IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v171y2021icp75-84.html
   My bibliography  Save this article

Effects of single and combined retrofit devices on the performance of wood stoves

Author

Listed:
  • König, Mario
  • Hartmann, Ingo
  • Varas-Concha, Felipe
  • Torres-Fuchslocher, Carlos
  • Hoferecht, Frank

Abstract

Firewood plays an important role in the transition towards more environment-friendly heating. However, most installed wood stoves are outdated and demonstrate low efficiency and high emissions. New regulations force users to upgrade or replace their units. Diverse retrofit devices have been developed and tested, but none satisfy the required performance indicators alone and there is a lack of research on their combined operation. We studied the single and combined performance of three technologies (catalytic oxidation, heat recovery and ESP) using a fractional factorial experimental design. The experimental units were two single-room wood stoves equipped with an exhaust fan. The exhaust fan operation pulled down the efficiency by 7–10%. The ESP dropped the PM by 40–46% and reduced the efficiency by 2–3%. The heat exchanger fan increased PM emissions by 38–57%, while efficiency improved by 19–36%. The catalyst reduced the PM by 9–38% while the CO decreased by 31–56%. The combination of the exhaust and heat exchanger fans decreased the PM about 18% and increased the efficiency 26%, while the combination of the ESP and catalyst accomplished a 67% PM reduction.

Suggested Citation

  • König, Mario & Hartmann, Ingo & Varas-Concha, Felipe & Torres-Fuchslocher, Carlos & Hoferecht, Frank, 2021. "Effects of single and combined retrofit devices on the performance of wood stoves," Renewable Energy, Elsevier, vol. 171(C), pages 75-84.
    • Handle: RePEc:eee:renene:v:171:y:2021:i:c:p:75-84
    DOI: 10.1016/j.renene.2021.02.050
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148121002184
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2021.02.050?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Illerup, Jytte Boll & Hansen, Brian Brun & Lin, Weigang & Nickelsen, Joachim & Pedersen, Vagn Hvam & Eskerod, Bente & Dam-Johansen, Kim, 2020. "Performance of an automatically controlled wood stove: Thermal efficiency and carbon monoxide emissions," Renewable Energy, Elsevier, vol. 151(C), pages 640-647.
    2. Grigonytė-Lopez Rodriguez, Julija & Suhonen, Heikki & Laitinen, Ari & Tissari, Jarkko & Kortelainen, Miika & Tiitta, Petri & Lähde, Anna & Keskinen, Jorma & Jokiniemi, Jorma & Sippula, Olli, 2020. "A novel electrical charging condensing heat exchanger for efficient particle emission reduction in small wood boilers," Renewable Energy, Elsevier, vol. 145(C), pages 521-529.
    3. Kshirsagar, Milind P. & Kalamkar, Vilas R., 2020. "Application of multi-response robust parameter design for performance optimization of a hybrid draft biomass cook stove," Renewable Energy, Elsevier, vol. 153(C), pages 1127-1139.
    4. Paulsen, Alex D. & Kunsa, Tyler A. & Carpenter, Andrew L. & Amundsen, Ted J. & Schwartz, Nicholas R. & Harrington, Jason & Reed, Jackson & Alcorn, Brett & Gattoni, John & Yelvington, Paul E., 2019. "Gaseous and particulate emissions from a chimneyless biomass cookstove equipped with a potassium catalyst," Applied Energy, Elsevier, vol. 235(C), pages 369-378.
    5. Sikkema, Richard & Proskurina, Svetlana & Banja, Manjola & Vakkilainen, Esa, 2021. "How can solid biomass contribute to the EU’s renewable energy targets in 2020, 2030 and what are the GHG drivers and safeguards in energy- and forestry sectors?," Renewable Energy, Elsevier, vol. 165(P1), pages 758-772.
    6. Meloni, E. & Caldera, M. & Palma, V. & Pignatelli, V. & Gerardi, V., 2019. "Soot abatement from biomass boilers by means of open-cell foams filters," Renewable Energy, Elsevier, vol. 131(C), pages 745-754.
    7. Lim, Mook Tzeng & Phan, Anh & Roddy, Dermot & Harvey, Adam, 2015. "Technologies for measurement and mitigation of particulate emissions from domestic combustion of biomass: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 49(C), pages 574-584.
    8. Vicente, E.D. & Vicente, A.M. & Evtyugina, M. & Tarelho, L.A.C. & Almeida, S.M. & Alves, C., 2020. "Emissions from residential combustion of certified and uncertified pellets," Renewable Energy, Elsevier, vol. 161(C), pages 1059-1071.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Gallardo, Sebastián & Farías, Oscar & Cornejo, Pablo & Cuevas, Cristian & Valín, Maylí & Jimenez, Jorge, 2024. "Improving the performance of a condensing heat exchanger for biomass combustion at household scale," Renewable Energy, Elsevier, vol. 228(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Sekoai, Patrick T. & Chunilall, Viren & Msele, Kwanele & Buthelezi, Lindiswa & Johakimu, Jonas & Andrew, Jerome & Zungu, Manqoba & Moloantoa, Karabelo & Maningi, Nontuthuko & Habimana, Olivier & Swart, 2023. "Biowaste biorefineries in South Africa: Current status, opportunities, and research and development needs," Renewable and Sustainable Energy Reviews, Elsevier, vol. 188(C).
    2. Bartosz Choiński & Ewa Szatyłowicz & Izabela Zgłobicka & Magdalena Joka Ylidiz, 2022. "A Critical Investigation of Certificated Industrial Wood Pellet Combustion: Influence of Process Conditions on CO/CO 2 Emission," Energies, MDPI, vol. 16(1), pages 1-13, December.
    3. Joanna Szyszlak-Bargłowicz & Jacek Wasilewski & Grzegorz Zając & Andrzej Kuranc & Adam Koniuszy & Małgorzata Hawrot-Paw, 2022. "Evaluation of Particulate Matter (PM) Emissions from Combustion of Selected Types of Rapeseed Biofuels," Energies, MDPI, vol. 16(1), pages 1-15, December.
    4. Fanny Groundstroem & Sirkku Juhola, 2021. "Using systems thinking and causal loop diagrams to identify cascading climate change impacts on bioenergy supply systems," Mitigation and Adaptation Strategies for Global Change, Springer, vol. 26(7), pages 1-48, October.
    5. Wang, Dongji & Liu, Liansheng & Yuan, Ye & Yang, Hua & Zhou, Yixing & Duan, Ruanze, 2020. "Design and key heating power parameters of a newly-developed household biomass briquette heating boiler," Renewable Energy, Elsevier, vol. 147(P1), pages 1371-1379.
    6. Trojanowski, Rebecca & Fthenakis, Vasilis, 2019. "Nanoparticle emissions from residential wood combustion: A critical literature review, characterization, and recommendations," Renewable and Sustainable Energy Reviews, Elsevier, vol. 103(C), pages 515-528.
    7. Chapela, S. & Porteiro, J. & Garabatos, M. & Patiño, D. & Gómez, M.A. & Míguez, J.L., 2019. "CFD study of fouling phenomena in small-scale biomass boilers: Experimental validation with two different boilers," Renewable Energy, Elsevier, vol. 140(C), pages 552-562.
    8. Andrzej Kuranc & Monika Stoma & Leszek Rydzak & Monika Pilipiuk, 2020. "Durability Assessment of Wooden Pellets in Relation with Vibrations Occurring in a Logistic Process of the Final Product," Energies, MDPI, vol. 13(22), pages 1-15, November.
    9. Dimitrios Manolopoulos & Konstantinos Vasileioris & Elias Milios & Kyriaki Kitikidou & Gavriil Spyroglou & Kalliopi Radoglou, 2022. "Allometric Models for Estimating the Height of Robinia pseudoacacia L. in Restoration Plantations," Land, MDPI, vol. 11(4), pages 1-13, March.
    10. Mumtaz, Hamza & Sobek, Szymon & Sajdak, Marcin & Muzyka, Roksana & Werle, Sebastian, 2023. "An experimental investigation and process optimization of the oxidative liquefaction process as the recycling method of the end-of-life wind turbine blades," Renewable Energy, Elsevier, vol. 211(C), pages 269-278.
    11. Joseph Oyekale & Mario Petrollese & Vittorio Tola & Giorgio Cau, 2020. "Impacts of Renewable Energy Resources on Effectiveness of Grid-Integrated Systems: Succinct Review of Current Challenges and Potential Solution Strategies," Energies, MDPI, vol. 13(18), pages 1-48, September.
    12. Horvat, Ivan & Dović, Damir & Filipović, Petar, 2021. "Numerical and experimental methods in development of the novel biomass combustion system concept for wood and agro pellets," Energy, Elsevier, vol. 231(C).
    13. Yang, Wei & Zhu, Youjian & Li, Yu & Cheng, Wei & Zhang, Wennan & Yang, Haiping & Tan, Zhiwu & Chen, Hanping, 2022. "Mitigation of particulate matter emissions from co-combustion of rice husk with cotton stalk or cornstalk," Renewable Energy, Elsevier, vol. 190(C), pages 893-902.
    14. Zhu, Youjian & Yang, Wei & Fan, Jiyuan & Kan, Tao & Zhang, Wennan & Liu, Heng & Cheng, Wei & Yang, Haiping & Wu, Xuehong & Chen, Hanping, 2018. "Effect of sodium carboxymethyl cellulose addition on particulate matter emissions during biomass pellet combustion," Applied Energy, Elsevier, vol. 230(C), pages 925-934.
    15. Duong, Van Minh & Flener, Ursula & Hrbek, Jitka & Hofbauer, Hermann, 2022. "Emission characteristics from the combustion of Acacia Mangium in the automatic feeding pellet stove," Renewable Energy, Elsevier, vol. 186(C), pages 183-194.
    16. Muhammad Yaseen & Neha Thapa & Supawan Visetnoi & Shoukat Ali & Shahab E. Saqib, 2023. "Factors Determining the Farmers’ Decision for Adoption and Non-Adoption of Oil Palm Cultivation in Northeast Thailand," Sustainability, MDPI, vol. 15(2), pages 1-19, January.
    17. Gollmer, Christian & Höfer, Isabel & Kaltschmitt, Martin, 2021. "Laboratory-scale additive content assessment for aluminum-silicate-based wood chip additivation," Renewable Energy, Elsevier, vol. 164(C), pages 1471-1484.
    18. Dinko Vusić & Filip Vujanić & Karlo Pešić & Branimir Šafran & Vanja Jurišić & Željko Zečić, 2021. "Variability of Normative Properties of Wood Chips and Implications to Quality Control," Energies, MDPI, vol. 14(13), pages 1-16, June.
    19. İhsan Yanıkoğlu & Erinç Albey & Serkan Okçuoğlu, 2022. "Robust Parameter Design and Optimization for Quality Engineering," SN Operations Research Forum, Springer, vol. 3(1), pages 1-36, March.
    20. Ewelina Olba-Zięty & Jakub Jan Zięty & Mariusz Jerzy Stolarski, 2023. "External Environmental Costs of Solid Biomass Production against the Legal and Political Background in Europe," Energies, MDPI, vol. 16(10), pages 1-27, May.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:171:y:2021:i:c:p:75-84. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.