IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i13p3392-d379281.html
   My bibliography  Save this article

Impact of the Drying Temperature and Grinding Technique on Biomass Grindability

Author

Listed:
  • Marcin Jewiarz

    (Department of Mechanical Engineering and Agrophysics, University of Agriculture in Krakow, 30-149 Kraków, Poland)

  • Marek Wróbel

    (Department of Mechanical Engineering and Agrophysics, University of Agriculture in Krakow, 30-149 Kraków, Poland)

  • Krzysztof Mudryk

    (Department of Mechanical Engineering and Agrophysics, University of Agriculture in Krakow, 30-149 Kraków, Poland)

  • Szymon Szufa

    (Department of Environmental Engineering, Lodz University of Technology, 90-924 Lodz, Poland)

Abstract

The process of biomass compaction depends on many factors, related to material and process. One of the most important is the proper fragmentation of the raw material. In most cases, more fragmented raw material makes it easier to achieve the desired quality parameters of pellets or briquettes. While the chipping of biomass prefers moist materials, for grinding, the material needs to be dried. As drying temperature changes the properties of the material, these may affect the grinding process. The aim of this work was to determine the influence of the drying temperature of biomass raw material in the range of 60–140 °C on the biomass grindability. To only determine this effect, without the influence of moisture, grinding was carried out on the material in a dry state. The research was carried out on a mill with a knife and hammer grinding system, which is the most popular in the fragmentation of biomass. The analysis of particle size distribution and bulk density of the obtained material was carried out. The energy demand for the grinding process was determined and it was shown that drying temperature, grinding system, and mainly type of biomass affects the grindability.

Suggested Citation

  • Marcin Jewiarz & Marek Wróbel & Krzysztof Mudryk & Szymon Szufa, 2020. "Impact of the Drying Temperature and Grinding Technique on Biomass Grindability," Energies, MDPI, vol. 13(13), pages 1-22, July.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:13:p:3392-:d:379281
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/13/3392/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/13/3392/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Magdalena Dołżyńska & Sławomir Obidziński & Małgorzata Kowczyk-Sadowy & Małgorzata Krasowska, 2019. "Densification and Combustion of Cherry Stones," Energies, MDPI, vol. 12(16), pages 1-15, August.
    2. Weronika Kruszelnicka & Robert Kasner & Patrycja Bałdowska-Witos & Józef Flizikowski & Andrzej Tomporowski, 2020. "The Integrated Energy Consumption Index for Energy Biomass Grinding Technology Assessment," Energies, MDPI, vol. 13(6), pages 1-26, March.
    3. Marek Wróbel & Marcin Jewiarz & Krzysztof Mudryk & Adrian Knapczyk, 2020. "Influence of Raw Material Drying Temperature on the Scots Pine ( Pinus sylvestris L.) Biomass Agglomeration Process—A Preliminary Study," Energies, MDPI, vol. 13(7), pages 1-17, April.
    4. Szymon Szufa & Grzegorz Wielgosiński & Piotr Piersa & Justyna Czerwińska & Maria Dzikuć & Łukasz Adrian & Wiktoria Lewandowska & Marta Marczak, 2020. "Torrefaction of Straw from Oats and Maize for Use as a Fuel and Additive to Organic Fertilizers—TGA Analysis, Kinetics as Products for Agricultural Purposes," Energies, MDPI, vol. 13(8), pages 1-30, April.
    5. Mohammad I. Jahirul & Mohammad G. Rasul & Ashfaque Ahmed Chowdhury & Nanjappa Ashwath, 2012. "Biofuels Production through Biomass Pyrolysis —A Technological Review," Energies, MDPI, vol. 5(12), pages 1-50, November.
    6. Marcin Jewiarz & Krzysztof Mudryk & Marek Wróbel & Jarosław Frączek & Krzysztof Dziedzic, 2020. "Parameters Affecting RDF-Based Pellet Quality," Energies, MDPI, vol. 13(4), pages 1-17, February.
    7. Peter Križan & Miloš Matú & Ľubomír Šooš & Juraj Beniak, 2015. "Behavior of Beech Sawdust during Densification into a Solid Biofuel," Energies, MDPI, vol. 8(7), pages 1-17, June.
    8. Tymoszuk, Mateusz & Mroczek, Kazimierz & Kalisz, Sylwester & Kubiczek, Henryk, 2019. "An investigation of biomass grindability," Energy, Elsevier, vol. 183(C), pages 116-126.
    9. Gebreegziabher, Tesfaldet & Oyedun, Adetoyese Olajire & Hui, Chi Wai, 2013. "Optimum biomass drying for combustion – A modeling approach," Energy, Elsevier, vol. 53(C), pages 67-73.
    10. Cassie Marie Welker & Vimal Kumar Balasubramanian & Carloalberto Petti & Krishan Mohan Rai & Seth DeBolt & Venugopal Mendu, 2015. "Engineering Plant Biomass Lignin Content and Composition for Biofuels and Bioproducts," Energies, MDPI, vol. 8(8), pages 1-23, July.
    11. Jakub Styks & Marek Wróbel & Jarosław Frączek & Adrian Knapczyk, 2020. "Effect of Compaction Pressure and Moisture Content on Quality Parameters of Perennial Biomass Pellets," Energies, MDPI, vol. 13(8), pages 1-20, April.
    12. Sunday Yusuf Kpalo & Mohamad Faiz Zainuddin & Latifah Abd Manaf & Ahmad Muhaimin Roslan, 2020. "A Review of Technical and Economic Aspects of Biomass Briquetting," Sustainability, MDPI, vol. 12(11), pages 1-30, June.
    13. Li, Hui & Liu, Xinhua & Legros, Robert & Bi, Xiaotao T. & Jim Lim, C. & Sokhansanj, Shahab, 2012. "Pelletization of torrefied sawdust and properties of torrefied pellets," Applied Energy, Elsevier, vol. 93(C), pages 680-685.
    14. Sławomir Francik & Adrian Knapczyk & Artur Knapczyk & Renata Francik, 2020. "Decision Support System for the Production of Miscanthus and Willow Briquettes," Energies, MDPI, vol. 13(6), pages 1-24, March.
    15. Nikola Bilandžija & Tajana Krička & Ana Matin & Josip Leto & Mateja Grubor, 2018. "Effect of Harvest Season on the Fuel Properties of Sida hermaphrodita (L.) Rusby Biomass as Solid Biofuel," Energies, MDPI, vol. 11(12), pages 1-13, December.
    16. Arkadiusz Dyjakon & Tomasz Noszczyk, 2019. "The Influence of Freezing Temperature Storage on the Mechanical Durability of Commercial Pellets from Biomass," Energies, MDPI, vol. 12(13), pages 1-13, July.
    17. Koçar, Günnur & Civaş, Nilgün, 2013. "An overview of biofuels from energy crops: Current status and future prospects," Renewable and Sustainable Energy Reviews, Elsevier, vol. 28(C), pages 900-916.
    18. Šiaudinis, Gintaras & Jasinskas, Algirdas & Šarauskis, Egidijus & Steponavičius, Dainius & Karčauskienė, Danutė & Liaudanskienė, Inga, 2015. "The assessment of Virginia mallow (Sida hermaphrodita Rusby) and cup plant (Silphium perfoliatum L.) productivity, physico–mechanical properties and energy expenses," Energy, Elsevier, vol. 93(P1), pages 606-612.
    19. Sławomir Obidziński & Magdalena Dołżyńska & Małgorzata Kowczyk-Sadowy & Krzysztof Jadwisieńczak & Paweł Sobczak, 2019. "Densification and Fuel Properties of Onion Husks," Energies, MDPI, vol. 12(24), pages 1-18, December.
    20. Ajay Kumar & David D. Jones & Milford A. Hanna, 2009. "Thermochemical Biomass Gasification: A Review of the Current Status of the Technology," Energies, MDPI, vol. 2(3), pages 1-26, July.
    21. Zawiślak, Kazimierz & Sobczak, Paweł & Kraszkiewicz, Artur & Niedziółka, Ignacy & Parafiniuk, Stanisław & Kuna-Broniowska, Izabela & Tanaś, Wojciech & Żukiewicz-Sobczak, Wioletta & Obidziński, Sławomi, 2020. "The use of lignocellulosic waste in the production of pellets for energy purposes," Renewable Energy, Elsevier, vol. 145(C), pages 997-1003.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Katarzyna Ławińska & Szymon Szufa & Andrzej Obraniak & Tomasz Olejnik & Robert Siuda & Jerzy Kwiatek & Dominika Ogrodowczyk, 2020. "Disc Granulation Process of Carbonation Lime Mud as a Method of Post-Production Waste Management," Energies, MDPI, vol. 13(13), pages 1-14, July.
    2. Robert Adamski & Dorota Siuta & Bożena Kukfisz & Michał Frydrysiak & Mirosława Prochoń, 2021. "Integration of Safety Aspects in Modeling of Superheated Steam Flash Drying of Tobacco," Energies, MDPI, vol. 14(18), pages 1-22, September.
    3. Yılmaz, Hasan & Çanakcı, Murad & Topakcı, Mehmet & Karayel, Davut & Yiğit, Mete & Ortaçeşme, Derya, 2023. "In-situ pelletization of campus biomass residues: Case study for Akdeniz University," Renewable Energy, Elsevier, vol. 212(C), pages 972-983.
    4. Sławomir Obidziński & Magdalena Joka Yildiz & Sebastian Dąbrowski & Jan Jasiński & Wojciech Czekała, 2022. "Application of Post-Flotation Dairy Sludge in the Production of Wood Pellets: Pelletization and Combustion Analysis," Energies, MDPI, vol. 15(24), pages 1-19, December.
    5. Krzysztof Mudryk & Marcin Jewiarz & Marek Wróbel & Marcin Niemiec & Arkadiusz Dyjakon, 2021. "Evaluation of Urban Tree Leaf Biomass-Potential, Physico-Mechanical and Chemical Parameters of Raw Material and Solid Biofuel," Energies, MDPI, vol. 14(4), pages 1-14, February.
    6. Sooraj Kumar & Suhail Ahmed Soomro & Khanji Harijan & Mohammad Aslam Uqaili & Laveet Kumar, 2023. "Advancements of Biochar-Based Catalyst for Improved Production of Biodiesel: A Comprehensive Review," Energies, MDPI, vol. 16(2), pages 1-20, January.
    7. Marek Wieruszewski & Aleksandra Górna & Zygmunt Stanula & Krzysztof Adamowicz, 2022. "Energy Use of Woody Biomass in Poland: Its Resources and Harvesting Form," Energies, MDPI, vol. 15(18), pages 1-21, September.
    8. Tomasz Hardy & Amit Arora & Halina Pawlak-Kruczek & Wojciech Rafajłowicz & Jerzy Wietrzych & Łukasz Niedźwiecki & Vishwajeet & Krzysztof Mościcki, 2021. "Non-Destructive Diagnostic Methods for Fire-Side Corrosion Risk Assessment of Industrial Scale Boilers, Burning Low Quality Solid Biofuels—A Mini Review," Energies, MDPI, vol. 14(21), pages 1-15, November.
    9. Moaaz Shehab & Camelia Stratulat & Kemal Ozcan & Aylin Boztepe & Alper Isleyen & Edwin Zondervan & Kai Moshammer, 2022. "A Comprehensive Analysis of the Risks Associated with the Determination of Biofuels’ Calorific Value by Bomb Calorimetry," Energies, MDPI, vol. 15(8), pages 1-20, April.
    10. Oleg Kucher & Taras Hutsol & Szymon Glowacki & Iryna Andreitseva & Anatolii Dibrova & Andrii Muzychenko & Anna Szeląg-Sikora & Agnieszka Szparaga & Sławomir Kocira, 2022. "Energy Potential of Biogas Production in Ukraine," Energies, MDPI, vol. 15(5), pages 1-22, February.
    11. Piotr Piersa & Szymon Szufa & Justyna Czerwińska & Hilal Ünyay & Łukasz Adrian & Grzegorz Wielgosinski & Andrzej Obraniak & Wiktoria Lewandowska & Marta Marczak-Grzesik & Maria Dzikuć & Zdzislawa Roma, 2021. "Pine Wood and Sewage Sludge Torrefaction Process for Production Renewable Solid Biofuels and Biochar as Carbon Carrier for Fertilizers," Energies, MDPI, vol. 14(23), pages 1-27, December.
    12. Tomasz Noszczyk & Arkadiusz Dyjakon & Jacek A. Koziel, 2021. "Kinetic Parameters of Nut Shells Pyrolysis," Energies, MDPI, vol. 14(3), pages 1-22, January.
    13. Weronika Kruszelnicka & Jakub Hlosta & Jan Diviš & Łukasz Gierz, 2021. "Study of the Relationships between Multi-Hole, Multi-Disc Mill Performance Parameters and Comminution Indicators," Sustainability, MDPI, vol. 13(15), pages 1-21, July.
    14. Haylemar de Nazaret Cardenas-Rodriguez & Rosa Martins & Levy Ely Lacerda Oliveira & Erik Leandro Bonaldi & Frederico de Oliveira Assuncao & Germano Lambert-Torres & Helcio Francisco Villa-Nova & Wilso, 2021. "Analysis on the Use of Briquettes as an Alternative to Improve the Generation of Thermal Energy in the Locality of Aripuana-Brazil," Energies, MDPI, vol. 14(19), pages 1-13, October.
    15. Zdzislawa Romanowska-Duda & Szymon Szufa & Mieczysław Grzesik & Krzysztof Piotrowski & Regina Janas, 2021. "The Promotive Effect of Cyanobacteria and Chlorella sp. Foliar Biofertilization on Growth and Metabolic Activities of Willow ( Salix viminalis L.) Plants as Feedstock Production, Solid Biofuel and Bio," Energies, MDPI, vol. 14(17), pages 1-21, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Marek Wróbel & Marcin Jewiarz & Krzysztof Mudryk & Adrian Knapczyk, 2020. "Influence of Raw Material Drying Temperature on the Scots Pine ( Pinus sylvestris L.) Biomass Agglomeration Process—A Preliminary Study," Energies, MDPI, vol. 13(7), pages 1-17, April.
    2. Rodolfo Picchio & Francesco Latterini & Rachele Venanzi & Walter Stefanoni & Alessandro Suardi & Damiano Tocci & Luigi Pari, 2020. "Pellet Production from Woody and Non-Woody Feedstocks: A Review on Biomass Quality Evaluation," Energies, MDPI, vol. 13(11), pages 1-20, June.
    3. Krzysztof Mudryk & Marcin Jewiarz & Marek Wróbel & Marcin Niemiec & Arkadiusz Dyjakon, 2021. "Evaluation of Urban Tree Leaf Biomass-Potential, Physico-Mechanical and Chemical Parameters of Raw Material and Solid Biofuel," Energies, MDPI, vol. 14(4), pages 1-14, February.
    4. Sławomir Francik & Bogusława Łapczyńska-Kordon & Norbert Pedryc & Wojciech Szewczyk & Renata Francik & Zbigniew Ślipek, 2022. "The Use of Artificial Neural Networks for Determining Values of Selected Strength Parameters of Miscanthus × Giganteus," Sustainability, MDPI, vol. 14(5), pages 1-26, March.
    5. Hívila M. P. Marreiro & Rogério S. Peruchi & Riuzuani M. B. P. Lopes & Silvia L. F. Andersen & Sayonara A. Eliziário & Paulo Rotella Junior, 2021. "Empirical Studies on Biomass Briquette Production: A Literature Review," Energies, MDPI, vol. 14(24), pages 1-40, December.
    6. Jakub Styks & Marek Wróbel & Jarosław Frączek & Adrian Knapczyk, 2020. "Effect of Compaction Pressure and Moisture Content on Quality Parameters of Perennial Biomass Pellets," Energies, MDPI, vol. 13(8), pages 1-20, April.
    7. Magdalena Dołżyńska & Sławomir Obidziński & Jolanta Piekut & Güray Yildiz, 2020. "The Utilization of Plum Stones for Pellet Production and Investigation of Post-Combustion Flue Gas Emissions," Energies, MDPI, vol. 13(19), pages 1-19, October.
    8. Stolarski, Mariusz J. & Stachowicz, Paweł & Dudziec, Paweł, 2022. "Wood pellet quality depending on dendromass species," Renewable Energy, Elsevier, vol. 199(C), pages 498-508.
    9. Adrian Knapczyk & Sławomir Francik & Marcin Jewiarz & Agnieszka Zawiślak & Renata Francik, 2020. "Thermal Treatment of Biomass: A Bibliometric Analysis—The Torrefaction Case," Energies, MDPI, vol. 14(1), pages 1-31, December.
    10. Shuren Chen & Yunfei Zhao & Zhong Tang & Hantao Ding & Zhan Su & Zhao Ding, 2022. "Structural Model of Straw Briquetting Machine with Vertical Ring Die and Optimization of Briquetting Performance," Agriculture, MDPI, vol. 12(5), pages 1-15, May.
    11. Nabavi-Pelesaraei, Ashkan & Azadi, Hossein & Van Passel, Steven & Saber, Zahra & Hosseini-Fashami, Fatemeh & Mostashari-Rad, Fatemeh & Ghasemi-Mobtaker, Hassan, 2021. "Prospects of solar systems in production chain of sunflower oil using cold press method with concentrating energy and life cycle assessment," Energy, Elsevier, vol. 223(C).
    12. Jankowski, Krzysztof Józef & Dubis, Bogdan & Sokólski, Mateusz Mikołaj & Załuski, Dariusz & Bórawski, Piotr & Szempliński, Władysław, 2019. "Biomass yield and energy balance of Virginia fanpetals in different production technologies in north-eastern Poland," Energy, Elsevier, vol. 185(C), pages 612-623.
    13. Neves, Renato Cruz & Klein, Bruno Colling & da Silva, Ricardo Justino & Rezende, Mylene Cristina Alves Ferreira & Funke, Axel & Olivarez-Gómez, Edgardo & Bonomi, Antonio & Maciel-Filho, Rubens, 2020. "A vision on biomass-to-liquids (BTL) thermochemical routes in integrated sugarcane biorefineries for biojet fuel production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 119(C).
    14. Jasinskas, Algirdas & Streikus, Dionizas & Vonžodas, Tomas, 2020. "Fibrous hemp (Felina 32, USO 31, Finola) and fibrous nettle processing and usage of pressed biofuel for energy purposes," Renewable Energy, Elsevier, vol. 149(C), pages 11-21.
    15. Andrzej Bryś & Agnieszka Kaleta & Krzysztof Górnicki & Szymon Głowacki & Weronika Tulej & Joanna Bryś & Piotr Wichowski, 2021. "Some Aspects of the Modelling of Thin-Layer Drying of Sawdust," Energies, MDPI, vol. 14(3), pages 1-16, January.
    16. Grzegorz Maj & Paweł Krzaczek & Wojciech Gołębiowski & Tomasz Słowik & Joanna Szyszlak-Bargłowicz & Grzegorz Zając, 2022. "Energy Consumption and Quality of Pellets Made of Waste from Corn Grain Drying Process," Sustainability, MDPI, vol. 14(13), pages 1-15, July.
    17. Nie, Yuhao & Bi, Xiaotao T., 2018. "Techno-economic assessment of transportation biofuels from hydrothermal liquefaction of forest residues in British Columbia," Energy, Elsevier, vol. 153(C), pages 464-475.
    18. Wentao Li & Mingfeng Wang & Fanbin Meng & Yifei Zhang & Bo Zhang, 2022. "A Review on the Effects of Pretreatment and Process Parameters on Properties of Pellets," Energies, MDPI, vol. 15(19), pages 1-23, October.
    19. Kasmuri, N.H. & Kamarudin, S.K. & Abdullah, S.R.S. & Hasan, H.A. & Som, A.Md., 2017. "Process system engineering aspect of bio-alcohol fuel production from biomass via pyrolysis: An overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 914-923.
    20. Mostafa, Mohamed E. & Hu, Song & Wang, Yi & Su, Sheng & Hu, Xun & Elsayed, Saad A. & Xiang, Jun, 2019. "The significance of pelletization operating conditions: An analysis of physical and mechanical characteristics as well as energy consumption of biomass pellets," Renewable and Sustainable Energy Reviews, Elsevier, vol. 105(C), pages 332-348.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:13:p:3392-:d:379281. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.