IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v84y2007i1p16-28.html
   My bibliography  Save this article

Potential of regenerative gas-turbine systems with high fogging compression

Author

Listed:
  • Kim, Kyoung Hoon
  • Perez-Blanco, Horacio

Abstract

The study of evaporatively-cooled cycles is of interest because of the prospect of enhanced efficiencies and conceptual simplicity that can lead to low capital costs. This work focuses on a cycle that relies on continuous cooling of the air under compression, followed by recuperation of residual exhaust heat, combustion and expansion. Ideal gases are modeled, with realistic values of efficiencies, air-to-fuel ratios and turbine-inlet temperatures. As the amount of water injected in the compressor increases, the efficiency of the cycle peaks at progressively higher pressure-ratios. The pressure ratio and the recuperator effectiveness are important parameters for cycle efficiency. Compared to a dry cycle with no recuperation with a pressure ratio of 25, the efficiency can increase from 45% to 51.5% and the specific work from 410Â kJ/kg to 680Â kJ/kg when compression cooling and recuperation are implemented.

Suggested Citation

  • Kim, Kyoung Hoon & Perez-Blanco, Horacio, 2007. "Potential of regenerative gas-turbine systems with high fogging compression," Applied Energy, Elsevier, vol. 84(1), pages 16-28, January.
  • Handle: RePEc:eee:appene:v:84:y:2007:i:1:p:16-28
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306-2619(06)00050-X
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Jonsson, Maria & Yan, Jinyue, 2005. "Humidified gas turbines—a review of proposed and implemented cycles," Energy, Elsevier, vol. 30(7), pages 1013-1078.
    2. Nishida, Kousuke & Takagi, Toshimi & Kinoshita, Shinichi, 2005. "Regenerative steam-injection gas-turbine systems," Applied Energy, Elsevier, vol. 81(3), pages 231-246, July.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Athari, Hassan & Soltani, Saeed & Rosen, Marc A. & Gavifekr, Masood Kordoghli & Morosuk, Tatiana, 2016. "Exergoeconomic study of gas turbine steam injection and combined power cycles using fog inlet cooling and biomass fuel," Renewable Energy, Elsevier, vol. 96(PA), pages 715-726.
    2. Renzi, M. & Caresana, F. & Pelagalli, L. & Comodi, G., 2014. "Enhancing micro gas turbine performance through fogging technique: Experimental analysis," Applied Energy, Elsevier, vol. 135(C), pages 165-173.
    3. Athari, Hassan & Soltani, Saeed & Rosen, Marc A. & Seyed Mahmoudi, Seyed Mohammad & Morosuk, Tatiana, 2016. "Gas turbine steam injection and combined power cycles using fog inlet cooling and biomass fuel: A thermodynamic assessment," Renewable Energy, Elsevier, vol. 92(C), pages 95-103.
    4. Kyoung Hoon Kim & Kyoungjin Kim, 2012. "Exergy Analysis of Overspray Process in Gas Turbine Systems," Energies, MDPI, vol. 5(8), pages 1-14, July.
    5. Comodi, G. & Renzi, M. & Caresana, F. & Pelagalli, L., 2015. "Enhancing micro gas turbine performance in hot climates through inlet air cooling vapour compression technique," Applied Energy, Elsevier, vol. 147(C), pages 40-48.
    6. Hassan Athari & Saeed Soltani & Marc A. Rosen & Seyed Mohammad Seyed Mahmoudi & Tatiana Morosuk, 2015. "Comparative Exergoeconomic Analyses of Gas Turbine Steam Injection Cycles with and without Fogging Inlet Cooling," Sustainability, MDPI, vol. 7(9), pages 1-22, September.
    7. Hassan Athari & Saeed Soltani & Marc A. Rosen & Seyed Mohammad Seyed Mahmoudi & Tatiana Morosuk, 2015. "Thermodynamic Analysis of a Power Plant Integrated with Fogging Inlet Cooling and a Biomass Gasification," Sustainability, MDPI, vol. 7(2), pages 1-16, January.
    8. Athari, Hassan & Soltani, Saeed & Bölükbaşi, Abdurrahim & Rosen, Marc A. & Morosuk, Tatiana, 2015. "Comparative exergoeconomic analyses of the integration of biomass gasification and a gas turbine power plant with and without fogging inlet cooling," Renewable Energy, Elsevier, vol. 76(C), pages 394-400.
    9. Ehyaei, M.A. & Mozafari, A. & Alibiglou, M.H., 2011. "Exergy, economic & environmental (3E) analysis of inlet fogging for gas turbine power plant," Energy, Elsevier, vol. 36(12), pages 6851-6861.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Giorgetti, S. & Bricteux, L. & Parente, A. & Blondeau, J. & Contino, F. & De Paepe, W., 2017. "Carbon capture on micro gas turbine cycles: Assessment of the performance on dry and wet operations," Applied Energy, Elsevier, vol. 207(C), pages 243-253.
    2. Lee, Jong Jun & Jeon, Mu Sung & Kim, Tong Seop, 2010. "The influence of water and steam injection on the performance of a recuperated cycle microturbine for combined heat and power application," Applied Energy, Elsevier, vol. 87(4), pages 1307-1316, April.
    3. Selwynraj, A. Immanuel & Iniyan, S. & Polonsky, Guy & Suganthi, L. & Kribus, Abraham, 2015. "Exergy analysis and annual exergetic performance evaluation of solar hybrid STIG (steam injected gas turbine) cycle for Indian conditions," Energy, Elsevier, vol. 80(C), pages 414-427.
    4. Roumeliotis, I. & Mathioudakis, K., 2010. "Evaluation of water injection effect on compressor and engine performance and operability," Applied Energy, Elsevier, vol. 87(4), pages 1207-1216, April.
    5. Anwar Hamdan Al Assaf & Abdulkarem Amhamed & Odi Fawwaz Alrebei, 2022. "State of the Art in Humidified Gas Turbine Configurations," Energies, MDPI, vol. 15(24), pages 1-32, December.
    6. Mahmood, Muhammad H. & Sultan, Muhammad & Miyazaki, Takahiko & Koyama, Shigeru & Maisotsenko, Valeriy S., 2016. "Overview of the Maisotsenko cycle – A way towards dew point evaporative cooling," Renewable and Sustainable Energy Reviews, Elsevier, vol. 66(C), pages 537-555.
    7. Chacartegui, R. & Sánchez, D. & Muñoz, J.M. & Sánchez, T., 2009. "Alternative ORC bottoming cycles FOR combined cycle power plants," Applied Energy, Elsevier, vol. 86(10), pages 2162-2170, October.
    8. Guerra, Omar J. & Reklaitis, Gintaras V., 2018. "Advances and challenges in water management within energy systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 4009-4019.
    9. Mahdi Deymi-Dashtebayaz & Parisa Kazemiani-Najafabad, 2019. "Energy, Exergy, Economic, and Environmental analysis for various inlet air cooling methods on Shahid Hashemi-Nezhad gas turbines refinery," Energy & Environment, , vol. 30(3), pages 481-498, May.
    10. Peymani, Alireza & Sadeghi, Jafar & Shahraki, Farhad & Samimi, Abdolreza, 2022. "Connection a vapor jet refrigeration system to a steam injected gas turbine," Energy, Elsevier, vol. 261(PA).
    11. Xu, Shunta & Xi, Liyang & Tian, Songjie & Tu, Yaojie & Chen, Sheng & Zhang, Shihong & Liu, Hao, 2023. "Numerical investigation of pressure and H2O dilution effects on NO formation and reduction pathways in pure hydrogen MILD combustion," Applied Energy, Elsevier, vol. 350(C).
    12. Chitsaz, Ata & Hosseinpour, Javad & Assadi, Mohsen, 2017. "Effect of recycling on the thermodynamic and thermoeconomic performances of SOFC based on trigeneration systems; A comparative study," Energy, Elsevier, vol. 124(C), pages 613-624.
    13. De Paepe, Ward & Delattin, Frank & Bram, Svend & De Ruyck, Jacques, 2012. "Steam injection experiments in a microturbine – A thermodynamic performance analysis," Applied Energy, Elsevier, vol. 97(C), pages 569-576.
    14. Saeed Bahrami & Ali Ghaffari & Marcus Thern, 2013. "Improving the Transient Performance of the Gas Turbine by Steam Injection during Frequency Dips," Energies, MDPI, vol. 6(10), pages 1-14, October.
    15. Maheshwari, Mayank & Singh, Onkar, 2019. "Comparative evaluation of different combined cycle configurations having simple gas turbine, steam turbine and ammonia water turbine," Energy, Elsevier, vol. 168(C), pages 1217-1236.
    16. De Paepe, Ward & Montero Carrero, Marina & Bram, Svend & Contino, Francesco & Parente, Alessandro, 2017. "Waste heat recovery optimization in micro gas turbine applications using advanced humidified gas turbine cycle concepts," Applied Energy, Elsevier, vol. 207(C), pages 218-229.
    17. Farzaneh-Gord, Mahmood & Deymi-Dashtebayaz, Mahdi, 2011. "Effect of various inlet air cooling methods on gas turbine performance," Energy, Elsevier, vol. 36(2), pages 1196-1205.
    18. Zhao, Rongchao & Li, Weihua & Zhuge, Weilin & Zhang, Yangjun & Yin, Yong, 2017. "Numerical study on steam injection in a turbocompound diesel engine for waste heat recovery," Applied Energy, Elsevier, vol. 185(P1), pages 506-518.
    19. Kayadelen, Hasan Kayhan & Ust, Yasin & Bashan, Veysi, 2021. "Thermodynamic performance analysis of state of the art gas turbine cycles with inter-stage turbine reheat and steam injection," Energy, Elsevier, vol. 222(C).
    20. Renzi, Massimiliano & Patuzzi, Francesco & Baratieri, Marco, 2017. "Syngas feed of micro gas turbines with steam injection: Effects on performance, combustion and pollutants formation," Applied Energy, Elsevier, vol. 206(C), pages 697-707.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:84:y:2007:i:1:p:16-28. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.