IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v216y2021ics0360544220323379.html
   My bibliography  Save this article

Synthesis-structure-property relationship of nitrogen-doped porous covalent triazine frameworks for pre-combustion CO2 capture

Author

Listed:
  • Mukhtar, Ahmad
  • Ullah, Sami
  • Inayat, Abrar
  • Saqib, Sidra
  • Mellon, Nurhayati Binti
  • Assiri, Mohammed Ali
  • Al-Sehemi, Abdullah G.
  • Khan Niazi, Muhammad Bilal
  • Jahan, Zaib
  • Bustam, Mohamad Azmi
  • Ibrahim, Muhammad

Abstract

In this work, high pressure selective CO2/CH4 adsorption over functionalized covalent triazine based frameworks (CTF-NH) have been reported at high-pressure (1–20 bar) and different temperatures. The findings revealed that the successive incorporation of amine functionalities to the CTF leads to the enhancement of CO2 and CH4 adsorption capacities by 94.99% and 3.69%, respectively. The CO2 and CH4 adsorption capacities decreased with rising temperatures. The selectivity of CO2/CH4 was improved from 2.745 to 5.145. The different adsorption isotherms showed good fitting agreement with the experimentally acquired data with a lower value (AARE and R2) approaching to 1. The isotherm analysis exhibited that the adsorption is heterogeneous and satisfactory under these conditions. Dubinin-Radushkevich (D-R) isotherm analysis showed that the physisorption is dominant, with adsorption energy of less than 20 kJ/mol. Finally, thermodynamic properties revealed that at lower temperatures, the adsorption phenomenon is satisfactory, physical in nature, and exhibiting less disorder and randomness.

Suggested Citation

  • Mukhtar, Ahmad & Ullah, Sami & Inayat, Abrar & Saqib, Sidra & Mellon, Nurhayati Binti & Assiri, Mohammed Ali & Al-Sehemi, Abdullah G. & Khan Niazi, Muhammad Bilal & Jahan, Zaib & Bustam, Mohamad Azmi , 2021. "Synthesis-structure-property relationship of nitrogen-doped porous covalent triazine frameworks for pre-combustion CO2 capture," Energy, Elsevier, vol. 216(C).
  • Handle: RePEc:eee:energy:v:216:y:2021:i:c:s0360544220323379
    DOI: 10.1016/j.energy.2020.119230
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220323379
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2020.119230?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Park, Jaewoo & Attia, Nour F. & Jung, Minji & Lee, Myoung Eun & Lee, Kiyoung & Chung, Jaewoo & Oh, Hyunchul, 2018. "Sustainable nanoporous carbon for CO2, CH4, N2, H2 adsorption and CO2/CH4 and CO2/N2 separation," Energy, Elsevier, vol. 158(C), pages 9-16.
    2. Sami Ullah & Mohammed A. Assiri & Abdullah G. Al‐Sehemi & Mohamad Azmi Bustam & Hafiz Abdul Mannan & Firas A. Abdulkareem & Ahmad Irfan & Sidra Saqib, 2019. "High‐temperature CO2 removal from CH4 using silica membrane: experimental and neural network modeling," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 9(5), pages 1010-1026, October.
    3. Esmaeili, Faezeh & Gholami, Mohsen & Hojjat, Mohammad, 2019. "Accelerated CO2 capture on adsorbent coated finned tube: An experimental study," Energy, Elsevier, vol. 187(C).
    4. Heo, Young-Jung & Park, Soo-Jin, 2015. "A role of steam activation on CO2 capture and separation of narrow microporous carbons produced from cellulose fibers," Energy, Elsevier, vol. 91(C), pages 142-150.
    5. Olajire, Abass A., 2010. "CO2 capture and separation technologies for end-of-pipe applications – A review," Energy, Elsevier, vol. 35(6), pages 2610-2628.
    6. Li, Xiaoqiang & Ding, Yudong & Guo, Liheng & Liao, Qiang & Zhu, Xun & Wang, Hong, 2019. "Non-aqueous energy-efficient absorbents for CO2 capture based on porous silica nanospheres impregnated with amine," Energy, Elsevier, vol. 171(C), pages 109-119.
    7. Nie, Lijuan & Jin, Junsu & Chen, Jian & Mi, Jianguo, 2018. "Preparation and performance of amine-based polyacrylamide composite beads for CO2 capture," Energy, Elsevier, vol. 161(C), pages 60-69.
    8. Irani, Maryam & Jacobson, Andrew T. & Gasem, Khaled A.M. & Fan, Maohong, 2018. "Facilely synthesized porous polymer as support of poly(ethyleneimine) for effective CO2 capture," Energy, Elsevier, vol. 157(C), pages 1-9.
    9. Paritosh Mohanty & Lilian D. Kull & Kai Landskron, 2011. "Porous covalent electron-rich organonitridic frameworks as highly selective sorbents for methane and carbon dioxide," Nature Communications, Nature, vol. 2(1), pages 1-6, September.
    10. Shengchang Xiang & Yabing He & Zhangjing Zhang & Hui Wu & Wei Zhou & Rajamani Krishna & Banglin Chen, 2012. "Microporous metal-organic framework with potential for carbon dioxide capture at ambient conditions," Nature Communications, Nature, vol. 3(1), pages 1-9, January.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Narukulla, Ramesh & Chaturvedi, Krishna Raghav & Ojha, Umaprasana & Sharma, Tushar, 2022. "Carbon dioxide capturing evaluation of polyacryloyl hydrazide solutions via rheological analysis for carbon utilization applications," Energy, Elsevier, vol. 241(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Xiaoqiang & Ding, Yudong & Guo, Liheng & Liao, Qiang & Zhu, Xun & Wang, Hong, 2019. "Non-aqueous energy-efficient absorbents for CO2 capture based on porous silica nanospheres impregnated with amine," Energy, Elsevier, vol. 171(C), pages 109-119.
    2. Ding, Yudong & Ma, Lijiao & Yang, Xiaoqiang & Zhu, Xun & Wang, Hong & Cheng, Min & Liao, Qiang, 2023. "Anhydrous multi-hybrid absorbent with low viscosity and high regeneration efficiency for post-combustion CO2 capture," Energy, Elsevier, vol. 263(PA).
    3. Kobayashi, Makoto & Akiho, Hiroyuki & Nakao, Yoshinobu, 2015. "Performance evaluation of porous sodium aluminate sorbent for halide removal process in oxy-fuel IGCC power generation plant," Energy, Elsevier, vol. 92(P3), pages 320-327.
    4. Zhao, Zhijun & Xing, Xiao & Tang, Zhigang & Zheng, Yong & Fei, Weiyang & Liang, Xiangfeng & Ataeivarjovi, E. & Guo, Dong, 2018. "Experiment and simulation study of CO2 solubility in dimethyl carbonate, 1-octyl-3-methylimidazolium tetrafluoroborate and their mixtures," Energy, Elsevier, vol. 143(C), pages 35-42.
    5. Narukulla, Ramesh & Chaturvedi, Krishna Raghav & Ojha, Umaprasana & Sharma, Tushar, 2022. "Carbon dioxide capturing evaluation of polyacryloyl hydrazide solutions via rheological analysis for carbon utilization applications," Energy, Elsevier, vol. 241(C).
    6. Dindi, Abdallah & Quang, Dang Viet & Abu-Zahra, Mohammad R.M., 2015. "Simultaneous carbon dioxide capture and utilization using thermal desalination reject brine," Applied Energy, Elsevier, vol. 154(C), pages 298-308.
    7. Vega, F. & Baena-Moreno, F.M. & Gallego Fernández, Luz M. & Portillo, E. & Navarrete, B. & Zhang, Zhien, 2020. "Current status of CO2 chemical absorption research applied to CCS: Towards full deployment at industrial scale," Applied Energy, Elsevier, vol. 260(C).
    8. Chen, Hao & Zhang, Yao Jun & He, Pan Yang & Li, Chan Juan, 2019. "Synthesis, characterization and modification of monolithic ZSM-5 from geopolymer for CO2 capture: Experiments and DFT calculations," Energy, Elsevier, vol. 179(C), pages 422-430.
    9. Budzianowski, Wojciech Marcin, 2011. "Can ‘negative net CO2 emissions’ from decarbonised biogas-to-electricity contribute to solving Poland’s carbon capture and sequestration dilemmas?," Energy, Elsevier, vol. 36(11), pages 6318-6325.
    10. Xue‐Fei Wang & Long Xiong & Li Li & Jun‐Jun Zhong, 2020. "Effect of heat treatment temperature on CO2 capture of nitrogen‐enriched porous carbon fibers," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 10(2), pages 461-471, April.
    11. Zhang, Hanfei & Wang, Ligang & Pérez-Fortes, Mar & Van herle, Jan & Maréchal, François & Desideri, Umberto, 2020. "Techno-economic optimization of biomass-to-methanol with solid-oxide electrolyzer," Applied Energy, Elsevier, vol. 258(C).
    12. Chen, Zhaoyang & Fang, Jie & Xu, Chungang & Xia, Zhiming & Yan, Kefeng & Li, Xiaosen, 2020. "Carbon dioxide hydrate separation from Integrated Gasification Combined Cycle (IGCC) syngas by a novel hydrate heat-mass coupling method," Energy, Elsevier, vol. 199(C).
    13. Ronald Ssebadduka & Kyuro Sasaki & Yuichi Sugai, 2020. "An Analysis of the Possible Financial Savings of a Carbon Capture Process through Carbon Dioxide Absorption and Geological Dumping," International Journal of Energy Economics and Policy, Econjournals, vol. 10(4), pages 266-270.
    14. Bihong, Lv & Kexuan, Yang & Xiaobin, Zhou & Zuoming, Zhou & Guohua, Jing, 2020. "2-Amino-2-methyl-1-propanol based non-aqueous absorbent for energy-efficient and non-corrosive carbon dioxide capture," Applied Energy, Elsevier, vol. 264(C).
    15. Nasvi, M.C.M. & Ranjith, P.G. & Sanjayan, J. & Haque, A., 2013. "Sub- and super-critical carbon dioxide permeability of wellbore materials under geological sequestration conditions: An experimental study," Energy, Elsevier, vol. 54(C), pages 231-239.
    16. Adnan, Muflih A. & Hossain, Mohammad M. & Kibria, Md Golam, 2020. "Biomass upgrading to high-value chemicals via gasification and electrolysis: A thermodynamic analysis," Renewable Energy, Elsevier, vol. 162(C), pages 1367-1379.
    17. Chen, Wei-Hsin & Hou, Yu-Lin & Hung, Chen-I., 2012. "A study of influence of acoustic excitation on carbon dioxide capture by a droplet," Energy, Elsevier, vol. 37(1), pages 311-321.
    18. An, Xuefei & Li, Tongxin & Chen, Jiaqi & Fu, Dong, 2023. "3D-hierarchical porous functionalized carbon aerogel from renewable cellulose: An innovative solid-amine adsorbent with high CO2 adsorption performance," Energy, Elsevier, vol. 274(C).
    19. Yudong Ding & Liheng Guo & Xiaoqiang Li & Qiang Liao & Xun Zhu & Hong Wang, 2021. "CO2 absorption of anhydrous colloidal suspension based silica nanospheres with different microstructures," Energy & Environment, , vol. 32(8), pages 1437-1456, December.
    20. Zhang, Hao & Lai, Yanhua & Yang, Xiao & Li, Chang & Dong, Yong, 2022. "Non-evaporative solvent extraction technology applied to water and heat recovery from low-temperature flue gas: Parametric analysis and feasibility evaluation," Energy, Elsevier, vol. 244(PB).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:216:y:2021:i:c:s0360544220323379. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.