- 809-817 Energy and exergy analyses of native cassava starch drying in a tray dryer
by Aviara, Ndubisi A. & Onuoha, Lovelyn N. & Falola, Oluwakemi E. & Igbeka, Joseph C.
- 818-828 Methodology for estimating thermodynamic parameters and performance of working fluids for organic Rankine cycles
by Brown, J. Steven & Brignoli, Riccardo & Daubman, Samantha
- 829-837 Graphical method for identifying the optimal purification process of hydrogen systems
by Yang, Minbo & Feng, Xiao & Chu, Khim Hoong & Liu, Guilian
- 838-843 Efficiency assessment of air stripping packed towers for removal of VOCs (volatile organic compounds) from industrial and drinking waters
by Ghoreyshi, Ali Asghar & Sadeghifar, Hamidreza & Entezarion, Fereshteh
- 844-855 Experimental investigation into pulverized-coal combustion performance and NO formation using sub-stoichiometric ratios
by Chen, Zhichao & Wang, Zhenwang & Li, Zhengqi & Xie, Yiquan & Ti, Shuguang & Zhu, Qunyi
- 856-865 Feasibility of satisfying electrical energy needs with hybrid systems for a medium-size hotel on Kish Island, Iran
by Fazelpour, Farivar & Soltani, Nima & Rosen, Marc A.
- 866-874 Effects of operational shocks on key microbial populations for biogas production in UASB (Upflow Anaerobic Sludge Blanket) reactors
by Couras, C.S. & Louros, V.L. & Grilo, A.M. & Leitão, J.H. & Capela, M.I. & Arroja, L.M. & Nadais, M.H.
- 875-889 A roadmap for repowering California for all purposes with wind, water, and sunlight
by Jacobson, Mark Z. & Delucchi, Mark A. & Ingraffea, Anthony R. & Howarth, Robert W. & Bazouin, Guillaume & Bridgeland, Brett & Burkart, Karl & Chang, Martin & Chowdhury, Navid & Cook, Roy & Escher, Giulia & Galka, Mike & Han, Liyang & Heavey, Christa & Hernandez, Angelica & Jacobson, Daniel F. & Jacobson, Dionna S. & Miranda, Brian & Novotny, Gavin & Pellat, Marie & Quach, Patrick & Romano, Andrea & Stewart, Daniel & Vogel, Laura & Wang, Sherry & Wang, Hara & Willman, Lindsay & Yeskoo, Tim
- 890-897 Short and medium-term cloudiness forecasting using remote sensing techniques and sky camera imagery
by Alonso, J. & Batlles, F.J.
- 898-907 Modeling and optimization of a chiller plant
by Wei, Xiupeng & Xu, Guanglin & Kusiak, Andrew
- 908-915 Exergy analysis of a gas-hydrate cool storage system
by Bi, Yuehong & Liu, Xiao & Jiang, Minghe
- 916-925 Uncertainty handling using neural network-based prediction intervals for electrical load forecasting
by Quan, Hao & Srinivasan, Dipti & Khosravi, Abbas
- 926-932 Development and performance of bench-scale reactor for the photocatalytic generation of hydrogen
by Ruban, Priya & Sellappa, Kanmani
- 933-942 Numerical simulation for the optimum design of ground source heat pump system using building foundation as horizontal heat exchanger
by Nam, Yujin & Chae, Ho-Byung
- 943-957 A planning model to assess hydrogen as an alternative fuel for national light-duty vehicle portfolio
by Krishnan, Venkat & Gonzalez-Marciaga, Lizbeth & McCalley, James
- 958-967 Risk averse optimal operation of a virtual power plant using two stage stochastic programming
by Tajeddini, Mohammad Amin & Rahimi-Kian, Ashkan & Soroudi, Alireza
- 968-977 Diffusion of energy efficient technologies in the German steel industry and their impact on energy consumption
by Arens, M. & Worrell, E.
- 978-986 A novel M-D (multi-dimensional) linear prediction filter approach for hourly solar radiation forecasting
by Akarslan, Emre & Hocaoğlu, Fatih Onur & Edizkan, Rifat
- 987-996 Performance advancement of solar air-conditioning through integrated system design for building
by Fong, K.F. & Lee, C.K.
- 997-1006 Optimal phasing of the European tidal stream resource using the greedy algorithm with penalty function
by Neill, Simon P. & Hashemi, M. Reza & Lewis, Matt J.
- 1007-1016 Investigating the relationship between air and ground temperature variations in shallow depths in northern Greece
by Tsilingiridis, G. & Papakostas, K.
2014, Volume 72, Issue C
- 1-16 Factors affecting biodiesel engine performance and exhaust emissions – Part I: Review
by Pullen, James & Saeed, Khizer
- 17-34 Factors affecting biodiesel engine performance and exhaust emissions – Part II: Experimental study
by Pullen, James & Saeed, Khizer
- 35-43 Performance analysis of a modified regenerative Brayton and inverse Brayton cycle
by Goodarzi, Mohsen & Kiasat, Mohsen & Khalilidehkordi, Ehsan
- 44-57 Maximum-efficiency architectures for steady-flow combustion engines, I: Attractor trajectory optimization approach
by Ramakrishnan, Sankaran & Edwards, Christopher F.
- 58-68 Maximum-efficiency architectures for steady-flow combustion engines, II: Work-regenerative gas turbine engines
by Ramakrishnan, Sankaran & Edwards, Christopher F.
- 69-79 Thermodynamic study of multi-effect thermal vapour-compression desalination systems
by Samaké, Oumar & Galanis, Nicolas & Sorin, Mikhail
- 80-92 Small adaptations, big impacts: Options for an optimized mix of variable renewable energy sources
by Tafarte, Philip & Das, Subhashree & Eichhorn, Marcus & Thrän, Daniela
- 93-102 Parameter identification of solar cells using artificial bee colony optimization
by Oliva, Diego & Cuevas, Erik & Pajares, Gonzalo
- 103-114 Thermo-ecological and exergy replacement costs of nickel processing
by Domínguez, Adriana & Czarnowska, Lucyna & Valero, Alicia & Stanek, Wojciech & Valero, Antonio
- 115-125 Are structural change and modernisation leading to convergence in the CO2 economy? Decomposition analysis of China, EU and USA
by Kaivo-oja, J. & Luukkanen, J. & Panula-Ontto, J. & Vehmas, J. & Chen, Y. & Mikkonen, S. & Auffermann, B.
- 126-134 Modeling natural gas price volatility: The case of the UK gas market
by van Goor, Harm & Scholtens, Bert
- 135-144 Displacer gap losses in beta and gamma Stirling engines
by Mabrouk, M.T. & Kheiri, A. & Feidt, M.
- 145-158 Simultaneous use of MRM (maximum rectangle method) and optimization methods in determining nominal capacity of gas engines in CCHP (combined cooling, heating and power) systems
by Sanaye, Sepehr & Khakpaay, Navid
- 159-167 Fluid selection of Organic Rankine Cycle for low-temperature waste heat recovery based on thermal optimization
by Cataldo, Filippo & Mastrullo, Rita & Mauro, Alfonso William & Vanoli, Giuseppe Peter
- 168-179 How much CO2 emissions will be reduced through industrial structure change if China focuses on domestic rather than international welfare?
by Zhu, Yongbin & Shi, Yajuan & Wang, Zheng
- 180-187 Volatile species release during torrefaction of wood and its macromolecular constituents: Part 1 – Experimental study
by Nocquet, Timothée & Dupont, Capucine & Commandre, Jean-Michel & Grateau, Maguelone & Thiery, Sébastien & Salvador, Sylvain
- 188-194 Volatile species release during torrefaction of biomass and its macromolecular constituents: Part 2 – Modeling study
by Nocquet, Timothée & Dupont, Capucine & Commandre, Jean-Michel & Grateau, Maguelone & Thiery, Sébastien & Salvador, Sylvain
- 195-200 Experimental study on temperature variation in a porous inert media burner for premixed methane air combustion
by Wang, Hongmin & Wei, Chunzhi & Zhao, Pinghui & Ye, Taohong
- 201-214 Thermodynamic analysis of a coal-based polygeneration system with partial gasification
by Li, Yuanyuan & Zhang, Guoqiang & Yang, Yongping & Zhai, Dailong & Zhang, Kai & Xu, Gang
- 215-221 Fabrication and operating characteristics of a flat tubular segmented-in-series solid oxide fuel cell unit bundle
by Kim, Dae-Wi & Yun, Ui-Jin & Lee, Jong-Won & Lim, Tak-Hyoung & Lee, Seung-Bok & Park, Seok-Joo & Song, Rak-Hyun & Kim, Guntae
- 222-232 Prediction of biomass-generated syngas using extents of major reactions in a continuous stirred-tank reactor
by Sharma, Ashokkumar M. & Kumar, Ajay & Madihally, Sundararajan & Whiteley, James R. & Huhnke, Raymond L.
- 233-241 The linkage between crude oil consumption and economic growth in Latin America: The panel framework investigations for multiple regions
by Behmiri, Niaz Bashiri & Pires Manso, José Ramos
- 242-253 Combustion of CH4/O2/N2 in a well stirred reactor
by Wang, Feifei & Li, Pengfei & Mei, Zhenfeng & Zhang, Jianpeng & Mi, Jianchun
- 254-265 Matrix method for comparing system and individual energy return ratios when considering an energy transition
by King, Carey W.
- 266-273 Mathematical modeling and process parameters optimization studies by artificial neural network and response surface methodology: A case of non-edible neem (Azadirachta indica) seed oil biodiesel synthesis
by Betiku, Eriola & Omilakin, Oluwasesan Ropo & Ajala, Sheriff Olalekan & Okeleye, Adebisi Aminat & Taiwo, Abiola Ezekiel & Solomon, Bamidele Ogbe
- 274-290 Predicting the physical–chemical properties of biodiesel fuels assessing the molecular structure with the SAFT−γ group contribution approach
by Perdomo, Felipe A. & Millán, Beatriz M. & Aragón, José L.
- 291-299 A novel distributed optimal power sharing method for radial dc microgrids with different distributed energy sources
by Asad, R. & Kazemi, A.
- 300-310 A three-dimensional transient model for EGS subsurface thermo-hydraulic process
by Jiang, Fangming & Chen, Jiliang & Huang, Wenbo & Luo, Liang
- 311-321 Heat integration of fractionating systems in para-xylene plants based on column optimization
by Chen, Ting & Zhang, Bingjian & Chen, Qinglin
- 322-330 Significance of loss correlations in performance prediction of small scale, highly loaded turbine stages working in Organic Rankine Cycles
by Klonowicz, Piotr & Heberle, Florian & Preißinger, Markus & Brüggemann, Dieter
- 331-343 Heat transfer and film cooling effectiveness on the squealer tip of a turbine blade
by Park, Jun Su & Lee, Dong Hyun & Rhee, Dong-Ho & Kang, Shin Hyung & Cho, Hyung Hee
- 344-359 Thermal and thermohydraulic performance evaluation of a novel type double pass packed bed solar air heater under external recycle using an analytical and RSM (response surface methodology) combined approach
by Singh, Satyender & Dhiman, Prashant
- 360-370 The application of power-to-gas, pumped hydro storage and compressed air energy storage in an electricity system at different wind power penetration levels
by de Boer, Harmen Sytze & Grond, Lukas & Moll, Henk & Benders, René
- 371-380 Paraffin/diatomite/multi-wall carbon nanotubes composite phase change material tailor-made for thermal energy storage cement-based composites
by Xu, Biwan & Li, Zongjin
- 381-392 Heat transfer characteristics of thermal energy storage of a composite phase change materials: Numerical and experimental investigations
by Aadmi, Moussa & Karkri, Mustapha & El Hammouti, Mimoun
- 393-404 Mathematical approach to the characterization of daily energy balance in autonomous photovoltaic solar systems
by Casares, F.J. & Lopez-Luque, R. & Posadillo, R. & Varo-Martinez, M.
- 405-413 An important feature of air heat pump cycle: Heating capacity in line with heating load
by Zhang, Chun-Lu & Yuan, Han
- 414-420 Thermophysical characterization of Mg–51%Zn eutectic metal alloy: A phase change material for thermal energy storage in direct steam generation applications
by Blanco-Rodríguez, P. & Rodríguez-Aseguinolaza, J. & Risueño, E. & Tello, M.
- 421-426 Improved hydrogen generation from the hydrolysis of aluminum ball milled with hydride
by Liu, Yongan & Wang, Xinhua & Liu, Haizhen & Dong, Zhaohui & Li, Shouquan & Ge, Hongwei & Yan, Mi
- 427-433 Banking development and energy consumption: Evidence from a panel of Middle Eastern countries
by Aslan, Alper & Apergis, Nicholas & Topcu, Mert
- 434-442 Short term electric load forecasting by wavelet transform and grey model improved by PSO (particle swarm optimization) algorithm
by Bahrami, Saadat & Hooshmand, Rahmat-Allah & Parastegari, Moein
- 443-458 Features of a fully renewable US electricity system: Optimized mixes of wind and solar PV and transmission grid extensions
by Becker, Sarah & Frew, Bethany A. & Andresen, Gorm B. & Zeyer, Timo & Schramm, Stefan & Greiner, Martin & Jacobson, Mark Z.
- 459-475 Improved exergoeconomic analysis of a retrofitted natural gas-based cogeneration system
by Luo, Xianglong & Hu, Jiahao & Zhao, Jun & Zhang, Bingjian & Chen, Ying & Mo, Songping
- 476-483 A facility-location model for biofuel plants: Applications in the Colombian context
by Duarte, Alexandra E. & Sarache, William A. & Costa, Yasel J.
- 484-491 Comparison of particle swarm optimization and other metaheuristics on electricity demand estimation: A case study of Iran
by Askarzadeh, Alireza
- 492-500 Improving vortex tube performance based on vortex generator design
by Farzaneh-Gord, Mahmood & Sadi, Meisam
- 501-509 Hybrid-input power supply with PFC (power factor corrector) and MPPT (maximum power point tracking) features for battery charging and HB-LED driving
by Shen, Chih-Lung & Ko, Yong-Xian
- 510-520 Mean-variance model for power system economic dispatch with wind power integrated
by Li, Y.Z. & Wu, Q.H. & Li, M.S. & Zhan, J.P.
Printed from https://ideas.repec.org/s/eee/energy138.html
