Printed from https://ideas.repec.org/s/ids/ijmtma3.html
Content
2010, Volume 21, Issue 1/2
- 194-205 Effect of imperfect interfaces on Elastothermodynamic Damping of fibre-reinforced MMCs
by S.K. Srivastava & B.K. Mishra & S.C. Jain
2010, Volume 20, Issue 1/2/3/4
- 4-24 The sliding frame – extending the concept to various assembly line balancing problems
by Yuval Cohen & Ezey Dar-El - 25-45 An empirical comparison of improvement heuristics for the mixed-model U-line balancing problem
by John K. Visich & Basheer M. Khumawala & Joaquin Diaz-Saiz - 46-58 The performance of unpaced production lines with unequal operating time variabilities and buffer sizes
by Sabry Shaaban - 59-74 Modelling the allocation of protective capacity to design unbalanced production lines
by M. Caridi & R. Cigolini - 75-93 Adaptive Kanban control systems for two-stage production lines
by Katsuhiko Takahashi & Katsumi Morikawa & Daisuke Hirotani & Takeshi Yoshikawa - 94-119 An investigation of the influence of coefficient of variation in the demand distribution on the performance of several lean production control strategies
by John Geraghty & Cathal Heavey - 120-155 System model of production inventory control
by Dirk Pons - 156-168 Factorial effects on the performance of closed-loop asynchronous automatic assembly systems
by Wai Keung Leung & W.C. Ng - 169-196 An overview and comparison of four sequence generating methods for robotic assembly
by B.B. Biswal & B.B. Choudhury & D. Mishra & P. Dash - 197-221 Cell formation considering real-life production parameters
by Amit Rai Dixit & P.K. Mishra - 222-241 Operator assignment/reassignment problems in incremental cell formation
by G. Kumara Raja Singh & G. Srinivasan - 242-258 Performance evaluation of hybrid-CLP vs. GA: non-permutation flowshop with constrained resequencing buffers
by Gerrit Farber & Anna M. Coves Moreno & Said Salhi - 259-285 Supervisory-based capacity allocation control for manufacturing systems
by Karim Tamani & Reda Boukezzoula & Georges Habchi - 286-299 Multistage production systems with random yields and rigid demand
by Tal Ben-Zvi & Abraham Grosfeld-Nir - 300-315 Yield management in TFT-LCD manufacturing by using regression and neural network techniques
by Kun-Lin Hsieh - 316-330 Solving the response time variability problem by means of the cross-entropy method
by Alberto Garcia-Villoria & Albert Corominas & Rafael Pastor - 331-357 Note on the behaviour of an improvement heuristic on permutation and blocking flow-shop scheduling
by Ramon Companys & Imma Ribas & Manel Mateo - 358-371 Optimum design selection of jigs/fixtures using digraph and matrix methods
by V. Paramasivam & K.P. Padmanaban & V. Senthil
2010, Volume 19, Issue 3/4
- 167-179 Development of Product Lifecycle Management metrics: measuring the impact of PLM
by Cynthia L. Tomovic & Lisa B. Ncube & Abram Walton & Michael Grieves - 180-190 Product Lifecycle Quality (PLQ): a framework within Product Lifecycle Management (PLM) for achieving product quality
by Michael W. Grieves - 191-210 Mechatronics Design Methodology applied at manufacturing companies
by David A. Guerra-Zubiaga & Edgar Rios & Robert Parkin & Mike Jackson & Mileta M. Tomovic & Ricardo Ramirez-Mendoza - 211-223 Multidisciplinary integrated design optimisation platform and application on active suspension
by Hao Wang & Shaoping Wang & Mileta M. Tomovic - 224-237 Integrated PLM-process-approach for the development and management of telecommunications products in a multi-lifecycle environment
by Julius D. Golovatchev & Oliver Budde & Chin-Gi Hong - 238-257 Intelligent process modelling using Feed-Forward Neural Networks
by Mohamed H. Gadallah & Khaled Abdel Hamid El-Sayed & Keith Hekman - 258-278 A survey on the integration of product and package development
by Caroline Bramklev - 279-293 The impact of Product Lifecycle Management on virtual team creation: a concept change model for heightened productivity
by Magdalena B. Lech & Tanner J. Georgiades & John E. Sukup III & Cynthia L. Tomovic - 294-305 Product Lifecycle Management in support of green manufacturing: addressing the challenges of global climate change
by L. Varinia Barreto & Hannah C. Anderson & Alyssa Anglin & Cynthia L. Tomovic - 306-311 Entry-level engineering professionals and Product Lifecycle Management: a competency model
by Sharron A. Frillman & Kari L. Wilde & Jonathan F. Kochert & Scott R. Homan & Cynthia L. Tomovic - 312-329 PLM-based certification process in aeronautics extended enterprise
by Benoit Eynard & Nadege Troussier & Bruno Carratt - 330-336 Application of PLM in higher education procurement
by Michael Wisma & Cynthia L. Tomovic
2010, Volume 19, Issue 1/2
- 6-26 Supply chain coordination using EDI with performance implications
by Craig A. Hill & Gary D. Scudder - 27-46 Evaluating the role and integration of contract manufacturing strategy in supply chain management: an empirical study
by Liang-Chieh (Victor) Cheng - 47-67 Supplier selected relationships: choosing friends, over family
by Michael D.J. Clements & David L. Dean & David A. Cohen - 68-81 Scheduling to minimise penalties for a non-dedicated supplier in integrated supply chains
by Anurag Agarwal & Vaidyanathan Jayaraman - 82-101 The role of integrative capabilities in involving suppliers in New Product Development: a knowledge integration perspective
by Sarah Jinhui Wu & Gary L. Ragatz - 102-123 A conceptual model for integrating strategic supply management into the supply chain
by Eva Ponce-Cueto & Alvaro Garcia-Sanchez & Miguel Ortega-Mier - 124-139 Real-time order management with supplier capacity reservation
by Elias T. Kirche & Rajesh Srivastava - 140-164 Analysis of two different automated purchase order systems in telecom electronics manufacturing unit
by Lauri Rantala & Olli-Pekka Hilmola
2009, Volume 18, Issue 4
- 344-355 Proposal and demonstration of V-MICS-EM by digital engineering: robot operation and maintenance by utilising visual manual
by Hirohisa Sakai & Kakuro Amasaka - 356-370 A product development process for linked management: application cases of electrical home appliance products
by Michiya Morita & Shigemi Ochiai - 371-385 Perspectives on industrial clusters in the Japanese biotechnology industry
by Nobutaka Odake - 386-395 Strategic planning of skill training for manufacturing
by Kazumasa Ohashi - 396-408 Factorial representation in scheduling problems
by Kazunori Watase - 409-426 TPS-QAS, new production quality management model: key to New JIT – Toyota's global production strategy
by Kakuro Amasaka & Hirohisa Sakai - 427-437 Model analysis of the economical meaning for regional-independent production
by Hiroki Ishikura - 438-452 Sensitivity analysis of an economic order quantity for dynamic inventory models with discrete demand
by Michinori Sakaguchi & Masanori Kodama
2009, Volume 18, Issue 3
- 245-261 Tooling design and development of set-up for hydro-mechanical deep drawing
by Swadesh Kumar Singh & D. Ravi Kumar - 262-270 A conceptual design system of epicyclic gear mechanism based on digital manufacturing
by Yang Ping & Zhihua Pei - 271-281 Design of precision recycle system of colour filter for TFT-LCD
by P.S. Pa - 282-292 A hybrid model for isomorphism identification in mechanism design based on intelligent manufacturing
by Liao Ningbo & Yang Ping - 293-299 Evaluation of the performance of bearing materials using distance-based fuzzy multi-criteria decision-making process
by S. Bhattacharya & B. Sarkar & R.N. Mukherjee - 300-307 Numerical simulation approach on stress and strain for chip scale package under thermal cycling
by Yang Ping & Wei Li - 308-318 Process control for aerospace chemical milling process
by Chau-Chen Torng & Chikong Huang & Hsien-Ming Chang - 319-332 Simultaneous optimisation of conflicting responses for CNC turned parts using desirability function
by Aman Aggarwal & Hari Singh & Pradeep Kumar & Manmohan Singh - 333-339 Finite element analysis on stress/strain in CBGA solder joint with different substrates under thermal cycle
by Yang Ping & Caijun Shen
2009, Volume 18, Issue 2
- 121-148 Size reduction decomposition for Rapid Prototyping large objects
by W.K. Chiu & K.M. Yu - 149-166 A Smart Decision-Support System for dispersed manufacturing using neural object technology
by Henry C.W. Lau & Carman K.M. Lee & George T.S. Ho & K.F. Pun & K.L. Choy - 167-182 Optimal-parting direction selection for die-casting
by Jatinder Madan & P.V.M. Rao & T.K. Kundra - 183-209 Managing knowledge within the manufacturing enterprise: an overview
by David Baxter & Rajkumar Roy & James Gao - 210-227 A JIT integrated inventory model for a buyer and a vendor considering the impact of quality improvement
by Mallika Parveen & T.V.V.L.N. Rao - 228-241 Using multiple variables decision-making analysis for ERP selection
by Jen-Her Wu & Wei-Chun Tai & Ray J. Tsai & Iuan-Yuan Lu
2009, Volume 18, Issue 1
- 1-14 A performance-based Bayesian method for the optimisation of manufacturing resources collaboration
by Jian Zhou & Qing Li & Qing Wang & Dafeng Xu & Tianyuan Xiao - 15-33 Concurrent design for nominal and tolerance analysis and allocation of mechanical assemblies using DE and NSGA-II
by K. Sivakumar & C. Balamurugan - 34-58 Production system selection for the agile manufacturing of modularly designed products
by Mohd. Asif Hasan & Ravi Shankar & Joseph Sarkis - 59-78 The effects of joint operations time means and variability unbalance on production line performance
by Sabry Shaaban & Tom McNamara - 79-93 Optimisation of finishing conditions in Centrifugal Force Assisted Abrasive Flow Machining using Taguchi method
by R.S. Walia & H.S. Shan & P. Kumar - 94-120 A multi-attribute decision model for justification of World-Class Maintenance Systems
by Rajesh Prasad Mishra & G. Anand & Rambabu Kodali
2009, Volume 17, Issue 4
- 327-336 Evaluation of tool wear mechanism of TiAlN coated tools when drilling Ti-6Al-4V
by Erween A. Rahim & Safian Sharif - 337-344 Developing and implementing statistical process control tools in a Jordanian company
by R.H. Fouad & Salman D. Al-Shobaki - 345-352 Determining optimum EDM parameters in drilling a small hole by Taguchi method
by Ahmad Razlan Yusoff & Zakri Ghazalli & Hazami Che Hussain - 353-363 Lean manufacturing concept: the main factor in improving manufacturing performance – a case study
by N. Zakuan & M.Z. Mat Saman - 364-372 Precision microfinishing by electro-chemical honing
by A.K. Dubey & H.S. Shan & N.K. Jain - 373-385 Experimental study on machining of titanium alloy (Ti64) by CVD and PVD coated carbide inserts
by S. Ramesh & L. Karunamoorthy & V.S. Senthilkumar & K. Palanikumar - 386-395 Experimental study of effect of surface roughness of blank diameter on external threads
by P.S. Chauhan & K.C. Arora - 396-407 A consensus on critical success factors for enterprise resource planning systems implementation: the experience of Malaysian firms
by S.M. Jafari & M.R. Osman & M.Y. Rosnah & S.H. Tang - 408-418 Study on rock-drilling using PDC bits for the prediction of torque and rate of penetration
by R.S. Jadoun - 419-425 Laser and arc weld methods for direct metal deposition of Waspaloy
by N.I.S. Hussein & I.R. Pashby & D.G. McCartney - 426-436 Study of out-of-roundness (OOR) of holes in ceramics by USD process using Taguchi's methodology
by R.S. Jadoun - 437-452 Cost of quality for an automotive industry: a survey and findings
by H.K. Sim & Mohamed Khaled Omar & Y.J. Kong Jackie & C.S. Bong
2009, Volume 17, Issue 3
- 216-231 Feedrate scheduling and jerk control algorithm for high-speed CNC machining
by Daping Wan & ShiLong Wang & CaiChao Zhu & Fanming Meng - 232-245 Rapid design of tool-wear condition monitoring systems for turning processes using novelty detection
by Abdulrahman F. Al-Azmi & Amin Al-Habaibeh & John Redgate - 246-260 Neural network adaptive control for machining process based on generalised entropy square error and wavelet analysis
by XingYu Lai & ChunYan Yan & BangYan Ye - 261-273 The development of a probing system for investigating friction generated acoustics
by Tristan Tyler & Eugene Lai - 274-288 Research on a new type mechanism to lock and unlock space borne appendages
by Zong Quan Deng & Bing Hui Wu & Xiang Wu & Hui Fang Zhang - 289-314 Optimal pricing and advertising competition in two supply chains with deterministic demand
by Zhongkai Xiong & Jiajia Nie - 315-326 Adaptive control for a class of non-linear systems using fuzzy logic based on motion controller
by Kai Xue & Ping Wang & Wende Zhao
2009, Volume 17, Issue 1/2
- 1-4 Reconfigurable manufacturing systems: meeting the challenges of a dynamic business paradigm
by Charu Chandra & Janis Grabis - 5-22 Configurable supply chain: framework, methodology and application
by Charu Chandra & Janis Grabis - 23-41 Structure dynamics control-based framework for adaptive reconfiguration of collaborative enterprise networks
by Dmitry A Ivanov & Boris V Sokolov & Joachim Kaeschel - 42-67 A stochastic programming approach to design the production system flexibility considering the evolution of the part families
by Tullio Tolio & Anna Valente - 68-81 A control design strategy of a reconfigurable manufacturing system
by N.H. Ben Fong & Robert H. Sturges - 82-102 Dynamic modelling of reconfigurable manufacturing planning and control systems using supervisory control
by Ahmed M. Deif & Waguih H. ElMaraghy - 103-124 A simulated annealing algorithm for dynamic system reconfiguration and production planning in cellular manufacturing
by Fantahun M. Defersha & Mingyuan Chen - 125-148 Production planning of reconfigurable manufacturing systems with stochastic demands using Tabu search
by Morteza Abbasi & Mahmoud Houshmand - 149-165 Layout configuration selection for reconfigurable manufacturing systems using the fuzzy AHP
by M. Reza Abdi - 166-183 BTO supply chain configuration via agent-based negotiation
by Alexander Smirnov & Nikolay Shilov & Alexey Kashevnik - 184-212 Developing taxonomy and model for security centric supply chain management
by Xiangyang Li & Charu Chandra & Jiun-Yan Shiau
2009, Volume 16, Issue 4
- 319-342 Creating a New Product Development capability: the organisational enablers for moving up the value chain
by Hannah Noke & Zoe Radnor - 343-360 Manufacturing bidirectional data flows in advanced collaborative CAD/CAM/CNC chains. Case study: manufacturing traceability in STEP-NC
by Julio Garrido Campos & Luis Rodriguez Miguez - 361-376 The importance of locally commanded design for the consolidation of local supply chain: the concept of design headquarters
by Mario Sergio Salerno & Roberto Marx & Mauro Zilbovicius & Ana Valeria Carneiro Dias - 377-397 A modelling approach for outsourcing decisions in Supply Chain Management
by Navin K. Dev & Sanjeev Swami & Rahul Caprihan - 398-416 Strategy for capacity management of batch constrained heat treatment operations in the manufacture of multiproduct families
by C.F. Oduoza - 417-438 An ISM approach to analyse interaction between barriers of transition to Flexible Manufacturing System
by Tilak Raj & Ravi Shankar & Mohammed Suhaib
2009, Volume 16, Issue 3
- 181-196 The role of the operational network in responsive order processing
by Gera A. Welker & Jacob Wijngaard - 197-214 Approaches to mass customisation: an empirical replication
by Daniel Vazquez-Bustelo - 215-233 Marketing, manufacturing and logistics: an empirical examination of their joint effect on company performance
by Krisztina Demeter & Krisztina Kolos - 234-249 Defining the path to value innovation
by Paul Coughlan & Mary Ann Fergus - 250-264 Packaging as AIDS for implementing Information and Communications Technologies (ICTs): adoption in the Spanish food sector
by Jesus Garcia-Arca & J. Carlos Prado-Prado - 265-282 From failure to success: an investigation into managers' criteria for assessing the outcome of IT projects
by Elmar Kutsch & Harvey Maylor - 283-299 Manufacturing competence: a key to successful supplier integration
by Robin Von Haartman & Lars Bengtsson - 300-317 Production management and Supply Chain Management in a global context
by Ralph Riedel & Egon Mueller
2009, Volume 16, Issue 1/2
- 3-21 An integrated new product introduction performance measurement system: an example in notebook computer industry
by Dongliang Daniel Sheu & P.K. Hung - 22-41 A parallel hybrid ant colony optimisation approach for job-shop scheduling problem
by Haipeng Zhang & Mitsuo Gen - 42-57 Real-time buffer management method for DBR scheduling
by Kiyun Woo & Soonyoung Park & Shigeru Fujimura - 58-75 A random key-based genetic algorithm for AGV dispatching in FMS
by Lin Lin & Mitsuo Gen - 76-100 A hybrid approach of data mining and genetic algorithms for rehabilitation scheduling
by Chen-Fu Chien & Yi-Chao Huang & Chih-Han Hu - 101-126 Modelling and scheduling preventative maintenance in semiconductor manufacturing industry with MAs
by Jie Gao & Mitsuo Gen & Linyan Sun - 127-146 Multiobjective hybrid genetic algorithm for quay crane scheduling in berth allocation planning
by Chengji Liang & Lin Lin & Jungbok Jo - 147-165 Integrated scheduling using genetic algorithm with quasi-random sequences
by Azuma Okamoto & Mitsuo Gen & Mitsumasa Sugawara - 166-175 A new solution method for joint replenishment problem
by Myungryun Yoo & Lin Lin
2008, Volume 15, Issue 3/4
- 265-283 A roadmap for cost engineering in the automotive supplier sector
by Paul Baguley & Paul G. Maropoulos & Robert Pease - 284-297 Specification management for the cost constraint optimisation in microelectronic design
by Magali Mauchand & Nicolas Perry & Alain Bernard - 298-319 Cost optimisation of tolerances and manufacturing capability for aircraft surface features
by R. Curran & M. Gilmour & A.K. Kundu & S. Raghunathan - 320-327 An industrial investigation to determine when investment in labour will be effective
by David Wilson & Shirley Coleman & Colin Herron - 328-345 Cost optimising aircraft systems at a conceptual design stage
by Oliver Houseman & Rajkumar Roy & Charles Wainwright & Evaggelos Lavdas - 376-403 Does R&D really drive competitive advantage and performance?
by Nicholas O'Regan & Martin A. Sims & Abby Ghobadian - 404-417 An initiative to implement lean manufacturing using value stream mapping in a small company
by Chandandeep Grewal
2008, Volume 15, Issue 2
- 121-152 Impact of surface roughness of diamond coatings on the cutting performance when dry machining of graphite
by Gil Cabral & P. Reis & E. Titus & J.C. Madaleno & J.P. Davim & J. Gracio & Waqar Ahmed & Mark J. Jackson - 153-186 Determination of the dampening characteristics of a tubular beam filled with vibration dampening materials
by Mark J. Jackson & Grant M. Robinson & Luke J. Hyde & William Andrasko - 187-196 Evaluation of a model for the prediction of milling stability for thin-walled components
by H. Dalton & Gerry Byrne & Michael Steinicke - 197-206 The effect of die geometry and workpiece diameter on the mechanics of Micro Form-Rolling
by Emmet Cregan & John Monaghan - 207-218 Design, manufacture and industrial validation of an electro discharge dresser for metal bond CBN wheels
by I. Pombo & J.A. Sanchez & R. Alberdi & R. Gonzalez - 219-227 Application of Taguchi method to optimise dissimilar laser welded components
by E.M. Anawa & A.G. Olabi & M.S.J. Hashmi - 228-237 Investigation on the wear process of diamond blade tools
by Y. Blake & J. Dwan & N. McClelland & Mark J. Jackson - 238-245 Mechanical stresses in the multilayered T-branch hydroforming: numerical simulation
by M.D. Islam & A.G. Olabi & M.S.J. Hashmi - 246-252 Design of a capillary viscometer with numerical and computational methods
by Ali Shah & Dermot Brabazon & Lisa Looney - 253-263 An investigation of aerosol particle number and size generated during a drilling process with surface coated tools
by Rodney G. Handy & Mark J. Jackson & Monica Rodriguez & David Goodman & Grant Robinson & Michael Lafreniere
2008, Volume 15, Issue 1
- 1-11 A new mathematical model for a distribution network problem in a multi-product supply chain system: a real-case study
by M. Rabbani & R. Tavakkoli-Moghaddam & H. Parsa - 12-27 The impact of process maturity and uncertainty on supply chain performance: an empirical study
by Archie Lockamy III & Paul Childerhouse & Stephen M. Disney & Denis R. Towill & Kevin McCormack - 28-44 Critical success factors in managing global supply chains
by Felix T.S. Chan & H.K. Chan & Henry C.W. Lau & Ralph W.L. Ip - 45-63 Simulation of Automatic Guided Vehicle systems in manufacturing environment. Case: Volvo's Crankshaft Unit in Skovde
by Sandor Ujvari & Olli-Pekka Hilmola - 64-83 Optimisation of distribution networks using Genetic Algorithms. Part 1 – problem modelling and automatic generation of solutions
by Romeo M. Marian & Lee H.S. Luong & Raknoi Akararungruangkul - 84-101 Optimisation of distribution networks using Genetic Algorithms. Part 2 – the Genetic Algorithm and Genetic Operators
by Romeo M. Marian & Lee H.S. Luong & Raknoi Akararungruangkul - 102-118 Relationship characteristics within the supply chain of Small and Medium-Sized Construction Enterprises in Thailand
by Prasanta Kumar Dey & William Ho & Chotchai Charoenngam & Watcharapong Deewong
2008, Volume 14, Issue 3/4
- 249-265 Modular and collaborative automation: achieving manufacturing flexibility and reconfigurability
by Armando W. Colombo & Robert Harrison - 266-288 A robust scheduling rule using a Neural Network in dynamically changing job-shop environments
by Toru Eguchi & Fuminori Oba & Satoru Toyooka - 289-298 Six Sigma methodology: an effective tool for quality management
by Francesco Aggogeri & Enzo Gentili - 299-310 Supply chain management for virtual enterprises with adaptive multi-agent mechanism
by Toshiya Kaihara & Susumu Fujii - 311-325 Capacitating ERP through mathematical programming: a case study
by Rosana B.B. Haddad & Marcius F.H. De Carvalho - 326-341 Study of the EDM process effects on aluminium alloys
by L. Iuliano & M.G. Violante & A. Gatto & E. Bassoli - 342-358 A conceptual model and an information tool for the establishment of production networks based on small and smallest enterprises
by Matthias Zimmermann & Lars Zschorn & Joachim Kaschel & Tobias Teich - 359-378 A study on integration of process planning and scheduling system for holonic manufacturing with modification of process plans
by Rajesh Shrestha & Toshihiro Takemoto & Koji Ichinose & Nobuhiro Sugimura - 379-395 A hybrid-approach to model design and development processes and the evaluation of innovation opportunities
by Francesca Montagna & Maria Franca Norese - 396-409 Improvement through process integration using a simulative, dynamic method
by Marco Mazzola & Enzo Gentili & Francesco Aggogeri - 410-430 An assessment of recent developments in the finite element software for modelling manufacturing processes
by M.A. Sheikh - 431-447 Rapid renovation of operational capabilities by ERP implementation: lessons from four Chinese manufacturers
by Xiaofeng Ma & Marcel Dissel - 448-460 Optimisation of cutting conditions in hard turning using ceramic-coated and uncoated PCBN cutting tools
by Ty G. Dawson & Thomas R. Kurfess - 461-474 Manufacturing facilities layout design using Genetic Algorithm
by Kulendran Balamurugan & Velappan Selladurai & Balamurugan Ilamathi
2008, Volume 14, Issue 1/2
- 2-16 The development of desktop e-manufacturing system
by Ren C. Luo & Jyh Hwa Tzou - 17-34 Collaborative manufacturing process planning for distributed integration in tooling industry
by X.G. Ming & J.Q. Yan & X.H. Wang & W.F. Lu & Q.J. Peng - 35-51 Study on Manufacturing Grid and its executing platform
by F. Tao & Y.F. Hu & Z.D. Zhou - 52-65 The role of paper-nip interactions on electrostatic toner transfer forces in Xerographic printing
by Tao Wu & Chaohui Tong & Nikolas Provatas - 66-83 Design of an agent-based distant and distributed manufacturing control system
by Kung-Jeng Wang - 84-99 Finite Element analysis of aluminum tube hydroforming based on non-quadratic yield function
by Farhang Pourboghrat & Yabo Guan & Frederic Barlat - 100-109 Process simulation during the isothermal extrusion of Ti–6.0Al–2.0Zr–1.0Mo–1.0V alloy by 3D FEM
by Miaoquan Li & Li Long - 110-117 Topological expression mode approach of Satellite Gear Mechanism for intelligent CAD
by Yang Ping - 118-129 Lightweight automotive doors design including material and manufacturing process selection
by Shuxin Wang & Xintao Cui & Lianhong Zhang - 130-144 Analysing inspection frequency for wafer bumping process and an empirical study of UNISON decision framework
by Chen-Fu Chien & Chih-Han Hu & Chi-Yung Lin - 145-173 Geometric algorithms for manufacturing of freeform multi-material objects using reconfigurable tools
by Bahattin Koc & S. Pandi Gurusamy - 174-188 Computer-aided CMM modular fixture configuration design
by M. Shokri & B. Arezoo - 189-200 Application of wavelet analysis to BIW assembly quality evaluation
by Zhu Ping & Wang Hua & Chen Guanlong - 201-214 Study on PLM-oriented Product Lifecycle Genetic Model
by Kezheng Huang & Jinyong Yang & Huaiwei Ren - 215-227 Logical interaction between domain knowledge and human cognition in design
by A.M.M. Sharif Ullah - 228-245 A robust process optimisation for fused deposition modelling
by Y. Ravi Kumar & C.S.P. Rao & T.A. Janardhan Reddy
2008, Volume 13, Issue 2/3/4
- 114-123 Study on normal grinding force in ultrasonic aided grinding of sintered Nd-Fe-B permanent magnet
by J.H. Zhang & S.F. Ren & Y.J. Hu & L. Li & M.G. Xu - 124-145 Micromachining of bipolar plates used in proton exchange membrane fuel cells
by Mark J. Jackson & Grant M. Robinson & Mike P. Brady - 146-168 Analytical prediction of stability lobes in high-speed milling and their application to micromilling
by L. Samrajya Lakshmi & V. Vasu & Prasad Krishna & B. Nageswara Rao & S. Rakesh - 169-186 Soft-pad grinding of 300 mm wire-sawn silicon wafers: finite element analysis with designed experiments
by Jian (Jessie) Wu & Xuekun Sun & Z.J. Pei & X. Jack Xin & Kelli Simmelink - 187-200 Fabrication and characterisation of nitrogen-doped diamond microtools
by Mark J. Jackson - 201-213 Analysis of heat affected zone in the micro-electric discharge machining
by Olivier Thao & Suhas S. Joshi - 214-225 Experimental investigation into electrochemical discharge microdrilling on advanced ceramics
by B.R. Sarkar & B. Doloi & B. Bhattacharyya - 226-240 Study of WEDM parameter phenomena for microfabrication
by Sadiq M. Alam & Mustafizur Rahman & H.S. Lim - 241-253 Microgroove pattern machined by excimer laser dragging
by Hong Hocheng & Kuan-Yu Wang - 254-264 Analysis of edge effects on flexible forming of sheet metal using plasma arc
by Wenbin Wu & Wenji Xu & Zhongying Wang & Jinjin Zhou - 265-279 Influence of process parameters on joining strength in microplasma arc welding
by Kueng-Hueng Tseng & Min Jou & Yun Chang & Her-Yueh Huang - 280-296 Determination of thermal stress distribution in metallic layer during selective laser sintering using finite element method
by Patil Makarand Ramu & Vinod Yadava - 297-307 Bulk micromachining for SOI based microsystems using double side XeF 2 etching
by Avinash K. Bhaskar & Muthukumaran Packirisamy & Rama B. Bhat - 308-323 Parametric analysis of magnetorheological abrasive flow finishing process
by Sunil Jha & Vijay Kumar Jain - 324-343 Principle and applications of MEMS: a review
by N.P. Mahalik - 344-359 Review of MEMS metrology solutions
by James F. Nichols & Meghan Shilling & Thomas R. Kurfess - 360-375 Carbon as a MEMS material: micro and nanofabrication of pyrolysed photoresist carbon
by Chunlei Wang & Rabih Zaouk & Benjamin Y. Park & Marc J. Madou
2008, Volume 13, Issue 1
- 4-29 Manufacturing planning and control technology versus operational performance: an empirical study of MRP and JIT in China
by Zhixiang Chen & Jennifer S. Shang - 30-54 Modelling information sharing to improve just-in-time purchasing vendor evaluation
by James T. Ding & Rohana J. Karunamuni - 55-77 The cross-functional coordination between operations, marketing, purchasing and engineering and the impact on performance
by Amelia S. Carr & Hale Kaynak & Senthilkumar Muthusamy - 78-94 Coordinating pricing and inventory decisions under reference price effects
by Timothy L. Urban - 95-110 AI-based project risk management process for a kind of manufacturing alliance
by Hongyi Cao
2007, Volume 12, Issue 4
- 314-326 The effect of margin guarantees on pricing and production
by Timothy L. Urban