IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i11p2937-d368764.html
   My bibliography  Save this article

Pellet Production from Woody and Non-Woody Feedstocks: A Review on Biomass Quality Evaluation

Author

Listed:
  • Rodolfo Picchio

    (Department of Agricultural and Forest Sciences (DAFNE), Tuscia University, 01100 Viterbo, Italy)

  • Francesco Latterini

    (CREA Research Centre for Engineering and Agro-Food Processing, Via della Pascolare, 16, 00015 Monterotondo (Rome), Italy)

  • Rachele Venanzi

    (Department of Agricultural and Forest Sciences (DAFNE), Tuscia University, 01100 Viterbo, Italy)

  • Walter Stefanoni

    (CREA Research Centre for Engineering and Agro-Food Processing, Via della Pascolare, 16, 00015 Monterotondo (Rome), Italy)

  • Alessandro Suardi

    (CREA Research Centre for Engineering and Agro-Food Processing, Via della Pascolare, 16, 00015 Monterotondo (Rome), Italy)

  • Damiano Tocci

    (Department of Agricultural and Forest Sciences (DAFNE), Tuscia University, 01100 Viterbo, Italy)

  • Luigi Pari

    (CREA Research Centre for Engineering and Agro-Food Processing, Via della Pascolare, 16, 00015 Monterotondo (Rome), Italy)

Abstract

Forest and agricultural biomass are important sources of renewable and sustainable fuel for energy production. Their increasing consumption is mainly related to the increase in global energy demand and fossil fuel prices but also to the limited availability of petroleum and the lower environmental impact of these biomass compared with other non-renewable fuels. In particular, the pellet sector has seen important developments in terms of both production and the number of installed transformation plants. In addition, pellet production from non-woody biomass is increasing in importance. One of the fundamental aspects for the correct and sustainable use of a biofuel is evaluation of its quality. This is even more important when dealing with pellet production, considering the broad spectrum of possible raw materials for pelletizing. Considering the significant number of papers dealing with pellet quality evaluation and improvement in the last decade, this review aims to give the reader an overall view of the most current knowledge about this large and interesting topic. We focused on pellets of agricultural and forestry origin and analyzed papers regarding the specific topic of pellet quality evaluation and improvement from the last five years (2016–2020). In particular, the review findings are presented in the following order: the influence of different agro-forest management systems on pellet quality; analysis of pellets from pure feedstocks (no blending or binders); the influence of blending and binders on pellet quality; and the influence of pre and post treatments. Finally, a brief discussion about actual research lacks in this topic and the possibilities for future research are presented. It is important to underline that the present review is focused on the influence of the biomass characteristics on pellet quality. The effects of the process parameters (die temperature, applied pressure, holding time) on pellet features are not considered in this review, because that is another very large topic deserving a dedicated paper.

Suggested Citation

  • Rodolfo Picchio & Francesco Latterini & Rachele Venanzi & Walter Stefanoni & Alessandro Suardi & Damiano Tocci & Luigi Pari, 2020. "Pellet Production from Woody and Non-Woody Feedstocks: A Review on Biomass Quality Evaluation," Energies, MDPI, vol. 13(11), pages 1-20, June.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:11:p:2937-:d:368764
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/11/2937/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/11/2937/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Liu, Zhijia & Mi, Bingbing & Jiang, Zehui & Fei, Benhua & Cai, Zhiyong & Liu, Xing'e, 2016. "Improved bulk density of bamboo pellets as biomass for energy production," Renewable Energy, Elsevier, vol. 86(C), pages 1-7.
    2. Magdalena Dołżyńska & Sławomir Obidziński & Małgorzata Kowczyk-Sadowy & Małgorzata Krasowska, 2019. "Densification and Combustion of Cherry Stones," Energies, MDPI, vol. 12(16), pages 1-15, August.
    3. Mobini, Mahdi & Sowlati, Taraneh & Sokhansanj, Shahab, 2013. "A simulation model for the design and analysis of wood pellet supply chains," Applied Energy, Elsevier, vol. 111(C), pages 1239-1249.
    4. Obidziński, Sławomir & Piekut, Jolanta & Dec, Dorota, 2016. "The influence of potato pulp content on the properties of pellets from buckwheat hulls," Renewable Energy, Elsevier, vol. 87(P1), pages 289-297.
    5. Ahn, Byoung Jun & Chang, Hee-sun & Lee, Soo Min & Choi, Don Ha & Cho, Seong Taek & Han, Gyu-seong & Yang, In, 2014. "Effect of binders on the durability of wood pellets fabricated from Larix kaemferi C. and Liriodendron tulipifera L. sawdust," Renewable Energy, Elsevier, vol. 62(C), pages 18-23.
    6. Mostafa, Mohamed E. & Hu, Song & Wang, Yi & Su, Sheng & Hu, Xun & Elsayed, Saad A. & Xiang, Jun, 2019. "The significance of pelletization operating conditions: An analysis of physical and mechanical characteristics as well as energy consumption of biomass pellets," Renewable and Sustainable Energy Reviews, Elsevier, vol. 105(C), pages 332-348.
    7. Johanna Gaitán-Alvarez & Roger Moya & Allen Puente-Urbina & Ana Rodriguez-Zuñiga, 2017. "Physical and Compression Properties of Pellets Manufactured with the Biomass of Five Woody Tropical Species of Costa Rica Torrefied at Different Temperatures and Times," Energies, MDPI, vol. 10(8), pages 1-17, August.
    8. Ríos-Badrán, Inés M. & Luzardo-Ocampo, Iván & García-Trejo, Juan Fernando & Santos-Cruz, José & Gutiérrez-Antonio, Claudia, 2020. "Production and characterization of fuel pellets from rice husk and wheat straw," Renewable Energy, Elsevier, vol. 145(C), pages 500-507.
    9. Rodolfo Picchio & Raffaello Spina & Alessandro Sirna & Angela Lo Monaco & Vincenzo Civitarese & Angelo Del Giudice & Alessandro Suardi & Luigi Pari, 2012. "Characterization of Woodchips for Energy from Forestry and Agroforestry Production," Energies, MDPI, vol. 5(10), pages 1-14, September.
    10. Anna Brunerová & Miroslav Müller & Vladimír Šleger & Himsar Ambarita & Petr Valášek, 2018. "Bio-Pellet Fuel from Oil Palm Empty Fruit Bunches (EFB): Using European Standards for Quality Testing," Sustainability, MDPI, vol. 10(12), pages 1-19, November.
    11. Song, Xiaoxu & Yang, Yang & Zhang, Meng & Zhang, Ke & Wang, Donghai, 2018. "Ultrasonic pelleting of torrefied lignocellulosic biomass for bioenergy production," Renewable Energy, Elsevier, vol. 129(PA), pages 56-62.
    12. Yun, Huimin & Clift, Roland & Bi, Xiaotao, 2020. "Process simulation, techno-economic evaluation and market analysis of supply chains for torrefied wood pellets from British Columbia: Impacts of plant configuration and distance to market," Renewable and Sustainable Energy Reviews, Elsevier, vol. 127(C).
    13. Peter Križan & Miloš Matú & Ľubomír Šooš & Juraj Beniak, 2015. "Behavior of Beech Sawdust during Densification into a Solid Biofuel," Energies, MDPI, vol. 8(7), pages 1-17, June.
    14. García-Maraver, A. & Popov, V. & Zamorano, M., 2011. "A review of European standards for pellet quality," Renewable Energy, Elsevier, vol. 36(12), pages 3537-3540.
    15. Fernández-Puratich, H. & Hernández, D. & Lerma Arce, V., 2017. "Characterization and cost savings of pellets fabricated from Zea mays waste from corn mills combined with Pinus radiata," Renewable Energy, Elsevier, vol. 114(PB), pages 448-454.
    16. Giuseppe Toscano & Vincenzo Alfano & Antonio Scarfone & Luigi Pari, 2018. "Pelleting Vineyard Pruning at Low Cost with a Mobile Technology," Energies, MDPI, vol. 11(9), pages 1-17, September.
    17. García, R. & González-Vázquez, M.P. & Martín, A.J. & Pevida, C. & Rubiera, F., 2020. "Pelletization of torrefied biomass with solid and liquid bio-additives," Renewable Energy, Elsevier, vol. 151(C), pages 175-183.
    18. Zhou, Yuguang & Zhang, Zongxi & Zhang, Yixiang & Wang, Yungang & Yu, Yang & Ji, Fang & Ahmad, Riaz & Dong, Renjie, 2016. "A comprehensive review on densified solid biofuel industry in China," Renewable and Sustainable Energy Reviews, Elsevier, vol. 54(C), pages 1412-1428.
    19. Nunes, L.J.R. & Matias, J.C.O. & Catalão, J.P.S., 2014. "Mixed biomass pellets for thermal energy production: A review of combustion models," Applied Energy, Elsevier, vol. 127(C), pages 135-140.
    20. Alessandro Suardi & Francesco Latterini & Vincenzo Alfano & Nadia Palmieri & Simone Bergonzoli & Emmanouil Karampinis & Michael Alexandros Kougioumtzis & Panagiotis Grammelis & Luigi Pari, 2020. "Machine Performance and Hog Fuel Quality Evaluation in Olive Tree Pruning Harvesting Conducted Using a Towed Shredder on Flat and Hilly Fields," Energies, MDPI, vol. 13(7), pages 1-16, April.
    21. Li, Hui & Liu, Xinhua & Legros, Robert & Bi, Xiaotao T. & Jim Lim, C. & Sokhansanj, Shahab, 2012. "Pelletization of torrefied sawdust and properties of torrefied pellets," Applied Energy, Elsevier, vol. 93(C), pages 680-685.
    22. Noorfidza Yub Harun & Ashak Mahmud Parvez & Muhammad T. Afzal, 2018. "Process and Energy Analysis of Pelleting Agricultural and Woody Biomass Blends," Sustainability, MDPI, vol. 10(6), pages 1-9, May.
    23. Rentizelas, Athanasios A. & Tolis, Athanasios J. & Tatsiopoulos, Ilias P., 2009. "Logistics issues of biomass: The storage problem and the multi-biomass supply chain," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(4), pages 887-894, May.
    24. Vincenzo Civitarese & Andrea Acampora & Giulio Sperandio & Alberto Assirelli & Rodolfo Picchio, 2019. "Production of Wood Pellets from Poplar Trees Managed as Coppices with Different Harvesting Cycles," Energies, MDPI, vol. 12(15), pages 1-16, August.
    25. Xuyang Cui & Junhong Yang & Xinyu Shi & Wanning Lei & Tao Huang & Chao Bai, 2019. "Experimental Investigation on the Energy Consumption, Physical, and Thermal Properties of a Novel Pellet Fuel Made from Wood Residues with Microalgae as a Binder," Energies, MDPI, vol. 12(18), pages 1-26, September.
    26. Esperanza Monedero & Henar Portero & Magín Lapuerta, 2018. "Combustion of Poplar and Pine Pellet Blends in a 50 kW Domestic Boiler: Emissions and Combustion Efficiency," Energies, MDPI, vol. 11(6), pages 1-17, June.
    27. Peng, Jianghong & Bi, Xiaotao T. & Lim, C. Jim & Peng, Hanchao & Kim, Chang Soo & Jia, Dening & Zuo, Haibin, 2015. "Sawdust as an effective binder for making torrefied pellets," Applied Energy, Elsevier, vol. 157(C), pages 491-498.
    28. Brand, Martha Andreia & Jacinto, Rodolfo Cardoso, 2020. "Apple pruning residues: Potential for burning in boiler systems and pellet production," Renewable Energy, Elsevier, vol. 152(C), pages 458-466.
    29. Marrugo, Gloria & Valdés, Carlos F. & Gómez, Carlos & Chejne, Farid, 2019. "Pelletizing of Colombian agro-industrial biomasses with crude glycerol," Renewable Energy, Elsevier, vol. 134(C), pages 558-568.
    30. Sławomir Obidziński & Magdalena Dołżyńska & Małgorzata Kowczyk-Sadowy & Krzysztof Jadwisieńczak & Paweł Sobczak, 2019. "Densification and Fuel Properties of Onion Husks," Energies, MDPI, vol. 12(24), pages 1-18, December.
    31. Rabaçal, M. & Fernandes, U. & Costa, M., 2013. "Combustion and emission characteristics of a domestic boiler fired with pellets of pine, industrial wood wastes and peach stones," Renewable Energy, Elsevier, vol. 51(C), pages 220-226.
    32. Barbanera, M. & Lascaro, E. & Stanzione, V. & Esposito, A. & Altieri, R. & Bufacchi, M., 2016. "Characterization of pellets from mixing olive pomace and olive tree pruning," Renewable Energy, Elsevier, vol. 88(C), pages 185-191.
    33. Zawiślak, Kazimierz & Sobczak, Paweł & Kraszkiewicz, Artur & Niedziółka, Ignacy & Parafiniuk, Stanisław & Kuna-Broniowska, Izabela & Tanaś, Wojciech & Żukiewicz-Sobczak, Wioletta & Obidziński, Sławomi, 2020. "The use of lignocellulosic waste in the production of pellets for energy purposes," Renewable Energy, Elsevier, vol. 145(C), pages 997-1003.
    34. Alessandro Suardi & Francesco Latterini & Vincenzo Alfano & Nadia Palmieri & Simone Bergonzoli & Luigi Pari, 2020. "Analysis of the Work Productivity and Costs of a Stationary Chipper Applied to the Harvesting of Olive Tree Pruning for Bio-Energy Production," Energies, MDPI, vol. 13(6), pages 1-12, March.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Nikola Čajová Kantová & Michal Holubčík & Alexander Čaja & Juraj Trnka & Jozef Jandačka, 2022. "Analyses of Pellets Produced from Spruce Sawdust, Spruce Bark, and Pine Cones in Different Proportions," Energies, MDPI, vol. 15(8), pages 1-9, April.
    2. Ewelina Olba-Zięty & Mariusz Jerzy Stolarski & Michał Krzyżaniak & Kazimierz Warmiński, 2020. "Willow Cultivation as Feedstock for Bioenergy-External Production Cost," Energies, MDPI, vol. 13(18), pages 1-17, September.
    3. Yılmaz, Hasan & Çanakcı, Murad & Topakcı, Mehmet & Karayel, Davut & Yiğit, Mete & Ortaçeşme, Derya, 2023. "In-situ pelletization of campus biomass residues: Case study for Akdeniz University," Renewable Energy, Elsevier, vol. 212(C), pages 972-983.
    4. Arkadiusz Dyjakon & Tomasz Noszczyk & Agata Mostek, 2021. "Mechanical Durability and Grindability of Pellets after Torrefaction Process," Energies, MDPI, vol. 14(20), pages 1-16, October.
    5. Onu Onu Olughu & Lope G. Tabil & Tim Dumonceaux & Edmund Mupondwa & Duncan Cree, 2021. "Comparative Study on Quality of Fuel Pellets from Switchgrass Treated with Different White-Rot Fungi," Energies, MDPI, vol. 14(22), pages 1-19, November.
    6. Paweł Stachowicz & Mariusz Jerzy Stolarski, 2022. "Thermophysical Properties and Elemental Composition of Black Locust, Poplar and Willow Biomass," Energies, MDPI, vol. 16(1), pages 1-16, December.
    7. Walter Stefanoni & Francesco Latterini & Javier Prieto Ruiz & Simone Bergonzoli & Consuelo Attolico & Luigi Pari, 2020. "Mechanical Harvesting of Camelina: Work Productivity, Costs and Seed Loss Evaluation," Energies, MDPI, vol. 13(20), pages 1-14, October.
    8. Tomasz Dudek, 2020. "The Impacts of the Energy Potential of Forest Biomass on the Local Market: An Example of South-Eastern Poland," Energies, MDPI, vol. 13(18), pages 1-11, September.
    9. Andrea Colantoni & Rodolfo Picchio & Alvaro Marucci & Elena Di Mattia & Valerio Cristofori & Fabio Recanatesi & Mauro Villarini & Danilo Monarca & Massimo Cecchini, 2020. "WP3—Innovation in Agriculture and Forestry Sector for Energetic Sustainability," Energies, MDPI, vol. 13(22), pages 1-7, November.
    10. Stachowicz, Paweł & Stolarski, Mariusz J., 2024. "Pellets from mixtures of short rotation coppice with forest-derived biomass: Production costs and energy intensity," Renewable Energy, Elsevier, vol. 225(C).
    11. Marek Wieruszewski & Aleksandra Górna & Katarzyna Mydlarz & Krzysztof Adamowicz, 2022. "Wood Biomass Resources in Poland Depending on Forest Structure and Industrial Processing of Wood Raw Material," Energies, MDPI, vol. 15(13), pages 1-17, July.
    12. Menelio Bardales & Catherine Bukowski & Valentín Molina-Moreno & Francisco Jesús Gálvez-Sánchez & Ángel Fermín Ramos-Ridao, 2022. "A Tool for the Assessment of Forest Biomass as a Source of Rural Sustainable Energy in Natural Areas in Honduras," Sustainability, MDPI, vol. 14(18), pages 1-15, September.
    13. Stefan Frodeson & Anthony Ike Anukam & Jonas Berghel & Magnus Ståhl & Rasika Lasanthi Kudahettige Nilsson & Gunnar Henriksson & Elizabeth Bosede Aladejana, 2021. "Densification of Wood—Influence on Mechanical and Chemical Properties when 11 Naturally Occurring Substances in Wood Are Mixed with Beech and Pine," Energies, MDPI, vol. 14(18), pages 1-16, September.
    14. Stolarski, Mariusz J. & Krzyżaniak, Michał & Olba-Zięty, Ewelina, 2024. "Energy efficiency of Silphium perfoliatum and Helianthus salicifolius biomass production," Energy, Elsevier, vol. 307(C).
    15. Wentao Li & Mingfeng Wang & Fanbin Meng & Yifei Zhang & Bo Zhang, 2022. "A Review on the Effects of Pretreatment and Process Parameters on Properties of Pellets," Energies, MDPI, vol. 15(19), pages 1-23, October.
    16. Pegoretti Leite de Souza, Hector Jesus & Muñoz, Fernando & Mendonça, Regis Teixeira & Sáez, Katia & Olave, Rodrigo & Segura, Cristina & de Souza, Daniel P.L. & de Paula Protásio, Thiago & Rodríguez-So, 2021. "Influence of lignin distribution, physicochemical characteristics and microstructure on the quality of biofuel pellets made from four different types of biomass," Renewable Energy, Elsevier, vol. 163(C), pages 1802-1816.
    17. Krzysztof Mudryk & Marcin Jewiarz & Marek Wróbel & Marcin Niemiec & Arkadiusz Dyjakon, 2021. "Evaluation of Urban Tree Leaf Biomass-Potential, Physico-Mechanical and Chemical Parameters of Raw Material and Solid Biofuel," Energies, MDPI, vol. 14(4), pages 1-14, February.
    18. Stolarski, Mariusz J. & Stachowicz, Paweł & Dudziec, Paweł, 2022. "Wood pellet quality depending on dendromass species," Renewable Energy, Elsevier, vol. 199(C), pages 498-508.
    19. Rita Petlickaitė & Algirdas Jasinskas & Ramūnas Mieldažys & Kęstutis Romaneckas & Marius Praspaliauskas & Jovita Balandaitė, 2022. "Investigation of Pressed Solid Biofuel Produced from Multi-Crop Biomass," Sustainability, MDPI, vol. 14(2), pages 1-16, January.
    20. Magdalena Dołżyńska & Sławomir Obidziński & Jolanta Piekut & Güray Yildiz, 2020. "The Utilization of Plum Stones for Pellet Production and Investigation of Post-Combustion Flue Gas Emissions," Energies, MDPI, vol. 13(19), pages 1-19, October.
    21. Jakub Stolarski & Sławomir Wierzbicki & Szymon Nitkiewicz & Mariusz Jerzy Stolarski, 2023. "Wood Chip Production Efficiency Depending on Chipper Type," Energies, MDPI, vol. 16(13), pages 1-15, June.
    22. Prestipino, Mauro & Salmeri, Fabio & Cucinotta, Filippo & Galvagno, Antonio, 2021. "Thermodynamic and environmental sustainability analysis of electricity production from an integrated cogeneration system based on residual biomass: A life cycle approach," Applied Energy, Elsevier, vol. 295(C).
    23. Rodolfo Picchio & Rachele Venanzi & Nicolò Di Marzio & Damiano Tocci & Farzam Tavankar, 2020. "A Comparative Analysis of Two Cable Yarder Technologies Performing Thinning Operations on a 33 Year Old Pine Plantation: A Potential Source of Wood for Energy," Energies, MDPI, vol. 13(20), pages 1-20, October.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mostafa, Mohamed E. & Hu, Song & Wang, Yi & Su, Sheng & Hu, Xun & Elsayed, Saad A. & Xiang, Jun, 2019. "The significance of pelletization operating conditions: An analysis of physical and mechanical characteristics as well as energy consumption of biomass pellets," Renewable and Sustainable Energy Reviews, Elsevier, vol. 105(C), pages 332-348.
    2. Stolarski, Mariusz J. & Stachowicz, Paweł & Dudziec, Paweł, 2022. "Wood pellet quality depending on dendromass species," Renewable Energy, Elsevier, vol. 199(C), pages 498-508.
    3. Sui, Haiqing & Chen, Jianfeng & Cheng, Wei & Zhu, Youjian & Zhang, Wennan & Hu, Junhao & Jiang, Hao & Shao, Jing'ai & Chen, Hanping, 2024. "Effect of oxidative torrefaction on fuel and pelletizing properties of agricultural biomass in comparison with non-oxidative torrefaction," Renewable Energy, Elsevier, vol. 226(C).
    4. Marcin Jewiarz & Marek Wróbel & Krzysztof Mudryk & Szymon Szufa, 2020. "Impact of the Drying Temperature and Grinding Technique on Biomass Grindability," Energies, MDPI, vol. 13(13), pages 1-22, July.
    5. Sławomir Obidziński & Magdalena Joka Yildiz & Sebastian Dąbrowski & Jan Jasiński & Wojciech Czekała, 2022. "Application of Post-Flotation Dairy Sludge in the Production of Wood Pellets: Pelletization and Combustion Analysis," Energies, MDPI, vol. 15(24), pages 1-19, December.
    6. de Souza, Hector Jesus Pegoretti Leite & Arantes, Marina Donária Chaves & Vidaurre, Graziela Baptista & Andrade, Carlos Rogério & Carneiro, Angélica de Cássia Oliveira & de Souza, Daniel Pegoretti Lei, 2020. "Pelletization of eucalyptus wood and coffee growing wastes: Strategies for biomass valorization and sustainable bioenergy production," Renewable Energy, Elsevier, vol. 149(C), pages 128-140.
    7. Xuyang Cui & Junhong Yang & Xinyu Shi & Wanning Lei & Tao Huang & Chao Bai, 2019. "Experimental Investigation on the Energy Consumption, Physical, and Thermal Properties of a Novel Pellet Fuel Made from Wood Residues with Microalgae as a Binder," Energies, MDPI, vol. 12(18), pages 1-26, September.
    8. Grzegorz Maj & Paweł Krzaczek & Wojciech Gołębiowski & Tomasz Słowik & Joanna Szyszlak-Bargłowicz & Grzegorz Zając, 2022. "Energy Consumption and Quality of Pellets Made of Waste from Corn Grain Drying Process," Sustainability, MDPI, vol. 14(13), pages 1-15, July.
    9. Wentao Li & Mingfeng Wang & Fanbin Meng & Yifei Zhang & Bo Zhang, 2022. "A Review on the Effects of Pretreatment and Process Parameters on Properties of Pellets," Energies, MDPI, vol. 15(19), pages 1-23, October.
    10. Magdalena Dołżyńska & Sławomir Obidziński & Jolanta Piekut & Güray Yildiz, 2020. "The Utilization of Plum Stones for Pellet Production and Investigation of Post-Combustion Flue Gas Emissions," Energies, MDPI, vol. 13(19), pages 1-19, October.
    11. Andrea Acampora & Vincenzo Civitarese & Giulio Sperandio & Negar Rezaei, 2021. "Qualitative Characterization of the Pellet Obtained from Hazelnut and Olive Tree Pruning," Energies, MDPI, vol. 14(14), pages 1-15, July.
    12. da Silva, Sandra Bezerra & Arantes, Marina Donária Chaves & de Andrade, Jaily Kerller Batista & Andrade, Carlos Rogério & Carneiro, Angélica de Cássia Oliveira & Protásio, Thiago de Paula, 2020. "Influence of physical and chemical compositions on the properties and energy use of lignocellulosic biomass pellets in Brazil," Renewable Energy, Elsevier, vol. 147(P1), pages 1870-1879.
    13. Lacrimioara Senila & Ioan Tenu & Petru Carlescu & Oana Raluca Corduneanu & Emanuel Petru Dumitrachi & Eniko Kovacs & Daniela Alexandra Scurtu & Oana Cadar & Anca Becze & Marin Senila & Marius Roman & , 2020. "Sustainable Biomass Pellets Production Using Vineyard Wastes," Agriculture, MDPI, vol. 10(11), pages 1-21, October.
    14. Sławomir Obidziński & Magdalena Dołżyńska & Małgorzata Kowczyk-Sadowy & Krzysztof Jadwisieńczak & Paweł Sobczak, 2019. "Densification and Fuel Properties of Onion Husks," Energies, MDPI, vol. 12(24), pages 1-18, December.
    15. Stachowicz, Paweł & Stolarski, Mariusz J., 2024. "Pellets from mixtures of short rotation coppice with forest-derived biomass: Production costs and energy intensity," Renewable Energy, Elsevier, vol. 225(C).
    16. Jakub Styks & Marek Wróbel & Jarosław Frączek & Adrian Knapczyk, 2020. "Effect of Compaction Pressure and Moisture Content on Quality Parameters of Perennial Biomass Pellets," Energies, MDPI, vol. 13(8), pages 1-20, April.
    17. Andrzej Greinert & Maria Mrówczyńska & Radosław Grech & Wojciech Szefner, 2020. "The Use of Plant Biomass Pellets for Energy Production by Combustion in Dedicated Furnaces," Energies, MDPI, vol. 13(2), pages 1-17, January.
    18. Yun, Huimin & Clift, Roland & Bi, Xiaotao, 2020. "Process simulation, techno-economic evaluation and market analysis of supply chains for torrefied wood pellets from British Columbia: Impacts of plant configuration and distance to market," Renewable and Sustainable Energy Reviews, Elsevier, vol. 127(C).
    19. Riva, Lorenzo & Nielsen, Henrik Kofoed & Skreiberg, Øyvind & Wang, Liang & Bartocci, Pietro & Barbanera, Marco & Bidini, Gianni & Fantozzi, Francesco, 2019. "Analysis of optimal temperature, pressure and binder quantity for the production of biocarbon pellet to be used as a substitute for coke," Applied Energy, Elsevier, vol. 256(C).
    20. Sławomir Obidziński & Michał Puchlik & Magdalena Dołżyńska, 2020. "Pelletization of Post-Harvest Tobacco Waste and Investigation of Flue Gas Emissions from Pellet Combustion," Energies, MDPI, vol. 13(22), pages 1-17, November.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:11:p:2937-:d:368764. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.