Content
2021, Volume 16, Issue 1
- 156-164 Modelling of energy and exergy analysis of ORC integrated systems in terms of sustainability by applying artificial neural network
[Thermodynamic performance evaluation of a novel solar energy based multigeneration system]
by Zafer Utlu & Mert Tolon & Arif Karabuga - 165-170 Rheological characteristics of polyethylene-nanotube composites by capillary rheometry
[A review on carbon nanotubes and graphene as fillers in reinforced polymer nanocomposites]
by S Al-Baghdadi & A Al-Amiery - 171-180 Energetic and exergetic studies of modified CO2 transcritical refrigeration cycles
[Fundamental process and system design issues in CO2 vapor compression systems]
by Omprakash S Patil & Shrikant A Shet & Manish Jadhao & Neeraj Agrawal - 181-188 Experimental studies on corrosion inhibition performance of acetylthiophene thiosemicarbazone for mild steel in HCl complemented with DFT investigation
[Effect of 1,3,4 thiadiazole scaffold on the corrosion inhibition of mild steel in acidic medium: an experimental and computational study, J]
by S Al-Baghdadi & T S Gaaz & A Al-Adili & A A Al-Amiery & M S Takriff - 189-198 Research on the synergy incentive evolution among the EPC subjects of energy efficiency retrofitting of existing buildings from the perspective of fairness cognition
[Energy saving and emission reduction of fossil energy based on low carbon economy and its consumption structure optimization]
by Yanping Yang & Bojun Wang & Xiaodan Liu - 199-204 Research on battery pack dynamic equalization technology with improved flying capacitor
[Equalization circuit for a series battery pack/super capacitor bank]
by Huang Chen - 205-211 Optimization of floor radiant air conditioning heating system in building heating design
[Radiant floor heating, second edition]
by Hongpu Liang - 212-219 Design of a partially premixed burner for biogas-fired wall-mounted boiler
[Biogas utilization: experimental investigation on biogas flameless combustion in lab-scale furnace]
by Mengxiao Sun & Xiaomei Huang & Yi Zhao & Pengyuan Zhang & Yang Zhou - 220-228 Is it a possibility to achieve energy plus prefabricated building worldwide?
[Comparative life cycle energy and cost analysis of post-disaster temporary housings]
by Ammar Alkhalidi & Abeer Abuothman & Abdallah AlDweik & Al-Hamza Al-Bazaz - 229-239 Research on optimization strategy of grid frequency modulation based on doubly-fed wind turbines
[Control strategy of DER inverter for improving frequency stability of microgrid]
by Chao Wang & Jianyuan Xu & Liang Wang & Dan Song - 240-245 Mechanical and morphology properties of titanium oxide-epoxy nanocomposites
[Carbon nanomaterials for dye-sensitized solar cell applications: a bright future]
by Tayser Sumer Gaaz & Emad Kamil Hussein & Kussay Ahmed Subhi & Ahmed Al-Amiery - 246-257 Comparison of nZEB indicators for hotel renovations under different European climatic conditions
[What is a nearly zero energy building? Overview, implementation and comparison of definitions]
by Filipe O Cunha & Armando C Oliveira
2020, Volume 15, Issue 1
- 1-16 Modeling and simulation of a small-scale solar-powered absorption cooling system in three cities with a tropical climate
by Andrea Boero & Francis Agyenim - 17-24 Toward energy-efficient governmental buildings in Egypt: investigating the impact of nano aerogel glazing on energy performance
by Ibrahim Rizk Hegazy - 25-39 Performance study of a dual-fluid photovoltaic thermal collector with reflection and refraction solar concentrators
by S S S Baljit & H Y Chan & S H Zaidi & K Sopian - 46-54 Coordinated control strategy of DC microgrid with hybrid energy storage system to smooth power output fluctuation
by Tiezhou Wu & Fanchao Ye & Yuehong Su & Yubo Wang & Saffa Riffat - 55-64 Aerodynamic and structural optimization of wind turbine blade with static aeroelastic effects
by Jie Zhu & Xiaohui Ni & Xiaomei Shen - 65-83 Behavior of unconfined and CFRP confined rubberized concrete
by Rana Faisal Tufail & Xiong Feng & Muhammad Zahid - 84-88 Ecological impact of watershed water pollution control on coastal tourist scenic spots
by Qiong Sun & Xiaofang Wang & Li Wang - 89-96 Study on propagation characteristics of the secondary explosion of coal dust
by Baichao Song & Yucheng Li - 97-105 Key aspects and feasibility assessment of a proposed wind farm in Jordan
by Mohammad Al-Addous & Motasem Saidan & Mathhar Bdour & Zakariya Dalala & Aiman Albatayneh & Christina B Class - 106-111 Reconfigurable equilibrium circuit with additional power supply
by Yu Zhang & Mingming Huang & Tiezhou Wu & Feng Ji - 112-120 Review on window-glazing technologies and future prospects
by Jorge Luis Aguilar-Santana & Hasila Jarimi & Mariana Velasco-Carrasco & Saffa Riffat - 121-142 A comprehensive review on renewable and sustainable heating systems for poultry farming
by Yuanlong Cui & Elmer Theo & Tugba Gurler & Yuehong Su & Riffat Saffa - 143-148 Determining the carbon footprint for a new earthen-based finish
by Yolanda G Aranda-Jimenez & Edgardo J Suarez-Dominguez - 149-154 Optimization of Sludge Fermentation for Volatile Fatty Acids Production
by Sultan K Salamah & Andrew A Randall
2019, Volume 14, Issue 4
- 461-467 Review of Heat and Mass Transfer Enhancement Techniques and Current Advancement for Adsorption Heating/Cooling Systems
by Norhayati Mat Wajid & Blaise Mompuouo & Siddig Omer & Saffa B Riffat - 468-474 Modeling thermal conductivity of Ag/water nanofluid by applying a mathematical correlation and artificial neural network
by Mahdi Ramezanizadeh & Mohammad Alhuyi Nazari - 475-486 Efficient optimized design of solar power tower plants based on successive response surface methodology
by Yan Luo & Yue Hu & Tao Lu - 487-492 Fault diagnosis of air-conditioning refrigeration system based on sparse autoencoder
by Zhiyi Wang & Jiachen Zhong & Jingfan Li & Cui Xia - 493-499 Evaluation criteria of independent hybrid energy systems
by Tae Yong Jung & Donghun Kim & SeoKyung Lim & Jongwoo Moon - 500-507 Experimental investigation and performance analysis of an Organic Rankine Cycle for low-temperature heat to electricity generation
by Lili Wei & Zhenjun Ma & Xuemei Gong & Xiujuan Guo - 508-515 Analysis of energy efficiency improvement of high-tech fabrication plants
by Shih-Cheng Hu & Tee Lin & Ben-Ran Fu & Cheng-Kung Chang & I-Yun Cheng - 516-532 Introducing the RZ model for definition and optimization of the boundary of low emission zones
by Shahab Kabiri & Mansour Hajihosseinlou & Shabnam Kabiri - 533-542 Attaining sustainable high-rise office buildings in warm-summer-cold-winter climates: a case study on Frankfurt
by Yuanda Hong & Wu Deng & Collins I Ezeh & Zhen Peng - 543-549 Assessment of strength development of cemented desert soil
by Talal S Amhadi & Gabriel J Assaf - 550-560 Theoretical and experimental investigations of different area ratios of a supersonic ejector driven by compressed air
by Ahmed AL-nuaimi & Mark Worall & Saffa Riffat - 561-567 A study on CO2 absorption using hybrid solvents in packed columns
by Ravinder Kumar & Mohammad Hossein Ahmadi & Dipen Kumar Rajak & Mohammad Alhuyi Nazari - 568-575 The potential of phase change materials in mitigating cooling load of buildings in UAE
by Yasir Rashid & Mohammed Ziauddin & Bobby Mathew & Fadi Alnaimat
2019, Volume 14, Issue 1
- 1-9 Sensitivity analysis of technical and economic parameters for natural gas management in enhanced oil recovery projects
by Mojtaba Mirzaee & Mohammad Hossein Ahmadi & Emin Acıkkalp & Mohammad Rahimzadeh - 10-22 Technical and economical evaluation of grid-connected renewable power generation system for a residential urban area
by Moslem Akbari Vakilabadi & Abolfazl Afzalabadi & Alireza Khoeini Poorfar & Alireza Rahbari & Mokhtar Bidi & Mohammad Hossein Ahmadi & Tingzhen Ming - 23-35 Surrounding rock control of an innovative gob-side entry retaining with energy-absorbing supporting in deep mining
by Zhibiao Guo & Qiong Wang & Zhaohua Li & Manchao He & Zhibo Ma & Feixiang Zhong & Jie Hu - 36-43 Parametric analysis on the performance of a revolutionary rotary Ericsson heat pump/engine
by Wenbin Zhang & Chris Benson & Andrew Cunningham & Saffa Riffat - 44-69 Review on the recent progress of thermochemical materials and processes for solar thermal energy storage and industrial waste heat recovery
by Hasila Jarimi & Devrim Aydin & Zhang Yanan & Gorkem Ozankaya & Xiangjie Chen & Saffa Riffat - 70-75 Development of a cooling load prediction model for air-conditioning system control of office buildings
by Chengliang Fan & Yundan Liao & Yunfei Ding - 76-82 Low-cost automatic multi-axis solar tracking system for performance improvement in vertical support solar panels using Arduino board
by Timothy Laseinde & Dominic Ramere - 83-88 Experimental study on the thermal performance of solar air conditioning system with MEPCM cooling storage
by Lin Zheng & Wei Zhang & Lingzhi Xie & Wei Wang & Hao Tian & Mo Chen
2018, Volume 13, Issue 4
- 301-310 Nanosilicon dioxide hydrosol as surfactant for preparation of microencapsulated phase change materials for thermal energy storage in buildings
by Weiguang Su & Jo Darkwa & Georgios Kokogiannakis - 311-319 The place of small hydropower electrification scheme in socioeconomic stimulation of Nigeria
by W S Ebhota & P Y Tabakov - 320-326 Medical and dental applications of renewable energy systems
by Yashar Haghighi Bardineh & Fatemeh Mohamadian & Mohammad Hossein Ahmadi & Nazila Akbarianrad - 327-337 Free cooling using phase change material for buildings in hot-arid climate
by Rami Zeinelabdein & Siddig Omer & Elamin Mohamed & Guohui Gan - 338-352 The impact of agricultural chemical inputs on environment: global evidence from informetrics analysis and visualization
by Lu Zhang & Chengxi Yan & Qing Guo & Junbiao Zhang & Jorge Ruiz-Menjivar - 353-363 Comparison of the solar PV cooling system and other cooling systems
by Yuhe Gao & Jie Ji & Zewei Guo & Peng Su - 364-368 The economic benefit of marine based on DEA model
by Jiangping Yu & Weiyang Yu - 369-379 Design methodology of heat recovery steam generator in electric utility for waste heat recovery
by Awais Ahmed & Khaled Khodary Esmaeil & Mohammad A Irfan & Fahad A Al-Mufadi - 380-387 Evaluation of the performance of hybrid CSP/biomass power plants
by João Soares & Armando C Oliveira & Simon Dieckmann & Dirk Krüger & Francesco Orioli - 388-403 Thermo-economic analysis and multi-objective optimization of micro-CHP Stirling system for different climates of Iran
by Maryam Khoshbazan & Mohammad Hossein Ahmadi & Tingzhen Ming & Jamal Tabe Arjmand & Mohammad Rahimzadeh - 404-413 Experimental investigation of a novel PVt/heat pump system for energy-efficient poultry houses
by Tugba Gurler & Theo Elmer & Yuanlong Cui & Siddig Omer & Saffa Riffat - 414-423 Numerical investigation of flow and heat transfer in the sub-channel of an SCWR core with split-vanes
by Qinggang Qiu & Shuai Zhao & Xin Du & Xiaojing Zhu & Shengqiang Shen - 424-431 A numerical investigation of liquid film flow and film thickness distribution outside a horizontal tube
by Xiaocui Zhang & Chuiju Meng & Qinggang Qiu & Shenglin Quan & Shengqiang Shen - 432-437 An improved model to predict thermal runaway in concentrator III–V multi-junction solar cells
by Hui Lv & Wenjuan Huang & Chunfu Cheng & Yiwen Ou & Jun Liao & Yuehong Su & Saffa Riffat - 438-451 Analysis of stakeholder roles and the challenges of solar energy utilization in Iran
by Mohammad Dehghani Madvar & Mohammad Alhuyi Nazari & Jamal Tabe Arjmand & Alireza Aslani & Roghayeh Ghasempour & Mohammad Hossein Ahmadi
2018, Volume 13, Issue 3
- 193-197 Performance of rock–soil slope reinforcement and protection effect in cutting slope construction
by Xiaofeng Luo & Guohui Xing & He Zhao - 198-203 The planning and design of road network structure in urban railway transit hub areas
by Zhaoyang Cai & Jianwei Yan - 204-211 Roof geometry as a factor of thermal behavior: simulation based study of using vaults and domes in the Middle East zone
by Wael Seddik Moustafa & Ibrahim Rizk Hegazy & Mohammed Moustafa Eldabousy - 212-217 Optimization analyses on the performance of an auto-cascade absorption refrigeration system operating with mixed refrigerants
by Jinkun Zhou & Shengjian Le & Qin Wang & Dahong Li - 218-230 Uniformity characteristic and calibration of simple low cost compact halogen solar simulator for indoor experiments
by Erkata Yandri - 231-239 Online Energy Simulator for building fault detection and diagnostics using dynamic energy performance model
by Claudio Giovanni Mattera & Muhyiddine Jradi & Hamid Reza Shaker - 240-249 Experimental performance comparison of adiabatic and internally-cooled membrane dehumidifiers
by Gurubalan Annadurai & Shaligram Tiwari & M P Maiya - 250-254 The economic development incentive mechanism for the existing energy-saving building structure in the perspective of game analysis
by Yin Li & Mei Liang - 255-259 Structural reconstruction design and performance simulation analysis of old buildings based on BIM
by A Lisha & Yixing Deng & Min Ren - 260-265 Evaluation and control of thermal losses and solar fraction in a hot water solar system
by Paolo Valdiserri - 266-271 Applying GMDH artificial neural network in modeling CO2 emissions in four nordic countries
by Mohammad Hossein Rezaei & Milad Sadeghzadeh & Mohammad Alhuyi Nazari & Mohammad Hossein Ahmadi & Fatemeh Razi Astaraei - 272-276 Experimental study on improving stability of PCM and MEPCM slurry with different surfactants
by Zheng Lin & Zhang Wei & Lin Shuang & Jin Xiangyu - 277-285 Interfacial heat and mass transfer analysis in solar-powered, packed-bed adiabatic liquid desiccant regeneration for air conditioning
by Andrew Y A Oyieke & Freddie L Inambao - 286-291 Hybrid PCM—aluminium foams’ thermal storages: an experimental study
by Renato M Lazzarin & Simone Mancin & Marco Noro & Giulia Righetti - 292-297 Energy distribution function based universal adsorption isotherm model for all types of isotherm
by Muhammad Burhan & Muhammad Wakil Shahzad & Kim Choon Ng - 298-298 Corrigendum: Detailed design and optimization of a sustainable micro-algal biofuel process plant
by Andrew Eloka-Eboka & Chiemela Onunka & Freddie Inambao - 299-299 Corrigendum: Materials characterization of innovative composite materials for solar-driven thermochemical heat storage (THS) suitable for building application
by Hasila Jarimi & Devrim Aydin & Yanan Zhang & Yate Ding & Omar Ramadan & Xiangjie Chen & Auwal Dodo & Zafer Utlu & Saffa Riffat
2018, Volume 13, Issue 2
- 109-115 Evaluating CHP management and outputs using simple operational data
by Sam Paine & Patrick James & AbuBakr Bahaj - 116-121 Daylighting performance in UAE traditional buildings used as museums
by Khaled A Al-Sallal & Amira R AbouElhamd & Maitha Bin Dalmouk - 122-130 Detailed design and optimization of a sustainable micro-algal biofuel process plant
by Andrew Eloka-Eboka & Chiemela Onunka & Freddie Inambao - 131-139 What do consumers expect for government subsidies on low-carbon products in China?
by Jing Shuai & Xin Cheng & Jing Liu & Jinhua Cheng - 140-147 Modeling and optimum design of an off-grid PV/WT/FC/diesel hybrid system considering different fuel prices
by Akbar Maleki - 148-160 Indoor air quality investigation of a university library based on field measurement and questionnaire survey
by Yanpeng Wu & Yuming Lu & Ding-Chin Chou - 161-176 Dual source heat pump, a high efficiency and cost-effective alternative for heating, cooling and DHW production
by José M Corberán & Antonio Cazorla-Marín & Javier Marchante-Avellaneda & Carla Montagud - 177-183 Performance testing of a heat pipe PV/T heat pump system under different working modes
by Hongbing Chen & Haoyu Niu & Lei Zhang & Yaxuan Xiong & Huixing Zhai & Jinzhe Nie - 184-190 Study on energy-saving design and operation of hospital purification air conditioning system
by Yunyu Chen - 191-191 Corrigendum: Materials characterization of innovative composite materials for solar-driven thermochemical heat storage (THS) suitable for building application
by Hasila Jarimi & Devrim Aydin & Yanan Zhang & Yate Ding & Omar Ramadan & Xiangjie Chen & Auwal Dodo & Zafer Utlu & Saffa Riffat - 192-192 Corrigendum: Indoor air quality investigation of a university library based on field measurement and questionnaire survey
by Yanpeng Wu & Yuming Lu & Ding-Chin Chou
2018, Volume 13, Issue 1
- 1-5 A novel flue gas heat recovery system based on low-pressure regeneration liquid desiccant cycle
by Xiaoyue Zhang & Zhenying Wang & Zhen Li - 6-14 Experimental analysis of an innovative tile covering for ventilated pitched roofs
by Michele Bottarelli & Marco Bortoloni & Giuseppe Dino - 15-22 Calculating the lighting performance gap in higher education classrooms
by Katharine van Someren & Phil Beaman & Li Shao - 23-29 An investigation into the energy performance gap between the predicted and measured output of photovoltaic systems using dynamic simulation modelling software—a case study
by Shaun Harrison & Liben Jiang - 30-42 Materials characterization of innovative composite materials for solar-driven thermochemical heat storage (THS) suitable for building application
by Hasila Jarimi & Aydin Devrim & Yanan Zhang & Yate Ding & Omar Ramadan & Xiangjie Chen & Auwal Dodo & Zafer Utlu & Saffa Riffat - 43-51 The impact of architectural spaces’ geometric forms and construction materials on the users’ brainwaves and consciousness status
by Eslam Elbaiuomy & Ibrahim Hegazy & Sherif Sheta - 52-60 Thermodynamic analysis of thermophotovoltaic systems used in waste heat recovery systems: an application
by Zafer Utlu & Büşra Selenay Önal - 61-66 Preliminary study on the effect of dry/wet cooling combinations for the sustainable management of water of cooling tower
by Gilbong Lee & Ho-Sang Ra & Beomjoon Lee & Young-Soo Lee & Chul Woo Roh & Young-Jin Baik & Junhyun Cho & Hyungki Shin - 67-75 Microstructure and filtration performance of konjac glucomannan-based aerogels strengthened by wheat straw
by Yixin Wang & Xi Chen & Ying Kuang & Man Xiao & Yuehong Su & Fatang Jiang - 76-83 Hybrid PhotoVoltaic–Thermal heat pump systems: energy and economic performance evaluations in different climates
by Marco Noro & Renato M Lazzarin - 84-91 Energy conservation and thermal environment analysis of room air conditioner with intermittent supply airflow
by Yunqing Fan & Masaki Toyoshima & Makoto Saito - 92-101 Performance investigation of linear evacuated absorber of 2-stage solar Linear Fresnel Reflector module under non-uniform flux distribution
by Balaji Shanmugapriya & K S Reddy & T Sundarajan - 102-108 Study on the impact of blades wrap angle on the performance of pumps as turbines used in water supply system of high-rise buildings
by Jiyun Du & Hongxing Yang & Zhicheng Shen
2017, Volume 12, Issue 4
- 335-348 Investigation of the effects of ambient temperature and dimensional parameters on the performance of solar chimney power plants
by Alibakhsh B Kasaeian & Masoomeh Amirifard & Mohammad Hossein Ahmadi & Fazel Kasaeian - 349-357 Feasibility of a vertical photovoltaic system on a high-rise building in Malaysia: economic evaluation
by Azhar Ghazali & Elias Salleh & Lim Chin Haw & Sohif Mat & Kamaruzzaman Sopian - 358-368 Towards green cities in developing countries: Egyptian new cities as a case study
by Ibrahim Hegazy & Wael Seddik & Hossam Ibrahim - 369-382 Overview of working fluids and sustainable heating, cooling and power generation technologies
by Saffa Riffat & Devrim Aydin & Richard Powell & Yijun Yuan - 383-391 A parametric study of transcritical CO2 simple cooling cycle and combined power cycle
by Anjan Kumar Sahu & Neeraj Agrawal & Prasant Nanda - 392-399 Experimental investigation of evacuated heat pipe solar collector efficiency using phase-change fluid
by Wenbo Fang & Saffa Riffat & Yupeng Wu - 400-410 Solar powered green campus: a simulation study
by Akshay Suhas Baitule & K Sudhakar - 411-419 The impact of the building envelope on the energy efficiency of residential tall buildings in Saudi Arabia
by Noura Ghabra & Lucelia Rodrigues & Philip Oldfield - 420-429 Annual performance comparison between solar water heating system and solar photovoltaic/thermal system—a case study in Shanghai city
by T Zhang & Q Z Zhu & W He & G Pei & J Ji
2017, Volume 12, Issue 3
- 225-232 GHG reduction and energy efficiency analyses in a zero-energy solar house archetype
by Claudia Terezinha Oliveira & Fernanda Antonio & Geraldo Francisco Burani & Miguel Edgar Morales Udaeta - 244-255 The living building: integrating the built environment with nature evaluating the Bibliotheca of Alexandria according to the challenge imperatives
by Ibrahim Hegazy & Wael Seddik & Hossam Ibrahim - 263-271 Feasibility of vertical photovoltaic system on high-rise building in Malaysia: performance evaluation
by Azhar Ghazali & Elias Ilias Salleh & Lim Chin Haw & Sohif Mat & Kamaruzzaman Sopian - 272-280 Experimental and numerical study of a PCM window model as a thermal energy storage unit
by Benjamin Durakovic & Muris Torlak - 281-288 Rammed earth walls in Mediterranean climate: material characterization and thermal behaviour
by Susana Serrano & Lídia Rincón & Belen González & Antonia Navarro & Montserrat Bosch & Luisa F. Cabeza - 289-309 Innovative concretes for low-carbon constructions: a review
by Antonella D'Alessandro & Claudia Fabiani & Anna Laura Pisello & Filippo Ubertini & A. Luigi Materazzi & Franco Cotana - 310-322 On the development, testing and performance evaluation of energy efficient coatings for buildings
by Charikleia Anestopoulou & Chrysanthi Efthymiou & Dimitris Kokkonis & Mattheos Santamouris - 323-329 Stratum ventilation — a low-carbon way to thermal comfort and indoor air quality
by Zhang Lin - 330-334 Removal of carbon dioxide in the indoor environment with sorption-type air filters
by Shih-Cheng Hu & Angus Shiue & Shu-Mei Chang & Ya-Ting Chang & Chao-Heng Tseng & Chuang-Cheng Mao & Arson Hsieh & Andrew Chan
2017, Volume 12, Issue 2
- 67-74 Analysis of environmental performance of indoor living walls using embodied energy and carbon
by Sam C. M. Hui & T. C. Ma - 75-83 Sensitivity analysis of the probability-based inverse modeling method for indoor contaminant tracking
by Zhiqiang (John) Zhai & Xiang Liu - 84-95 Evolving ICA and HGAPSO algorithms for prediction of outlet temperatures of constructed solar chimney
by Mehran Ghalamchi & Alibakhsh Kasaeian & Mohammad Hossein Ahmadi & Mehrdad Ghalamchi - 96-109 Energy efficiency opportunities in the service plants of cast iron foundries in Italy
by Renato M. Lazzarin & Marco Noro - 110-125 Experimental evaluation of a liquid desiccant air conditioning system for tri-generation/waste-heat-driven applications
by Theo Elmer & Mark Worall & Shenyi Wu & Saffa Riffat - 126-135 A smart building material for low/zero carbon applications: heat insulation solar glass—characteristic results from laboratory and in situ tests
by Erdem Cuce & Saffa B. Riffat - 136-140 Developments in the quality of treated greywater supplies for buildings, and associated user perception and acceptance
by K. Hyde & M.J. Smith & K. Adeyeye - 141-161 Design and performance analysis of a zero-energy settlement in Greece
by Fabrizio Ascione & Nicola Bianco & Rosa Francesca De Masi & Maria Dousi & S. Hionidis & S. Kaliakos & Elena Mastrapostoli & Michael Nomikos & Mattheos Santamouris & Afroditi Synnefa & Giuseppe Peter Vanoli & Kostantina Vassilakopoulou - 162-170 Modeling and performance analyses of fin-and-tube heat exchanger operating under frost conditions
by Yi-Guang Chen & Qing-Yang Jiang & Ji-Chun Yang & Jing-Xin Hou & Xiao-Yan Wu - 171-180 Efficiency increase in carbon dioxide refrigeration technology with parallel compression
by H. Fritschi & F. Tillenkamp & R. Löhrer & M. Brügger - 181-188 Wireless Energy Behaviour monitoring (Wi-be) for office buildings
by Li Shao & Robert Foster & Michael Coleman & Kate Irvine & Mark Lemon & Yang Hao - 189-207 Validation of integrated performance model for sustainable envelope performance assessment and design
by Joseph Iwaro & Abrahams Mwasha & Pramenath Narinesingh - 208-223 Impacts of dynamic interactions on the predicted thermal performance of earth–air heat exchangers for preheating, cooling and ventilation of buildings
by Guohui Gan
2017, Volume 12, Issue 1
- 1-23 Nanofluid and nanocomposite applications in solar energy conversion systems for performance enhancement: a review
by K.S. Reddy & Nikhilesh R. Kamnapure & Shreekant Srivastava - 24-35 Desalination technology selection using multi-criteria evaluation: TOPSIS and PROMETHEE-2
by P. Vivekh & M. Sudhakar & M. Srinivas & V. Vishwanthkumar - 36-42 Experimental study on indoor air thermal equilibrium model of the tent
by Lili Zhang & Yan Yu & Long Xu & Wei Zhang & Qiong Shen - 43-50 Investigation on the heat transfer of energy piles with two-dimensional groundwater flow
by Wenke Zhang & Hongxing Yang & Lin Lu & Zhaohong Fang - 51-53 Thermal performance evaluation on vacuum insulation panels in composite building envelope under large temperature variations
by Ankang Kan & Jin Hu - 54-65 Thermodynamic and economic evaluation of a small-scale organic Rankine cycle integrated with a concentrating solar collector
by Milad Ashouri & Fatemeh Razi Astaraei & Roghaye Ghasempour & M.H. Ahmadi & Michel Feidt
2016, Volume 11, Issue 3
- 283-295 The performance and in-use experience of low to zero carbon technologies in an experimental energy home
by Nina Hormazábal & Mark Gillott & Brian Ford - 296-304 Towards clean and sustainable distributed energy system: the potential of integrated PEMFC-CHP
by I. Aleknaviciute & T.G. Karayiannis & M.W. Collins & C. Xanthos - 305-316 Investigating the potential of adding thermal mass to mitigate overheating in a super-insulated low-energy timber house
by Lucelia Rodrigues & Vasileios Sougkakis & Mark Gillott - 317-324 Thermodynamic analysis and optimization of the Atkinson engine by using NSGA-II
by Mohammad Hossein Ahmadi & Mohammad Ali Ahmadi & Arash Shafaei & Milad Ashouri & Somayeh Toghyani - 325-332 Applying a sophisticated approach to predict CO2 solubility in brines: application to CO2 sequestration
by Mohammad Ali Ahmadi & Alireza Ahmadi - 333-337 Improving photovoltaics performance by using yellow petroleum jelly as phase change material
by Yuli Setyo Indartono & Aryadi Suwono & Fendy Yuseva Pratama - 338-348 Numerical assessment of energy contribution by building integrated photovoltaics in a commercial/office building refurbishment in UK
by C.U. Ikedi & M.I. Okoroh & A.M. Dean - 349-362 Endoreversible modeling and optimization of multistage isothermal chemical engines under linear mass transfer law via Hamilton–Jacobi–Bellman theory
by Shaojun Xia & Lingen Chen & Fengrui Sun - 363-369 Performance study of a static low-concentration evacuated tube solar collector for medium-temperature applications
by Guiqiang Li & Gang Pei & Yuehong Su & Jie Ji & Dongyue Wang & Hongfei Zheng - 370-374 Alternative coating technologies for metal–ceramic nanocomposite films: potential application for solar thermal absorber
by F. Bensebaa & D. Di Domenicantonio & L. Scoles & D. Kingston & P. Mercier & G. Marshall - 375-382 Effects of thermocouples’ physical size on the performance of the TEG–TEH system
by Fankai Meng & Lingen Chen & Fengrui Sun - 383-392 Heating load and COP optimization of a double resonance energy selective electron (ESE) heat pump
by Zemin Ding & Lingen Chen & Fengrui Sun - 393-399 Effect of the working liquid to the capillary pumped loop performance
by Nikolaos A. Avgerinos & Dionissios P. Margaris & Demos T. Tsahalis - 400-415 Newly invented biobased materials from low-carbon, diverted waste fibers: research methods, testing, and full-scale application in a case study structure
by Julee A Herdt & John Hunt & Kellen Schauermann - 416-423 Review of heat pipe heat exchangers for enhanced dehumidification and cooling in air conditioning systems
by K. S. Ong - 424-430 A comprehensive assessment of sectoral energy consumption in the UK: past, present and future
by Erdem Cuce & Saffa B. Riffat - 431-439 Design and optimization of a thermoacoustic heat engine using reinforcement learning
by Jurriath-Azmathi Mumith & Tassos Karayiannis & Charalampos Makatsoris
2016, Volume 11, Issue 2
- 141-156 Investigation of the effect of design parameters on power output and thermal efficiency of a Stirling engine by thermodynamic analysis
by Mohammad Hossein Ahmadi & Mohammad Ali Ahmadi & Mehdi Mehrpooya - 157-168 Mean-line modeling and CFD analysis of a miniature radial turbine for distributed power generation systems
by Kiyarash Rahbar & Saad Mahmoud & Raya K. Al-Dadah - 169-176 Performance analysis of a cascaded solar Organic Rankine Cycle with superheating
by Jie Zhu & Hulin Huang - 177-183 Spanish photovoltaic learning curve
by Maria Rosario Garzón Sampedro & Carlos Sanchez Gonzalez - 184-192 Experimental study of a capillary pumped loop in comparison with the prediction of a 3D CFD
by Nikolaos A. Avgerinos & Dionissios P. Margaris & Demos T. Tsahalis - 193-198 Energy saving potential of indirect evaporative cooler under Indian climates
by J.K. Jain & D.A. Hindoliya - 199-204 Development of a nano-heat transfer fluid carrying direct absorbing receiver for concentrating solar collectors
by Ashley Toppin-Hector & Harjit Singh - 205-210 Hybrid hydrogen PEM fuel cell and batteries without DC–DC converter
by Jinlei Shang & Kevin Kendall & Bruno G. Pollet - 211-221 Energy and exergy analysis of passive solar distillation systems
by K.R. Ranjan & S.C. Kaushik & N.L. Panwar - 222-234 Design and commission a zero-carbon building for hot and humid climate
by Trevor S.K. Ng & Raymond M.H. Yau & Tony N.T. Lam & Vincent S.Y. Cheng - 235-239 A feasible energy-saving analysis of a new system for CO2 cryogenic capture
by Shuhong Li & Jie Ding & Xiaosong Zhang & Deyuan Cheng & Xinyu Hu & Xianliang Li - 240-247 Simultaneous synthesis of heat exchanger network with the non-isothermal mixing
by Zhao Liang & Yin Hongchao & Huo Zhaoyi - 248-253 Performance of U-tube solar water heater with vertical and inclined panels
by K.S. Ong & W.L. Tong & J.K. Choong - 254-265 An innovative psychometric solar-powered water desalination system
by Mahmoud Shatat & Saffa Riffat & Guohui Gan - 266-274 Capturing atmospheric carbon: biological and nonbiological methods
by Panchsheela Nogia & Gurpreet Kaur Sidhu & Rajesh Mehrotra & Sandhya Mehrotra - 275-282 Thermal analysis of PCM-filled glass windows in hot summer and cold winter area
by Shuhong Li & Yingying Zhou & Kecheng Zhong & Xiaosong Zhang & Xing Jin
2016, Volume 11, Issue 1
- 1-7 Thermodynamic optimization of a triple-shaft open intercooled-recuperated gas turbine cycle. Part 1: description and modeling
by Lingen Chen & Wenhua Wang & Fengrui Sun - 8-15 Economic feasibility evaluation of solar distillation systems based on the equivalent cost of environmental degradation and high-grade energy savings
by K. R. Ranjan & S. C. Kaushik - 16-28 Thermal modeling and experimental validation of solar tunnel dryer: a clean energy option for drying surgical cotton
by N. L. Panwar & S. C. Kaushik & Surendra Kothari - 29-34 Thermodynamic optimization of a triple-shaft open intercooled, recuperated gas turbine cycle. Part 2: power and efficiency optimization
by Wenhua Wang & Lingen Chen & Fengrui Sun - 35-41 Thermochemical cooling system based on adsorption pumping pipe
by Saffa Riffat & Yuehong Su & Yate Ding - 42-53 Power and power density analyzes of an endoreversible modified variable-temperature reservoir Brayton cycle with isothermal heat addition
by Junhua Wang & Lingen Chen & Yanlin Ge & Fengrui Sun - 54-60 Transient simulation of a solar absorption cooling system
by Akshaya Budania & Suhail Ahmad & Sanjeev Jain - 61-65 Toolbox engineering software for the analysis of sunlight on buildings
by A. Márquez-García & M. Varo-Martínez & R. López-Luque - 66-74 Electricity use in the commercial kitchen
by S. Mudie & E.A. Essah & A. Grandison & R. Felgate - 75-88 Energy performance of a residential building-integrated micro-cogeneration system upon varying thermal load and control logic
by G. Ciampi & A. Rosato & M. Scorpio & S. Sibilio - 89-108 An integrated approach for sustainable design and assessment of residential building envelope: part II
by Joseph Iwaro & Abrahams Mwasha & Rupert G. Williams & William Wilson - 109-118 Control of micro-CHP and thermal energy storage for minimising electrical grid utilisation
by John Allison & Gavin Bruce Murphy & John Mark Counsell - 119-129 Effect of flow pulsation on energy consumption of a radiator in a centrally heated building
by M. Embaye & R.K. AL-Dadah & S. Mahmoud - 130-139 Simulating the influence of microclimatic design on mitigating the Urban Heat Island effect in the Hangzhou Metropolitan Area of China
by T. Shen & D. H. C. Chow & J. Darkwa
2015, Volume 10, Issue 4
- 321-331 Experimental analysis of an unconventional desiccant-based air-conditioning system: the influence of cooling air flow and chiller on the energy and environmental performance
by G. Angrisani & F. Minichiello & M. Sasso - 332-346 Design configurations analysis of wind-induced natural ventilation tower in hot humid climate using computational fluid dynamics
by Chin Haw Lim & Omidreza Saadatian & Kamaruzzaman Sopian & M. Yusof Sulaiman & Sohif Mat & Elias Salleh & K.C. Ng - 347-353 Skills development for retrofitting a historic listed building in Scotland
by Mohamed Abdel-Wahab & Amar Bennadji - 354-364 Study into solar-still performance under sealed and unsealed conditions
by Rohit Pillai & A. T. Libin & M. Mani - 365-373 Analysis of a SrCl2–NH3 solid sorption refrigeration system
by K. NagaMalleswara Rao & M. Ram Gopal & Souvik Bhattacharyya - 374-378 Comparison of sustainable information technologies for companies
by Onur Kartal & Aslı Gül Öncel - 379-385 Building integration of solar renewable energy systems towards zero or nearly zero energy buildings
by Soteris A. Kalogirou - 386-392 A sustainable transport solution for a Slovenia town
by Matjaž Knez & Ali Naci Celik & Tariq Muneer - 393-404 Existing buildings' operation and maintenance: renovation project of Chow Yei Ching Building at the University of Hong Kong
by Sun Xiaonuan & Stephen LAU SiuYu - 405-411 Energy savings analysis of fuel-cell microgeneration systems with ground source heat pumps in load-sharing buildings
by Soolyeon Cho & Eun Chul Kang & Euy Joon Lee - 412-419 Feasibility and optimization of aerogel glazing system for building energy efficiency in different climates
by Huan Wang & Huijun Wu & Yunfei Ding & Jingchen Feng & Shengwei Wang