Contact information of Elsevier
Serial Information
Download restrictions: Full text for ScienceDirect subscribers only
Series handle: RePEc:eee:recore
ISSN: 0921-3449
Citations RSS feed: at CitEc
Impact factors
Access and download statisticsTop item:
Corrections
All material on this site has been provided by the respective publishers and authors. You can help
correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:recore. See general information about how to correct material in RePEc.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Kai Meng (email available below). General contact details of provider: https://www.journals.elsevier.com/resources-conservation-and-recycling .
Content
2015, Volume 105, Issue PA
- 1-10 Overview of membrane technology applications for industrial wastewater treatment in China to increase water supply
by Zheng, Xiang & Zhang, Zhenxing & Yu, Dawei & Chen, Xiaofen & Cheng, Rong & Min, Shang & Wang, Jiangquan & Xiao, Qingcong & Wang, Jihua
- 11-17 Making green technology greener: Achieving a balance between carbon and resource savings through ecodesign in hydropower systems
by Gallagher, John & Styles, David & McNabola, Aonghus & Williams, A. Prysor
- 18-28 Strategies for local authorities to achieve the EU 2020 50% recycling, reuse and composting target: A case study of England
by Waite, Steve & Cox, Paul & Tudor, Terry
- 29-35 Designers’ attitude and behaviour towards construction waste minimization by design: A study in Shenzhen, China
by Li, Jingru & Tam, Vivian W.Y. & Zuo, Jian & Zhu, Jiaolan
- 36-48 Substance flow analysis of copper in production stage in the U.S. from 1974 to 2012
by Wang, Minxi & Chen, Wu & Li, Xin
- 49-58 Benchmarking construction waste management performance using big data
by Lu, Weisheng & Chen, Xi & Peng, Yi & Shen, Liyin
- 59-72 Life cycle greenhouse gas analysis of bioenergy generation alternatives using forest and wood residues in remote locations: A case study in British Columbia, Canada
by Cambero, Claudia & Hans Alexandre, Mariane & Sowlati, Taraneh
- 73-83 A model for partnering with the informal e-waste industry: Rationale, principles and a case study
by Davis, John-Michael & Garb, Yaakov
- 84-94 Analysis of profitability of rainwater harvesting, gray water recycling and drain water heat recovery systems
by Stec, Agnieszka & Kordana, Sabina
- 95-112 Review and assessment of the adaptive capacity of the water sector in Cyprus against climate change impacts on water availability
by Papadaskalopoulou, C. & Katsou, E. & Valta, K. & Moustakas, K. & Malamis, D. & Dodou, M.
- 113-122 Life cycle assessment of ferronickel production in Greece
by Bartzas, Georgios & Komnitsas, Kostas
- 123-133 A Danish–Vietnamese partnership for business and technology development in solid waste management
by Christensen, David & Bach, Leu Tho
- 134-142 Compostable biopolymer use in the real world: Stakeholder interviews to better understand the motivations and realities of use and disposal in the US
by Meeks, Diana & Hottle, Troy & Bilec, M.M. & Landis, A.E.
- 143-147 Climatic and spatial variability of potential rainwater savings for a large coastal city
by Imteaz, Monzur Alam & Paudel, Upendra & Ahsan, Amimul & Santos, Cristina
- 148-159 Survey of the current status of sustainable concrete production in the U.S
by Jin, Ruoyu & Chen, Qian & Soboyejo, Alfred
- 160-166 Embodied carbon of building products during their supply chains: Case study of aluminium window in Australia
by Seo, Seongwon & Kim, Junbeum & Yum, Kwok-Keung & McGregor, James
- 167-176 Waste minimisation through deconstruction: A BIM based Deconstructability Assessment Score (BIM-DAS)
by Akinade, Olugbenga O. & Oyedele, Lukumon O. & Bilal, Muhammad & Ajayi, Saheed O. & Owolabi, Hakeem A. & Alaka, Hafiz A. & Bello, Sururah A.
- 177-185 E-waste flow among selected institutions of higher learning using material flow analysis model
by Agamuthu, P. & Kasapo, Pearson & Mohd Nordin, Nurul Ain
- 186-197 Greenhouse gas emission factors for recycling of source-segregated waste materials
by Turner, David A. & Williams, Ian D. & Kemp, Simon
- 198-210 Mitigating pollution of hazardous materials from WEEE of China: Portfolio selection for a sustainable future based on multi-criteria decision making
by An, Da & Yang, Yu & Chai, Xilong & Xi, Beidou & Dong, Lichun & Ren, Jingzheng
2015, Volume 104, Issue PB
- 334-347 Reprint of “Green decision-making model in reverse logistics using FUZZY-VIKOR method”
by Haji Vahabzadeh, Ali & Asiaei, Arash & Zailani, Suhaiza
- 348-353 Risk and benefits brought by formal sustainability programs on fashion enterprises under market disruption
by Li, Wing-Yan & Choi, Tsan-Ming & Chow, Pui-Sze
- 354-365 Multi-period closed-loop supply chain network equilibrium with carbon emission constraints
by Tao, Zhang Gui & Guang, Zhong Yong & Hao, Sun & Song, Hu Jin & Xin, Dai Geng
- 366-374 Green supply chain management and firms’ performance: Understanding potential relationships and the role of green sourcing and some other green practices
by Jabbour, Ana Beatriz Lopes de Sousa & Frascareli, Fernanda Cortegoso de Oliveira & Jabbour, Charbel José Chiappetta
- 375-390 Risk analysis in green supply chain using fuzzy AHP approach: A case study
by Mangla, Sachin Kumar & Kumar, Pradeep & Barua, Mukesh Kumar
- 391-404 Stochastic reverse logistics network design for waste of electrical and electronic equipment
by Ayvaz, Berk & Bolat, Bersam & Aydın, Nezir
- 405-416 Risk evaluation for recycled aggregate according to deleterious impurity content considering deconstruction scenarios and production methods
by Noguchi, Takafumi & Park, Won-Jun & Kitagaki, Ryoma
- 417-426 Re-use assessment of thermoset composite wastes as aggregate and filler replacement for concrete-polymer composite materials: A case study regarding GFRP pultrusion wastes
by Ribeiro, M.C.S. & Meira-Castro, A.C. & Silva, F.G. & Santos, J. & Meixedo, J.P. & Fiúza, A. & Dinis, M.L. & Alvim, M.R.
2015, Volume 104, Issue PA
- 1-11 A structure–efficiency based performance evaluation of the urban water cycle in northern China and its policy implications
by Chu, Junying & Wang, Jianhua & Wang, Can
- 12-18 On the sustainability of cobalt utilization in China
by Zeng, Xianlai & Li, Jinhui
- 19-30 Geospatial and AHP-multicriteria analyses to locate and rank suitable sites for groundwater recharge with reclaimed water
by Gdoura, Khadija & Anane, Makram & Jellali, Salah
- 31-37 Urban household solid waste generation and collection in Beijing, China
by Liu, Tingting & Wu, Yufeng & Tian, Xi & Gong, Yu
- 38-48 Environmental assessment of recycled mineral wool and polypropylene utilized in wood polymer composites
by Väntsi, Olli & Kärki, Timo
- 49-60 Solid waste pollution concern in economic value assessment: Is it uni-dimensional or multi-dimensional?
by Adam, Shehu Usman & Shamsudin, Mad Nasir & Sidique, Shaufique F. & Rahim, Khalid Abdul & Radam, Alias
- 61-67 Reliability and economic analysis of urban rainwater harvesting in a megacity in Bangladesh
by Karim, Md. Rezaul & Bashar, Mohammad Zobair Ibne & Imteaz, Monzur Alam
- 68-75 Resources saving and emissions reduction of the aluminum industry in China
by Yue, Qiang & Wang, Heming & Gao, Chengkang & Du, Tao & Liu, Liying & Lu, Zhongwu
- 76-93 Recycling of rare earths from fluorescent lamps: Value analysis of closing-the-loop under demand and supply uncertainties
by Machacek, Erika & Richter, Jessika Luth & Habib, Komal & Klossek, Polina
- 94-102 An examination of the product development process for fashion remanufacturing
by Dissanayake, Geetha & Sinha, Pammi
- 103-108 Effective approaches to reduce greenhouse gas emissions from waste to energy process: A China study
by Wang, Yuan & Yan, Yuanyuan & Chen, Guanyi & Zuo, Jian & Du, Huibin
- 109-119 Decentralized options for faecal sludge management in urban slum areas of Sub-Saharan Africa: A review of technologies, practices and end-uses
by Semiyaga, Swaib & Okure, Mackay A.E. & Niwagaba, Charles B. & Katukiza, Alex Y. & Kansiime, Frank
- 120-130 The role of geometric characterization in supporting structural steel reuse decisions
by Yeung, Jamie & Walbridge, Scott & Haas, Carl
- 131-140 Optimal sizing of storage tanks in domestic rainwater harvesting systems: A linear programming approach
by Okoye, Chiemeka Onyeka & Solyalı, Oğuz & Akıntuğ, Bertuğ
- 141-151 Environmental and economic analyses of recycled asphalt concrete mixtures based on material production and potential performance
by Yang, Rebekah & Kang, Seunggu & Ozer, Hasan & Al-Qadi, Imad L.
- 152-161 Biogas digestate marketing: Qualitative insights into the supply side
by Dahlin, Johannes & Herbes, Carsten & Nelles, Michael
- 162-171 Information sharing and curbside recycling: A pilot study to evaluate the value of door-to-door distribution of informational literature
by Willman, Kenneth W.
- 172-180 Water recycling and reuse in soft drink/beverage industry: A case study for sustainable industrial water management in Turkey
by Alkaya, Emrah & Demirer, Göksel Niyazi
- 181-193 Involving integrated seawater desalination-power plants in the optimal design of water distribution networks
by González-Bravo, Ramón & Nápoles-Rivera, Fabricio & Ponce-Ortega, José María & El-Halwagi, Mahmoud M.
- 194-205 Evolution and present status of silicon carbide slurry recovery in silicon wire sawing
by Gopala Krishna Murthy, H.S.
- 206-212 Industrial ecology-based strategies to reduce the embodied CO2 of magnesium metal
by Kwon, Gui-Rok & Woo, Seung H. & Lim, Seong-Rin
- 213-223 Life cycle assessment of cotton textile products in Turkey
by Baydar, G. & Ciliz, N. & Mammadov, A.
- 224-238 Comparative life cycle assessment of asphalt pavements using reclaimed asphalt, warm mix technology and cold in-place recycling
by Giani, Martina Irene & Dotelli, Giovanni & Brandini, Nicolò & Zampori, Luca
- 239-253 Waste-to-fuel opportunities for British quick service restaurants: A case study
by Velazquez Abad, Anthony & Cherrett, Tom & Holdsworth, Peter
- 254-264 How social ties influence metal resource flows in the Bangladesh ship recycling industry
by Mizanur Rahman, S.M. & Mayer, Audrey L.
- 265-275 The energy balance of utilising meadow grass in Danish biogas production
by Meyer, A.K.P. & Raju, C.S. & Kucheryavskiy, S. & Holm-Nielsen, J.B.
- 276-290 Recycling indium from waste LCDs: A review
by Zhang, Kaihua & Wu, Yufeng & Wang, Wei & Li, Bin & Zhang, Yinan & Zuo, Tieyong
- 291-299 Public perception and acceptability toward reclaimed water in Tianjin
by Gu, Qianxin & Chen, Yang & Pody, Robert & Cheng, Rong & Zheng, Xiang & Zhang, Zhenxing
- 300-310 Potential metal requirement of active materials in lithium-ion battery cells of electric vehicles and its impact on reserves: Focus on Europe
by Simon, Bálint & Ziemann, Saskia & Weil, Marcel
- 311-316 An industrial ecology approach to municipal solid waste management: I. Methodology
by Smith, R.L. & Sengupta, D. & Takkellapati, S. & Lee, C.C.
- 317-326 An industrial ecology approach to municipal solid waste management: II. Case studies for recovering energy from the organic fraction of MSW
by Smith, R.L. & Sengupta, D. & Takkellapati, S. & Lee, C.C.
2015, Volume 103, Issue C
- 1-8 Selecting a location to install a plastic processing center: Network of recycling cooperatives
by Fidelis, Reginaldo & Ferreira, Marco Antonio & Colmenero, João Carlos
- 9-18 Towards a sustainable use of primary boron. Approach to a sustainable use of primary resources
by Henckens, M.L.C.M. & Driessen, P.P.J. & Worrell, E.
- 19-28 Mapping the global flow of tungsten to identify key material efficiency and supply security opportunities
by Leal-Ayala, David R. & Allwood, Julian M. & Petavratzi, Evi & Brown, Teresa J. & Gunn, Gus
- 29-46 Motivating metrics for household water-use feedback
by Liu, Ariane & Giurco, Damien & Mukheibir, Pierre
- 47-57 Prospective life cycle assessment of an antibacterial T-shirt and supporting business decisions to create value
by Manda, B. M. Krishna & Worrell, Ernst & Patel, Martin K.
- 58-68 Factors affecting consumers’ choices concerning sustainable packaging during product purchase and recycling
by Martinho, Graça & Pires, Ana & Portela, Gonçalo & Fonseca, Miguel
- 69-76 Wasteful tourism in developing economy? A present situation and sustainable scenarios
by Manomaivibool, Panate
- 77-84 Assessment of farmers’ knowledge on fertilizer usage for peri-urban vegetable production in the Sunyani Municipality, Ghana
by Obour, Peter Bilson & Dadzie, Frederick Asankom & Kristensen, Hanne Lakkenborg & Rubæk, Gitte Holton & Kjeldsen, Chris & Saba, Courage Kosi Setsoafia
- 85-97 The economic conditions for urban infrastructure mining: Using GIS to prospect hibernating copper stocks
by Wallsten, Björn & Magnusson, Dick & Andersson, Simon & Krook, Joakim
- 98-109 Strategic management of WEEE in Switzerland—combining material flow analysis with structural analysis
by Duygan, Mert & Meylan, Grégoire
- 110-124 Value in sustainable materials management strategies for open economies case of Flanders (Belgium)
by Christis, Maarten & Geerken, Theo & Vercalsteren, An & Vrancken, Karl C.
- 125-138 Green decision-making model in reverse logistics using FUZZY-VIKOR method
by Haji Vahabzadeh, Ali & Asiaei, Arash & Zailani, Suhaiza
- 139-154 Aluminium for the future: Modelling the global production, market supply, demand, price and long term development of the global reserves
by Sverdrup, Harald U. & Ragnarsdottir, Kristin Vala & Koca, Deniz
- 155-170 Sustainability by cyclic manufacturing: Assessment of resource preservation under uncertain growth and returns
by Tsiliyannis, Christos Aristeides
- 171-178 Agent-based life cycle assessment for switchgrass-based bioenergy systems
by Bichraoui-Draper, Najet & Xu, Ming & Miller, Shelie A. & Guillaume, Bertrand
- 179-191 Analysis and comparison of used lubricants, regenerative technologies in the world
by Jafari, Ahmad Jonidi & Hassanpour, Malek
- 192-204 Use of recycled construction and demolition materials in geotechnical applications: A review
by Vieira, Castorina Silva & Pereira, Paulo M.
- 205-215 Concrete transformation of buildings in China and implications for the steel cycle
by Wang, Tao & Tian, Xin & Hashimoto, Seiji & Tanikawa, Hiroki
2015, Volume 102, Issue C
- 1-8 What drives an environmental horticultural firm to start recycling plastics? Results of a Georgia survey
by Meng, Ting & Klepacka, Anna M. & Florkowski, Wojciech J. & Braman, Kristine
- 9-19 Why doorstepping can increase household waste recycling
by Dai, Y.C. & Gordon, M.P.R. & Ye, J.Y. & Xu, D.Y. & Lin, Z.Y. & Robinson, N.K.L. & Woodard, R. & Harder, M.K.
- 20-26 Status of urban wood-waste and their potential use for sustainable bioenergy in Mississippi
by Joshi, Omkar & Grebner, Donald L. & Khanal, Puskar N.
- 27-38 Resource usage of integrated Pig–Biogas–Fish system: Partitioning and substitution within attributional life cycle assessment
by Nhu, Trang T. & Dewulf, Jo & Serruys, Pieterjan & Huysveld, Sophie & Nguyen, Cong V. & Sorgeloos, Patrick & Schaubroeck, Thomas
- 39-48 Agriculture biomass in India: Part 1. Estimation and characterization
by Cardoen, Dennis & Joshi, Piyush & Diels, Ludo & Sarma, Priyangshu M. & Pant, Deepak
- 49-57 Management of solid wastes from steelmaking and galvanizing processes: A brief review
by Lobato, Natália Cristina Candian & Villegas, Edwin Auza & Mansur, Marcelo Borges
- 58-66 Importance of food waste pre-treatment efficiency for global warming potential in life cycle assessment of anaerobic digestion systems
by Carlsson, My & Naroznova, Irina & Møller, Jacob & Scheutz, Charlotte & Lagerkvist, Anders
- 67-79 Environmental and economic assessment of ‘open waste dump’ mining in Sri Lanka
by Maheshi, Danthurebandara & Steven, Van Passel & Karel, Van Acker
- 80-93 Component end-of-life management: Exploring opportunities and related benefits of remanufacturing and functional recycling
by Diener, Derek L. & Tillman, Anne-Marie
- 94-100 Household recycling knowledge, attitudes and practices towards solid waste management
by Babaei, Ali Akbar & Alavi, Nadali & Goudarzi, Gholamreza & Teymouri, Pari & Ahmadi, Kambiz & Rafiee, Mohammad
- 101-112 Waste effectiveness of the construction industry: Understanding the impediments and requisites for improvements
by Ajayi, Saheed O. & Oyedele, Lukumon O. & Bilal, Muhammad & Akinade, Olugbenga O. & Alaka, Hafiz A. & Owolabi, Hakeem A. & Kadiri, Kabir O.
- 113-127 Cumulative Overall Resource Efficiency Assessment (COREA) for comparing bio-based products with their fossil-derived counterparts
by Huysveld, Sophie & De Meester, Steven & Van linden, Veerle & Muylle, Hilde & Peiren, Nico & Lauwers, Ludwig & Dewulf, Jo
- 128-142 Exergy cost allocation of by-products in the mining and metallurgical industry
by Valero, Alicia & Domínguez, Adriana & Valero, Antonio
- 143-152 Integrating G2G, C2C and resource flow analysis into life cycle assessment framework: A case of construction steel’s resource loop
by Lanfang, Liu & Issam, Srour & Chong, Wai K. & Christopher, Hermreck
- 153-162 Community participation in household solid waste reduction in Surabaya, Indonesia
by Dhokhikah, Yeny & Trihadiningrum, Yulinah & Sunaryo, Sony
- 163-169 Sustainability assessment of dismantling strategies for end-of-life aircraft recycling
by Sabaghi, Mahdi & Cai, Yongliang & Mascle, Christian & Baptiste, Pierre
- 170-177 Barriers to electronics reuse of transboundary e-waste shipment regulations: An evaluation based on industry experiences
by Milovantseva, Natalia & Fitzpatrick, Colin
- 178-184 Environmental analysis of a domestic rainwater harvesting system: A case study in France
by Vialle, C. & Busset, G. & Tanfin, L. & Montrejaud-Vignoles, M. & Huau, M.-C. & Sablayrolles, C.
2015, Volume 101, Issue C
- 1-8 Comparative life cycle assessment of concrete road pavements using industrial by-products as alternative materials
by Anastasiou, E.K. & Liapis, A. & Papayianni, I.
- 9-19 A Business approach for transformation to sustainable construction: an implementation on a developing country
by Mousa, Ahmad
- 20-33 System dynamics models for decision making in product multiple lifecycles
by Asif, Farazee M.A. & Rashid, Amir & Bianchi, Carmine & Nicolescu, Cornel M.
- 34-41 Facilitating waste paper recycling and repurposing via cost modelling of machine failure, labour availability and waste quantity
by Cheung, Wai Ming & Pachisia, Vedant
- 42-52 Analysis of end-of-life treatments of commercial refrigerating appliances: Bridging product and waste policies
by Ardente, Fulvio & Calero Pastor, Maria & Mathieux, Fabrice & Talens Peiró, Laura
- 53-60 The recyclability benefit rate of closed-loop and open-loop systems: A case study on plastic recycling in Flanders
by Huysman, Sofie & Debaveye, Sam & Schaubroeck, Thomas & Meester, Steven De & Ardente, Fulvio & Mathieux, Fabrice & Dewulf, Jo
- 61-72 Environmental sustainability analysis of a protein-rich livestock feed ingredient in The Netherlands: Microalgae production versus soybean import
by Taelman, Sue Ellen & De Meester, Steven & Van Dijk, Wim & da Silva, Vamilson & Dewulf, Jo
- 73-83 Improving waste management in construction projects: An Australian study
by Udawatta, Nilupa & Zuo, Jian & Chiveralls, Keri & Zillante, George
- 84-95 To introduce recycling or not: A panel data analysis in Japan
by Usui, Takehiro & Kakamu, Kazuhiko & Chikasada, Mitsuko
- 96-104 Water system integration and optimization in a yeast enterprise
by Xu, Xinyi & Lv, Zhuming & Song, Yun & Bin, Lingling
- 105-121 Reusing concrete panels from buildings for building: Potential in Finnish 1970s mass housing
by Huuhka, S. & Kaasalainen, T. & Hakanen, J.H. & Lahdensivu, J.
- 122-131 NYC WasteMatch – An online facilitated materials exchange as a tool for pollution prevention
by Fortuna, Lorena M. & Diyamandoglu, Vasil
- 143-153 Agriculture biomass in India: Part 2. Post-harvest losses, cost and environmental impacts
by Cardoen, Dennis & Joshi, Piyush & Diels, Ludo & Sarma, Priyangshu M. & Pant, Deepak
- 154-166 Reusing wastewater to cope with water scarcity: Economic, social and environmental considerations for decision-making
by Garcia, X. & Pargament, D.
- 167-181 Recovery of consumer waste in India – A mass flow analysis for paper, plastic and glass and the contribution of households and the informal sector
by Nandy, Biplob & Sharma, Gaurav & Garg, Saryu & Kumari, Shweta & George, Tess & Sunanda, Yengkhom & Sinha, Bärbel
- 182-193 Empirical study on the environmental pressure versus economic growth in China during 1991–2012
by Zhang, Zilong & Chen, Xingpeng & Heck, Peter & Xue, Bing & Liu, Ye
- 194-202 Predicting household food waste reduction using an extended theory of planned behaviour
by Graham-Rowe, Ella & Jessop, Donna C. & Sparks, Paul
- 203-211 Analyzing consumer-related nitrogen flows: A case study on food and material use in Austria
by Pierer, Magdalena & Schröck, Andrea & Winiwarter, Wilfried
2015, Volume 100, Issue C
- 1-10 Evolving materials, attributes, and functionality in consumer electronics: Case study of laptop computers
by Kasulaitis, Barbara V. & Babbitt, Callie W. & Kahhat, Ramzy & Williams, Eric & Ryen, Erinn G.
- 11-20 Toward the efficient recycling of alloying elements from end of life vehicle steel scrap
by Ohno, Hajime & Matsubae, Kazuyo & Nakajima, Kenichi & Kondo, Yasushi & Nakamura, Shinichiro & Nagasaka, Tetsuya
- 21-30 Deconstruction of wood-framed houses: Material recovery and environmental impact
by Diyamandoglu, Vasil & Fortuna, Lorena M.
- 31-40 A comparison of energy use, water use and carbon footprint of cassava starch production in Thailand, Vietnam and Colombia
by Tran, Thierry & Da, Guillaume & Moreno-Santander, Martín Alonso & Vélez-Hernández, Gustavo Adolfo & Giraldo-Toro, Andrès & Piyachomkwan, Kuakoon & Sriroth, Klanarong & Dufour, Dominique
- 41-48 Updated CO2 emission from Mg production by Pidgeon process: Implications for automotive application life cycle
by Li, Huiquan & Zhang, Wenjuan & Li, Qiang & Chen, Bo
- 49-57 Material use for electricity generation with carbon dioxide capture and storage: Extending life cycle analysis indices for material accounting
by Singh, Bhawna & Bouman, Evert A. & Strømman, Anders H. & Hertwich, Edgar G.
- 58-69 Designing a multi-echelon reverse logistics operation and network: A case study of office paper in Beijing
by Zhou, Xiaoguang & Zhou, Yanhui
- 70-80 A field based methodology for estimating waste generation rates at various stages of construction projects
by Bakshan, Amal & Srour, Issam & Chehab, Ghassan & El-Fadel, Mutasem
- 81-87 Effect of the use of industrial excess heat in district heating on greenhouse gas emissions: A systems perspective
by Ivner, Jenny & Broberg Viklund, Sarah
2015, Volume 99, Issue C
- 1-6 Availability of crop by-products in Spain: New raw materials for natural thermal insulation
by Palumbo, M. & Avellaneda, J. & Lacasta, A.M.
- 7-18 Patterns in trash: Factors driving municipal recycling in Massachusetts
by Starr, Jared & Nicolson, Craig
- 19-28 Differences in waste generation, waste composition, and source separation across three waste districts in a New York suburb
by Aphale, Omkar & Thyberg, Krista L. & Tonjes, David J.
- 29-39 Key factors to explain recycling, car use and environmentally responsible purchase behaviors: A comparative perspective
by López-Mosquera, Natalia & Lera-López, Fernando & Sánchez, Mercedes
- 40-47 Appropriateness of environmental impact distribution methods to model blast furnace slag recycling in cement making
by Saade, Marcella Ruschi Mendes & Silva, Maristela Gomes da & Gomes, Vanessa
- 48-62 Multicriteria optimization of copper scrap management strategy
by Bonnin, Marie & Azzaro-Pantel, Catherine & Domenech, Serge & Villeneuve, Jacques
- 63-71 Incentives for waste cooking oil collection in South Korea: A contingent valuation approach
by Cho, Sangmin & Kim, Jihyo & Park, Hi-Chun & Heo, Eunnyeong
- 72-83 Integrating durability-based service-life predictions with environmental impact assessments of natural fiber–reinforced composite materials
by Miller, Sabbie A. & Srubar, Wil V. & Billington, Sarah L. & Lepech, Michael D.
- 84-99 Modelling metabolism based performance of an urban water system using WaterMet2
by Behzadian, Kourosh & Kapelan, Zoran
- 100-110 Life cycle assessment of biodegradable waste treatment systems for sub-Saharan African cities
by Komakech, A.J. & Sundberg, C. & Jönsson, H. & Vinnerås, B.
- 111-117 Contingent valuation method applied to waste management
by Ferreira, Sandra & Marques, Rui Cunha
2015, Volume 98, Issue C
- 1-8 The material flows of lead in the Czech Republic
by Bicanová, Kamila & Wittlingerová, Zdeňka & Dvořák, Jaroslav & Zimová, Magdaléna
- 9-18 Estimating the quantities of critical metals embedded in ICT and consumer equipment
by Chancerel, Perrine & Marwede, Max & Nissen, Nils F. & Lang, Klaus-Dieter
- 19-29 A two-stage interval-stochastic programming model for planning end-of-life vehicles allocation under uncertainty
by Simic, Vladimir
- 30-40 Comparative economic analysis of inter-crop based conservation bench terrace and conventional systems in a sub-humid climate of India
by Sharda, V.N. & Dogra, Pradeep & Sena, D.R.
- 41-54 Garbage: How population, landmass, and development interact with culture in the production of waste
by Brown, D. Paul
- 55-66 Production and trade analysis in the Iberian cork sector: Economic characterization of a forest industry
by Sierra-Pérez, Jorge & Boschmonart-Rives, Jesús & Gabarrell, Xavier
- 67-75 Characterization, quantification and management of household solid waste: A case study in China
by Gu, Binxian & Wang, Haikun & Chen, Zun & Jiang, Suqin & Zhu, Weimo & Liu, Miaomiao & Chen, Yangqing & Wu, Yi & He, Sheng & Cheng, Rong & Yang, Jie & Bi, Jun
- 76-84 Virtual water management and the water–energy nexus: A case study of three Mid-Atlantic states
by Wang, Young-Doo & Lee, Jae Seung & Agbemabiese, Lawrence & Zame, Kenneth & Kang, Sung-Goo
2015, Volume 97, Issue C
- 1-15 Assessing low quality water use policy framework: Case study from Ghana
by Amponsah, Owusu & Vigre, Håkan & Schou, Torben Wilde & Boateng, Ethel Seiwaa & Braimah, Imoro & Abaidoo, Robert Clement
- 16-23 Economic and environmental comparison between two scenarios of waste management: MBT vs thermal treatment
by Panepinto, D. & Blengini, G.A. & Genon, G.
- 24-30 Polymer recycling codes for distributed manufacturing with 3-D printers
by Hunt, Emily J. & Zhang, Chenlong & Anzalone, Nick & Pearce, Joshua M.
- 31-43 Differences in self reported recycling behavior of first and second generation South Asians in Ontario, Canada
by Lakhan, Calvin
- 44-54 Leveraging intellectual property rights to encourage green product design and remanufacturing for sustainable waste management
by Krystofik, Mark & Wagner, Jeffrey & Gaustad, Gabrielle
- 55-65 Optimisation of the economic, environmental and administrative efficiency of the municipal waste management model in rural areas
by Põldnurk, Jana
- 66-75 Metallurgical recycling processes: Sustainability ratios and environmental performance assessment
by Jamali-Zghal, N. & Lacarrière, B. & Le Corre, O.
- 76-92 A literature review and perspectives in reverse logistics
by Agrawal, Saurabh & Singh, Rajesh K. & Murtaza, Qasim
- 93-99 Resources of post-consumer wood waste originating from the construction sector in Poland
by Ratajczak, Ewa & Bidzińska, Gabriela & Szostak, Aleksandra & Herbeć, Magdalena
2015, Volume 96, Issue C
- 1-10 LCA based comparative study of a microbial oil production starch wastewater treatment plant and its improvements with the combination of CHP system in Shandong, China
by Vera, Luis & Sun, Wei & Iftikhar, Maria & Liu, Junteng
- 11-18 Modeling and assessment of e-waste take-back strategies in India
by Dwivedy, Maheshwar & Suchde, Pratik & Mittal, R.K.
- 19-30 Framework for the evaluation of anthropogenic resources: A landfill mining case study – Resource or reserve?
by Winterstetter, Andrea & Laner, David & Rechberger, Helmut & Fellner, Johann
- 31-39 Assessing the climate impact of district heating systems with combined heat and power production and industrial excess heat
by Olsson, Linda & Wetterlund, Elisabeth & Söderström, Mats
- 40-50 Emergy and greenhouse gas assessment of a sustainable, integrated agricultural model (SIAM) for plant, animal and biogas production: Analysis of the ecological recycle of wastes
by Wu, Xihui & Wu, Faqi & Tong, Xiaogang & Wu, Jia & Sun, Lu & Peng, Xiaoyu
- 51-60 Technical analysis of crop residue biomass energy in an agricultural region of Ghana
by Ayamga, Ezekiel Anabire & Kemausuor, Francis & Addo, Ahmad
- 61-70 A three-stage methodology for initiating an effective management system for electronic waste in Turkey
by Çetinsaya Özkır, Vildan & Efendigil, Tuğba & Demirel, Tufan & Çetin Demirel, Nihan & Deveci, Muhammet & Topçu, Burak
2015, Volume 95, Issue C
- 1-14 Environmental impact of recycling digested food waste as a fertilizer in agriculture—A case study
by Chiew, Yoon Lin & Spångberg, Johanna & Baky, Andras & Hansson, Per-Anders & Jönsson, Håkan
- 15-37 Novel bottom-up urban water demand forecasting model: Revealing the determinants, drivers and predictors of residential indoor end-use consumption
by Makki, Anas A. & Stewart, Rodney A. & Beal, Cara D. & Panuwatwanich, Kriengsak
- 38-45 Evaluating the effects of unit based waste disposal schemes on the collection of household recyclables in Ontario, Canada
by Lakhan, Calvin
- 46-57 Social impact assessment of informal recycling of electronic ICT waste in Pakistan using UNEP SETAC guidelines
by Umair, Shakila & Björklund, Anna & Petersen, Elisabeth Ekener
- 58-67 Extending the Theory of Planned Behavior in the context of recycling: The role of moral norms and of demographic predictors
by Botetzagias, Iosif & Dima, Andora-Fani & Malesios, Chrisovaladis
- 68-76 Toward a systematized framework for resource efficiency indicators
by Huysman, Sofie & Sala, Serenella & Mancini, Lucia & Ardente, Fulvio & Alvarenga, Rodrigo A.F. & De Meester, Steven & Mathieux, Fabrice & Dewulf, Jo
- 77-90 Enhancing organic waste separation at the source behavior: A case study of the application of motivation mechanisms in communities in Thailand
by Boonrod, K. & Towprayoon, S. & Bonnet, S. & Tripetchkul, S.
- 91-99 Why does the informal sector of end-of-life vehicle treatment thrive? A case study of China and lessons for developing countries in motorization process
by Hu, Shuhan & Wen, Zongguo
- 100-111 Biomass streams in Austria: Drawing a complete picture of biogenic material flows within the national economy
by Kalt, Gerald
- 112-119 Assessing land-use impacts by clean vehicle systems
by Pontau, Patricia & Hou, Yi & Cai, Hua & Zhen, Yi & Jia, Xiaoping & Chiu, Anthony S.F. & Xu, Ming
- 120-132 Reverse logistics system design for the waste of electrical and electronic equipment (WEEE) in Turkey
by Kilic, Huseyin Selcuk & Cebeci, Ufuk & Ayhan, Mustafa Batuhan
- 133-142 Diversion, but at what cost? The economic challenges of recycling in Ontario
by Lakhan, Calvin
- 143-155 Toward the implementation of new regional biowaste management plans: Environmental assessment of different waste management scenarios in Catalonia
by Colón, Joan & Cadena, Erasmo & Colazo, Ana Belen & Quirós, Roberto & Sánchez, Antoni & Font, Xavier & Artola, Adriana
- 156-173 Administrative and market-based allocation mechanism for regional water resources planning
by Tu, Yan & Zhou, Xiaoyang & Gang, Jun & Liechty, Merrill & Xu, Jiuping & Lev, Benjamin
- 174-182 Synthesis of 2-methyl tetrahydrofuran from various lignocellulosic feedstocks: Sustainability assessment via LCA
by Khoo, Hsien H. & Wong, Loretta L. & Tan, Jonathan & Isoni, Valerio & Sharratt, Paul
- 183-192 A study on material metabolism in Hebei iron and steel industry analysis
by Dai, Tiejun
- 193-201 The criticality of four nuclear energy metals
by Harper, E.M. & Diao, Zhouwei & Panousi, Stefania & Nuss, Philip & Eckelman, Matthew J. & Graedel, T.E.
2015, Volume 94, Issue C
- 1-10 Improving resource utilization efficiency in China's mineral resource-based cities: A case study of Chengde, Hebei province
by Yu, Chenjian & Li, Huiquan & Jia, Xiaoping & Li, Qiang
- 11-20 Carrying capacity assessment of forest resources: Enhancing environmental sustainability in energy production at local scale
by Martire, Salvatore & Castellani, Valentina & Sala, Serenella
- 21-34 Evaluation of rainwater harvesting in Portugal: Application to single-family residences
by Silva, Cristina Matos & Sousa, Vitor & Carvalho, Nuno Vaz
- 35-42 Identifying water recycling strategy using multivariate statistical analysis for high-tech industries in Taiwan
by Lin, Wen-Shyong & Lee, Mengshan & Huang, Yu-Cheng & Den, Walter
- 43-55 Waste management alternatives: (Dis)economies of scale in recovery and decoupling
by Swart, Julia & Groot, Loek
- 56-65 Carbon footprint of supermarket food waste
by Scholz, Katharina & Eriksson, Mattias & Strid, Ingrid
- 66-71 Application of air classification for improved recycling of sinter plant dust
by Lanzerstorfer, Christof
- 72-79 Compost from organic solid waste: Quality assessment and European regulations for its sustainable use
by Cesaro, A. & Belgiorno, V. & Guida, M.
- 80-91 Land-cover-based indicator to assess the accessibility of resources used in the construction sector
by Ioannidou, Dimitra & Nikias, Vasileios & Brière, Raphaël & Zerbi, Stefano & Habert, Guillaume
- 92-98 Evaluation of leaching of trace metals from concrete amended with cement kiln baghouse filter dust
by Hayes, Joshua B. & Wang, Jun & Roessler, Justin G. & Ferraro, Christopher C. & Wu, Chang-Yu & Deford, Dale & Townsend, Timothy G.
- 99-109 Physical input-output accounting of the wood and paper flow in Germany
by Bösch, Matthias & Jochem, Dominik & Weimar, Holger & Dieter, Matthias
- 110-117 Using thermodynamics to improve the resource efficiency indicator GDP/DMC
by Valero, Alicia & Valero, Antonio & Calvo, Guiomar
- 118-128 Statistical entropy analysis of substance flows in a lead smelting process
by Bai, Lu & Qiao, Qi & Li, Yanping & Wan, Si & Xie, Minghui & Chai, Fahe
- 129-135 Remote sensing monitoring recent rapid increase of coal mining activity of an important energy base in northern China, a case study of Mu Us Sandy Land
by Li, N. & Yan, C.Z. & Xie, J.L.
- 136-145 The effectiveness of water conservation measures on summer residential water use in Los Angeles, California
by Mini, C. & Hogue, T.S. & Pincetl, S.
- 146-156 A transport cost-based optimization for recycling of municipal sludge through application on arable lands
by Görgüner, Merve & Aksoy, Ayşegül & Sanin, F. Dilek
- 157-168 Combined MFA and LCA approach to evaluate the metabolism of service polygons: A case study on a university campus
by Lopes Silva, Diogo Aparecido & de Oliveira, José Augusto & Saavedra, Yovana M.B. & Ometto, Aldo Roberto & Rieradevall i Pons, Joan & Gabarrell Durany, Xavier
2014, Volume 93, Issue C
- 1-8 Metal scarcity and sustainability, analyzing the necessity to reduce the extraction of scarce metals
by Henckens, M.L.C.M. & Driessen, P.P.J. & Worrell, E.
- 9-22 The use of bio-waste to revegetate eroded land areas in Ylläs, Northern Finland: Toward a zero waste perspective of tourism in the Finnish Lapland
by Piippo, Sari & Juntunen, Arttu & Kurppa, Sirpa & Pongrácz, Eva
- 23-31 Use of recycled products in UK construction industry: An empirical investigation into critical impediments and strategies for improvement
by Oyedele, Lukumon O. & Ajayi, Saheed O. & Kadiri, Kabir O.
- 32-49 Phosphorus resources, their depletion and conservation, a review
by Reijnders, L.
- 50-58 Water saving effect on integrated water resource management
by Gao, Hongchao & Wei, Tong & Lou, Inchio & Yang, Zhifeng & Shen, Zhenyao & Li, Yingxia
- 59-66 Material flow analysis of lubricating oil use in California
by Kuczenski, Brandon & Geyer, Roland & Zink, Trevor & Henderson, Ashley
- 67-74 Assessing the accumulation of construction waste generation during residential building construction works
by Villoria Sáez, Paola & del Río Merino, Mercedes & Porras-Amores, César & San-Antonio González, Alicia
Printed from https://ideas.repec.org/s/eee/recore3.html
