IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v241y2022ics0360544221031789.html
   My bibliography  Save this article

Carbon dioxide capturing evaluation of polyacryloyl hydrazide solutions via rheological analysis for carbon utilization applications

Author

Listed:
  • Narukulla, Ramesh
  • Chaturvedi, Krishna Raghav
  • Ojha, Umaprasana
  • Sharma, Tushar

Abstract

PAHz is a relatively inexpensive material which has several industrial applications but its interaction and utilization in conjunction with CO2 has not been explored. In this study, carbon dioxide (CO2) capturing potential of a polymeric material viz., polyacryloyl hydrazide (PAHz) with specific hydrazide functional group is reported. Characterization tools i.e., microscopic, absorption rate kinetics and rheological analysis were used to determine optimum composition ensuing CO2 uptake via interaction between functional group and CO2 molecules. A varying concentration i.e., 5–30 wt% of PAHz was used. PAHz solution with ≤10 wt% was entirely saturated by small size CO2 bubbles and absorption increases with increasing equilibrium pressure as shown by molality results. With high PAHz concentration >10 wt%, capturing of CO2 markedly decreased and globules of moderately entrapped gas caused reduction in aqueous phase participating in CO2 absorption. CO2 responsiveness with a functional group to develop gelling in solution depended on PAHz concentration. At low concentration, PAHz chains were lesser in population which developed preliminary gelling in solution while high concentration produced sufficient PAHz chains for CO2 interaction. This resulted in the solution to display premature gelling that restricted further entry of CO2, and several CO2 bubbles aggregated near top of solution. In presence of CO2, a sol-gel transition in PAHz solution was anticipated when concentration ∼15 wt%. Finally, rheological investigations were performed to find out the effect of CO2 capturing on the rheological behaviour of solutions. The rheological properties (viscosity and moduli) for 5 and 10 wt% PAHz solutions did not change much after CO2 capturing and stable Newtonian behaviour was observed. The observations presented in the study present a strong case for application of liquid PAHz sample for use as mobility control agent during CO2 injection for EOR and carbon geo-sequestration.

Suggested Citation

  • Narukulla, Ramesh & Chaturvedi, Krishna Raghav & Ojha, Umaprasana & Sharma, Tushar, 2022. "Carbon dioxide capturing evaluation of polyacryloyl hydrazide solutions via rheological analysis for carbon utilization applications," Energy, Elsevier, vol. 241(C).
    • Handle: RePEc:eee:energy:v:241:y:2022:i:c:s0360544221031789
    DOI: 10.1016/j.energy.2021.122929
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544221031789
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2021.122929?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. John J. Vericella & Sarah E. Baker & Joshuah K. Stolaroff & Eric B. Duoss & James O. Hardin & James Lewicki & Elizabeth Glogowski & William C. Floyd & Carlos A. Valdez & William L. Smith & Joe H. Satc, 2015. "Encapsulated liquid sorbents for carbon dioxide capture," Nature Communications, Nature, vol. 6(1), pages 1-7, May.
    2. Mondal, Monoj Kumar & Balsora, Hemant Kumar & Varshney, Prachi, 2012. "Progress and trends in CO2 capture/separation technologies: A review," Energy, Elsevier, vol. 46(1), pages 431-441.
    3. Jun-Hwan Bang & Kyungsun Song & Sangwon Park & Chi Wan Jeon & Seung-Woo Lee & Wonbaek Kim, 2015. "Effects of CO 2 Bubble Size, CO 2 Flow Rate and Calcium Source on the Size and Specific Surface Area of CaCO 3 Particles," Energies, MDPI, vol. 8(10), pages 1-10, October.
    4. Mukhtar, Ahmad & Ullah, Sami & Inayat, Abrar & Saqib, Sidra & Mellon, Nurhayati Binti & Assiri, Mohammed Ali & Al-Sehemi, Abdullah G. & Khan Niazi, Muhammad Bilal & Jahan, Zaib & Bustam, Mohamad Azmi , 2021. "Synthesis-structure-property relationship of nitrogen-doped porous covalent triazine frameworks for pre-combustion CO2 capture," Energy, Elsevier, vol. 216(C).
    5. Sonja Renssen, 2020. "The hydrogen solution?," Nature Climate Change, Nature, vol. 10(9), pages 799-801, September.
    6. Thomas M. McDonald & Jarad A. Mason & Xueqian Kong & Eric D. Bloch & David Gygi & Alessandro Dani & Valentina Crocellà & Filippo Giordanino & Samuel O. Odoh & Walter S. Drisdell & Bess Vlaisavljevich , 2015. "Cooperative insertion of CO2 in diamine-appended metal-organic frameworks," Nature, Nature, vol. 519(7543), pages 303-308, March.
    7. Olajire, Abass A., 2010. "CO2 capture and separation technologies for end-of-pipe applications – A review," Energy, Elsevier, vol. 35(6), pages 2610-2628.
    8. Chaturvedi, Krishna Raghav & Narukulla, Ramesh & Amani, Mahmood & Sharma, Tushar, 2021. "Experimental investigations to evaluate surfactant role on absorption capacity of nanofluid for CO2 utilization in sustainable crude mobilization," Energy, Elsevier, vol. 225(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zhang, Xue & Su, Yuliang & Li, Lei & Da, Qi'an & Hao, Yongmao & Wang, Wendong & Liu, Jiahui & Gao, Xiaogang & Zhao, An & Wang, Kaiyu, 2022. "Microscopic remaining oil initiation mechanism and formation damage of CO2 injection after waterflooding in deep reservoirs," Energy, Elsevier, vol. 248(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Irani, Maryam & Jacobson, Andrew T. & Gasem, Khaled A.M. & Fan, Maohong, 2018. "Facilely synthesized porous polymer as support of poly(ethyleneimine) for effective CO2 capture," Energy, Elsevier, vol. 157(C), pages 1-9.
    2. Bigham, Sajjad & Yu, Dazhi & Chugh, Devesh & Moghaddam, Saeed, 2014. "Moving beyond the limits of mass transport in liquid absorbent microfilms through the implementation of surface-induced vortices," Energy, Elsevier, vol. 65(C), pages 621-630.
    3. Bobo Zheng & Jiuping Xu, 2014. "Carbon Capture and Storage Development Trends from a Techno-Paradigm Perspective," Energies, MDPI, vol. 7(8), pages 1-30, August.
    4. Bhatia, Shashi Kant & Bhatia, Ravi Kant & Jeon, Jong-Min & Kumar, Gopalakrishnan & Yang, Yung-Hun, 2019. "Carbon dioxide capture and bioenergy production using biological system – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 110(C), pages 143-158.
    5. Zhu, Xuancan & Chen, Chunping & Suo, Hongri & Wang, Qiang & Shi, Yixiang & O'Hare, Dermot & Cai, Ningsheng, 2019. "Synthesis of elevated temperature CO2 adsorbents from aqueous miscible organic-layered double hydroxides," Energy, Elsevier, vol. 167(C), pages 960-969.
    6. Rohlfs, Wilko & Madlener, Reinhard, 2013. "Assessment of clean-coal strategies: The questionable merits of carbon capture-readiness," Energy, Elsevier, vol. 52(C), pages 27-36.
    7. Ma, Z.W. & Zhang, P. & Bao, H.S. & Deng, S., 2016. "Review of fundamental properties of CO2 hydrates and CO2 capture and separation using hydration method," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 1273-1302.
    8. Song, Chunfeng & Liu, Qingling & Ji, Na & Deng, Shuai & Zhao, Jun & Li, Yang & Kitamura, Yutaka, 2017. "Reducing the energy consumption of membrane-cryogenic hybrid CO2 capture by process optimization," Energy, Elsevier, vol. 124(C), pages 29-39.
    9. Wang, Pengfei & Chen, Yiqi & Teng, Ying & An, Senyou & Li, Yun & Han, Meng & Yuan, Bao & Shen, Suling & Chen, Bin & Han, Songbai & Zhu, Jinlong & Zhu, Jianbo & Zhao, Yusheng & Xie, Heping, 2024. "A comprehensive review of hydrogen purification using a hydrate-based method," Renewable and Sustainable Energy Reviews, Elsevier, vol. 194(C).
    10. Kobayashi, Makoto & Akiho, Hiroyuki & Nakao, Yoshinobu, 2015. "Performance evaluation of porous sodium aluminate sorbent for halide removal process in oxy-fuel IGCC power generation plant," Energy, Elsevier, vol. 92(P3), pages 320-327.
    11. A. G. Olabi & Tabbi Wilberforce & Enas Taha Sayed & Nabila Shehata & Abdul Hai Alami & Hussein M. Maghrabie & Mohammad Ali Abdelkareem, 2022. "Prospect of Post-Combustion Carbon Capture Technology and Its Impact on the Circular Economy," Energies, MDPI, vol. 15(22), pages 1-38, November.
    12. Chao, Cong & Deng, Yimin & Dewil, Raf & Baeyens, Jan & Fan, Xianfeng, 2021. "Post-combustion carbon capture," Renewable and Sustainable Energy Reviews, Elsevier, vol. 138(C).
    13. Lombardi, L. & Carnevale, E.A., 2016. "Analysis of an innovative process for landfill gas quality improvement," Energy, Elsevier, vol. 109(C), pages 1107-1117.
    14. Višković, Alfredo & Franki, Vladimir & Valentić, Vladimir, 2014. "CCS (carbon capture and storage) investment possibility in South East Europe: A case study for Croatia," Energy, Elsevier, vol. 70(C), pages 325-337.
    15. Song, Chunfeng & Kitamura, Yutaka & Li, Shuhong, 2014. "Energy analysis of the cryogenic CO2 capture process based on Stirling coolers," Energy, Elsevier, vol. 65(C), pages 580-589.
    16. Choi, Seungyeong & Yun, Maroosol & Kim, Kiwoong & Park, Yong-Ki & Cho, Hyung Hee, 2022. "Energy-efficient design of dual circulating fluidized bed system for CCUS by multi-tube configuration with junctions," Energy, Elsevier, vol. 245(C).
    17. Basavaraja, R.J. & Jayanti, S., 2015. "Viability of fuel switching of a gas-fired power plant operating in chemical looping combustion mode," Energy, Elsevier, vol. 81(C), pages 213-221.
    18. Theo, Wai Lip & Lim, Jeng Shiun & Hashim, Haslenda & Mustaffa, Azizul Azri & Ho, Wai Shin, 2016. "Review of pre-combustion capture and ionic liquid in carbon capture and storage," Applied Energy, Elsevier, vol. 183(C), pages 1633-1663.
    19. Dindi, Abdallah & Quang, Dang Viet & Abu-Zahra, Mohammad R.M., 2015. "Simultaneous carbon dioxide capture and utilization using thermal desalination reject brine," Applied Energy, Elsevier, vol. 154(C), pages 298-308.
    20. Vega, F. & Baena-Moreno, F.M. & Gallego Fernández, Luz M. & Portillo, E. & Navarrete, B. & Zhang, Zhien, 2020. "Current status of CO2 chemical absorption research applied to CCS: Towards full deployment at industrial scale," Applied Energy, Elsevier, vol. 260(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:241:y:2022:i:c:s0360544221031789. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.