IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v189y2017icp506-519.html
   My bibliography  Save this article

Experimental characterization and simulation of a hybrid sensible-latent heat storage

Author

Listed:
  • Zauner, Christoph
  • Hengstberger, Florian
  • Mörzinger, Benjamin
  • Hofmann, Rene
  • Walter, Heimo

Abstract

Versatile and economically competitive thermal energy storages are necessary to fulfill the widely differing requirements for storages applied in renewable energy systems, process heat, district heating, power generation and domestic heating. We present the concept of a hybrid sensible-latent heat storage based on an adapted commercial shell-and-tube heat exchanger. The phase change material (PCM) is encapsulated within the tubes and thermal oil serves as sensible heat storage as well as the heat transfer medium. We designed and built a prototype using high density polyethylene (HDPE) as PCM and characterized the storage on a dedicated test rig at AIT. Energy capacities and power profiles are presented for different mass flows and (dis)charging temperatures. Two physical models were developed and implemented using the Modelica language. Dymola was used to simulate the behavior of the prototype storage. Very good agreement was achieved between simulation and experiment. Using the models, we studied the heat transfer within the storage in detail, which enabled us to present how to adapt the storage geometry and PCM properties to cover a broad range of applications. We discuss storage costs and calculate material costs per stored kilowatt-hour for different PCM-thermal oil volume ratios as a function of the tube outer diameter. Finally, we highlight the main advantages and design freedoms of our concept and describe concrete application scenarios in district heating and process heat.

Suggested Citation

  • Zauner, Christoph & Hengstberger, Florian & Mörzinger, Benjamin & Hofmann, Rene & Walter, Heimo, 2017. "Experimental characterization and simulation of a hybrid sensible-latent heat storage," Applied Energy, Elsevier, vol. 189(C), pages 506-519.
    • Handle: RePEc:eee:appene:v:189:y:2017:i:c:p:506-519
    DOI: 10.1016/j.apenergy.2016.12.079
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261916318451
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2016.12.079?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Pereira da Cunha, Jose & Eames, Philip, 2016. "Thermal energy storage for low and medium temperature applications using phase change materials – A review," Applied Energy, Elsevier, vol. 177(C), pages 227-238.
    2. López-Navarro, A. & Biosca-Taronger, J. & Corberán, J.M. & Peñalosa, C. & Lázaro, A. & Dolado, P. & Payá, J., 2014. "Performance characterization of a PCM storage tank," Applied Energy, Elsevier, vol. 119(C), pages 151-162.
    3. Vogel, J. & Felbinger, J. & Johnson, M., 2016. "Natural convection in high temperature flat plate latent heat thermal energy storage systems," Applied Energy, Elsevier, vol. 184(C), pages 184-196.
    4. Merlin, Kevin & Soto, Jérôme & Delaunay, Didier & Traonvouez, Luc, 2016. "Industrial waste heat recovery using an enhanced conductivity latent heat thermal energy storage," Applied Energy, Elsevier, vol. 183(C), pages 491-503.
    5. Xu, Ben & Li, Peiwen & Chan, Cholik, 2015. "Application of phase change materials for thermal energy storage in concentrated solar thermal power plants: A review to recent developments," Applied Energy, Elsevier, vol. 160(C), pages 286-307.
    6. Arteconi, Alessia & Ciarrocchi, Eleonora & Pan, Quanwen & Carducci, Francesco & Comodi, Gabriele & Polonara, Fabio & Wang, Ruzhu, 2017. "Thermal energy storage coupled with PV panels for demand side management of industrial building cooling loads," Applied Energy, Elsevier, vol. 185(P2), pages 1984-1993.
    7. Longeon, Martin & Soupart, Adèle & Fourmigué, Jean-François & Bruch, Arnaud & Marty, Philippe, 2013. "Experimental and numerical study of annular PCM storage in the presence of natural convection," Applied Energy, Elsevier, vol. 112(C), pages 175-184.
    8. Wang, Wei-Wei & Wang, Liang-Bi & He, Ya-Ling, 2015. "The energy efficiency ratio of heat storage in one shell-and-one tube phase change thermal energy storage unit," Applied Energy, Elsevier, vol. 138(C), pages 169-182.
    9. Nithyanandam, K. & Pitchumani, R., 2014. "Design of a latent thermal energy storage system with embedded heat pipes," Applied Energy, Elsevier, vol. 126(C), pages 266-280.
    10. Xiao, X. & Zhang, P., 2015. "Numerical and experimental study of heat transfer characteristics of a shell-tube latent heat storage system: Part I – Charging process," Energy, Elsevier, vol. 79(C), pages 337-350.
    11. Pirasaci, Tolga & Goswami, D. Yogi, 2016. "Influence of design on performance of a latent heat storage system for a direct steam generation power plant," Applied Energy, Elsevier, vol. 162(C), pages 644-652.
    12. Pointner, Harald & Steinmann, Wolf-Dieter, 2016. "Experimental demonstration of an active latent heat storage concept," Applied Energy, Elsevier, vol. 168(C), pages 661-671.
    13. Arteconi, A. & Hewitt, N.J. & Polonara, F., 2012. "State of the art of thermal storage for demand-side management," Applied Energy, Elsevier, vol. 93(C), pages 371-389.
    14. Miró, Laia & Gasia, Jaume & Cabeza, Luisa F., 2016. "Thermal energy storage (TES) for industrial waste heat (IWH) recovery: A review," Applied Energy, Elsevier, vol. 179(C), pages 284-301.
    15. Zhang, P. & Ma, F. & Xiao, X., 2016. "Thermal energy storage and retrieval characteristics of a molten-salt latent heat thermal energy storage system," Applied Energy, Elsevier, vol. 173(C), pages 255-271.
    16. Xiao, X. & Zhang, P., 2015. "Numerical and experimental study of heat transfer characteristics of a shell-tube latent heat storage system: Part II – Discharging process," Energy, Elsevier, vol. 80(C), pages 177-189.
    17. Alimohammadisagvand, Behrang & Jokisalo, Juha & Kilpeläinen, Simo & Ali, Mubbashir & Sirén, Kai, 2016. "Cost-optimal thermal energy storage system for a residential building with heat pump heating and demand response control," Applied Energy, Elsevier, vol. 174(C), pages 275-287.
    18. Tehrani, S. Saeed Mostafavi & Taylor, Robert A. & Saberi, Pouya & Diarce, Gonzalo, 2016. "Design and feasibility of high temperature shell and tube latent heat thermal energy storage system for solar thermal power plants," Renewable Energy, Elsevier, vol. 96(PA), pages 120-136.
    19. Díaz, Guzmán & Moreno, Blanca, 2016. "Valuation under uncertain energy prices and load demands of micro-CHP plants supplemented by optimally switched thermal energy storage," Applied Energy, Elsevier, vol. 177(C), pages 553-569.
    20. Guo, Shaopeng & Zhao, Jun & Wang, Weilong & Yan, Jinyue & Jin, Guang & Zhang, Zhiyu & Gu, Jie & Niu, Yonghong, 2016. "Numerical study of the improvement of an indirect contact mobilized thermal energy storage container," Applied Energy, Elsevier, vol. 161(C), pages 476-486.
    21. Renaldi, R. & Kiprakis, A. & Friedrich, D., 2017. "An optimisation framework for thermal energy storage integration in a residential heat pump heating system," Applied Energy, Elsevier, vol. 186(P3), pages 520-529.
    22. Laing, Doerte & Bauer, Thomas & Breidenbach, Nils & Hachmann, Bernd & Johnson, Maike, 2013. "Development of high temperature phase-change-material storages," Applied Energy, Elsevier, vol. 109(C), pages 497-504.
    23. Tao, Y.B. & Carey, V.P., 2016. "Effects of PCM thermophysical properties on thermal storage performance of a shell-and-tube latent heat storage unit," Applied Energy, Elsevier, vol. 179(C), pages 203-210.
    24. Agyenim, Francis & Hewitt, Neil & Eames, Philip & Smyth, Mervyn, 2010. "A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(2), pages 615-628, February.
    25. Wagner, Sharon J. & Rubin, Edward S., 2014. "Economic implications of thermal energy storage for concentrated solar thermal power," Renewable Energy, Elsevier, vol. 61(C), pages 81-95.
    26. Zauner, Christoph & Hengstberger, Florian & Etzel, Mark & Lager, Daniel & Hofmann, Rene & Walter, Heimo, 2016. "Experimental characterization and simulation of a fin-tube latent heat storage using high density polyethylene as PCM," Applied Energy, Elsevier, vol. 179(C), pages 237-246.
    27. Fornarelli, F. & Camporeale, S.M. & Fortunato, B. & Torresi, M. & Oresta, P. & Magliocchetti, L. & Miliozzi, A. & Santo, G., 2016. "CFD analysis of melting process in a shell-and-tube latent heat storage for concentrated solar power plants," Applied Energy, Elsevier, vol. 164(C), pages 711-722.
    28. Soler, Mònica Subirats & Sabaté, Carles Civit & Santiago, Víctor Benito & Jabbari, Faryar, 2016. "Optimizing performance of a bank of chillers with thermal energy storage," Applied Energy, Elsevier, vol. 172(C), pages 275-285.
    29. Tay, N.H.S. & Belusko, M. & Liu, M. & Bruno, F., 2015. "Investigation of the effect of dynamic melting in a tube-in-tank PCM system using a CFD model," Applied Energy, Elsevier, vol. 137(C), pages 738-747.
    30. Zipf, Verena & Neuhäuser, Anton & Willert, Daniel & Nitz, Peter & Gschwander, Stefan & Platzer, Werner, 2013. "High temperature latent heat storage with a screw heat exchanger: Design of prototype," Applied Energy, Elsevier, vol. 109(C), pages 462-469.
    31. Tay, N.H.S. & Bruno, F. & Belusko, M., 2013. "Experimental investigation of dynamic melting in a tube-in-tank PCM system," Applied Energy, Elsevier, vol. 104(C), pages 137-148.
    32. Jacob, Rhys & Belusko, Martin & Inés Fernández, A. & Cabeza, Luisa F. & Saman, Wasim & Bruno, Frank, 2016. "Embodied energy and cost of high temperature thermal energy storage systems for use with concentrated solar power plants," Applied Energy, Elsevier, vol. 180(C), pages 586-597.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zuo, Hongyang & Zhou, Yuan & Wu, Mingyang & Zeng, Kuo & Chang, Zheshao & Chen, Sheng & Lu, Wang & Flamant, Gilles, 2021. "Development and numerical investigation of parallel combined sensible-latent heat storage unit with intermittent flow for concentrated solar power plants," Renewable Energy, Elsevier, vol. 175(C), pages 29-43.
    2. Ma, Zhao & Li, Ming-Jia & Zhang, K. Max & Yuan, Fan, 2021. "Novel designs of hybrid thermal energy storage system and operation strategies for concentrated solar power plant," Energy, Elsevier, vol. 216(C).
    3. Shan, Lianying & Martin, Andrew & Chiu, Justin NingWei, 2024. "Techno-economic analysis of latent heat thermal energy storage integrated heat pump for indoor heating," Energy, Elsevier, vol. 298(C).
    4. Kasper, Lukas & Pernsteiner, Dominik & Schirrer, Alexander & Jakubek, Stefan & Hofmann, René, 2023. "Experimental characterization, parameter identification and numerical sensitivity analysis of a novel hybrid sensible/latent thermal energy storage prototype for industrial retrofit applications," Applied Energy, Elsevier, vol. 344(C).
    5. Englmair, Gerald & Moser, Christoph & Schranzhofer, Hermann & Fan, Jianhua & Furbo, Simon, 2019. "A solar combi-system utilizing stable supercooling of sodium acetate trihydrate for heat storage: Numerical performance investigation," Applied Energy, Elsevier, vol. 242(C), pages 1108-1120.
    6. Englmair, Gerald & Moser, Christoph & Furbo, Simon & Dannemand, Mark & Fan, Jianhua, 2018. "Design and functionality of a segmented heat-storage prototype utilizing stable supercooling of sodium acetate trihydrate in a solar heating system," Applied Energy, Elsevier, vol. 221(C), pages 522-534.
    7. Veronika Stahl & Werner Kraft & Peter Vetter & Florian Feder, 2021. "Simulative Investigation of Thermal Capacity Analysis Methods for Metallic Latent Thermal Energy Storage Systems," Energies, MDPI, vol. 14(8), pages 1-14, April.
    8. Vigneshwaran, K. & Sodhi, Gurpreet Singh & Muthukumar, P. & Guha, Anurag & Senthilmurugan, S., 2019. "Experimental and numerical investigations on high temperature cast steel based sensible heat storage system," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    9. Zauner, Christoph & Windholz, Bernd & Lauermann, Michael & Drexler-Schmid, Gerwin & Leitgeb, Thomas, 2020. "Development of an Energy Efficient Extrusion Factory employing a latent heat storage and a high temperature heat pump," Applied Energy, Elsevier, vol. 259(C).
    10. Vigneshwaran, K. & Sodhi, Gurpreet Singh & Guha, Anurag & Muthukumar, P. & Subbiah, Senthilmurugan, 2020. "Coupling strategy of multi-module high temperature solid sensible heat storage system for large scale application," Applied Energy, Elsevier, vol. 278(C).
    11. Dusek, Sabrina & Hofmann, René & Gruber, Stephan, 2019. "Design analysis of a hybrid storage concept combining Ruths steam storage and latent thermal energy storage," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    12. M. Mofijur & Teuku Meurah Indra Mahlia & Arridina Susan Silitonga & Hwai Chyuan Ong & Mahyar Silakhori & Muhammad Heikal Hasan & Nandy Putra & S.M. Ashrafur Rahman, 2019. "Phase Change Materials (PCM) for Solar Energy Usages and Storage: An Overview," Energies, MDPI, vol. 12(16), pages 1-20, August.
    13. Sabrina Dusek & René Hofmann, 2019. "Modeling of a Hybrid Steam Storage and Validation with an Industrial Ruths Steam Storage Line," Energies, MDPI, vol. 12(6), pages 1-21, March.
    14. Soh, Alex & Huang, Zhifeng & Shao, Yunlin & Islam, M.R. & Chua, K.J., 2023. "On the study of a thermal system for continuous cold energy harvesting and supply from LNG regasification," Energy, Elsevier, vol. 275(C).
    15. Niknam, Pouriya H & Sciacovelli, Adriano, 2023. "Hybrid PCM-steam thermal energy storage for industrial processes – Link between thermal phenomena and techno-economic performance through dynamic modelling," Applied Energy, Elsevier, vol. 331(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mostafavi Tehrani, S. Saeed & Shoraka, Yashar & Diarce, Gonzalo & Taylor, Robert A., 2019. "An improved, generalized effective thermal conductivity method for rapid design of high temperature shell-and-tube latent heat thermal energy storage systems," Renewable Energy, Elsevier, vol. 132(C), pages 694-708.
    2. Seddegh, Saeid & Wang, Xiaolin & Joybari, Mahmood Mastani & Haghighat, Fariborz, 2017. "Investigation of the effect of geometric and operating parameters on thermal behavior of vertical shell-and-tube latent heat energy storage systems," Energy, Elsevier, vol. 137(C), pages 69-82.
    3. Mostafavi Tehrani, S. Saeed & Shoraka, Yashar & Nithyanandam, Karthik & Taylor, Robert A., 2019. "Shell-and-tube or packed bed thermal energy storage systems integrated with a concentrated solar power: A techno-economic comparison of sensible and latent heat systems," Applied Energy, Elsevier, vol. 238(C), pages 887-910.
    4. Zauner, Christoph & Hengstberger, Florian & Etzel, Mark & Lager, Daniel & Hofmann, Rene & Walter, Heimo, 2016. "Experimental characterization and simulation of a fin-tube latent heat storage using high density polyethylene as PCM," Applied Energy, Elsevier, vol. 179(C), pages 237-246.
    5. Meng, Z.N. & Zhang, P., 2017. "Experimental and numerical investigation of a tube-in-tank latent thermal energy storage unit using composite PCM," Applied Energy, Elsevier, vol. 190(C), pages 524-539.
    6. Li, Zhi & Lu, Yiji & Huang, Rui & Chang, Jinwei & Yu, Xiaonan & Jiang, Ruicheng & Yu, Xiaoli & Roskilly, Anthony Paul, 2021. "Applications and technological challenges for heat recovery, storage and utilisation with latent thermal energy storage," Applied Energy, Elsevier, vol. 283(C).
    7. Li, Yantong & Huang, Gongsheng & Xu, Tao & Liu, Xiaoping & Wu, Huijun, 2018. "Optimal design of PCM thermal storage tank and its application for winter available open-air swimming pool," Applied Energy, Elsevier, vol. 209(C), pages 224-235.
    8. Parsazadeh, Mohammad & Duan, Xili, 2018. "Numerical study on the effects of fins and nanoparticles in a shell and tube phase change thermal energy storage unit," Applied Energy, Elsevier, vol. 216(C), pages 142-156.
    9. Xun Yang & Teng Xiong & Jing Liang Dong & Wen Xin Li & Yong Wang, 2017. "Investigation of the Dynamic Melting Process in a Thermal Energy Storage Unit Using a Helical Coil Heat Exchanger," Energies, MDPI, vol. 10(8), pages 1-18, August.
    10. Liu, Ming & Steven Tay, N.H. & Bell, Stuart & Belusko, Martin & Jacob, Rhys & Will, Geoffrey & Saman, Wasim & Bruno, Frank, 2016. "Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 1411-1432.
    11. Kirincic, Mateo & Trp, Anica & Lenic, Kristian, 2021. "Influence of natural convection during melting and solidification of paraffin in a longitudinally finned shell-and-tube latent thermal energy storage on the applicability of developed numerical models," Renewable Energy, Elsevier, vol. 179(C), pages 1329-1344.
    12. Ding, Zhixiong & Wu, Wei & Leung, Michael, 2021. "Advanced/hybrid thermal energy storage technology: material, cycle, system and perspective," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    13. Tiwari, Vivek & Rai, Aakash C. & Srinivasan, P., 2021. "Parametric analysis and optimization of a latent heat thermal energy storage system for concentrated solar power plants under realistic operating conditions," Renewable Energy, Elsevier, vol. 174(C), pages 305-319.
    14. Beust, Clément & Franquet, Erwin & Bédécarrats, Jean-Pierre & Garcia, Pierre, 2020. "Predictive approach of heat transfer for the modelling of large-scale latent heat storages," Renewable Energy, Elsevier, vol. 157(C), pages 502-514.
    15. Solé, Aran & Falcoz, Quentin & Cabeza, Luisa F. & Neveu, Pierre, 2018. "Geometry optimization of a heat storage system for concentrated solar power plants (CSP)," Renewable Energy, Elsevier, vol. 123(C), pages 227-235.
    16. Jayathunga, D.S. & Karunathilake, H.P. & Narayana, M. & Witharana, S., 2024. "Phase change material (PCM) candidates for latent heat thermal energy storage (LHTES) in concentrated solar power (CSP) based thermal applications - A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 189(PB).
    17. Xu, Tianhao & Gunasekara, Saman Nimali & Chiu, Justin Ningwei & Palm, Björn & Sawalha, Samer, 2020. "Thermal behavior of a sodium acetate trihydrate-based PCM: T-history and full-scale tests," Applied Energy, Elsevier, vol. 261(C).
    18. Liu, Yang & Zheng, Ruowei & Li, Ji, 2022. "High latent heat phase change materials (PCMs) with low melting temperature for thermal management and storage of electronic devices and power batteries: Critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    19. Luerssen, Christoph & Gandhi, Oktoviano & Reindl, Thomas & Sekhar, Chandra & Cheong, David, 2019. "Levelised Cost of Storage (LCOS) for solar-PV-powered cooling in the tropics," Applied Energy, Elsevier, vol. 242(C), pages 640-654.
    20. Du, Kun & Calautit, John & Wang, Zhonghua & Wu, Yupeng & Liu, Hao, 2018. "A review of the applications of phase change materials in cooling, heating and power generation in different temperature ranges," Applied Energy, Elsevier, vol. 220(C), pages 242-273.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:189:y:2017:i:c:p:506-519. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.