IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v107y2013icp111-123.html
   My bibliography  Save this article

Interaction of iron–copper mixed metal oxide oxygen carriers with simulated synthesis gas derived from steam gasification of coal

Author

Listed:
  • Siriwardane, Ranjani V.
  • Ksepko, Ewelina
  • Tian, Hanjing
  • Poston, James
  • Simonyi, Thomas
  • Sciazko, Marek

Abstract

The objective of this work was to prepare supported bimetallic Fe–Cu oxygen carriers and to evaluate their performance for the chemical-looping combustion (CLC) process with simulated synthesis gas derived from steam gasification of coal/air. Ten-cycle CLC tests were conducted with Fe–Cu oxygen carriers in an atmospheric thermogravimetric analyzer utilizing simulated synthesis gas derived from the steam gasification of Polish Janina coal and Illinois #6 coal as fuel. The effect of temperature on reaction rates, chemical stability, and oxygen transport capacity were determined. Fractional reduction, fractional oxidation, and global rates of reactions were calculated from the thermogravimetric analysis (TGA) data. The supports greatly affected reaction performance. Data showed that reaction rates and oxygen capacities were stable during the 10-cycle TGA tests for most Fe–Cu/support oxygen carriers. Bimetallic Fe–Cu/support oxygen carriers showed higher reduction rates than Fe-support oxygen carriers. The carriers containing higher Cu content showed better stabilities and better reduction rates. An increase in temperature from 800°C to 900°C did not have a significant effect on either the oxygen capacity or the reduction rates with synthesis gas derived from Janina coal. Oxidation reaction was significantly faster than reduction reaction for all supported Fe–Cu oxygen carriers. Carriers with higher Cu content had lower oxidation rates. Ten-cycle TGA data indicated that these oxygen carriers had stable performances at 800–900°C and might be successfully used up to 900°C for coal CLC reaction in the presence of steam.

Suggested Citation

  • Siriwardane, Ranjani V. & Ksepko, Ewelina & Tian, Hanjing & Poston, James & Simonyi, Thomas & Sciazko, Marek, 2013. "Interaction of iron–copper mixed metal oxide oxygen carriers with simulated synthesis gas derived from steam gasification of coal," Applied Energy, Elsevier, vol. 107(C), pages 111-123.
    • Handle: RePEc:eee:appene:v:107:y:2013:i:c:p:111-123
    DOI: 10.1016/j.apenergy.2013.01.063
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261913000743
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2013.01.063?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wang, Jinsheng & Anthony, Edward J., 2008. "Clean combustion of solid fuels," Applied Energy, Elsevier, vol. 85(2-3), pages 73-79, February.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chang, F.C. & Liao, P.H. & Tsai, C.K. & Hsiao, M.C. & Paul Wang, H., 2014. "Chemical-looping combustion of syngas with nano CuO–NiO on chabazite," Applied Energy, Elsevier, vol. 113(C), pages 1731-1736.
    2. Zhang, Shuai & Xiao, Rui & Zheng, Wenguang, 2014. "Comparative study between fluidized-bed and fixed-bed operation modes in pressurized chemical looping combustion of coal," Applied Energy, Elsevier, vol. 130(C), pages 181-189.
    3. Benincosa, William & Siriwardane, Ranjani & Tian, Hanjing & Riley, Jarrett, 2017. "Unique phase identification of trimetallic copper iron manganese oxygen carrier using simultaneous differential scanning calorimetry/thermogravimetric analysis during chemical looping combustion react," Applied Energy, Elsevier, vol. 203(C), pages 522-534.
    4. Siriwardane, Ranjani & Riley, Jarrett & Atallah, Chris, 2022. "CO2 utilization potential of a novel calcium ferrite based looping process fueled with coal: Experimental evaluation of various coal feedstocks and thermodynamic integrated process analysis," Applied Energy, Elsevier, vol. 323(C).
    5. Fredrik Hildor & Henrik Leion & Tobias Mattisson, 2022. "Steel Converter Slag as an Oxygen Carrier—Interaction with Sulfur Dioxide," Energies, MDPI, vol. 15(16), pages 1-29, August.
    6. Ksepko, Ewelina & Sciazko, Marek & Babinski, Piotr, 2014. "Studies on the redox reaction kinetics of Fe2O3–CuO/Al2O3 and Fe2O3/TiO2 oxygen carriers," Applied Energy, Elsevier, vol. 115(C), pages 374-383.
    7. Cho, Won Chul & Lee, Do Yeon & Seo, Myung Won & Kim, Sang Done & Kang, KyoungSoo & Bae, Ki Kwang & Kim, Change Hee & Jeong, SeongUk & Park, Chu Sik, 2014. "Continuous operation characteristics of chemical looping hydrogen production system," Applied Energy, Elsevier, vol. 113(C), pages 1667-1674.
    8. Zhang, Yongxing & Doroodchi, Elham & Moghtaderi, Behdad, 2014. "Chemical looping combustion of ultra low concentration of methane with Fe2O3/Al2O3 and CuO/SiO2," Applied Energy, Elsevier, vol. 113(C), pages 1916-1923.
    9. Riley, Jarrett & Siriwardane, Ranjani & Tian, Hanjing & Benincosa, William & Poston, James, 2018. "Experimental and kinetic analysis for particle scale modeling of a CuO-Fe2O3-Al2O3 oxygen carrier during reduction with H2 in chemical looping combustion applications," Applied Energy, Elsevier, vol. 228(C), pages 1515-1530.
    10. Siriwardane, Ranjani & Tian, Hanjing & Miller, Duane & Richards, George, 2015. "Fluidized bed testing of commercially prepared MgO-promoted hematite and CuO–Fe2O3 mixed metal oxide oxygen carriers for methane and coal chemical looping combustion," Applied Energy, Elsevier, vol. 157(C), pages 348-357.
    11. Nadgouda, Sourabh G. & Guo, Mengqing & Tong, Andrew & Fan, L.-S., 2019. "High purity syngas and hydrogen coproduction using copper-iron oxygen carriers in chemical looping reforming process," Applied Energy, Elsevier, vol. 235(C), pages 1415-1426.
    12. Zhang, Jinzhi & He, Tao & Wang, Zhiqi & Zhu, Min & Zhang, Ke & Li, Bin & Wu, Jinhu, 2017. "The search of proper oxygen carriers for chemical looping partial oxidation of carbon," Applied Energy, Elsevier, vol. 190(C), pages 1119-1125.
    13. Siriwardane, Ranjani & Riley, Jarrett & Benincosa, William & Bayham, Samuel & Bobek, Michael & Straub, Douglas & Weber, Justin, 2021. "Development of CuFeMnAlO4+δ oxygen carrier with high attrition resistance and 50-kWth methane/air chemical looping combustion tests," Applied Energy, Elsevier, vol. 286(C).
    14. Zhu, Yanyan & Jin, Nannan & Liu, Ruilin & Sun, Xueyan & Bai, Lei & Tian, Hanjing & Ma, Xiaoxun & Wang, Xiaodong, 2020. "Bimetallic BaFe2MAl9O19 (M = Mn, Ni, and Co) hexaaluminates as oxygen carriers for chemical looping dry reforming of methane," Applied Energy, Elsevier, vol. 258(C).
    15. Shuai Zhang & Rui Xiao, 2016. "Performance of iron ore oxygen carrier modified by biomass ashes in coal‐fueled chemical looping combustion," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 6(5), pages 695-709, October.
    16. Siriwardane, Ranjani & Riley, Jarrett & Tian, Hanjing & Richards, George, 2016. "Chemical looping coal gasification with calcium ferrite and barium ferrite via solid–solid reactions," Applied Energy, Elsevier, vol. 165(C), pages 952-966.
    17. Benincosa, William & Siriwardane, Ranjani & Tian, Hanjing & Riley, Jarrett & Poston, James, 2020. "A particle-scale reduction model of copper iron manganese oxide with CO for chemical looping combustion," Applied Energy, Elsevier, vol. 262(C).
    18. Ksepko, Ewelina & Babiński, Piotr & Nalbandian, Lori, 2017. "The redox reaction kinetics of Sinai ore for chemical looping combustion applications," Applied Energy, Elsevier, vol. 190(C), pages 1258-1274.
    19. Yazdanpanah, M.M. & Forret, A. & Gauthier, T. & Delebarre, A., 2014. "Modeling of CH4 combustion with NiO/NiAl2O4 in a 10kWth CLC pilot plant," Applied Energy, Elsevier, vol. 113(C), pages 1933-1944.
    20. Siriwardane, Ranjani & Benincosa, William & Riley, Jarrett & Tian, Hanjing & Richards, George, 2016. "Investigation of reactions in a fluidized bed reactor during chemical looping combustion of coal/steam with copper oxide-iron oxide-alumina oxygen carrier," Applied Energy, Elsevier, vol. 183(C), pages 1550-1564.
    21. Tian, Xin & Zhao, Haibo & Ma, Jinchen, 2017. "Cement bonded fine hematite and copper ore particles as oxygen carrier in chemical looping combustion," Applied Energy, Elsevier, vol. 204(C), pages 242-253.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Shiyuan & Li, Haoyu & Li, Wei & Xu, Mingxin & Eddings, Eric G. & Ren, Qiangqiang & Lu, Qinggang, 2017. "Coal combustion emission and ash formation characteristics at high oxygen concentration in a 1MWth pilot-scale oxy-fuel circulating fluidized bed," Applied Energy, Elsevier, vol. 197(C), pages 203-211.
    2. Imtiaz, Qasim & Broda, Marcin & Müller, Christoph R., 2014. "Structure–property relationship of co-precipitated Cu-rich, Al2O3- or MgAl2O4-stabilized oxygen carriers for chemical looping with oxygen uncoupling (CLOU)," Applied Energy, Elsevier, vol. 119(C), pages 557-565.
    3. Belhadi, A. & Boumaza, S. & Trari, M., 2011. "Photoassisted hydrogen production under visible light over NiO/ZnO hetero-system," Applied Energy, Elsevier, vol. 88(12), pages 4490-4495.
    4. Zhang, Yongxing & Doroodchi, Elham & Moghtaderi, Behdad, 2014. "Chemical looping combustion of ultra low concentration of methane with Fe2O3/Al2O3 and CuO/SiO2," Applied Energy, Elsevier, vol. 113(C), pages 1916-1923.
    5. Aisyah, L. & Ashman, P.J. & Kwong, C.W., 2013. "Performance of coal fly-ash based oxygen carrier for the chemical looping combustion of synthesis gas," Applied Energy, Elsevier, vol. 109(C), pages 44-50.
    6. Zhang, Shuai & Xiao, Rui & Zheng, Wenguang, 2014. "Comparative study between fluidized-bed and fixed-bed operation modes in pressurized chemical looping combustion of coal," Applied Energy, Elsevier, vol. 130(C), pages 181-189.
    7. Ksepko, Ewelina & Sciazko, Marek & Babinski, Piotr, 2014. "Studies on the redox reaction kinetics of Fe2O3–CuO/Al2O3 and Fe2O3/TiO2 oxygen carriers," Applied Energy, Elsevier, vol. 115(C), pages 374-383.
    8. Meng, William X. & Banerjee, Subhodeep & Zhang, Xiao & Agarwal, Ramesh K., 2015. "Process simulation of multi-stage chemical-looping combustion using Aspen Plus," Energy, Elsevier, vol. 90(P2), pages 1869-1877.
    9. Li, Kangkang & Yu, Hai & Qi, Guojie & Feron, Paul & Tade, Moses & Yu, Jingwen & Wang, Shujuan, 2015. "Rate-based modelling of combined SO2 removal and NH3 recycling integrated with an aqueous NH3-based CO2 capture process," Applied Energy, Elsevier, vol. 148(C), pages 66-77.
    10. Sreenivasulu, B. & Gayatri, D.V. & Sreedhar, I. & Raghavan, K.V., 2015. "A journey into the process and engineering aspects of carbon capture technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 1324-1350.
    11. Zhang, Xiaosong & Jin, Hongguang, 2013. "Thermodynamic analysis of chemical-looping hydrogen generation," Applied Energy, Elsevier, vol. 112(C), pages 800-807.
    12. Sun, Zhongwei & Wang, Shengwei & Zhou, Qulan & Hui, Shi'en, 2010. "Experimental study on desulfurization efficiency and gas-liquid mass transfer in a new liquid-screen desulfurization system," Applied Energy, Elsevier, vol. 87(5), pages 1505-1512, May.
    13. Gao, Xiang & Ding, Honglei & Du, Zhen & Wu, Zuliang & Fang, Mengxiang & Luo, Zhongyang & Cen, Kefa, 2010. "Gas-liquid absorption reaction between (NH4)2SO3 solution and SO2 for ammonia-based wet flue gas desulfurization," Applied Energy, Elsevier, vol. 87(8), pages 2647-2651, August.
    14. Cho, Won Chul & Lee, Do Yeon & Seo, Myung Won & Kim, Sang Done & Kang, KyoungSoo & Bae, Ki Kwang & Kim, Change Hee & Jeong, SeongUk & Park, Chu Sik, 2014. "Continuous operation characteristics of chemical looping hydrogen production system," Applied Energy, Elsevier, vol. 113(C), pages 1667-1674.
    15. Boumaza, S. & Boudjemaa, A. & Bouguelia, A. & Bouarab, R. & Trari, M., 2010. "Visible light induced hydrogen evolution on new hetero-system ZnFe2O4/SrTiO3," Applied Energy, Elsevier, vol. 87(7), pages 2230-2236, July.
    16. Wang, Yuelan & Ma, Zengyi & Shen, Yueliang & Tang, Yijun & Ni, Mingjiang & Chi, Yong & Yan, Jianhua & Cen, Kefa, 2016. "A power-saving control strategy for reducing the total pressure applied by the primary air fan of a coal-fired power plant," Applied Energy, Elsevier, vol. 175(C), pages 380-388.
    17. Cho, Won Chul & Lee, Doyeon & Kim, Chang Hee & Cho, Hyun Suk & Kim, Sang Done, 2018. "Feasibility study of the use of by-product iron oxide and industrial off-gas for application to chemical looping hydrogen production," Applied Energy, Elsevier, vol. 216(C), pages 466-481.
    18. Hashim, S.S. & Mohamed, A.R. & Bhatia, S., 2011. "Oxygen separation from air using ceramic-based membrane technology for sustainable fuel production and power generation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(2), pages 1284-1293, February.
    19. Haider, S.K. & Azimi, G. & Duan, L. & Anthony, E.J. & Patchigolla, K. & Oakey, J.E. & Leion, H. & Mattisson, T. & Lyngfelt, A., 2016. "Enhancing properties of iron and manganese ores as oxygen carriers for chemical looping processes by dry impregnation," Applied Energy, Elsevier, vol. 163(C), pages 41-50.
    20. Schwebel, G.L. & Filippou, D. & Hudon, G. & Tworkowski, M. & Gipperich, A. & Krumm, W., 2014. "Experimental comparison of two different ilmenites in fluidized bed and fixed bed chemical-looping combustion," Applied Energy, Elsevier, vol. 113(C), pages 1902-1908.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:107:y:2013:i:c:p:111-123. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.