IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v227y2021ics0360544221005879.html
   My bibliography  Save this article

An experimental study on the thermal characteristics of the Cell-To-Pack system

Author

Listed:
  • Wang, Huaibin
  • Wang, Shuyu
  • Feng, Xuning
  • Zhang, Xuan
  • Dai, Kangwei
  • Sheng, Jun
  • Zhao, Zhenyang
  • Du, Zhiming
  • Zhang, Zelin
  • Shen, Kai
  • Xu, Chengshan
  • Wang, Qinzheng
  • Sun, Xiaoyu
  • Li, Yanliang
  • Ling, Jiaju
  • Feng, Jiani
  • Wang, Hewu
  • Ouyang, Minggao

Abstract

The development of electric vehicle batteries has resulted in high energy density battery pack. Cell-to-Pack (CTP) omits the cell module assembly, can reduce battery pack parts by 40%, improve the battery pack volume utilization rate by 15%–20%. However, the thermal characteristics of CTP under full operating conditions has yet to be verified, the CTP temperature calibration cycle under full working condition is time-consuming, and little analysis has been conducted on CTP internal temperature differentials and heat flow. The present study aims to thermal characteristics of CTP. Results show that CTP temperature calibration based on a thermal resistance grid can realize internal temperature reconstruction, optimum temperature arrangement, and shorten the calibration period by more than 60%. In addition, higher ambient temperatures can increase the maximum temperature of the jelly rolls in CTP cells, while lower ambient temperature can lead to larger differences in jelly roll temperature within a cell; and high-speed driving and fast charging can lead to the highest temperature increase rates under different working conditions up to 0.05 °C s−1.70% of the heat generated during cell discharge is used for self-heating, and the heat dissipation of liquid cooled plate is the main heat dissipation channel.

Suggested Citation

  • Wang, Huaibin & Wang, Shuyu & Feng, Xuning & Zhang, Xuan & Dai, Kangwei & Sheng, Jun & Zhao, Zhenyang & Du, Zhiming & Zhang, Zelin & Shen, Kai & Xu, Chengshan & Wang, Qinzheng & Sun, Xiaoyu & Li, Yanl, 2021. "An experimental study on the thermal characteristics of the Cell-To-Pack system," Energy, Elsevier, vol. 227(C).
  • Handle: RePEc:eee:energy:v:227:y:2021:i:c:s0360544221005879
    DOI: 10.1016/j.energy.2021.120338
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544221005879
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2021.120338?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Bai, Fanfei & Chen, Mingbiao & Song, Wenji & Yu, Qinghua & Li, Yongliang & Feng, Ziping & Ding, Yulong, 2019. "Investigation of thermal management for lithium-ion pouch battery module based on phase change slurry and mini channel cooling plate," Energy, Elsevier, vol. 167(C), pages 561-574.
    2. Sheng, Lei & Zhang, Hengyun & Su, Lin & Zhang, Zhendong & Zhang, Hua & Li, Kang & Fang, Yidong & Ye, Wen, 2021. "Effect analysis on thermal profile management of a cylindrical lithium-ion battery utilizing a cellular liquid cooling jacket," Energy, Elsevier, vol. 220(C).
    3. Jouhara, Hussam & Khordehgah, Navid & Serey, Nicolas & Almahmoud, Sulaiman & Lester, Stephen P. & Machen, Daniel & Wrobel, Luiz, 2019. "Applications and thermal management of rechargeable batteries for industrial applications," Energy, Elsevier, vol. 170(C), pages 849-861.
    4. Safdari, Mojtaba & Ahmadi, Rouhollah & Sadeghzadeh, Sadegh, 2020. "Numerical investigation on PCM encapsulation shape used in the passive-active battery thermal management," Energy, Elsevier, vol. 193(C).
    5. Ma, Yan & Mou, Hongyuan & Zhao, Haiyan, 2020. "Cooling optimization strategy for lithium-ion batteries based on triple-step nonlinear method," Energy, Elsevier, vol. 201(C).
    6. Menale, Carla & D'Annibale, Francesco & Mazzarotta, Barbara & Bubbico, Roberto, 2019. "Thermal management of lithium-ion batteries: An experimental investigation," Energy, Elsevier, vol. 182(C), pages 57-71.
    7. Jilte, Ravindra & Afzal, Asif & Panchal, Satyam, 2021. "A novel battery thermal management system using nano-enhanced phase change materials," Energy, Elsevier, vol. 219(C).
    8. Zhu, Xiaoqing & Wang, Zhenpo & Wang, Yituo & Wang, Hsin & Wang, Cong & Tong, Lei & Yi, Mi, 2019. "Overcharge investigation of large format lithium-ion pouch cells with Li(Ni0.6Co0.2Mn0.2)O2 cathode for electric vehicles: Thermal runaway features and safety management method," Energy, Elsevier, vol. 169(C), pages 868-880.
    9. Wang, Fangxian & Cao, Jiahao & Ling, Ziye & Zhang, Zhengguo & Fang, Xiaoming, 2020. "Experimental and simulative investigations on a phase change material nano-emulsion-based liquid cooling thermal management system for a lithium-ion battery pack," Energy, Elsevier, vol. 207(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Huang, Deyang & Chen, Ziqiang & Zhou, Shiyao, 2022. "Self-powered heating strategy for lithium-ion battery pack applied in extremely cold climates," Energy, Elsevier, vol. 239(PB).
    2. Jia, Zhuangzhuang & Huang, Zonghou & Zhai, Hongju & Qin, Pen & Zhang, Yue & Li, Yawen & Wang, Qingsong, 2022. "Experimental investigation on thermal runaway propagation of 18,650 lithium-ion battery modules with two cathode materials at low pressure," Energy, Elsevier, vol. 251(C).
    3. Li, Yalun & Gao, Xinlei & Feng, Xuning & Ren, Dongsheng & Li, Yan & Hou, Junxian & Wu, Yu & Du, Jiuyu & Lu, Languang & Ouyang, Minggao, 2022. "Battery eruption triggered by plated lithium on an anode during thermal runaway after fast charging," Energy, Elsevier, vol. 239(PB).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Fan, Zhaohui & Gao, Renjing & Liu, Shutian, 2022. "Thermal conductivity enhancement and thermal saturation elimination designs of battery thermal management system for phase change materials based on triply periodic minimal surface," Energy, Elsevier, vol. 259(C).
    2. Guo, Chao & Liu, Huan-ling & Guo, Qi & Shao, Xiao-dong & Zhu, Ming-liang, 2022. "Investigations on a novel cold plate achieved by topology optimization for lithium-ion batteries," Energy, Elsevier, vol. 261(PA).
    3. Shen, Zu-Guo & Chen, Shuai & Liu, Xun & Chen, Ben, 2021. "A review on thermal management performance enhancement of phase change materials for vehicle lithium-ion batteries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 148(C).
    4. Wu, Nan & Ye, Xiaolin & Li, Junjie & Lin, Boshen & Zhou, Xuelong & Yu, Bin, 2021. "Passive thermal management systems employing hydrogel for the large-format lithium-ion cell: A systematic study," Energy, Elsevier, vol. 231(C).
    5. Elsewify, O. & Souri, M. & Esfahani, M.N. & Hosseinzadeh, E. & Jabbari, M., 2021. "A new method for internal cooling of a large format lithium-ion battery pouch cell," Energy, Elsevier, vol. 225(C).
    6. Peizheng Li & Jiapei Zhao & Shuai Zhou & Jiabin Duan & Xinke Li & Houcheng Zhang & Jinliang Yuan, 2023. "Design and Optimization of a Liquid Cooling Thermal Management System with Flow Distributors and Spiral Channel Cooling Plates for Lithium-Ion Batteries," Energies, MDPI, vol. 16(5), pages 1-23, February.
    7. Liang, Lin & Zhao, Yaohua & Diao, Yanhua & Ren, Ruyang & Jing, Heran, 2021. "Inclined U-shaped flat microheat pipe array configuration for cooling and heating lithium-ion battery modules in electric vehicles," Energy, Elsevier, vol. 235(C).
    8. Weng, Jingwen & Xiao, Changren & Ouyang, Dongxu & Yang, Xiaoqing & Chen, Mingyi & Zhang, Guoqing & Yuen, Richard Kwok Kit & Wang, Jian, 2022. "Mitigation effects on thermal runaway propagation of structure-enhanced phase change material modules with flame retardant additives," Energy, Elsevier, vol. 239(PC).
    9. Chunyu Zhao & Beile Zhang & Yuanming Zheng & Shunyuan Huang & Tongtong Yan & Xiufang Liu, 2020. "Hybrid Battery Thermal Management System in Electrical Vehicles: A Review," Energies, MDPI, vol. 13(23), pages 1-18, November.
    10. Lalan K. Singh & Anoop K. Gupta, 2023. "Hybrid cooling-based lithium-ion battery thermal management for electric vehicles," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 25(4), pages 3627-3648, April.
    11. Murali, G. & Sravya, G.S.N. & Jaya, J. & Naga Vamsi, V., 2021. "A review on hybrid thermal management of battery packs and it's cooling performance by enhanced PCM," Renewable and Sustainable Energy Reviews, Elsevier, vol. 150(C).
    12. Qaderi, Alireza & Veysi, Farzad, 2022. "Investigation of a water-NEPCM cooling thermal management system for cylindrical 18650 Li-ion batteries," Energy, Elsevier, vol. 244(PA).
    13. Shan, Shuai & Li, Li & Xu, Qiang & Ling, Lei & Xie, Yajun & Wang, Hongkang & Zheng, Keqing & Zhang, Lanchun & Bei, Shaoyi, 2023. "Numerical investigation of a compact and lightweight thermal management system with axially mounted cooling tubes for cylindrical lithium-ion battery module," Energy, Elsevier, vol. 274(C).
    14. Wan, Hongri & Shen, Xiran & Jiang, Hao & Zhang, Cheng & Jiang, Kaile & Chen, Teng & Shi, Liluo & Dong, Liming & He, Changchun & Xu, Yan & Li, Jing & Chen, Yan, 2021. "Biomass-derived N/S dual-doped porous hard-carbon as high-capacity anodes for lithium/sodium ions batteries," Energy, Elsevier, vol. 231(C).
    15. Yang, Huizhu & Li, Mingxuan & Wang, Zehui & Ma, Binjian, 2023. "A compact and lightweight hybrid liquid cooling system coupling with Z-type cold plates and PCM composite for battery thermal management," Energy, Elsevier, vol. 263(PE).
    16. Huang, Li & Piontek, Udo & Chen, Mingbiao & Zheng, Rongyue & Zhuang, Lulu & Zou, Deqiu, 2023. "Thermal performance of cold plate based on phase change emulsion for Li-ion battery," Energy, Elsevier, vol. 282(C).
    17. Zha, Yunfei & Meng, Xianfeng & Qin, Shuaishuai & Hou, Nairen & He, Shunquan & Huang, Caiyuan & Zuo, Hongyan & Zhao, Xiaohuan, 2023. "Performance evaluation with orthogonal experiment method of drop contact heat dissipation effects on electric vehicle lithium-ion battery," Energy, Elsevier, vol. 271(C).
    18. Safdari, Mojtaba & Ahmadi, Rouhollah & Sadeghzadeh, Sadegh, 2022. "Numerical and experimental investigation on electric vehicles battery thermal management under New European Driving Cycle," Applied Energy, Elsevier, vol. 315(C).
    19. Liu, Huan-ling & Shi, Hang-bo & Shen, Han & Xie, Gongnan, 2019. "The performance management of a Li-ion battery by using tree-like mini-channel heat sinks: Experimental and numerical optimization," Energy, Elsevier, vol. 189(C).
    20. Luo, Jie & Gu, Heng & Wang, Shuo & Wang, Hao & Zou, Deqiu, 2022. "A coupled power battery cooling system based on phase change material and its influencing factors," Applied Energy, Elsevier, vol. 326(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:227:y:2021:i:c:s0360544221005879. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.