IDEAS home Printed from https://ideas.repec.org/a/eee/recore/v100y2015icp11-20.html
   My bibliography  Save this article

Toward the efficient recycling of alloying elements from end of life vehicle steel scrap

Author

Listed:
  • Ohno, Hajime
  • Matsubae, Kazuyo
  • Nakajima, Kenichi
  • Kondo, Yasushi
  • Nakamura, Shinichiro
  • Nagasaka, Tetsuya

Abstract

There has been a sharp increase in the production of automobiles over the past decade. In 2010, one billion automobiles were in circulation worldwide. The automobile industry is one of the largest metals consumers and plays an important role in their sustainable use. Steel materials, including alloy steels that contain alloying elements (AEs) such as manganese, chromium, nickel, and molybdenum, are the main component of automobiles. The recycling of end-of-life vehicles (ELVs) significantly affects the cycling of iron, steel, and AEs. Currently, ELV recycling is performed using the electric arc furnace (EAF). In this method, losses of AEs are likely to occur because their presence is rarely considered. This study evaluated the environmental and economic benefits of alternative ELV recycling schemes, which allow more efficient utilization of AEs found in ELV-derived steel scrap (ELV-dSS). The AE contents in ELV-dSS (as car-parts) were estimated by means of a waste input–output material flow analysis (WIO-MFA) model extended for the detailed analysis of automobile composition. Using Japanese data, it was found that sorting ELV-dSS by parts can result in a significant recovery of AEs; more specifically, a 10-fold saving in AEs was achieved by sorting exhaust parts. The recoverable mass of AEs from sorted ELV-dSS was found to correspond to 8.2% of the annual consumption of AEs in Japan, as virgin resources in EAF steelmaking. ELV-dSS sorting was found to be significantly effective in the conservation of AE resources.

Suggested Citation

  • Ohno, Hajime & Matsubae, Kazuyo & Nakajima, Kenichi & Kondo, Yasushi & Nakamura, Shinichiro & Nagasaka, Tetsuya, 2015. "Toward the efficient recycling of alloying elements from end of life vehicle steel scrap," Resources, Conservation & Recycling, Elsevier, vol. 100(C), pages 11-20.
  • Handle: RePEc:eee:recore:v:100:y:2015:i:c:p:11-20
    DOI: 10.1016/j.resconrec.2015.04.001
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0921344915000695
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.resconrec.2015.04.001?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Yasushi Kondo & Shinichiro Nakamura, 2005. "Waste input-output linear programming model with its application to eco-efficiency analysis," Economic Systems Research, Taylor & Francis Journals, vol. 17(4), pages 393-408.
    2. Hajime Ohno & Kazuyo Matsubae & Kenichi Nakajima & Shinichiro Nakamura & Tetsuya Nagasaka, 2014. "Unintentional Flow of Alloying Elements in Steel during Recycling of End-of-Life Vehicles," Journal of Industrial Ecology, Yale University, vol. 18(2), pages 242-253, April.
    3. Millet, Dominique & Yvars, Pierre-Alain & Tonnelier, Pierre, 2012. "A method for identifying the worst recycling case: Application on a range of vehicles in the automotive sector," Resources, Conservation & Recycling, Elsevier, vol. 68(C), pages 1-13.
    4. Simic, Vladimir & Dimitrijevic, Branka, 2013. "Risk explicit interval linear programming model for long-term planning of vehicle recycling in the EU legislative context under uncertainty," Resources, Conservation & Recycling, Elsevier, vol. 73(C), pages 197-210.
    5. Hatayama, Hiroki & Daigo, Ichiro & Tahara, Kiyotaka, 2014. "Tracking effective measures for closed-loop recycling of automobile steel in China," Resources, Conservation & Recycling, Elsevier, vol. 87(C), pages 65-71.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ryosuke Yokoi & Jun Nakatani & Yuichi Moriguchi, 2018. "An Extended Model for Tracking Accumulation Pathways of Materials Using Input–Output Tables: Application to Copper Flows in Japan," Sustainability, MDPI, vol. 10(3), pages 1-16, March.
    2. Jan Streeck & Stefan Pauliuk & Hanspeter Wieland & Dominik Wiedenhofer, 2023. "A review of methods to trace material flows into final products in dynamic material flow analysis: From industry shipments in physical units to monetary input–output tables, Part 1," Journal of Industrial Ecology, Yale University, vol. 27(2), pages 436-456, April.
    3. Tsiliyannis, Christos Aristeides, 2015. "Sustainability by cyclic manufacturing: Assessment of resource preservation under uncertain growth and returns," Resources, Conservation & Recycling, Elsevier, vol. 103(C), pages 155-170.
    4. Xin Lu & Hajime Ohno & Osamu Takeda & Takahiro Miki & Yasushi Sasaki & Hongmin Zhu & Tetsuya Nagasaka, 2022. "Toward an efficient recycling system: Evaluating recyclability of end‐of‐life stainless steels by considering elements distribution during a remelting process," Journal of Industrial Ecology, Yale University, vol. 26(5), pages 1701-1713, October.
    5. Pauliuk, Stefan & Kondo, Yasushi & Nakamura, Shinichiro & Nakajima, Kenichi, 2017. "Regional distribution and losses of end-of-life steel throughout multiple product life cycles—Insights from the global multiregional MaTrace model," Resources, Conservation & Recycling, Elsevier, vol. 116(C), pages 84-93.
    6. Berzi, Lorenzo & Delogu, Massimo & Pierini, Marco & Romoli, Filippo, 2016. "Evaluation of the end-of-life performance of a hybrid scooter with the application of recyclability and recoverability assessment methods," Resources, Conservation & Recycling, Elsevier, vol. 108(C), pages 140-155.
    7. Divya Tiwari & Jill Miscandlon & Ashutosh Tiwari & Geraint W. Jewell, 2021. "A Review of Circular Economy Research for Electric Motors and the Role of Industry 4.0 Technologies," Sustainability, MDPI, vol. 13(17), pages 1-19, August.
    8. Edgar Battand Towa Kouokam & Vanessa Zeller & Wouter Achten, 2019. "Input-output models and waste management analysis: A critical review," ULB Institutional Repository 2013/359535, ULB -- Universite Libre de Bruxelles.
    9. Qingshi Tu & Edgar G. Hertwich, 2022. "A mechanistic model to link technical specifications of vehicle end‐of‐life treatment with the potential of closed‐loop recycling of post‐consumer scrap alloys," Journal of Industrial Ecology, Yale University, vol. 26(3), pages 704-717, June.
    10. Hao, Han & Qiao, Qinyu & Liu, Zongwei & Zhao, Fuquan, 2017. "Impact of recycling on energy consumption and greenhouse gas emissions from electric vehicle production: The China 2025 case," Resources, Conservation & Recycling, Elsevier, vol. 122(C), pages 114-125.
    11. Simic, Vladimir, 2016. "End-of-life vehicles allocation management under multiple uncertainties: An interval-parameter two-stage stochastic full-infinite programming approach," Resources, Conservation & Recycling, Elsevier, vol. 114(C), pages 1-17.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tsiliyannis, Christos Aristeides, 2015. "Sustainability by cyclic manufacturing: Assessment of resource preservation under uncertain growth and returns," Resources, Conservation & Recycling, Elsevier, vol. 103(C), pages 155-170.
    2. Edgar Battand Towa Kouokam & Vanessa Zeller & Wouter Achten, 2019. "Input-output models and waste management analysis: A critical review," ULB Institutional Repository 2013/359535, ULB -- Universite Libre de Bruxelles.
    3. Glenn A. Aguilar-Hernandez & Carlos Pablo Sigüenza-Sanchez & Franco Donati & João F. D. Rodrigues & Arnold Tukker, 2018. "Assessing circularity interventions: a review of EEIOA-based studies," Journal of Economic Structures, Springer;Pan-Pacific Association of Input-Output Studies (PAPAIOS), vol. 7(1), pages 1-24, December.
    4. Pauliuk, Stefan & Kondo, Yasushi & Nakamura, Shinichiro & Nakajima, Kenichi, 2017. "Regional distribution and losses of end-of-life steel throughout multiple product life cycles—Insights from the global multiregional MaTrace model," Resources, Conservation & Recycling, Elsevier, vol. 116(C), pages 84-93.
    5. Stanislav Shmelev & Harrison Roger Brook, 2021. "Macro Sustainability across Countries: Key Sector Environmentally Extended Input-Output Analysis," Sustainability, MDPI, vol. 13(21), pages 1-46, October.
    6. Abel Ortego & Alicia Valero & Antonio Valero & Eliette Restrepo, 2018. "Vehicles and Critical Raw Materials: A Sustainability Assessment Using Thermodynamic Rarity," Journal of Industrial Ecology, Yale University, vol. 22(5), pages 1005-1015, October.
    7. Alexandre Tisserant & Stefan Pauliuk, 2016. "Matching global cobalt demand under different scenarios for co-production and mining attractiveness," Journal of Economic Structures, Springer;Pan-Pacific Association of Input-Output Studies (PAPAIOS), vol. 5(1), pages 1-19, December.
    8. Alexandre Tisserant & Stefan Pauliuk, 2016. "Matching global cobalt demand under different scenarios for co-production and mining attractiveness," Journal of Economic Structures, Springer;Pan-Pacific Association of Input-Output Studies (PAPAIOS), vol. 5(1), pages 1-19, December.
    9. Berzi, Lorenzo & Delogu, Massimo & Pierini, Marco & Romoli, Filippo, 2016. "Evaluation of the end-of-life performance of a hybrid scooter with the application of recyclability and recoverability assessment methods," Resources, Conservation & Recycling, Elsevier, vol. 108(C), pages 140-155.
    10. Andersson, Magnus & Ljunggren Söderman, Maria & Sandén, Björn A., 2019. "Challenges of recycling multiple scarce metals: The case of Swedish ELV and WEEE recycling," Resources Policy, Elsevier, vol. 63(C), pages 1-1.
    11. Stanislav Edward Shmelev (ODID), "undated". "Environmentally Extended Input-Output Analysis of the UK Economy: Key Sector Analysis," QEH Working Papers qehwps183, Queen Elizabeth House, University of Oxford.
    12. Harvey, L.D. Danny, 2021. "Iron and steel recycling: Review, conceptual model, irreducible mining requirements, and energy implications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 138(C).
    13. Hajime Ohno & Kazuyo Matsubae & Kenichi Nakajima & Keisuke Nansai & Yasuhiro Fukushima & Tetsuya Nagasaka, 2016. "Consumption-based accounting of steel alloying elements and greenhouse gas emissions associated with the metal use: the case of Japan," Journal of Economic Structures, Springer;Pan-Pacific Association of Input-Output Studies (PAPAIOS), vol. 5(1), pages 1-17, December.
    14. Lin, Chen, 2009. "Hybrid input-output analysis of wastewater treatment and environmental impacts: A case study for the Tokyo Metropolis," Ecological Economics, Elsevier, vol. 68(7), pages 2096-2105, May.
    15. Stefan Pauliuk & Niko Heeren, 2020. "ODYM—An open software framework for studying dynamic material systems: Principles, implementation, and data structures," Journal of Industrial Ecology, Yale University, vol. 24(3), pages 446-458, June.
    16. Lopes Silva, Diogo Aparecido & de Oliveira, José Augusto & Saavedra, Yovana M.B. & Ometto, Aldo Roberto & Rieradevall i Pons, Joan & Gabarrell Durany, Xavier, 2015. "Combined MFA and LCA approach to evaluate the metabolism of service polygons: A case study on a university campus," Resources, Conservation & Recycling, Elsevier, vol. 94(C), pages 157-168.
    17. Vadenbo, Carl & Hellweg, Stefanie & Guillén-Gosálbez, Gonzalo, 2014. "Multi-objective optimization of waste and resource management in industrial networks – Part I: Model description," Resources, Conservation & Recycling, Elsevier, vol. 89(C), pages 52-63.
    18. Luca Ciacci & Cristina T. de Matos & Barbara K. Reck & Dominic Wittmer & Elena Bernardi & Fabrice Mathieux & Fabrizio Passarini, 2022. "Material system analysis: Characterization of flows, stocks, and performance indicators of manganese, nickel, and natural graphite in the EU, 2012–2016," Journal of Industrial Ecology, Yale University, vol. 26(4), pages 1247-1260, August.
    19. Christoph Helbig & Yasushi Kondo & Shinichiro Nakamura, 2022. "Simultaneously tracing the fate of seven metals at a global level with MaTrace‐multi," Journal of Industrial Ecology, Yale University, vol. 26(3), pages 923-936, June.
    20. Hasegawa Ryoji & Hirofumi Nakayama & Takayuki Shimoaka, 2017. "Analyzing material flow and value added associated with non-metallic mineral wastes in Japan," Journal of Economic Structures, Springer;Pan-Pacific Association of Input-Output Studies (PAPAIOS), vol. 6(1), pages 1-15, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:recore:v:100:y:2015:i:c:p:11-20. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Kai Meng (email available below). General contact details of provider: https://www.journals.elsevier.com/resources-conservation-and-recycling .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.