IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v55y2013icp278-294.html
   My bibliography  Save this article

A theoretical study on the use of microwaves in reducing energy consumption for an endothermic reaction: Role of metal coated bounding surface

Author

Listed:
  • Bhattacharya, Madhuchhanda
  • Basak, Tanmay

Abstract

This work presents a theoretical analysis on savings of energy during an endothermic reaction under microwave heating compared to conventional heating and shows the use of metal coated bounding surface to enhance the energy savings in otherwise low saving zones. Main thrust of this work is the quantification of energy savings for various probable microwave heating scenarios that may arise either due to varying reactor dimension (2L) over thin, intermediate and thick regimes or due to varying dielectric properties of the reactor. The analysis considers detailed transport equations in conjunction with Helmholtz equation for microwave propagation within a semiinfinite batch reactor. Simulations show that use of microwave can significantly save energy (as high as 60%) depending on reactor configuration. Simulations also show efficient use of metal coated bounding surface to enhance energy savings for reactors with 2L/λeff = 0.5n−0.25, where n = 1, 2, 3… and λeff is wavelength of microwave within the reactor. The enhancement is found to be 2 and 1.5 times at 2L/λeff = 0.25 and 0.75, respectively. Various regions of efficient use of metal coated bounding surface for different microwave heating scenarios have been identified in a series of master curves.

Suggested Citation

  • Bhattacharya, Madhuchhanda & Basak, Tanmay, 2013. "A theoretical study on the use of microwaves in reducing energy consumption for an endothermic reaction: Role of metal coated bounding surface," Energy, Elsevier, vol. 55(C), pages 278-294.
    • Handle: RePEc:eee:energy:v:55:y:2013:i:c:p:278-294
    DOI: 10.1016/j.energy.2013.03.016
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544213001977
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2013.03.016?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Motevali, Ali & Minaei, Saeid & Khoshtaghaza, Mohammad Hadi & Amirnejat, Hamed, 2011. "Comparison of energy consumption and specific energy requirements of different methods for drying mushroom slices," Energy, Elsevier, vol. 36(11), pages 6433-6441.
    2. Yao, Ye & Zhang, Weijiang & Liu, Shiqing, 2009. "Feasibility study on power ultrasound for regeneration of silica gel--A potential desiccant used in air-conditioning system," Applied Energy, Elsevier, vol. 86(11), pages 2394-2400, November.
    3. Lam, Su Shiung & Russell, Alan D. & Chase, Howard A., 2010. "Microwave pyrolysis, a novel process for recycling waste automotive engine oil," Energy, Elsevier, vol. 35(7), pages 2985-2991.
    4. Chen, Kang-Shin & Lin, Yuan-Chung & Hsu, Kuo-Hsiang & Wang, Hsin-Kai, 2012. "Improving biodiesel yields from waste cooking oil by using sodium methoxide and a microwave heating system," Energy, Elsevier, vol. 38(1), pages 151-156.
    5. Wang, M.J. & Huang, Y.F. & Chiueh, P.T. & Kuan, W.H. & Lo, S.L., 2012. "Microwave-induced torrefaction of rice husk and sugarcane residues," Energy, Elsevier, vol. 37(1), pages 177-184.
    6. Sharma, G.P. & Prasad, Suresh, 2006. "Specific energy consumption in microwave drying of garlic cloves," Energy, Elsevier, vol. 31(12), pages 1921-1926.
    7. Akyel, C. & Bilgen, E., 1989. "Microwave and radio-frequency curing of polymers: Energy requirements, cost and market penetration," Energy, Elsevier, vol. 14(12), pages 839-851.
    8. Damour, C. & Hamdi, M. & Josset, C. & Auvity, B. & Boillereaux, L., 2012. "Energy analysis and optimization of a food defrosting system," Energy, Elsevier, vol. 37(1), pages 562-570.
    9. Wei, Z.S. & Du, Z.Y. & Lin, Z.H. & He, H.M. & Qiu, R.L., 2007. "Removal of NOx by microwave reactor with ammonium bicarbonate and Ga-A zeolites at low temperature," Energy, Elsevier, vol. 32(8), pages 1455-1459.
    10. Qi, Ronghui & Tian, Changqing & Shao, Shuangquan & Tang, Mingsheng & Lu, Lin, 2011. "Experimental investigation on performance improvement of electro-osmotic regeneration for solid desiccant," Applied Energy, Elsevier, vol. 88(8), pages 2816-2823, August.
    11. Yao, Ye, 2010. "Using power ultrasound for the regeneration of dehumidizers in desiccant air-conditioning systems: A review of prospective studies and unexplored issues," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(7), pages 1860-1873, September.
    12. Zhang, Weijiang & Yao, Ye & He, Beixing & Wang, Rongshun, 2011. "The energy-saving characteristic of silica gel regeneration with high-intensity ultrasound," Applied Energy, Elsevier, vol. 88(6), pages 2146-2156, June.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Gerasev, Alexander P., 2017. "Emergence of traveling wave endothermic reaction in a catalytic fixed bed under microwave heating," Energy, Elsevier, vol. 119(C), pages 989-995.
    2. Bhattacharya, Madhuchhanda & Basak, Tanmay, 2016. "A review on the susceptor assisted microwave processing of materials," Energy, Elsevier, vol. 97(C), pages 306-338.
    3. Abdulrahman, Muhammed Moshin & Meribout, Mahmoud, 2014. "Antenna array design for enhanced oil recovery under oil reservoir constraints with experimental validation," Energy, Elsevier, vol. 66(C), pages 868-880.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ranjbaran, M. & Zare, D., 2013. "Simulation of energetic- and exergetic performance of microwave-assisted fluidized bed drying of soybeans," Energy, Elsevier, vol. 59(C), pages 484-493.
    2. Bhattacharya, Madhuchhanda & Basak, Tanmay, 2016. "A review on the susceptor assisted microwave processing of materials," Energy, Elsevier, vol. 97(C), pages 306-338.
    3. Zhang, Guiying & Tian, Changqing & Shao, Shuangquan, 2014. "Experimental investigation on adsorption and electro-osmosis regeneration of macroporous silica gel desiccant," Applied Energy, Elsevier, vol. 136(C), pages 1010-1017.
    4. Acevedo, Luis & Usón, Sergio & Uche, Javier, 2014. "Exergy transfer analysis of microwave heating systems," Energy, Elsevier, vol. 68(C), pages 349-363.
    5. Acevedo, Luis & Usón, Sergio & Uche, Javier, 2015. "Local exergy cost analysis of microwave heating systems," Energy, Elsevier, vol. 80(C), pages 437-451.
    6. Anubhav Pratap Singh & Ronit Mandal & Maryam Shojaei & Anika Singh & Przemysław Łukasz Kowalczewski & Marta Ligaj & Jarosław Pawlicz & Maciej Jarzębski, 2020. "Novel Drying Methods for Sustainable Upcycling of Brewers’ Spent Grains as a Plant Protein Source," Sustainability, MDPI, vol. 12(9), pages 1-17, May.
    7. Chuck, Christopher J. & Lou-Hing, Daniel & Dean, Rebecca & Sargeant, Lisa A. & Scott, Rod J. & Jenkins, Rhodri W., 2014. "Simultaneous microwave extraction and synthesis of fatty acid methyl ester from the oleaginous yeast Rhodotorula glutinis," Energy, Elsevier, vol. 69(C), pages 446-454.
    8. Yao, Ye & Yang, Kun & Liu, Shiqing, 2014. "Study on the performance of silica gel dehumidification system with ultrasonic-assisted regeneration," Energy, Elsevier, vol. 66(C), pages 799-809.
    9. Singh, Shobhana & Kumar, Subodh, 2013. "Solar drying for different test conditions: Proposed framework for estimation of specific energy consumption and CO2 emissions mitigation," Energy, Elsevier, vol. 51(C), pages 27-36.
    10. Lin, Jintai & Zeng, Zhi & Ma, Qianmin & Wang, Qianming & Zhang, Yanfen, 2014. "Effects of multiple irradiations on luminescent materials and energy savings – A case study for the synthesis of BaMO4: Ln3+ (M = W, Mo; Ln = Eu, Tb) phosphors," Energy, Elsevier, vol. 64(C), pages 551-556.
    11. Gupta, Anilkumar R. & Rathod, Virendra K., 2018. "Calcium diglyceroxide catalyzed biodiesel production from waste cooking oil in the presence of microwave: Optimization and kinetic studies," Renewable Energy, Elsevier, vol. 121(C), pages 757-767.
    12. Yek, Peter Nai Yuh & Cheng, Yoke Wang & Liew, Rock Keey & Wan Mahari, Wan Adibah & Ong, Hwai Chyuan & Chen, Wei-Hsin & Peng, Wanxi & Park, Young-Kwon & Sonne, Christian & Kong, Sieng Huat & Tabatabaei, 2021. "Progress in the torrefaction technology for upgrading oil palm wastes to energy-dense biochar: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 151(C).
    13. Peng-Lim, Boey & Ganesan, Shangeetha & Maniam, Gaanty Pragas & Khairuddean, Melati, 2012. "Sequential conversion of high free fatty acid oils into biodiesel using a new catalyst system," Energy, Elsevier, vol. 46(1), pages 132-139.
    14. Angrisani, Giovanni & Capozzoli, Alfonso & Minichiello, Francesco & Roselli, Carlo & Sasso, Maurizio, 2011. "Desiccant wheel regenerated by thermal energy from a microcogenerator: Experimental assessment of the performances," Applied Energy, Elsevier, vol. 88(4), pages 1354-1365, April.
    15. Batidzirai, B. & Mignot, A.P.R. & Schakel, W.B. & Junginger, H.M. & Faaij, A.P.C., 2013. "Biomass torrefaction technology: Techno-economic status and future prospects," Energy, Elsevier, vol. 62(C), pages 196-214.
    16. Wan Adibah Wan Mahari & Nur Fatihah Zainuddin & Wan Mohd Norsani Wan Nik & Cheng Tung Chong & Su Shiung Lam, 2016. "Pyrolysis Recovery of Waste Shipping Oil Using Microwave Heating," Energies, MDPI, vol. 9(10), pages 1-9, September.
    17. Talebian-Kiakalaieh, Amin & Amin, Nor Aishah Saidina & Mazaheri, Hossein, 2013. "A review on novel processes of biodiesel production from waste cooking oil," Applied Energy, Elsevier, vol. 104(C), pages 683-710.
    18. Li, Yangyang & Jin, Yiying & Li, Jinhui, 2016. "Influence of thermal hydrolysis on composition characteristics of fatty acids in kitchen waste," Energy, Elsevier, vol. 102(C), pages 139-147.
    19. Liu, Hongdou & Yang, Hongquan & Qi, Ronghui, 2020. "A review of electrically driven dehumidification technology for air-conditioning systems," Applied Energy, Elsevier, vol. 279(C).
    20. Maurizio Passaponti & Leonardo Lari & Marco Bonechi & Francesca Bruni & Walter Giurlani & Gabriele Sciortino & Luca Rosi & Lorenzo Fabbri & Martina Vizza & Vlado K. Lazarov & Claudio Fontanesi & Massi, 2020. "Optimisation Study of Co Deposition on Chars from MAP of Waste Tyres as Green Electrodes in ORR for Alkaline Fuel Cells," Energies, MDPI, vol. 13(21), pages 1-13, October.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:55:y:2013:i:c:p:278-294. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.