IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v282y2023ics0360544223022119.html
   My bibliography  Save this article

Power density performances and multi-objective optimizations for an irreversible Otto cycle with five specific heat models of working fluid

Author

Listed:
  • Chen, Lingen
  • Shi, Shuangshuang
  • Ge, Yanlin
  • Feng, Huijun

Abstract

Power density (Pd) performance for an irreversible Otto cycle is analyzed with constant specific heat (SH), linear and nonlinear variable SH, linear and nonlinear variable SH ratio of working fluid. Relationships among dimensionless Pd (P‾d), thermal efficiency (η) and compression ratio (γ) of cycle are obtained taking three loss items account into. Performances are compared when dimensionless power output (P‾) and P‾d are maximized with five SH models. Choosing γ as design parameter, and P‾, η, dimensionless ecological function and P‾d as performance parameters, multi-objective optimizations are carried out for five SH models by using NSGA-Ⅱ. Evaluating deviation indices (D s) under three decision-making methods, the optimal parameter combination with the smallest D is selected as the better one. Results show that SH model has no qualitative influence on relationship curve of P‾d−γ and P‾d−η, but it has quantitative influence. With linearly variable SH and constant SH, γP‾d reaches the maximum and minimum respectively. With linearly variable SH ratio and nonlinearly variable SH, ηP‾d reaches the maximum and minimum respectively. The D of LINMAP method with constant SH model is the smallest, which is 0.1236, and the D of Shannon entropy method with the nonlinear variable SH ratio model is the largest, which is 0.3664.

Suggested Citation

  • Chen, Lingen & Shi, Shuangshuang & Ge, Yanlin & Feng, Huijun, 2023. "Power density performances and multi-objective optimizations for an irreversible Otto cycle with five specific heat models of working fluid," Energy, Elsevier, vol. 282(C).
    • Handle: RePEc:eee:energy:v:282:y:2023:i:c:s0360544223022119
    DOI: 10.1016/j.energy.2023.128817
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223022119
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2023.128817?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Chen, Lingen & Xia, Shaojun, 2022. "Maximizing power of irreversible multistage chemical engine with linear mass transfer law using HJB theory," Energy, Elsevier, vol. 261(PB).
    2. Jin, Qinglong & Xia, Shaojun & Chen, Lingen, 2023. "A modified recompression S–CO2 Brayton cycle and its thermodynamic optimization," Energy, Elsevier, vol. 263(PE).
    3. Ares de Parga-Regalado, A.M. & Ramírez-Moreno, M.A. & Angulo-Brown, F., 2023. "A comparative thermodynamic and thermoeconomic analysis between two ecological regimes for the Novikov energy converter," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 615(C).
    4. Valencia-Ortega, G. & Levario-Medina, S. & Angulo-Brown, F. & Barranco-Jiménez, M.A., 2023. "Energetic optimization and local stability of heliothermal plant models under three thermo-economic performance regimes," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 613(C).
    5. Chen, Lingen & Shi, Shuangshuang & Ge, Yanlin & Feng, Huijun, 2023. "Performance optimization of diffusive mass transfer law irreversible isothermal chemical pump," Energy, Elsevier, vol. 263(PC).
    6. Ares de Parga-Regalado, A.M. & Valencia-Ortega, G. & Barranco-Jiménez, M.A., 2023. "Thermo-economic optimization of irreversible Novikov power plant models including a proposal of dissipation cost," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 613(C).
    7. Liang, Tao & Hu, Cong & Fu, Tong & Su, Shanhe & Chen, Jincan, 2022. "The maximum efficiency enhancement of a solar-driven graphene-anode thermionic converter realizing total photon reflection," Energy, Elsevier, vol. 239(PA).
    8. Qin, Lei & Xie, Gongnan & Ma, Yuan & Li, Shulei, 2023. "Thermodynamic analysis and multi-objective optimization of a waste heat recovery system with a combined supercritical/transcritical CO2 cycle," Energy, Elsevier, vol. 265(C).
    9. Ge, Yanlin & Chen, Lingen & Sun, Fengrui, 2008. "Finite-time thermodynamic modelling and analysis of an irreversible Otto-cycle," Applied Energy, Elsevier, vol. 85(7), pages 618-624, July.
    10. Ge, Yanlin & Wu, Heng & Chen, Lingen & Feng, Huijun & Xie, Zhihui, 2023. "Finite time and finite speed thermodynamic optimization for an irreversible Atkinson cycle," Energy, Elsevier, vol. 270(C).
    11. Hu, Cong & Fu, Tong & Liang, Tao & Chen, Xiaohang & Su, Shanhe & Chen, Jincan, 2021. "Efficiency enhancement of an updated solar-driven intermediate band thermoradiative device," Energy, Elsevier, vol. 228(C).
    12. Chen, Jincan & Zhao, Yingru & He, Jizhou, 2006. "Optimization criteria for the important parameters of an irreversible Otto heat-engine," Applied Energy, Elsevier, vol. 83(3), pages 228-238, March.
    13. Chen, Lingen & Shi, Shuangshuang & Ge, Yanlin & Feng, Huijun, 2023. "Ecological function performance analysis and multi-objective optimization for an endoreversible four-reservoir chemical pump," Energy, Elsevier, vol. 282(C).
    14. Tierney, Michael, 2020. "Minimum exergy destruction from endoreversible and finite-time thermodynamics machines and their concomitant indirect energy," Energy, Elsevier, vol. 197(C).
    15. Dobrucali, Erinc, 2016. "The effects of the engine design and running parameters on the performance of a Otto–Miller Cycle engine," Energy, Elsevier, vol. 103(C), pages 119-126.
    16. Chen, Lingen & Qi, Congzheng & Ge, Yanlin & Feng, Huijun, 2022. "Thermal Brownian heat engine with external and internal irreversibilities," Energy, Elsevier, vol. 255(C).
    17. Ahmadi, Mohammad H. & Jokar, Mohammad Ali & Ming, Tingzhen & Feidt, Michel & Pourfayaz, Fathollah & Astaraei, Fatemeh Razi, 2018. "Multi-objective performance optimization of irreversible molten carbonate fuel cell–Braysson heat engine and thermodynamic analysis with ecological objective approach," Energy, Elsevier, vol. 144(C), pages 707-722.
    18. Chen, Lingen & Xia, Shaojun, 2022. "Maximizing power output of endoreversible non-isothermal chemical engine via linear irreversible thermodynamics," Energy, Elsevier, vol. 255(C).
    19. Liang, Tao & Chen, Jingyi & Chen, Xiaohang & Su, Shanhe & Chen, Jincan, 2022. "Trade-off between the near-field heat transfer and the space charge effect in graphene-anode thermionic energy converters," Energy, Elsevier, vol. 260(C).
    20. Chen, Lingen & Xia, Shaojun, 2023. "Maximum work configuration for irreversible finite-heat-capacity source engines by applying averaged-optimal-control theory," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 617(C).
    21. Chen, Lingen & Yang, Bo & Feng, Huijun & Ge, Yanlin & Xia, Shaojun, 2020. "Performance optimization of an open simple-cycle gas turbine combined cooling, heating and power plant driven by basic oxygen furnace gas in China's steelmaking plants," Energy, Elsevier, vol. 203(C).
    22. Yang, Wenhao & Feng, Huijun & Chen, Lingen & Ge, Yanlin, 2023. "Power and efficiency optimizations of a simple irreversible supercritical organic Rankine cycle," Energy, Elsevier, vol. 278(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chen, Lingen & Shi, Shuangshuang & Ge, Yanlin & Feng, Huijun, 2023. "Ecological function performance analysis and multi-objective optimization for an endoreversible four-reservoir chemical pump," Energy, Elsevier, vol. 282(C).
    2. Huang, Jialuo & Xia, Shaojun & Chen, Lingen, 2024. "Optimal configurations of ammonia decomposition reactor with minimum power consumption and minimum heat transfer rate," Energy, Elsevier, vol. 293(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chen, Lingen & Shi, Shuangshuang & Ge, Yanlin & Feng, Huijun, 2023. "Ecological function performance analysis and multi-objective optimization for an endoreversible four-reservoir chemical pump," Energy, Elsevier, vol. 282(C).
    2. Yang, Wenhao & Feng, Huijun & Chen, Lingen & Ge, Yanlin, 2023. "Power and efficiency optimizations of a simple irreversible supercritical organic Rankine cycle," Energy, Elsevier, vol. 278(C).
    3. Huang, Jialuo & Xia, Shaojun & Chen, Lingen, 2024. "Optimal configurations of ammonia decomposition reactor with minimum power consumption and minimum heat transfer rate," Energy, Elsevier, vol. 293(C).
    4. Qi, Congzheng & Chen, Lingen & Ge, Yanlin & Feng, Huijun, 2023. "Three-heat-reservoir thermal Brownian heat transformer and its performance limits," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 622(C).
    5. Chen, Lingen & Lorenzini, Giulio, 2023. "Heating load, COP and exergetic efficiency optimizations for TEG-TEH combined thermoelectric device with Thomson effect and external heat transfer," Energy, Elsevier, vol. 270(C).
    6. Jin, Qinglong & Xia, Shaojun & Chen, Lingen, 2023. "A modified recompression S–CO2 Brayton cycle and its thermodynamic optimization," Energy, Elsevier, vol. 263(PE).
    7. Chen, Lingen & Shi, Shuangshuang & Ge, Yanlin & Feng, Huijun, 2023. "Performance optimization of diffusive mass transfer law irreversible isothermal chemical pump," Energy, Elsevier, vol. 263(PC).
    8. Ge, Yanlin & Wu, Heng & Chen, Lingen & Feng, Huijun & Xie, Zhihui, 2023. "Finite time and finite speed thermodynamic optimization for an irreversible Atkinson cycle," Energy, Elsevier, vol. 270(C).
    9. Shi, Shuangshuang & Chen, Lingen & Ge, Yanlin & Feng, Huijun, 2024. "Performance optimization of non-isothermal endoreversible chemical pump via Lewis analogy," Energy, Elsevier, vol. 300(C).
    10. Li, Zhaojin & Bi, Yuehong & Wang, Cun & Shi, Qi & Mou, Tianhong, 2023. "Finite time thermodynamic optimization for performance of absorption energy storage systems," Energy, Elsevier, vol. 282(C).
    11. Chen, Lingen & Xia, Shaojun, 2023. "Maximum work configuration for irreversible finite-heat-capacity source engines by applying averaged-optimal-control theory," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 617(C).
    12. Shuangshuang Shi & Yanlin Ge & Lingen Chen & Huijun Feng, 2021. "Performance Optimizations with Single-, Bi-, Tri-, and Quadru-Objective for Irreversible Atkinson Cycle with Nonlinear Variation of Working Fluid’s Specific Heat," Energies, MDPI, vol. 14(14), pages 1-23, July.
    13. Osorio, Julian D. & Rivera-Alvarez, Alejandro, 2018. "Efficiency enhancement of spark-ignition engines using a Continuous Variable Valve Timing system for load control," Energy, Elsevier, vol. 161(C), pages 649-662.
    14. Niu, Jintao & Wang, Jiansheng & Liu, Xueling, 2023. "Thermodynamic and economic analysis of organic Rankine cycle combined with flash cycle and ejector," Energy, Elsevier, vol. 282(C).
    15. Bahram Ghorbani, 2021. "Development of an Integrated Structure for the Tri-Generation of Power, Liquid Carbon Dioxide, and Medium Pressure Steam Using a Molten Carbonate Fuel Cell, a Dual Pressure Linde-Hampson Liquefaction ," Sustainability, MDPI, vol. 13(15), pages 1-21, July.
    16. Büyüközkan, Gülçin & Karabulut, Yağmur & Mukul, Esin, 2018. "A novel renewable energy selection model for United Nations' sustainable development goals," Energy, Elsevier, vol. 165(PA), pages 290-302.
    17. Cheng, Kunlin & Li, Jiahui & Yu, Jianchi & Fu, Chuanjie & Qin, Jiang & Jing, Wuxing, 2023. "Novel thermoelectric generator enhanced supercritical carbon dioxide closed-Brayton-cycle power generation systems: Performance comparison and configuration optimization," Energy, Elsevier, vol. 284(C).
    18. Lu, Shengdong & Yang, Xinle & Bu, Shujuan & Li, Weikang & Yu, Ning & Wang, Xin & Dai, Wenzhi & Liu, Xunan, 2024. "Performance and parameter prediction of SCR–ORC system based on data–model fusion and twin data–driven," Energy, Elsevier, vol. 290(C).
    19. Liang, Tao & Chen, Jingyi & Chen, Xiaohang & Su, Shanhe & Chen, Jincan, 2022. "Trade-off between the near-field heat transfer and the space charge effect in graphene-anode thermionic energy converters," Energy, Elsevier, vol. 260(C).
    20. Qin, Peijia & Tan, Xianlin & Huang, Youbin & Pan, Mingming & Ouyang, Tiancheng, 2023. "Two-stage robust optimal scheduling framework applied for microgrids: Combined energy recovery and forecast," Renewable Energy, Elsevier, vol. 214(C), pages 290-306.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:282:y:2023:i:c:s0360544223022119. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.