IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v153y2020icp1127-1139.html
   My bibliography  Save this article

Application of multi-response robust parameter design for performance optimization of a hybrid draft biomass cook stove

Author

Listed:
  • Kshirsagar, Milind P.
  • Kalamkar, Vilas R.

Abstract

A novel design of a hybrid draft biomass cook stove was proposed, constructed and tested for 54 combinations of five important parameters viz. Inlet area ratio, Fuel surface to volume ratio, Pot diameter, Secondary air flow rate, and Pot gap. The combined effects of these factors on the stove performance parameters such as overall efficiency (ηo), CO emissions and PM2.5 emissions were estimated. The data obtained by executing designed experiments (CCD) on the stove prototype was fitted to independent second-order models using RSM. The fitted models were further used to predict the stove performance for different combinations of the five factors. The analysis revealed that the prototype cannot achieve energy performance better than Tier 2 level and ηo greater than 30%. However, the hybrid draft enabled the prototype to achieve Tier 4 level performance in CO and PM2.5 emissions. Desirability function coupled with the fitted RSM models was used for robust parameter optimization of the stove performance to maximize efficiency, minimize emissions and propagation of error. The robust parameter optimization resulted in the best possible overall stove performance of ηo = 26.54%, CO/MJd = 2.249 g/MJ and PM/MJd = 34.67 mg/MJd obtained at the control factor levels of Ms = 1.74 g/s and Pg = 14 mm.

Suggested Citation

  • Kshirsagar, Milind P. & Kalamkar, Vilas R., 2020. "Application of multi-response robust parameter design for performance optimization of a hybrid draft biomass cook stove," Renewable Energy, Elsevier, vol. 153(C), pages 1127-1139.
  • Handle: RePEc:eee:renene:v:153:y:2020:i:c:p:1127-1139
    DOI: 10.1016/j.renene.2020.02.049
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148120302366
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.renene.2020.02.049?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kshirsagar, Milind P. & Kalamkar, Vilas R., 2014. "A comprehensive review on biomass cookstoves and a systematic approach for modern cookstove design," Renewable and Sustainable Energy Reviews, Elsevier, vol. 30(C), pages 580-603.
    2. Li, Guo-neng & Zhang, Shuai & Zheng, You-qu & Zhu, Ling-yun & Guo, Wen-wen, 2018. "Experimental study on a stove-powered thermoelectric generator (STEG) with self starting fan cooling," Renewable Energy, Elsevier, vol. 121(C), pages 502-512.
    3. Obi, Okey Francis & Ezeoha, Sunday Louis & Okorie, Ifeanyichukwu Christian, 2016. "Energetic performance of a top-lit updraft (TLUD) cookstove," Renewable Energy, Elsevier, vol. 99(C), pages 730-737.
    4. Cai, Junmeng & He, Yifeng & Yu, Xi & Banks, Scott W. & Yang, Yang & Zhang, Xingguang & Yu, Yang & Liu, Ronghou & Bridgwater, Anthony V., 2017. "Review of physicochemical properties and analytical characterization of lignocellulosic biomass," Renewable and Sustainable Energy Reviews, Elsevier, vol. 76(C), pages 309-322.
    5. Caposciutti, Gianluca & Antonelli, Marco, 2018. "Experimental investigation on air displacement and air excess effect on CO, CO2 and NOx emissions of a small size fixed bed biomass boiler," Renewable Energy, Elsevier, vol. 116(PA), pages 795-804.
    6. Núñez, José & Moctezuma-Sánchez, Miguel F. & Fisher, Elizabeth M. & Berrueta, Víctor M. & Masera, Omar R. & Beltrán, Alberto, 2020. "Natural-draft flow and heat transfer in a plancha-type biomass cookstove," Renewable Energy, Elsevier, vol. 146(C), pages 727-736.
    7. Kshirsagar, Milind P. & Kalamkar, Vilas R., 2016. "User-centric approach for the design and sizing of natural convection biomass cookstoves for lower emissions," Energy, Elsevier, vol. 115(P1), pages 1202-1215.
    8. Erol, M. & Haykiri-Acma, H. & Küçükbayrak, S., 2010. "Calorific value estimation of biomass from their proximate analyses data," Renewable Energy, Elsevier, vol. 35(1), pages 170-173.
    9. Manoj Kumar, & Sachin Kumar, & Tyagi, S.K., 2013. "Design, development and technological advancement in the biomass cookstoves: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 26(C), pages 265-285.
    10. Bhatt, B.P. & Rathore, S.S. & Lemtur, Moanaro & Sarkar, Bikash, 2016. "Fuelwood energy pattern and biomass resources in Eastern Himalaya," Renewable Energy, Elsevier, vol. 94(C), pages 410-417.
    11. Kshirsagar, Milind P. & Kalamkar, Vilas R., 2015. "A mathematical tool for predicting thermal performance of natural draft biomass cookstoves and identification of a new operational parameter," Energy, Elsevier, vol. 93(P1), pages 188-201.
    12. Lubwama, Michael & Yiga, Vianney Andrew, 2018. "Characteristics of briquettes developed from rice and coffee husks for domestic cooking applications in Uganda," Renewable Energy, Elsevier, vol. 118(C), pages 43-55.
    13. Lenth, Russell V., 2009. "Response-Surface Methods in R, Using rsm," Journal of Statistical Software, Foundation for Open Access Statistics, vol. 32(i07).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Suyitno & Heru Sutanto & Mohammad Muqoffa & Tito Gusti Nurrohim, 2022. "An Experimental and Numerical Study of the Burning of Calliandra Wood Pellets in a 200 kW Furnace," Energies, MDPI, vol. 15(21), pages 1-14, November.
    2. König, Mario & Hartmann, Ingo & Varas-Concha, Felipe & Torres-Fuchslocher, Carlos & Hoferecht, Frank, 2021. "Effects of single and combined retrofit devices on the performance of wood stoves," Renewable Energy, Elsevier, vol. 171(C), pages 75-84.
    3. İhsan Yanıkoğlu & Erinç Albey & Serkan Okçuoğlu, 2022. "Robust Parameter Design and Optimization for Quality Engineering," SN Operations Research Forum, Springer, vol. 3(1), pages 1-36, March.
    4. Ghiwe, Suraj S. & Kalamkar, Vilas R. & Sharma, Sanjay K. & Sawarkar, Pravin D., 2023. "Numerical and experimental study on the performance of a hybrid draft biomass cookstove," Renewable Energy, Elsevier, vol. 205(C), pages 53-65.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ghiwe, Suraj S. & Kalamkar, Vilas R. & Sharma, Sanjay K. & Sawarkar, Pravin D., 2023. "Numerical and experimental study on the performance of a hybrid draft biomass cookstove," Renewable Energy, Elsevier, vol. 205(C), pages 53-65.
    2. Rohan R. Pande & Vilas R. Kalamkar & Milind Kshirsagar, 2019. "Making the popular clean: improving the traditional multipot biomass cookstove in Maharashtra, India," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 21(3), pages 1391-1410, June.
    3. Rohan R. Pande & Milind P. Kshirsagar & Vilas R. Kalamkar, 2020. "Experimental and CFD analysis to study the effect of inlet area ratio in a natural draft biomass cookstove," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 22(3), pages 1897-1911, March.
    4. Kshirsagar, Milind P. & Kalamkar, Vilas R., 2016. "User-centric approach for the design and sizing of natural convection biomass cookstoves for lower emissions," Energy, Elsevier, vol. 115(P1), pages 1202-1215.
    5. Phisamas Hwangdee & Singrun Charee & Watcharin Kheowkrai & Chaiyan Junsiri & Kittipong Laloon, 2022. "Application of the Simplex-Centroid Mixture Design to Biomass Charcoal Powder Formulation Ratio for Biomass Charcoal Briquettes," Sustainability, MDPI, vol. 14(7), pages 1-15, March.
    6. Raman, P. & Ram, N.K. & Murali, J., 2014. "Improved test method for evaluation of bio-mass cook-stoves," Energy, Elsevier, vol. 71(C), pages 479-495.
    7. Zhang, Zongxi & Zhang, Yixiang & Zhou, Yuguang & Ahmad, Riaz & Pemberton-Pigott, Crispin & Annegarn, Harold & Dong, Renjie, 2017. "Systematic and conceptual errors in standards and protocols for thermal performance of biomass stoves," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 1343-1354.
    8. Grabher, Harald F. & Erb, Karlheinz & Singh, Simron & Haberl, Helmut, 2024. "Household energy systems based on biomass: Tracing material flows from source to service in rural Ethiopia," Ecological Economics, Elsevier, vol. 217(C).
    9. Deng, Lei & Torres-Rojas, Dorisel & Burford, Michael & Whitlow, Thomas H. & Lehmann, Johannes & Fisher, Elizabeth M., 2018. "Fuel sensitivity of biomass cookstove performance," Applied Energy, Elsevier, vol. 215(C), pages 13-20.
    10. Kütt, Lauri & Millar, John & Karttunen, Antti & Lehtonen, Matti & Karppinen, Maarit, 2018. "Thermoelectric applications for energy harvesting in domestic applications and micro-production units. Part I: Thermoelectric concepts, domestic boilers and biomass stoves," Renewable and Sustainable Energy Reviews, Elsevier, vol. 98(C), pages 519-544.
    11. Núñez, José & Moctezuma-Sánchez, Miguel F. & Fisher, Elizabeth M. & Berrueta, Víctor M. & Masera, Omar R. & Beltrán, Alberto, 2020. "Natural-draft flow and heat transfer in a plancha-type biomass cookstove," Renewable Energy, Elsevier, vol. 146(C), pages 727-736.
    12. Lombardi, Francesco & Colombo, Luigi & Colombo, Emanuela, 2017. "Design and validation of a Cooking Stoves Thermal Performance Simulator (Cook-STePS) to simulate water heating procedures in selected conditions," Energy, Elsevier, vol. 141(C), pages 1384-1392.
    13. Edwina Fingleton-Smith, 2022. "Smoke and mirrors—the complexities of cookstove adoption and use in Kenya," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 24(3), pages 3926-3946, March.
    14. Sedighi, Mohammadreza & Salarian, Hesamoddin, 2017. "A comprehensive review of technical aspects of biomass cookstoves," Renewable and Sustainable Energy Reviews, Elsevier, vol. 70(C), pages 656-665.
    15. Kang, Kang & Klinghoffer, Naomi B. & ElGhamrawy, Islam & Berruti, Franco, 2021. "Thermochemical conversion of agroforestry biomass and solid waste using decentralized and mobile systems for renewable energy and products," Renewable and Sustainable Energy Reviews, Elsevier, vol. 149(C).
    16. Sutar, Kailasnath B. & Kohli, Sangeeta & Ravi, M.R. & Ray, Anjan, 2015. "Biomass cookstoves: A review of technical aspects," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 1128-1166.
    17. Saidur, R. & Abdelaziz, E.A. & Demirbas, A. & Hossain, M.S. & Mekhilef, S., 2011. "A review on biomass as a fuel for boilers," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(5), pages 2262-2289, June.
    18. Okey Francis Obi & Temitope Olumide Olugbade & Joseph Ifeolu Orisaleye & Ralf Pecenka, 2023. "Solid Biofuel Production from Biomass: Technologies, Challenges, and Opportunities for Its Commercial Production in Nigeria," Energies, MDPI, vol. 16(24), pages 1-22, December.
    19. Shahbeig, Hossein & Nosrati, Mohsen, 2020. "Pyrolysis of municipal sewage sludge for bioenergy production: Thermo-kinetic studies, evolved gas analysis, and techno-socio-economic assessment," Renewable and Sustainable Energy Reviews, Elsevier, vol. 119(C).
    20. Xiao He & Anthony K. Lau & Shahab Sokhansanj, 2019. "Effect of Moisture on Gas Emissions from Stored Woody Biomass," Energies, MDPI, vol. 13(1), pages 1-14, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:153:y:2020:i:c:p:1127-1139. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.