IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v252y2019ic38.html
   My bibliography  Save this article

Energy efficiency measures in electric motors systems: A novel classification highlighting specific implications in their adoption

Author

Listed:
  • Trianni, Andrea
  • Cagno, Enrico
  • Accordini, Davide

Abstract

Electric motor systems (EMS) cover a remarkable share of industrial power consumption. Despite the wide set of apparently cost-effective opportunities to improve energy efficiency in this cross-cutting technology, often decision-makers do not take them, as the detail for a specific decision can be too high, resulting in an implementation rate quite low. In particular, little knowledge of the features that should be considered when deciding to undertake an action in this area represents a serious hurdle. In many cases, information regarding the characteristics of such energy efficiency measures (EEMs) is quite vague. For this reason, in the present study, we present a thorough overview of EEMs for EMS, basing on an extensive review of scientific and industrial literature. By highlighting their characteristics and productivity benefits, most of which impacting on the adoption decision-making process, we re-categorise EEMs for EMS, offering specific detail over single EEMs and thus support to industrial decision-makers. EEMs are presented according to four main groups, as follows: hardware, motor system drives, management of motors in the plant, and power quality. The novel classification is helpful to support research for the development of a new framework to represent the main factors that affect the adoption of EEMs for EMS. Further, it may help the identification and quantification of productivity benefits for those EEMs. Finally, it could result in a valuable tool offering different perspectives in the decision-making of industrial managers and technology suppliers, as well as industrial policy-makers.

Suggested Citation

  • Trianni, Andrea & Cagno, Enrico & Accordini, Davide, 2019. "Energy efficiency measures in electric motors systems: A novel classification highlighting specific implications in their adoption," Applied Energy, Elsevier, vol. 252(C), pages 1-1.
    • Handle: RePEc:eee:appene:v:252:y:2019:i:c:38
    DOI: 10.1016/j.apenergy.2019.113481
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261919311559
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2019.113481?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Hasanuzzaman, M. & Rahim, N.A. & Saidur, R. & Kazi, S.N., 2011. "Energy savings and emissions reductions for rewinding and replacement of industrial motor," Energy, Elsevier, vol. 36(1), pages 233-240.
    2. Thirugnanasambandam, M. & Hasanuzzaman, M. & Saidur, R. & Ali, M.B. & Rajakarunakaran, S. & Devaraj, D. & Rahim, N.A., 2011. "Analysis of electrical motors load factors and energy savings in an Indian cement industry," Energy, Elsevier, vol. 36(7), pages 4307-4314.
    3. Saidur, R. & Rahim, N.A. & Ping, H.W. & Jahirul, M.I. & Mekhilef, S. & Masjuki, H.H., 2009. "Energy and emission analysis for industrial motors in Malaysia," Energy Policy, Elsevier, vol. 37(9), pages 3650-3658, September.
    4. Anderson, Soren T. & Newell, Richard G., 2004. "Information programs for technology adoption: the case of energy-efficiency audits," Resource and Energy Economics, Elsevier, vol. 26(1), pages 27-50, March.
    5. Garcia, Agenor Gomes Pinto & Szklo, Alexandre S. & Schaeffer, Roberto & McNeil, Michael A., 2007. "Energy-efficiency standards for electric motors in Brazilian industry," Energy Policy, Elsevier, vol. 35(6), pages 3424-3439, June.
    6. Backlund, Sandra & Thollander, Patrik & Palm, Jenny & Ottosson, Mikael, 2012. "Extending the energy efficiency gap," Energy Policy, Elsevier, vol. 51(C), pages 392-396.
    7. de Almeida, Aníbal T & Fonseca, Paula & Bertoldi, Paolo, 2003. "Energy-efficient motor systems in the industrial and in the services sectors in the European Union: characterisation, potentials, barriers and policies," Energy, Elsevier, vol. 28(7), pages 673-690.
    8. Li, Yunhua & Liu, Mingsheng & Lau, Josephine & Zhang, Bei, 2015. "A novel method to determine the motor efficiency under variable speed operations and partial load conditions," Applied Energy, Elsevier, vol. 144(C), pages 234-240.
    9. Hans De Keulenaer, 2004. "Energy Efficient Motor Driven Systems," Energy & Environment, , vol. 15(5), pages 873-905, September.
    10. Zanardo, Rafael Petri & Siluk, Julio Cezar Mairesse & de Souza Savian, Fernando & Schneider, Paulo Smith, 2018. "Energy audit model based on a performance evaluation system," Energy, Elsevier, vol. 154(C), pages 544-552.
    11. Worrell, Ernst & Laitner, John A & Ruth, Michael & Finman, Hodayah, 2003. "Productivity benefits of industrial energy efficiency measures," Energy, Elsevier, vol. 28(11), pages 1081-1098.
    12. Berghout, Niels & Meerman, Hans & van den Broek, Machteld & Faaij, André, 2019. "Assessing deployment pathways for greenhouse gas emissions reductions in an industrial plant – A case study for a complex oil refinery," Applied Energy, Elsevier, vol. 236(C), pages 354-378.
    13. Habib, Mohammad Ahsan & Hasanuzzaman, M. & Hosenuzzaman, M. & Salman, Asif & Mehadi, Md Riyad, 2016. "Energy consumption, energy saving and emission reduction of a garment industrial building in Bangladesh," Energy, Elsevier, vol. 112(C), pages 91-100.
    14. Zuberi, M. Jibran S. & Tijdink, Anton & Patel, Martin K., 2017. "Techno-economic analysis of energy efficiency improvement in electric motor driven systems in Swiss industry," Applied Energy, Elsevier, vol. 205(C), pages 85-104.
    15. García-Gracia, M. & El Halabi, N. & Khodr, H.M. & Sanz, Jose Fco, 2010. "Improvement of large scale solar installation model for ground current analysis," Applied Energy, Elsevier, vol. 87(11), pages 3467-3474, November.
    16. Du Plessis, Gideon Edgar & Liebenberg, Leon & Mathews, Edward Henry, 2013. "The use of variable speed drives for cost-effective energy savings in South African mine cooling systems," Applied Energy, Elsevier, vol. 111(C), pages 16-27.
    17. Hassanpour Isfahani, Arash & Vaez-Zadeh, Sadegh, 2009. "Line start permanent magnet synchronous motors: Challenges and opportunities," Energy, Elsevier, vol. 34(11), pages 1755-1763.
    18. Bühler, Fabian & Guminski, Andrej & Gruber, Anna & Nguyen, Tuong-Van & von Roon, Serafin & Elmegaard, Brian, 2018. "Evaluation of energy saving potentials, costs and uncertainties in the chemical industry in Germany," Applied Energy, Elsevier, vol. 228(C), pages 2037-2049.
    19. Shi, Xunpeng, 2015. "Application of best practice for setting minimum energy efficiency standards in technically disadvantaged countries: Case study of Air Conditioners in Brunei Darussalam," Applied Energy, Elsevier, vol. 157(C), pages 1-12.
    20. Trianni, Andrea & Cagno, Enrico & Farné, Stefano, 2016. "Barriers, drivers and decision-making process for industrial energy efficiency: A broad study among manufacturing small and medium-sized enterprises," Applied Energy, Elsevier, vol. 162(C), pages 1537-1551.
    21. Cagno, E. & Worrell, E. & Trianni, A. & Pugliese, G., 2013. "A novel approach for barriers to industrial energy efficiency," Renewable and Sustainable Energy Reviews, Elsevier, vol. 19(C), pages 290-308.
    22. Fleiter, Tobias & Hirzel, Simon & Worrell, Ernst, 2012. "The characteristics of energy-efficiency measures – a neglected dimension," Energy Policy, Elsevier, vol. 51(C), pages 502-513.
    23. Sola, Antonio Vanderley Herrero & Xavier, Antonio Augusto de Paula, 2007. "Organizational human factors as barriers to energy efficiency in electrical motors systems in industry," Energy Policy, Elsevier, vol. 35(11), pages 5784-5794, November.
    24. Trianni, Andrea & Cagno, Enrico & De Donatis, Alessio, 2014. "A framework to characterize energy efficiency measures," Applied Energy, Elsevier, vol. 118(C), pages 207-220.
    25. Lu, Shyi-Min, 2016. "A review of high-efficiency motors: Specification, policy, and technology," Renewable and Sustainable Energy Reviews, Elsevier, vol. 59(C), pages 1-12.
    26. Eti, M.C. & Ogaji, S.O.T. & Probert, S.D., 2006. "Development and implementation of preventive-maintenance practices in Nigerian industries," Applied Energy, Elsevier, vol. 83(10), pages 1163-1179, October.
    27. Trianni, A. & Cagno, E., 2012. "Dealing with barriers to energy efficiency and SMEs: Some empirical evidences," Energy, Elsevier, vol. 37(1), pages 494-504.
    28. Akbaba, Mehmet, 1999. "Energy conservation by using energy efficient electric motors," Applied Energy, Elsevier, vol. 64(1-4), pages 149-158, September.
    29. Bui, Duong Minh & Chen, Shi-Lin & Lien, Keng-Yu & Chang, Yung-Ruei & Lee, Yih-Der & Jiang, Jheng-Lun, 2017. "Investigation on transient behaviours of a uni-grounded low-voltage AC microgrid and evaluation on its available fault protection methods: Review and proposals," Renewable and Sustainable Energy Reviews, Elsevier, vol. 75(C), pages 1417-1452.
    30. Saidur, R. & Mekhilef, S., 2010. "Energy use, energy savings and emission analysis in the Malaysian rubber producing industries," Applied Energy, Elsevier, vol. 87(8), pages 2746-2758, August.
    31. Saidur, R. & Mahlia, T.M.I., 2010. "Energy, economic and environmental benefits of using high-efficiency motors to replace standard motors for the Malaysian industries," Energy Policy, Elsevier, vol. 38(8), pages 4617-4625, August.
    32. Carpinelli, G. & Mottola, F. & Proto, D. & Varilone, P., 2017. "Minimizing unbalances in low-voltage microgrids: Optimal scheduling of distributed resources," Applied Energy, Elsevier, vol. 191(C), pages 170-182.
    33. Burgos Payán, Manuel & Roldan Fernandez, Juan Manuel & Maza Ortega, Jose Maria & Riquelme Santos, Jesus Manuel, 2019. "Techno-economic optimal power rating of induction motors," Applied Energy, Elsevier, vol. 240(C), pages 1031-1048.
    34. Ni, Chun Chun, 2013. "Potential energy savings and reduction of CO2 emissions through higher efficiency standards for polyphase electric motors in Japan," Energy Policy, Elsevier, vol. 52(C), pages 737-747.
    35. Quan, Junlong & Kim, Se-Heon & Kim, Ju-Hyung, 2018. "A study on probabilistic social cost–benefit analysis to introduce high-efficiency motors into subway station ventilation," Energy Policy, Elsevier, vol. 121(C), pages 92-100.
    36. Abdelaziz, E.A. & Saidur, R. & Mekhilef, S., 2011. "A review on energy saving strategies in industrial sector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(1), pages 150-168, January.
    37. Benedetti, Miriam & Bonfa', Francesca & Bertini, Ilaria & Introna, Vito & Ubertini, Stefano, 2018. "Explorative study on Compressed Air Systems’ energy efficiency in production and use: First steps towards the creation of a benchmarking system for large and energy-intensive industrial firms," Applied Energy, Elsevier, vol. 227(C), pages 436-448.
    38. Sola, Antonio Vanderley Herrero & Mota, Caroline Maria de Miranda & Kovaleski, João Luiz, 2011. "A model for improving energy efficiency in industrial motor system using multicriteria analysis," Energy Policy, Elsevier, vol. 39(6), pages 3645-3654, June.
    39. Moreno-Munoz, A. & Rosa, Juan José González de la & Flores-Arias, J.M. & Bellido-Outerino, F.J. & Gil-de-Castro, A., 2011. "Energy efficiency criteria in uninterruptible power supply selection," Applied Energy, Elsevier, vol. 88(4), pages 1312-1321, April.
    40. Yang, Ming, 2009. "Air compressor efficiency in a Vietnamese enterprise," Energy Policy, Elsevier, vol. 37(6), pages 2327-2337, June.
    41. Sutikno, Tole & Idris, Nik Rumzi Nik & Jidin, Auzani, 2014. "A review of direct torque control of induction motors for sustainable reliability and energy efficient drives," Renewable and Sustainable Energy Reviews, Elsevier, vol. 32(C), pages 548-558.
    42. Smith, Lucy & Ibn-Mohammed, Taofeeq & Koh, S.C. Lenny & Reaney, Ian M., 2018. "Life cycle assessment and environmental profile evaluations of high volumetric efficiency capacitors," Applied Energy, Elsevier, vol. 220(C), pages 496-513.
    43. Saidur, R., 2010. "A review on electrical motors energy use and energy savings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(3), pages 877-898, April.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Boscariol, Paolo & Richiedei, Dario, 2022. "Energy optimal design of servo-actuated systems: A concurrent approach based on scaling rules," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).
    2. Mabrouki Jamal, 2022. "Mathematical Modelling of Biogas Production in a Controlled Landfill: Characterization, Valorization Study and Energy Potential," Sustainability, MDPI, vol. 14(23), pages 1-15, November.
    3. Chiweta E. Abunike & Udochukwu B. Akuru & Ogbonnaya I. Okoro & Chukwuemeka C. Awah, 2023. "Sizing, Modeling, and Performance Comparison of Squirrel-Cage Induction and Wound-Field Flux Switching Motors," Mathematics, MDPI, vol. 11(16), pages 1-24, August.
    4. Ahmed, Abdelsalam A. & Ramadan, Haitham S., 2020. "Prototype implementation of advanced electric vehicles drivetrain system: Verification and validation," Applied Energy, Elsevier, vol. 266(C).
    5. Accordini, D. & Cagno, E. & Trianni, A., 2021. "Identification and characterization of decision-making factors over industrial energy efficiency measures in electric motor systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 149(C).
    6. Gómez, Julio R. & Sousa, Vladimir & Cabello Eras, Juan J. & Sagastume Gutiérrez, Alexis & Viego, Percy R. & Quispe, Enrique C. & de León, Gabriel, 2022. "Assessment criteria of the feasibility of replacement standard efficiency electric motors with high-efficiency motors," Energy, Elsevier, vol. 239(PA).
    7. Cagno, Enrico & Accordini, Davide & Trianni, Andrea & Katic, Mile & Ferrari, Nicolò & Gambaro, Federico, 2022. "Understanding the impacts of energy efficiency measures on a Company’s operational performance: A new framework," Applied Energy, Elsevier, vol. 328(C).
    8. Fábio de Oliveira Neves & Henrique Ewbank & José Arnaldo Frutuoso Roveda & Andrea Trianni & Fernando Pinhabel Marafão & Sandra Regina Monteiro Masalskiene Roveda, 2022. "Economic and Production-Related Implications for Industrial Energy Efficiency: A Logistic Regression Analysis on Cross-Cutting Technologies," Energies, MDPI, vol. 15(4), pages 1-19, February.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Burgos Payán, Manuel & Roldan Fernandez, Juan Manuel & Maza Ortega, Jose Maria & Riquelme Santos, Jesus Manuel, 2019. "Techno-economic optimal power rating of induction motors," Applied Energy, Elsevier, vol. 240(C), pages 1031-1048.
    2. Andrea Trianni & Davide Accordini & Enrico Cagno, 2020. "Identification and Categorization of Factors Affecting the Adoption of Energy Efficiency Measures within Compressed Air Systems," Energies, MDPI, vol. 13(19), pages 1-51, October.
    3. Accordini, D. & Cagno, E. & Trianni, A., 2021. "Identification and characterization of decision-making factors over industrial energy efficiency measures in electric motor systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 149(C).
    4. Singh, Gurmeet & Anil Kumar, T.Ch. & Naikan, V.N.A., 2019. "Efficiency monitoring as a strategy for cost effective maintenance of induction motors for minimizing carbon emission and energy consumption," Reliability Engineering and System Safety, Elsevier, vol. 184(C), pages 193-201.
    5. Cagno, Enrico & Accordini, Davide & Trianni, Andrea & Katic, Mile & Ferrari, Nicolò & Gambaro, Federico, 2022. "Understanding the impacts of energy efficiency measures on a Company’s operational performance: A new framework," Applied Energy, Elsevier, vol. 328(C).
    6. A S M Monjurul Hasan & Andrea Trianni, 2020. "A Review of Energy Management Assessment Models for Industrial Energy Efficiency," Energies, MDPI, vol. 13(21), pages 1-21, November.
    7. Thirugnanasambandam, M. & Hasanuzzaman, M. & Saidur, R. & Ali, M.B. & Rajakarunakaran, S. & Devaraj, D. & Rahim, N.A., 2011. "Analysis of electrical motors load factors and energy savings in an Indian cement industry," Energy, Elsevier, vol. 36(7), pages 4307-4314.
    8. Werner König & Sabine Löbbe & Stefan Büttner & Christian Schneider, 2020. "Establishing Energy Efficiency—Drivers for Energy Efficiency in German Manufacturing Small- and Medium-Sized Enterprises," Energies, MDPI, vol. 13(19), pages 1-31, October.
    9. Mette Talseth Solnørdal & Lene Foss, 2018. "Closing the Energy Efficiency Gap—A Systematic Review of Empirical Articles on Drivers to Energy Efficiency in Manufacturing Firms," Energies, MDPI, vol. 11(3), pages 1-30, February.
    10. Trianni, Andrea & Cagno, Enrico & De Donatis, Alessio, 2014. "A framework to characterize energy efficiency measures," Applied Energy, Elsevier, vol. 118(C), pages 207-220.
    11. Fábio de Oliveira Neves & Henrique Ewbank & José Arnaldo Frutuoso Roveda & Andrea Trianni & Fernando Pinhabel Marafão & Sandra Regina Monteiro Masalskiene Roveda, 2022. "Economic and Production-Related Implications for Industrial Energy Efficiency: A Logistic Regression Analysis on Cross-Cutting Technologies," Energies, MDPI, vol. 15(4), pages 1-19, February.
    12. Zuberi, M. Jibran S. & Tijdink, Anton & Patel, Martin K., 2017. "Techno-economic analysis of energy efficiency improvement in electric motor driven systems in Swiss industry," Applied Energy, Elsevier, vol. 205(C), pages 85-104.
    13. Prince, & Hati, Ananda Shankar, 2021. "A comprehensive review of energy-efficiency of ventilation system using Artificial Intelligence," Renewable and Sustainable Energy Reviews, Elsevier, vol. 146(C).
    14. Cagno, E. & Worrell, E. & Trianni, A. & Pugliese, G., 2013. "A novel approach for barriers to industrial energy efficiency," Renewable and Sustainable Energy Reviews, Elsevier, vol. 19(C), pages 290-308.
    15. Safarzadeh, Soroush & Rasti-Barzoki, Morteza & Hejazi, Seyed Reza, 2020. "A review of optimal energy policy instruments on industrial energy efficiency programs, rebound effects, and government policies," Energy Policy, Elsevier, vol. 139(C).
    16. Perroni, Marcos G. & Gouvea da Costa, Sergio E. & Pinheiro de Lima, Edson & Vieira da Silva, Wesley, 2017. "The relationship between enterprise efficiency in resource use and energy efficiency practices adoption," International Journal of Production Economics, Elsevier, vol. 190(C), pages 108-119.
    17. Solnørdal, Mette Talseth & Thyholdt, Sverre Braathen, 2019. "Absorptive capacity and energy efficiency in manufacturing firms – An empirical analysis in Norway," Energy Policy, Elsevier, vol. 132(C), pages 978-990.
    18. Nehler, Therese, 2018. "Linking energy efficiency measures in industrial compressed air systems with non-energy benefits – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 89(C), pages 72-87.
    19. Hasan, A S M Monjurul & Tuhin, Rashedul Amin & Ullah, Mahfuz & Sakib, Taiyeb Hasan & Thollander, Patrik & Trianni, Andrea, 2021. "A comprehensive investigation of energy management practices within energy intensive industries in Bangladesh," Energy, Elsevier, vol. 232(C).
    20. Saidur, R. & Hasanuzzaman, M. & Yogeswaran, S. & Mohammed, H.A. & Hossain, M.S., 2010. "An end-use energy analysis in a Malaysian public hospital," Energy, Elsevier, vol. 35(12), pages 4780-4785.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:252:y:2019:i:c:38. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.