IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v11y2019i14p3771-d247076.html
   My bibliography  Save this article

Optimal Production Planning and Pollution Control in Petroleum Refineries Using Mathematical Programming and Dispersion Models

Author

Listed:
  • Amani Alnahdi

    (Department of Chemical Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada)

  • Ali Elkamel

    (Department of Chemical Engineering, University of Waterloo, Waterloo, ON N2L 3G1, Canada
    Department of Chemical Engineering, Khalifa University, SAN Campus, Abu Dhabi 2533, UAE)

  • Munawar A. Shaik

    (Department of Chemical Engineering, Khalifa University, SAN Campus, Abu Dhabi 2533, UAE
    Department of Chemical Engineering, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110016, India)

  • Saad A. Al-Sobhi

    (Department of Chemical Engineering, Qatar University, Doha 2713, Qatar)

  • Fatih S. Erenay

    (Department of Management Sciences, University of Waterloo, Waterloo, ON N2L 3G1, Canada)

Abstract

Oil refineries, producing a large variety of products, are considered as one of the main sources of air contaminants such as sulfur oxides (SO x ), hydrocarbons, nitrogen oxides (NO x ), and carbon dioxide (CO 2 ), which are primarily caused by fuel combustion. Gases emanated from the combustion of fuel in an oil refinery need to be reduced, as it poses an environmental hazard. Several strategies can be applied in order to mitigate emissions and meet environmental regulations. This study proposes a mathematical programming model to derive the optimal pollution control strategies for an oil refinery, considering various reduction options for multiple pollutants. The objective of this study is to help decision makers select the most economic pollution control strategy, while satisfying given emission reduction targets. The proposed model is tested on an industrial scale oil refinery sited in North Toronto, Ontario, Canada considering emissions of NO x , SO x , and CO 2 . In this analysis, the dispersion of these air pollutants is captured using a screening model (SCREEN3) and a non-steady state CALPUFF model based on topographical and meteorological conditions. This way, the impacts of geographic location on the concentration of pollutant emissions were examined in a realistic way. The numerical experiments showed that the optimal production and pollution control plans derived from the proposed optimization model can reduce NO x , SO x , and CO 2 emission by up to 60% in exchange of up to 10.7% increase in cost. The results from the dispersion models verified that these optimal production and pollution control plans may achieve a significant reduction in pollutant emission in a large geographic area around the refinery site.

Suggested Citation

  • Amani Alnahdi & Ali Elkamel & Munawar A. Shaik & Saad A. Al-Sobhi & Fatih S. Erenay, 2019. "Optimal Production Planning and Pollution Control in Petroleum Refineries Using Mathematical Programming and Dispersion Models," Sustainability, MDPI, vol. 11(14), pages 1-31, July.
    • Handle: RePEc:gam:jsusta:v:11:y:2019:i:14:p:3771-:d:247076
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/11/14/3771/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/11/14/3771/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Olajire, Abass A., 2010. "CO2 capture and separation technologies for end-of-pipe applications – A review," Energy, Elsevier, vol. 35(6), pages 2610-2628.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kobayashi, Makoto & Akiho, Hiroyuki & Nakao, Yoshinobu, 2015. "Performance evaluation of porous sodium aluminate sorbent for halide removal process in oxy-fuel IGCC power generation plant," Energy, Elsevier, vol. 92(P3), pages 320-327.
    2. Zhao, Zhijun & Xing, Xiao & Tang, Zhigang & Zheng, Yong & Fei, Weiyang & Liang, Xiangfeng & Ataeivarjovi, E. & Guo, Dong, 2018. "Experiment and simulation study of CO2 solubility in dimethyl carbonate, 1-octyl-3-methylimidazolium tetrafluoroborate and their mixtures," Energy, Elsevier, vol. 143(C), pages 35-42.
    3. Narukulla, Ramesh & Chaturvedi, Krishna Raghav & Ojha, Umaprasana & Sharma, Tushar, 2022. "Carbon dioxide capturing evaluation of polyacryloyl hydrazide solutions via rheological analysis for carbon utilization applications," Energy, Elsevier, vol. 241(C).
    4. Dindi, Abdallah & Quang, Dang Viet & Abu-Zahra, Mohammad R.M., 2015. "Simultaneous carbon dioxide capture and utilization using thermal desalination reject brine," Applied Energy, Elsevier, vol. 154(C), pages 298-308.
    5. Vega, F. & Baena-Moreno, F.M. & Gallego Fernández, Luz M. & Portillo, E. & Navarrete, B. & Zhang, Zhien, 2020. "Current status of CO2 chemical absorption research applied to CCS: Towards full deployment at industrial scale," Applied Energy, Elsevier, vol. 260(C).
    6. Budzianowski, Wojciech Marcin, 2011. "Can ‘negative net CO2 emissions’ from decarbonised biogas-to-electricity contribute to solving Poland’s carbon capture and sequestration dilemmas?," Energy, Elsevier, vol. 36(11), pages 6318-6325.
    7. Zhang, Hanfei & Wang, Ligang & Pérez-Fortes, Mar & Van herle, Jan & Maréchal, François & Desideri, Umberto, 2020. "Techno-economic optimization of biomass-to-methanol with solid-oxide electrolyzer," Applied Energy, Elsevier, vol. 258(C).
    8. Chen, Zhaoyang & Fang, Jie & Xu, Chungang & Xia, Zhiming & Yan, Kefeng & Li, Xiaosen, 2020. "Carbon dioxide hydrate separation from Integrated Gasification Combined Cycle (IGCC) syngas by a novel hydrate heat-mass coupling method," Energy, Elsevier, vol. 199(C).
    9. Ronald Ssebadduka & Kyuro Sasaki & Yuichi Sugai, 2020. "An Analysis of the Possible Financial Savings of a Carbon Capture Process through Carbon Dioxide Absorption and Geological Dumping," International Journal of Energy Economics and Policy, Econjournals, vol. 10(4), pages 266-270.
    10. Li, Xiaoqiang & Ding, Yudong & Guo, Liheng & Liao, Qiang & Zhu, Xun & Wang, Hong, 2019. "Non-aqueous energy-efficient absorbents for CO2 capture based on porous silica nanospheres impregnated with amine," Energy, Elsevier, vol. 171(C), pages 109-119.
    11. Nasvi, M.C.M. & Ranjith, P.G. & Sanjayan, J. & Haque, A., 2013. "Sub- and super-critical carbon dioxide permeability of wellbore materials under geological sequestration conditions: An experimental study," Energy, Elsevier, vol. 54(C), pages 231-239.
    12. Adnan, Muflih A. & Hossain, Mohammad M. & Kibria, Md Golam, 2020. "Biomass upgrading to high-value chemicals via gasification and electrolysis: A thermodynamic analysis," Renewable Energy, Elsevier, vol. 162(C), pages 1367-1379.
    13. Chen, Wei-Hsin & Hou, Yu-Lin & Hung, Chen-I., 2012. "A study of influence of acoustic excitation on carbon dioxide capture by a droplet," Energy, Elsevier, vol. 37(1), pages 311-321.
    14. Zhang, Hao & Lai, Yanhua & Yang, Xiao & Li, Chang & Dong, Yong, 2022. "Non-evaporative solvent extraction technology applied to water and heat recovery from low-temperature flue gas: Parametric analysis and feasibility evaluation," Energy, Elsevier, vol. 244(PB).
    15. Mohammad Amin Zamiri & Ali Kargari & Hamidreza Sanaeepur, 2015. "Ethylene vinyl acetate/poly(ethylene glycol) blend membranes for CO 2 /N 2 separation," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 5(5), pages 668-681, October.
    16. Zhang, Minkai & Guo, Yincheng, 2017. "Regeneration energy analysis of NH3-based CO2 capture process integrated with a flow-by capacitive ion separation device," Energy, Elsevier, vol. 125(C), pages 178-185.
    17. Hwang, Kyung-Ran & Park, Jin-Woo & Lee, Sung-Wook & Hong, Sungkook & Lee, Chun-Boo & Oh, Duck-Kyu & Jin, Min-Ho & Lee, Dong-Wook & Park, Jong-Soo, 2015. "Catalytic combustion of the retentate gas from a CO2/H2 separation membrane reactor for further CO2 enrichment and energy recovery," Energy, Elsevier, vol. 90(P1), pages 1192-1198.
    18. Chen, Wei-Hsin & Hou, Yu-Lin & Hung, Chen-I, 2011. "A theoretical analysis of the capture of greenhouse gases by single water droplet at atmospheric and elevated pressures," Applied Energy, Elsevier, vol. 88(12), pages 5120-5130.
    19. Ding, Yudong & Ma, Lijiao & Yang, Xiaoqiang & Zhu, Xun & Wang, Hong & Cheng, Min & Liao, Qiang, 2023. "Anhydrous multi-hybrid absorbent with low viscosity and high regeneration efficiency for post-combustion CO2 capture," Energy, Elsevier, vol. 263(PA).
    20. Li, Yanping & Su, Zhen & Qiao, Qi & Hu, Xuewen & Wan, Si & Zhao, Ruonan, 2017. "Integrated assessment of process pollution prevention and end-of-pipe control in secondary lead smelting," Resources, Conservation & Recycling, Elsevier, vol. 117(PA), pages 1-11.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:11:y:2019:i:14:p:3771-:d:247076. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.