IDEAS home Printed from https://ideas.repec.org/a/oup/ijlctc/v13y2018i3p218-230..html
   My bibliography  Save this article

Uniformity characteristic and calibration of simple low cost compact halogen solar simulator for indoor experiments

Author

Listed:
  • Erkata Yandri

Abstract

The aim of this article is to discuss in detail, the development of a simple low cost halogen compact solar simulator, including characteristics and calibration. This compact type simulator is expected to be easy to use, set up and move around. We used tungsten halogen incandescent lamps because they are accessible, cheap and work steadily with simple power supply. It is also quick and easy to construct with simple equipment. The construction of the simulator consists of two main parts; the collector module and halogen light sources. The unit dimensions are 430 mm × 390 mm × 1000 mm, and made with an aluminum frame. The collector module faces downwards to the light source, which was placed at the bottom. This method aimed to reduce the interference of light entering from the outside and is captured by the surface of the collector. The result shows that the maximum relative intensity reflects to the center and become non-uniform when shifting to the edge. The optimal distance between the light surface simulator and the test plane was 32 cm, giving the maximum non-uniformity of 9.7%, which is still within the limits allowed by British Standards for solar simulator testing. For non-uniformity limit requirement ≤5%, then the test field covered is 0.54 of the simulator area. Due to the high heat emitted by the halogen bulbs, the PV power output decreased with a gradient of ΔPpv/ΔTpv≈−0.36%/°C as well as the PV efficiency also decreases Δηpv/ΔTpv≈−0.076%/°C. Although the PV output of the simulator and the sunlight with the filter differ, the PV output behavior of the simulator is similar to filtered sunlight. From the filter and outdoor calibration test, indicating that experiments with the simulator can correlate to experiments using sunlight. The ratio of indoor to outdoor measurement results is close to 50%. The current simulator is used as an approximation of solar test performance which contributes to determine the proper design parameters, for further improvement and flexibility applications.

Suggested Citation

  • Erkata Yandri, 2018. "Uniformity characteristic and calibration of simple low cost compact halogen solar simulator for indoor experiments," International Journal of Low-Carbon Technologies, Oxford University Press, vol. 13(3), pages 218-230.
    • Handle: RePEc:oup:ijlctc:v:13:y:2018:i:3:p:218-230.
    as

    Download full text from publisher

    File URL: http://hdl.handle.net/10.1093/ijlct/cty018
    Download Restriction: Access to full text is restricted to subscribers.
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Radziemska, E., 2003. "The effect of temperature on the power drop in crystalline silicon solar cells," Renewable Energy, Elsevier, vol. 28(1), pages 1-12.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Zhenpeng & Ma, Tao & Zhao, Jiaxin & Song, Aotian & Cheng, Yuanda, 2019. "Experimental study and performance analysis on solar photovoltaic panel integrated with phase change material," Energy, Elsevier, vol. 178(C), pages 471-486.
    2. Sargunanathan, S. & Elango, A. & Mohideen, S. Tharves, 2016. "Performance enhancement of solar photovoltaic cells using effective cooling methods: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 64(C), pages 382-393.
    3. Kahoul, Nabil & Chenni, Rachid & Cheghib, Hocine & Mekhilef, Saad, 2017. "Evaluating the reliability of crystalline silicon photovoltaic modules in harsh environment," Renewable Energy, Elsevier, vol. 109(C), pages 66-72.
    4. Gan Huang & Jingyuan Xu & Christos N. Markides, 2023. "High-efficiency bio-inspired hybrid multi-generation photovoltaic leaf," Nature Communications, Nature, vol. 14(1), pages 1-10, December.
    5. Wilson, Earle, 2009. "Theoretical and operational thermal performance of a ‘wet’ crystalline silicon PV module under Jamaican conditions," Renewable Energy, Elsevier, vol. 34(6), pages 1655-1660.
    6. Erdil, Erzat & Ilkan, Mustafa & Egelioglu, Fuat, 2008. "An experimental study on energy generation with a photovoltaic (PV)–solar thermal hybrid system," Energy, Elsevier, vol. 33(8), pages 1241-1245.
    7. Stropnik, Rok & Stritih, Uroš, 2016. "Increasing the efficiency of PV panel with the use of PCM," Renewable Energy, Elsevier, vol. 97(C), pages 671-679.
    8. Senturk, Ali, 2020. "Investigation of datasheet provided temperature coefficients of photovoltaic modules under various sky profiles at the field by applying a new validation procedure," Renewable Energy, Elsevier, vol. 152(C), pages 644-652.
    9. Hamed, Tareq Abu & Alshare, Aiman & El-Khalil, Hossam, 2019. "Passive cooling of building-integrated photovolatics in desert conditions: Experiment and modeling," Energy, Elsevier, vol. 170(C), pages 131-138.
    10. Abdmouleh, Zeineb & Alammari, Rashid A.M. & Gastli, Adel, 2015. "Recommendations on renewable energy policies for the GCC countries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 50(C), pages 1181-1191.
    11. Makki, Adham & Omer, Siddig & Sabir, Hisham, 2015. "Advancements in hybrid photovoltaic systems for enhanced solar cells performance," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 658-684.
    12. Jae Woo Ko & Hae Lim Cha & David Kwang-Soon Kim & Jong Rok Lim & Gyu Gwang Kim & Byeong Gwan Bhang & Chang Sub Won & Han Sang Jung & Dong Hyung Kang & Hyung Keun Ahn, 2017. "Safety Analysis of Grounding Resistance with Depth of Water for Floating PVs," Energies, MDPI, vol. 10(9), pages 1-12, September.
    13. Ren, Xiao & Li, Jing & Hu, Mingke & Pei, Gang & Jiao, Dongsheng & Zhao, Xudong & Ji, Jie, 2019. "Feasibility of an innovative amorphous silicon photovoltaic/thermal system for medium temperature applications," Applied Energy, Elsevier, vol. 252(C), pages 1-1.
    14. Idris Al Siyabi & Arwa Al Mayasi & Aiman Al Shukaili & Sourav Khanna, 2021. "Effect of Soiling on Solar Photovoltaic Performance under Desert Climatic Conditions," Energies, MDPI, vol. 14(3), pages 1-18, January.
    15. Siddiqui, Osman K. & Zubair, Syed M., 2017. "Efficient energy utilization through proper design of microchannel heat exchanger manifolds: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 969-1002.
    16. Chia-Nan Wang & Van Tran Hoang Viet & Thanh Phong Ho & Van Thanh Nguyen & Syed Tam Husain, 2020. "Optimal Site Selection for a Solar Power Plant in the Mekong Delta Region of Vietnam," Energies, MDPI, vol. 13(16), pages 1-20, August.
    17. Ling, Ziye & Zhang, Zhengguo & Shi, Guoquan & Fang, Xiaoming & Wang, Lei & Gao, Xuenong & Fang, Yutang & Xu, Tao & Wang, Shuangfeng & Liu, Xiaohong, 2014. "Review on thermal management systems using phase change materials for electronic components, Li-ion batteries and photovoltaic modules," Renewable and Sustainable Energy Reviews, Elsevier, vol. 31(C), pages 427-438.
    18. Hasan, Ahmed & Sarwar, Jawad & Shah, Ali Hasan, 2018. "Concentrated photovoltaic: A review of thermal aspects, challenges and opportunities," Renewable and Sustainable Energy Reviews, Elsevier, vol. 94(C), pages 835-852.
    19. Zia R. Tahir & Ammara Kanwal & Muhammad Asim & M. Bilal & Muhammad Abdullah & Sabeena Saleem & M. A. Mujtaba & Ibham Veza & Mohamed Mousa & M. A. Kalam, 2022. "Effect of Temperature and Wind Speed on Efficiency of Five Photovoltaic Module Technologies for Different Climatic Zones," Sustainability, MDPI, vol. 14(23), pages 1-32, November.
    20. Benlioğlu, Muhammet Mustafa & Karaağaç, Mehmet Onur & Ergün, Alper & Ceylan, İlhan & Ali, İsmail Hamad Guma, 2023. "A detailed analysis of a novel auto-controlled solar drying system combined with thermal energy storage concentrated solar air heater (CSAC) and concentrated photovoltaic/thermal (CPV/T)," Renewable Energy, Elsevier, vol. 211(C), pages 420-433.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:oup:ijlctc:v:13:y:2018:i:3:p:218-230.. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Oxford University Press (email available below). General contact details of provider: https://academic.oup.com/ijlct .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.