Contact information of Elsevier
Serial Information
Download restrictions: Full text for ScienceDirect subscribers only
Editor: Roman Slowinski
Editor: Roman Slowinski
Editor: Roman Slowinski
Editor: Roman Slowinski
Editor: Roman Slowinski
Series handle: RePEc:eee:ejores
ISSN: 0377-2217
Citations RSS feed: at CitEc
Impact factors
Access and download statisticsTop item:
Corrections
All material on this site has been provided by the respective publishers and authors. You can help
correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:ejores. See general information about how to correct material in RePEc.
For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/eor .
Content
April 2006, Volume 170, Issue 1
March 2006, Volume 169, Issue 3
- 699-711 Flowshop scheduling research after five decades
by Gupta, Jatinder N.D. & Stafford, Edward Jr.
- 712-722 A new sufficient condition of optimality for the two-machine flowshop problem
by Briand, Cyril & La, H. Trung & Erschler, Jacques
- 723-741 Applying machine based decomposition in 2-machine flow shops
by Mukherjee, Saral & Chatterjee, A.K.
- 742-750 A heuristic for minimizing the expected makespan in two-machine flow shops with consistent coefficients of variation
by Kalczynski, Pawel Jan & Kamburowski, Jerzy
- 751-760 Johnson's problem with stochastic processing times and optimal service level
by Portougal, Victor & Trietsch, Dan
- 761-766 The minmax regret permutation flow-shop problem with two jobs
by Averbakh, Igor
- 767-780 A branch-and-bound algorithm for three-machine flowshop scheduling problem to minimize total completion time with separate setup times
by Allahverdi, Ali & Al-Anzi, Fawaz S.
- 781-800 A genetic algorithm for hybrid flowshops with sequence dependent setup times and machine eligibility
by Ruiz, Ruben & Maroto, Concepcion
- 801-815 Improvement heuristic for the flow-shop scheduling problem: An adaptive-learning approach
by Agarwal, Anurag & Colak, Selcuk & Eryarsoy, Enes
- 816-854 A review of TSP based approaches for flowshop scheduling
by Bagchi, Tapan P. & Gupta, Jatinder N.D. & Sriskandarajah, Chelliah
- 855-864 Complexity of flowshop scheduling problems with a new blocking constraint
by Martinez, S. & Dauzere-Peres, S. & Gueret, C. & Mati, Y. & Sauer, N.
- 865-872 Performance guarantees for flowshop heuristics to minimize makespan
by Gupta, Jatinder N.D. & Koulamas, Christos & Kyparisis, George J.
- 873-874 Metaheuristics in multiple objective optimization
by Jaszkiewicz, Andrzej & Tuyttens, Daniel
- 875-897 The influence of the fitness evaluation method on the performance of multiobjective search algorithms
by Burke, E.K. & Landa Silva, J.D.
- 898-917 The application and effectiveness of a multi-objective metaheuristic algorithm for partial classification
by de la Iglesia, B. & Richards, G. & Philpott, M.S. & Rayward-Smith, V.J.
- 918-931 Multi-objective tabu search using a multinomial probability mass function
by Kulturel-Konak, Sadan & Smith, Alice E. & Norman, Bryan A.
- 932-942 An efficient, adaptive parameter variation scheme for metaheuristics based on the epsilon-constraint method
by Laumanns, Marco & Thiele, Lothar & Zitzler, Eckart
- 943-959 A study of stochastic local search algorithms for the biobjective QAP with correlated flow matrices
by Paquete, Luis & Stutzle, Thomas
- 960-977 Evolutionary bi-objective optimisation in the elevator car routing problem
by Tyni, Tapio & Ylinen, Jari
- 978-993 A dynamic neighborhood based tabu search algorithm for real-world flight instructor scheduling problems
by Xu, Jiefeng & Sohoni, Milind & McCleery, Mike & Bailey, T. Glenn
- 994-995 Supply chain issues and opportunities
by Meskens, Nadine & Riane, Fouad
- 996-1009 Implications of personalization offers on demand and supply network design: A case from the golf club industry
by Poulin, Marc & Montreuil, Benoit & Martel, Alain
- 1010-1029 A methodology for modeling inter-company supply chains and for evaluating a method of integrated product and process documentation
by Roder, Axel & Tibken, Bernd
- 1030-1047 An optimization model for selecting a product family and designing its supply chain
by Lamothe, Jacques & Hadj-Hamou, Khaled & Aldanondo, Michel
- 1048-1063 Modeling inventory routing problems in supply chains of high consumption products
by Aghezzaf, El-Houssaine & Raa, Birger & Van Landeghem, Hendrik
- 1064-1076 Object-oriented dynamic supply-chain modelling incorporated with production scheduling
by Hung, Wing Yan & Samsatli, Nouri J. & Shah, Nilay
- 1077-1078 Feature Cluster "Advances in Continuous Optimization"
by Karasozen, Bulent & Pinar, Mustafa C. & Terlaky, Tamas & Weber, Gerhard-Wilhelm
- 1079-1095 Analyzing linear systems containing strict inequalities via evenly convex hulls
by Goberna, Miguel A. & Rodri'guez, Margarita M.L.
- 1096-1107 Huber approximation for the non-linear l1 problem
by Pinar, Mustafa C. & Hartmann, Wolfgang M.
- 1108-1127 Equilibrium constrained optimization problems
by Birbil, S.I. & Bouza, G. & Frenk, J.B.G. & Still, G.
- 1128-1147 Control and optimal response problems for quasilinear impulsive integrodifferential equations
by Akhmet, M.U. & Kirane, M. & Tleubergenova, M.A. & Weber, G.W.
- 1148-1157 On the optimal parameter of a self-concordant barrier over a symmetric cone
by Cardoso, Domingos Moreira & Vieira, Luis Almeida
- 1158-1175 Sensitivity analysis in linear optimization: Invariant support set intervals
by Hadigheh, Alireza Ghaffari & Terlaky, Tamas
- 1176-1184 A numerical study of some modified differential evolution algorithms
by Kaelo, P. & Ali, M.M.
- 1185-1206 A modified standard embedding with jumps in nonlinear optimization
by Guddat, Jurgen & Vazquez, Francisco Guerra & Nowack, Dieter & Ruckmann, Jan-J.
- 1207-1221 Semidefinite descriptions of cones defining spectral mask constraints
by Faybusovich, L.
March 2006, Volume 169, Issue 2
- 351-358 Scatter Search--Wellsprings and Challenges
by Marti, Rafael
- 359-372 Principles of scatter search
by Marti, Rafael & Laguna, Manuel & Glover, Fred
- 373-391 A scatter search method for bi-criteria {0, 1}-knapsack problems
by Gomes da Silva, Carlos & Climaco, Joao & Figueira, Jose
- 392-412 Scatter Search in software testing, comparison and collaboration with Estimation of Distribution Algorithms
by Sagarna, Ramon & Lozano, Jose A.
- 413-425 Combining path relinking and genetic algorithms for the multiple-level warehouse layout problem
by Zhang, G.Q. & Lai, K.K.
- 426-449 "MOSS" multiobjective scatter search applied to non-linear multiple criteria optimization
by Beausoleil, Ricardo P.
- 450-476 Continuous scatter search: An analysis of the integration of some combination methods and improvement strategies
by Herrera, F. & Lozano, M. & Molina, D.
- 477-489 Solving feature subset selection problem by a Parallel Scatter Search
by Garci'a Lopez, Felix & Garci'a Torres, Miguel & Melian Batista, Belen & Moreno Perez, Jose A. & Moreno-Vega, J. Marcos
- 490-507 An empirical investigation on parallelization strategies for Scatter Search
by Adenso-Diaz, Belarmino & Garcia-Carbajal, Santiago & Lozano, Sebastian
- 508-519 Path relinking and GRG for artificial neural networks
by El-Fallahi, Abdellah & Marti, Rafael & Lasdon, Leon
- 520-532 Scatter search with path relinking for phylogenetic inference
by Cotta, Carlos
- 533-547 A scatter search heuristic for the capacitated clustering problem
by Scheuerer, Stephan & Wendolsky, Rolf
- 548-569 A path relinking approach with ejection chains for the generalized assignment problem
by Yagiura, Mutsunori & Ibaraki, Toshihide & Glover, Fred
- 570-585 Hybrid scatter search and path relinking for the capacitated p-median problem
by Diaz, Juan A. & Fernandez, Elena
- 586-605 A Scatter Search for the periodic capacitated arc routing problem
by Chu, Feng & Labadi, Nacima & Prins, Christian
- 606-622 Scatter search for the vehicle routing problem with time windows
by Russell, Robert A. & Chiang, Wen-Chyuan
- 623-637 Scatter search for project scheduling with resource availability cost
by Yamashita, Denise Sato & Armentano, Vinicius Amaral & Laguna, Manuel
- 638-653 A hybrid scatter search/electromagnetism meta-heuristic for project scheduling
by Debels, Dieter & De Reyck, Bert & Leus, Roel & Vanhoucke, Mario
- 654-666 Some aspects of scatter search in the flow-shop problem
by Nowicki, Eugeniusz & Smutnicki, Czeslaw
- 667-676 A dynamic programming approach to price installment options
by Ben-Ameur, Hatem & Breton, Michele & Francois, Pascal
- 677-697 Bankruptcy theory development and classification via genetic programming
by Lensberg, Terje & Eilifsen, Aasmund & McKee, Thomas E.
February 2006, Volume 169, Issue 1
- 1-29 Analytic hierarchy process: An overview of applications
by Vaidya, Omkarprasad S. & Kumar, Sushil
- 30-40 Generating optimal multi-segment cutting patterns for circular blanks in the manufacturing of electric motors
by Cui, Yaodong
- 41-52 On the Hierarchical Chinese Postman Problem with linear ordered classes
by Korteweg, Peter & Volgenant, Ton
- 53-64 The average shadow price for MILPs with integral resource availability and its relationship to the marginal unit shadow price
by Mukherjee, Saral & Chatterjee, A.K.
- 65-80 Fuzzy mixture inventory model involving fuzzy random variable lead time demand and fuzzy total demand
by Chang, Hung-Chi & Yao, Jing-Shing & Ouyang, Liang-Yuh
- 81-96 The newsboy problem with resalable returns: A single period model and case study
by Mostard, Julien & Teunter, Ruud
- 97-110 Capacitated plant selection in a decentralized manufacturing environment: A bilevel optimization approach
by Cao, Dong & Chen, Mingyuan
- 111-132 Optimal and near-optimal policies for lost sales inventory models with at most one replenishment order outstanding
by Hill, Roger M. & Johansen, Soren Glud
- 133-145 Optimization of multiple responses considering both location and dispersion effects
by Kim, Kwang-Jae & Lin, Dennis K.J.
- 146-156 Classification trees: A possible method for maternity risk grouping
by Harper, Paul R. & Winslett, David J.
- 157-177 A Bayesian paired comparison approach for relative accident probability assessment with covariate information
by Szwed, P. & Dorp, J. Rene van & Merrick, J.R.W. & Mazzuchi, T.A. & Singh, A.
- 178-188 A multiple warm standby system with operational and repair times following phase-type distributions
by Perez-Ocon, Rafael & Montoro-Cazorla, Delia
- 189-201 Random fuzzy renewal process
by Zhao, Ruiqing & Tang, Wansheng & Yun, Huaili
- 202-225 Analysis of R out of N systems with several repairmen, exponential life times and phase type repair times: An algorithmic approach
by Barron, Yonit & Frostig, Esther & Levikson, Benny
- 226-246 Dynamic decision making without expected utility: An operational approach
by Nielsen, Thomas D. & Jaffray, Jean-Yves
- 247-272 DEA-Discriminant Analysis: Methodological comparison among eight discriminant analysis approaches
by Sueyoshi, Toshiyuki
- 273-285 User acceptance of multi-criteria decision support systems: The impact of preference elicitation techniques
by Aloysius, John A. & Davis, Fred D. & Wilson, Darryl D. & Ross Taylor, A. & Kottemann, Jeffrey E.
- 286-309 Sequential valuation networks for asymmetric decision problems
by Demirer, Riza & Shenoy, Prakash P.
- 310-328 Dynamic programming approach to discrete time dynamic feedback Stackelberg games with independent and dependent followers
by Nie, Pu-yan & Chen, Li-hua & Fukushima, Masao
- 329-331 Comments on operational competitiveness rating analysis (OCRA)
by Wang, Shouhong
- 332-337 On OCRA: Response to comments by Wang (2004)
by Parkan, Celik
- 338-339 An addendum on sensitivity analysis of the optimal assignment
by Volgenant, A.
- 340-350 Sensitivity analysis of a greedy heuristic for knapsack problems
by Ghosh, Diptesh & Chakravarti, Nilotpal & Sierksma, Gerard
February 2006, Volume 168, Issue 3
- 663-665 Balancing Assembly and Transfer Lines
by Dolgui, Alexandre
- 666-693 State-of-the-art exact and heuristic solution procedures for simple assembly line balancing
by Scholl, Armin & Becker, Christian
- 694-715 A survey on problems and methods in generalized assembly line balancing
by Becker, Christian & Scholl, Armin
- 716-731 An linear programming based lower bound for the simple assembly line balancing problem
by Peeters, Marc & Degraeve, Zeger
- 732-746 A special case of transfer lines balancing by graph approach
by Dolgui, Alexandre & Guschinsky, Nikolai & Levin, Genrikh
- 747-770 Cost-oriented assembly line balancing: Model formulations, solution difficulty, upper and lower bounds
by Amen, Matthias
- 771-782 An optimal piecewise-linear program for the U-line balancing problem with stochastic task times
by Urban, Timothy L. & Chiang, Wen-Chyuan
- 783-797 Stability analysis of an optimal balance for an assembly line with fixed cycle time
by Sotskov, Yuri N. & Dolgui, Alexandre & Portmann, Marie-Claude
- 798-810 A heuristic solution for fuzzy mixed-model line balancing problem
by Hop, Nguyen Van
- 811-825 A genetic algorithm for robotic assembly line balancing
by Levitin, Gregory & Rubinovitz, Jacob & Shnits, Boris
- 826-837 Balancing assembly lines with tabu search
by Lapierre, Sophie D. & Ruiz, Angel & Soriano, Patrick
- 838-852 An endosymbiotic evolutionary algorithm for the integration of balancing and sequencing in mixed-model U-lines
by Kim, Yeo Keun & Kim, Jae Yun & Kim, Yeongho
- 853-869 Dynamic task assignment for throughput maximization with worksharing
by Askin, Ronald G. & Chen, Jiaqiong
- 870-879 Bucket brigades on in-tree assembly networks
by Bartholdi III, John J. & Eisenstein, Donald D. & Lim, Yun Fong
- 880-904 Controlling mixed-model assembly lines in real-time by using distributed systems
by Bock, Stefan & Rosenberg, Otto & Brackel, Thomas van
- 905-921 Sequencing and loading of products on a flowline
by Sarin, Subhash C. & Greco, Michael P. & Dar-El, Ezey M.
- 922-931 Optimal allocation of work in assembly lines for lots with homogenous learning
by Cohen, Yuval & Vitner, Gad & Sarin, Subhash C.
- 932-951 Generation of assembly graphs by systematic analysis of assembly structures
by Lambert, Alfred J.D.
- 952-966 Three-dimensional packing of items with limited load bearing strength
by Bischoff, E.E.
- 967-984 Cutting plane method for multiple objective stochastic integer linear programming
by Abbas, Moncef & Bellahcene, Fatima
- 985-997 Flexible flow shop scheduling with uniform parallel machines
by Kyparisis, George J. & Koulamas, Christos
- 998-1008 A tandem clustering process for multimodal datasets
by Cho, Catherine & Kim, Sooyoung & Lee, Jaewook & Lee, Dae-Won
- 1009-1018 Knowledge discovery using a neural network simultaneous optimization algorithm on a real world classification problem
by Sexton, Randall S. & McMurtrey, Shannon & Cleavenger, Dean
- 1019-1029 Characterizing solutions of rough programming problems
by Youness, Ebrahim A.
- 1030-1039 Branch-and-bound algorithms for solving hard instances of the one-machine sequencing problem
by Pan, Yunpeng & Shi, Leyuan
January 2006, Volume 168, Issue 2
- 279-280 Mathematical Finance and Risk Assessment
by Dohi, Tadashi & Osaki, Shunji & Nikolaos Limnios
- 281-290 Price limits and capital requirements of futures clearinghouses
by Shanker, Latha & Balakrishnan, Narayanaswamy
- 291-300 The comparative statics on asset prices based on bull and bear market measure
by Ohnishi, Masamitsu & Osaki, Yusuke
- 301-310 Monte Carlo analysis of convertible bonds with reset clauses
by Kimura, Toshikazu & Shinohara, Toshio
- 311-321 An impulse control of a geometric Brownian motion with quadratic costs
by Ohnishi, Masamitsu & Tsujimura, Motoh
- 322-332 Bounds for the price of a European-style Asian option in a binary tree model
by Reynaerts, Huguette & Vanmaele, Michele & Dhaene, Jan & Deelstra, Griselda
- 333-339 Some results on symmetric duality of multiobjective programmes with generalized (F,[rho]) invexity
by Ojha, D.B. & Mukherjee, R.N.
- 340-344 A linear programming framework for free disposal hull technologies and cost functions: Primal and dual models
by Leleu, Herve
- 345-353 Posynomial geometric programming with parametric uncertainty
by Liu, Shiang-Tai
- 354-369 An evolutionary programming algorithm for continuous global optimization
by Yang, Yao Wen & Xu, Jian Feng & Soh, Chee Kiong
- 370-389 Scheduling orders for multiple product types with due date related objectives
by Leung, Joseph Y.-T. & Li, Haibing & Pinedo, Michael
- 390-402 Using tree search bounds to enhance a genetic algorithm approach to two rectangle packing problems
by Dowsland, Kathryn A. & Herbert, Edward A. & Kendall, Graham & Burke, Edmund
- 403-424 On solving multi-type railway line planning problems
by Goossens, Jan-Willem & van Hoesel, Stan & Kroon, Leo
- 425-449 One-sided elasticities and technical efficiency in multi-output production: A theoretical framework
by Hadjicostas, Petros & Soteriou, Andreas C.
- 450-462 Allocative efficiency of technically inefficient production units
by Bogetoft, Peter & Fare, Rolf & Obel, Borge
- 463-474 An inventory model for deteriorating items with stock-dependent consumption rate and shortages under inflation and time discounting
by Hou, Kuo-Lung
- 475-491 The application of prediction capability and adaptive target control to the newspaper business
by Pearson, Michael
- 492-508 Cost analysis on renewable full-service warranties for multi-component systems
by Bai, Jun & Pham, Hoang
- 509-519 Dynamic load balancing in parallel queueing systems: Stability and optimal control
by Down, Douglas G. & Lewis, Mark E.
- 520-540 Quantile and tolerance-interval estimation in simulation
by Chen, E. Jack & Kelton, W. David
- 541-556 A [delta]-shock maintenance model for a deteriorating system
by Tang, Ya-yong & Lam, Yeh
- 557-570 Rank from comparisons and from ratings in the analytic hierarchy/network processes
by Saaty, Thomas L.
- 571-583 A rational approach to handling fuzzy perceptions in route choice
by Arslan, Turan & Khisty, Jotin
- 584-592 Nonessential objectives within network approaches for MCDM
by Gal, Tomas & Hanne, Thomas
- 593-611 Establish standards of standard costing with the application of convergent gray zone test
by Hsiao, Tzy-yih
- 612-632 An efficient linear model and optimisation algorithm for multi-site combined heat and power production
by Rong, Aiying & Hakonen, Henri & Lahdelma, Risto
- 633-644 Passenger grouping under constant threat probability in an airport security system
by Lazar Babu, Vellara L. & Batta, Rajan & Lin, Li
- 645-654 The impact of energy function structure on solving generalized assignment problem using Hopfield neural network
by Monfared, M.A.S. & Etemadi, M.
January 2006, Volume 168, Issue 1
- 1-16 Single item lot sizing problems
by Brahimi, Nadjib & Dauzere-Peres, Stephane & Najid, Najib M. & Nordli, Atle
- 17-34 Integration of pricing and capacity allocation for perishable products
by Feng, Youyi & Xiao, Baichun
- 35-50 The relationship between organization strategy, total quality management (TQM), and organization performance--the mediating role of TQM
by Prajogo, Daniel I. & Sohal, Amrik S.
- 51-64 Retailer's optimal pricing and lot-sizing policies for deteriorating items with partial backlogging
by Chang, Horng-Jinh & Teng, Jinn-Tsair & Ouyang, Liang-Yuh & Dye, Chung-Yuan
- 65-85 Coordination of cooperative advertising in a two-level supply chain when manufacturer offers discount
by Yue, Jinfeng & Austin, Jill & Wang, Min-Chiang & Huang, Zhimin
- 86-99 Optimal preventive maintenance of a production system with an intermediate buffer
by Kyriakidis, E.G. & Dimitrakos, T.D.
- 100-121 A geometric process model for M/M/1 queueing system with a repairable service station
by Lam, Yeh & Zhang, Yuan Lin & Liu, Qun
- 122-142 Joint statistical design of double sampling and s charts
by He, David & Grigoryan, Arsen
- 143-152 A flexible stochastic differential equation model in distributed development environment
by Tamura, Yoshinobu & Yamada, Shigeru
- 153-163 A two threshold vacation policy in multiserver queueing systems
by Tian, Naishuo & Zhang, Zhe George
- 164-180 Knowledge acquisition in incomplete information systems: A rough set approach
by Leung, Yee & Wu, Wei-Zhi & Zhang, Wen-Xiu
- 181-199 Mathematical programming based heuristics for improving LP-generated classifiers for the multiclass supervised classification problem
by Adem, Jan & Gochet, Willy
- 200-220 Heuristics for selecting robust database structures with dynamic query patterns
by Chen, Andrew N.K. & Goes, Paulo B. & Gupta, Alok & Marsden, James R.
- 221-239 A game-theoretic formulation of joint implementation of environmental projects
by Breton, Michele & Zaccour, Georges & Zahaf, Mehdi
- 240-252 How real option disinvestment flexibility augments project NPV
by Keswani, Aneel & Shackleton, Mark B.
- 253-268 Do bank mergers have hidden or foregone value? Realized and unrealized operating synergies in one bank merger
by Sherman, H. David & Rupert, Timothy J.
December 2005, Volume 167, Issue 3
- 589-591 Multicriteria scheduling
by T'kindt, Vincent & Billaut, Jean-Charles
- 592-623 Multicriteria scheduling
by Hoogeveen, Han
- 624-643 A new bounding mechanism for the CNC machine scheduling problems with controllable processing times
by Kayan, Rabia K. & Akturk, M. Selim
- 644-662 Decentralised, multi-objective driven scheduling for reentrant shops: A conceptual development and a test case
by Miragliotta, Giovanni & Perona, Marco
- 663-678 A multiobjective evolutionary algorithm for scheduling and inspection planning in software development projects
by Hanne, Thomas & Nickel, Stefan
- 679-695 Generating efficient schedules for identical parallel machines involving flow-time and tardy jobs
by Gupta, J.N.D. & Ruiz-Torres, Alex J.
- 696-716 A Multi-Objective Genetic Algorithm for mixed-model sequencing on JIT assembly lines
by Mansouri, S. Afshin
- 717-738 Genetic local search for multi-objective flowshop scheduling problems
by Arroyo, Jose Elias Claudio & Armentano, Vinicius Amaral
- 739-751 Punctuality and idleness in just-in-time scheduling
by Sourd, Francis
- 752-771 Bicriteria train scheduling for high-speed passenger railroad planning applications
by Zhou, Xuesong & Zhong, Ming
- 772-795 A multi-objective simulated-annealing algorithm for scheduling in flowshops to minimize the makespan and total flowtime of jobs
by Varadharajan, T.K. & Rajendran, Chandrasekharan
- 796-809 Two-machine shop scheduling: Compromise between flexibility and makespan value
by Esswein, Carl & Billaut, Jean-Charles & Strusevich, Vitaly A.
December 2005, Volume 167, Issue 2
- 283-296 A comparison of branch-and-bound algorithms for a family scheduling problem with identical parallel machines
by Dunstall, Simon & Wirth, Andrew
- 297-319 Approximation schemes for job shop scheduling problems with controllable processing times
by Jansen, Klaus & Mastrolilli, Monaldo & Solis-Oba, Roberto
- 320-335 Dynamic transport scheduling under multiple resource constraints
by Ebben, M. J. R. & van der Heijden, M. C. & van Harten, A.
- 336-348 Modeling the reentrant job shop scheduling problem with setups for metaheuristic searches
by Zoghby, Jeriad & Wesley Barnes, J. & Hasenbein, John J.
- 349-369 Optimal management of cross-trained workers in services with negligible switching costs
by Berman, Oded & Wang, Jiamin & Sapna, K. P.
- 370-380 Cooperation between multiple news-vendors with transshipments
by Slikker, Marco & Fransoo, Jan & Wouters, Marc
- 381-397 An interactive method for inventory control with fuzzy lead-time and dynamic demand
by Dey, Jayanta Kumar & Kar, Samarjit & Maiti, Manoranjan
- 398-412 Environmental considerations on the optimal product mix
by Letmathe, Peter & Balakrishnan, Nagraj
- 413-426 Dynamic, customer-oriented improvement of supply networks
by Jammernegg, Werner & Kischka, Peter
- 427-443 A characterization of concordance relations
by Bouyssou, Denis & Pirlot, Marc
- 444-460 Solving influence diagrams with fuzzy chance and value nodes
by Rodriguez-Muniz, Luis J. & Lopez-Diaz, Miguel & Gil, Maria Angeles
- 461-474 On policy capturing with fuzzy measures
by Liginlal, Divakaran & Ow, Terence T.
- 475-492 Playing for time: A sequential inspection game
by Avenhaus, Rudolf & Canty, Morton John
- 493-517 A novel technique of object ranking and classification under ignorance: An application to the corporate failure risk problem
by Beynon, Malcolm J.
- 518-542 Forecasting business profitability by using classification techniques: A comparative analysis based on a Spanish case
by de Andres, Javier & Landajo, Manuel & Lorca, Pedro
- 543-549 A Lorenz-Pareto measure of pure diversification
by Troutt, Marvin D. & Acar, William
- 550-573 Dynamic optimization of the operation of single-car elevator systems with destination hall call registration: Part I. Formulation and simulations
by Tanaka, Shunji & Uraguchi, Yukihiro & Araki, Mituhiko
- 574-587 Dynamic optimization of the operation of single-car elevator systems with destination hall call registration: Part II. The solution algorithm
by Tanaka, Shunji & Uraguchi, Yukihiro & Araki, Mituhiko
November 2005, Volume 167, Issue 1
- 1-19 A fresh view on the tolerance approach to sensitivity analysis in linear programming
by Filippi, Carlo
- 20-27 Phase I cycling under the most-obtuse-angle pivot rule
by Guerrero-Garcia, Pablo & Santos-Palomo, Angel
- 28-34 Non-differentiable higher-order symmetric duality in mathematical programming with generalized invexity
by Mishra, S. K.
- 35-47 Beam search heuristic to solve stochastic integer problems under probabilistic constraints
by Beraldi, Patrizia & Ruszczynski, Andrzej
- 48-67 Improved local search algorithms for the rectangle packing problem with general spatial costs
by Imahori, S. & Yagiura, M. & Ibaraki, T.
- 68-76 Data dependent worst case bounds for weighted set packing
by Kwon, Roy H.
- 77-95 A hybrid genetic algorithm for the job shop scheduling problem
by Goncalves, Jose Fernando & de Magalhaes Mendes, Jorge Jose & Resende, Mauricio G. C.
- 96-115 A stochastic programming approach for supply chain network design under uncertainty
by Santoso, Tjendera & Ahmed, Shabbir & Goetschalckx, Marc & Shapiro, Alexander
- 116-128 Cooperative flow dynamics in production lines with buffer level dependent production rates
by Filliger, R. & Hongler, M. -O.
- 129-143 A two-echelon inventory system with transportation capacity constraint
by Huang, H. C. & Chew, E. P. & Goh, K. H.
- 144-162 Ergodicity and analysis of the process describing the system state in polling systems with two queues
by Lillo, Rosa E.
- 163-178 Queueing network model for a single-operator machine interference problem with external operations
by Yang, Taho & Lee, Rong-Shean & Chen, Mu-Chen & Chen, Pangwei
- 179-207 Queueing systems with leadtime constraints: A fluid-model approach for admission and sequencing control
by Maglaras, Constantinos & Van Mieghem, Jan A.
- 208-225 An interval-parameter fuzzy two-stage stochastic program for water resources management under uncertainty
by Maqsood, Imran & Huang, Guo H. & Scott Yeomans, Julian
- 226-242 Using the sum-of-uniforms method to generate correlated random variates with certain marginal distribution
by Chen, Jung-Tai
Printed from https://ideas.repec.org/s/eee/ejores65.html
