IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v219y2022ics0951832021007377.html
   My bibliography  Save this article

Vulnerability assessment of process pipelines affected by flood events

Author

Listed:
  • Rossi, Lorenzo
  • Casson Moreno, Valeria
  • Landucci, Gabriele

Abstract

Technological accidents can be triggered by the impact of natural events on industrial areas. Recent studies highlight the problem and the need to assess possible damage to process pipelines involved in flooding scenarios. The present study proposes for the first time a vulnerability model for this equipment category impacted by floods and suitable for the implementation in quantitative risk assessment (QRA) studies for the process industry. A mechanical model was first developed and compared against data available from the historical analysis of past accidents. The model is then applied to several geometries of process pipelines, with the aim of extending the range of conditions for failure prediction and developing a set of simplified correlations for the evaluation of pipelines failure. A simplified approach is finally adopted to develop the vulnerability model, in order to estimate the pipelines failure probability based on the analysis of critical design parameters and flooding conditions. In order to test the potentialities of the method, the vulnerability model proposed was implemented in the framework of a QRA and applied to an industrial case-study.

Suggested Citation

  • Rossi, Lorenzo & Casson Moreno, Valeria & Landucci, Gabriele, 2022. "Vulnerability assessment of process pipelines affected by flood events," Reliability Engineering and System Safety, Elsevier, vol. 219(C).
  • Handle: RePEc:eee:reensy:v:219:y:2022:i:c:s0951832021007377
    DOI: 10.1016/j.ress.2021.108261
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832021007377
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.ress.2021.108261?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Elisabeth Krausmann & Elisabetta Renni & Michela Campedel & Valerio Cozzani, 2011. "Industrial accidents triggered by earthquakes, floods and lightning: lessons learned from a database analysis," Natural Hazards: Journal of the International Society for the Prevention and Mitigation of Natural Hazards, Springer;International Society for the Prevention and Mitigation of Natural Hazards, vol. 59(1), pages 285-300, October.
    2. Gihleb, Rania & Giuntella, Osea & Stella, Luca & Wang, Tianyi, 2022. "Industrial robots, Workers’ safety, and health," Labour Economics, Elsevier, vol. 78(C).
    3. Khakzad, Nima & Van Gelder, Pieter, 2018. "Vulnerability of industrial plants to flood-induced natechs: A Bayesian network approach," Reliability Engineering and System Safety, Elsevier, vol. 169(C), pages 403-411.
    4. Bambang Sayaka & Frans B. M. Dabukke & Sri Suharyono, 2020. "Membangun Kemandirian Industri Benih Padi Nasional," Jurnal Ekonomi Indonesia, Ikatan Sarjana Ekonomi Indonesia - ISEI, vol. 9(3), pages 1-20, Desember.
    5. Thomas J.Flavin & Mardi Dungey & Thomas O'Connor & Michael Wosser, 2020. "Industrial firms and systemic risk," Economics Department Working Paper Series n298-20.pdf, Department of Economics, National University of Ireland - Maynooth.
    6. Maria Milazzo & Giuseppa Ancione & Anna Basco & David Lister & Ernesto Salzano & Giuseppe Maschio, 2013. "Potential loading damage to industrial storage tanks due to volcanic ash fallout," Natural Hazards: Journal of the International Society for the Prevention and Mitigation of Natural Hazards, Springer;International Society for the Prevention and Mitigation of Natural Hazards, vol. 66(2), pages 939-953, March.
    7. Yang, Yunfeng & Chen, Guohua & Reniers, Genserik, 2020. "Vulnerability assessment of atmospheric storage tanks to floods based on logistic regression," Reliability Engineering and System Safety, Elsevier, vol. 196(C).
    8. Antonioni, Giacomo & Landucci, Gabriele & Necci, Amos & Gheorghiu, Diana & Cozzani, Valerio, 2015. "Quantitative assessment of risk due to NaTech scenarios caused by floods," Reliability Engineering and System Safety, Elsevier, vol. 142(C), pages 334-345.
    9. Landucci, Gabriele & Antonioni, Giacomo & Tugnoli, Alessandro & Cozzani, Valerio, 2012. "Release of hazardous substances in flood events: Damage model for atmospheric storage tanks," Reliability Engineering and System Safety, Elsevier, vol. 106(C), pages 200-216.
    10. Hessel C. Winsemius & Jeroen C. J. H. Aerts & Ludovicus P. H. van Beek & Marc F. P. Bierkens & Arno Bouwman & Brenden Jongman & Jaap C. J. Kwadijk & Willem Ligtvoet & Paul L. Lucas & Detlef P. van Vuu, 2016. "Global drivers of future river flood risk," Nature Climate Change, Nature, vol. 6(4), pages 381-385, April.
    11. S H T, Kumudumali, 2020. "Impact of COVID-19 on Tourism Industry: A Review," MPRA Paper 102834, University Library of Munich, Germany.
    12. Bernier, Carl & Padgett, Jamie E., 2019. "Fragility and risk assessment of aboveground storage tanks subjected to concurrent surge, wave, and wind loads," Reliability Engineering and System Safety, Elsevier, vol. 191(C).
    13. Lanzano, Giovanni & Salzano, Ernesto & de Magistris, Filippo Santucci & Fabbrocino, Giovanni, 2013. "Seismic vulnerability of natural gas pipelines," Reliability Engineering and System Safety, Elsevier, vol. 117(C), pages 73-80.
    14. Dekle, Robert, 2020. "Robots and industrial labor: Evidence from Japan," Journal of the Japanese and International Economies, Elsevier, vol. 58(C).
    15. Amgad S. Khaled & Salma Ahmed & Ali T. Yahya & Najib H.S. Farhan, 2020. "The role of innovation on Indian retail industry," International Journal of Business Innovation and Research, Inderscience Enterprises Ltd, vol. 23(4), pages 435-452.
    16. Khakzad, Nima & Reniers, Genserik, 2015. "Using graph theory to analyze the vulnerability of process plants in the context of cascading effects," Reliability Engineering and System Safety, Elsevier, vol. 143(C), pages 63-73.
    17. Michela Campedel & Valerio Cozzani & Anita Garcia‐Agreda & Ernesto Salzano, 2008. "Extending the Quantitative Assessment of Industrial Risks to Earthquake Effects," Risk Analysis, John Wiley & Sons, vol. 28(5), pages 1231-1246, October.
    18. Misuri, Alessio & Landucci, Gabriele & Cozzani, Valerio, 2021. "Assessment of risk modification due to safety barrier performance degradation in Natech events," Reliability Engineering and System Safety, Elsevier, vol. 212(C).
    19. Grömling, Michael & Matthes, Jürgen, 2020. "Industriekrise ist lang und tief," IW-Kurzberichte 9/2020, Institut der deutschen Wirtschaft (IW) / German Economic Institute.
    20. Olivar, Oscar J. Ramírez & Mayorga, Santiago Zuluaga & Giraldo, Felipe Muñoz & Sánchez-Silva, Mauricio & Pinelli, Jean-Paul & Salzano, Ernesto, 2020. "The effects of extreme winds on atmospheric storage tanks," Reliability Engineering and System Safety, Elsevier, vol. 195(C).
    21. Misuri, Alessio & Landucci, Gabriele & Cozzani, Valerio, 2020. "Assessment of safety barrier performance in Natech scenarios," Reliability Engineering and System Safety, Elsevier, vol. 193(C).
    22. Landucci, Gabriele & Necci, Amos & Antonioni, Giacomo & Tugnoli, Alessandro & Cozzani, Valerio, 2014. "Release of hazardous substances in flood events: Damage model for horizontal cylindrical vessels," Reliability Engineering and System Safety, Elsevier, vol. 132(C), pages 125-145.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Caratozzolo, Vincenzo & Misuri, Alessio & Cozzani, Valerio, 2022. "A generalized equipment vulnerability model for the quantitative risk assessment of horizontal vessels involved in Natech scenarios triggered by floods," Reliability Engineering and System Safety, Elsevier, vol. 223(C).
    2. Wei, Yian & Cheng, Yao & Liao, Haitao, 2024. "Optimal resilience-based restoration of a system subject to recurrent dependent hazards," Reliability Engineering and System Safety, Elsevier, vol. 247(C).
    3. Misuri, Alessio & Ricci, Federica & Sorichetti, Riccardo & Cozzani, Valerio, 2023. "The Effect of Safety Barrier Degradation on the Severity of Primary Natech Scenarios," Reliability Engineering and System Safety, Elsevier, vol. 235(C).
    4. Marroni, Giulia & Casini, Leonardo & Bartolucci, Andrea & Kuipers, Sanneke & Casson Moreno, Valeria & Landucci, Gabriele, 2024. "Development of fragility models for process equipment affected by physical security attacks," Reliability Engineering and System Safety, Elsevier, vol. 243(C).
    5. Nishino, Tomoaki & Miyashita, Takuya & Mori, Nobuhito, 2024. "Methodology for probabilistic tsunami-triggered oil spill fire hazard assessment based on Natech cascading disaster modeling," Reliability Engineering and System Safety, Elsevier, vol. 242(C).
    6. Othman, Abdullah & El-Saoud, Waleed A. & Habeebullah, Turki & Shaaban, Fathy & Abotalib, Abotalib Z., 2023. "Risk assessment of flash flood and soil erosion impacts on electrical infrastructures in overcrowded mountainous urban areas under climate change," Reliability Engineering and System Safety, Elsevier, vol. 236(C).
    7. Jian Guo & Jun Wang & Baikang Zhu & Bingyuan Hong & Cuicui Li & Jianhui He, 2022. "A Risk Evaluation Method of Coastal Oil Depots for Heavy Rainfall Vulnerability Assessment," Sustainability, MDPI, vol. 14(11), pages 1-12, June.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Misuri, Alessio & Landucci, Gabriele & Cozzani, Valerio, 2021. "Assessment of risk modification due to safety barrier performance degradation in Natech events," Reliability Engineering and System Safety, Elsevier, vol. 212(C).
    2. Misuri, Alessio & Ricci, Federica & Sorichetti, Riccardo & Cozzani, Valerio, 2023. "The Effect of Safety Barrier Degradation on the Severity of Primary Natech Scenarios," Reliability Engineering and System Safety, Elsevier, vol. 235(C).
    3. Misuri, Alessio & Landucci, Gabriele & Cozzani, Valerio, 2021. "Assessment of safety barrier performance in the mitigation of domino scenarios caused by Natech events," Reliability Engineering and System Safety, Elsevier, vol. 205(C).
    4. Caratozzolo, Vincenzo & Misuri, Alessio & Cozzani, Valerio, 2022. "A generalized equipment vulnerability model for the quantitative risk assessment of horizontal vessels involved in Natech scenarios triggered by floods," Reliability Engineering and System Safety, Elsevier, vol. 223(C).
    5. Yuksel, Mujde & Smith, Andrew N. & Milne, George R., 2021. "Fantasy sports and beyond: Complementary digital experiences (CDXs) as innovations for enhancing fan experience," Journal of Business Research, Elsevier, vol. 134(C), pages 143-155.
    6. Yang, Yunfeng & Chen, Guohua & Reniers, Genserik, 2020. "Vulnerability assessment of atmospheric storage tanks to floods based on logistic regression," Reliability Engineering and System Safety, Elsevier, vol. 196(C).
    7. Horesh, Noah & Quinn, Casey & Wang, Hongjie & Zane, Regan & Ferry, Mike & Tong, Shijie & Quinn, Jason C., 2021. "Driving to the future of energy storage: Techno-economic analysis of a novel method to recondition second life electric vehicle batteries," Applied Energy, Elsevier, vol. 295(C).
    8. Ahmadisedigh, Hossein & Gosselin, Louis, 2022. "How can combined heating and cooling networks benefit from thermal energy storage? Minimizing lifetime cost for different scenarios," Energy, Elsevier, vol. 243(C).
    9. Tao Zeng & Guohua Chen & Yunfeng Yang & Genserik Reniers & Yixin Zhao & Xia Liu, 2020. "A Systematic Literature Review on Safety Research Related to Chemical Industrial Parks," Sustainability, MDPI, vol. 12(14), pages 1-27, July.
    10. Khakzad, Nima & Van Gelder, Pieter, 2018. "Vulnerability of industrial plants to flood-induced natechs: A Bayesian network approach," Reliability Engineering and System Safety, Elsevier, vol. 169(C), pages 403-411.
    11. Negri, Camilla & Ricci, Marina & Zilio, Massimo & D'Imporzano, Giuliana & Qiao, Wei & Dong, Renjie & Adani, Fabrizio, 2020. "Anaerobic digestion of food waste for bio-energy production in China and Southeast Asia: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 133(C).
    12. Schröder, M. & Abdin, Z. & Mérida, W., 2020. "Optimization of distributed energy resources for electric vehicle charging and fuel cell vehicle refueling," Applied Energy, Elsevier, vol. 277(C).
    13. Yunfeng Yang & Guohua Chen & Yuanfei Zhao, 2023. "A Quantitative Framework for Propagation Paths of Natech Domino Effects in Chemical Industrial Parks: Part II—Risk Assessment and Mitigation System," Sustainability, MDPI, vol. 15(10), pages 1-19, May.
    14. Men, Jinkun & Chen, Guohua & Yang, Yunfeng & Reniers, Genserik, 2022. "An event-driven probabilistic methodology for modeling the spatial-temporal evolution of natural hazard-induced domino chain in chemical industrial parks," Reliability Engineering and System Safety, Elsevier, vol. 226(C).
    15. Nishino, Tomoaki & Miyashita, Takuya & Mori, Nobuhito, 2024. "Methodology for probabilistic tsunami-triggered oil spill fire hazard assessment based on Natech cascading disaster modeling," Reliability Engineering and System Safety, Elsevier, vol. 242(C).
    16. Ricci, Federica & Misuri, Alessio & Scarponi, Giordano Emrys & Cozzani, Valerio & Demichela, Micaela, 2024. "Vulnerability Assessment of Industrial Sites to Interface Fires and Wildfires," Reliability Engineering and System Safety, Elsevier, vol. 243(C).
    17. Antonioni, Giacomo & Landucci, Gabriele & Necci, Amos & Gheorghiu, Diana & Cozzani, Valerio, 2015. "Quantitative assessment of risk due to NaTech scenarios caused by floods," Reliability Engineering and System Safety, Elsevier, vol. 142(C), pages 334-345.
    18. Necci, Amos & Argenti, Francesca & Landucci, Gabriele & Cozzani, Valerio, 2014. "Accident scenarios triggered by lightning strike on atmospheric storage tanks," Reliability Engineering and System Safety, Elsevier, vol. 127(C), pages 30-46.
    19. Yuan Chen & Zhijie Zhou & Lihao Yang & Guanyu Hu & Xiaoxia Han & Shuaiwen Tang, 2022. "A novel structural safety assessment method of large liquid tank based on the belief rule base and finite element method," Journal of Risk and Reliability, , vol. 236(3), pages 458-476, June.
    20. Zuluaga Mayorga, Santiago & Sánchez-Silva, Mauricio & Ramírez Olivar, Oscar J. & Muñoz Giraldo, Felipe, 2019. "Development of parametric fragility curves for storage tanks: A Natech approach," Reliability Engineering and System Safety, Elsevier, vol. 189(C), pages 1-10.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:219:y:2022:i:c:s0951832021007377. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.