IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v87y2010i8p2746-2758.html
   My bibliography  Save this article

Energy use, energy savings and emission analysis in the Malaysian rubber producing industries

Author

Listed:
  • Saidur, R.
  • Mekhilef, S.

Abstract

In this paper an analysis of energy use and energy conservation in the Malaysian rubber producing industries is presented. It has been found that rubber industries consume a substantial amount of energy. Excessive use of energy is usually associated with many industrial plants worldwide, and rubber plants are no exception. This study is based on the realization that enormous potential exists for cost-effective improvements in the existing energy-using equipment. Through the method of a walkthrough energy audit, power rating, operation time of energy-consuming equipment/machineries and power factor were collected. The data were then analyzed to investigate the breakdown of end-use equipment/machineries energy use. The results of the energy audit in the Malaysian rubber and rubber producing industries showed that the electric motor accounts for a major fraction of total energy consumption followed by pumps, heaters, cooling systems and lighting. Since the electric motor takes up a substantial amount of the total energy used in rubber industries, energy-savings strategies such as the use of high efficient motors, and variable speed drive (VSD) have been used to reduce energy consumption of motors used in rubber industries. Energy-savings strategies for compressed-air systems, boilers, and chillers have also been applied to estimate energy and cost savings. It has been found that significant amount of energy and; utility bills can be saved along with the reduction of emission by applying the foretold strategies for energy using machineries in the rubber industries.

Suggested Citation

  • Saidur, R. & Mekhilef, S., 2010. "Energy use, energy savings and emission analysis in the Malaysian rubber producing industries," Applied Energy, Elsevier, vol. 87(8), pages 2746-2758, August.
    • Handle: RePEc:eee:appene:v:87:y:2010:i:8:p:2746-2758
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306-2619(09)00555-8
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kelly Kissock, J. & Eger, Carl, 2008. "Measuring industrial energy savings," Applied Energy, Elsevier, vol. 85(5), pages 347-361, May.
    2. Fromme, JW, 1996. "Energy conservation in the Russian manufacturing industry. Potentials and obstacles," Energy Policy, Elsevier, vol. 24(3), pages 245-252, March.
    3. Tam, K. W. & Leung, C. W. & Probert, S. D., 1989. "Energy management in a dairy-products plant," Applied Energy, Elsevier, vol. 32(2), pages 83-100.
    4. Garcia, Agenor Gomes Pinto & Szklo, Alexandre S. & Schaeffer, Roberto & McNeil, Michael A., 2007. "Energy-efficiency standards for electric motors in Brazilian industry," Energy Policy, Elsevier, vol. 35(6), pages 3424-3439, June.
    5. Ghaddar, Nesreen & Mezher, Toufic, 1999. "Modeling of current and future energyintensity and greenhouse gas emissions ofthe Lebanese industrial sector: assessmentof mitigation options," Applied Energy, Elsevier, vol. 63(1), pages 53-74, May.
    6. Thollander, Patrik & Karlsson, Magnus & Söderström, Mats & Creutz, Dan, 2005. "Reducing industrial energy costs through energy-efficiency measures in a liberalized European electricity market: case study of a Swedish iron foundry," Applied Energy, Elsevier, vol. 81(2), pages 115-126, June.
    7. Yang, Ming, 2006. "Demand side management in Nepal," Energy, Elsevier, vol. 31(14), pages 2677-2698.
    8. Ozturk, Harun Kemal, 2005. "Energy usage and cost in textile industry: A case study for Turkey," Energy, Elsevier, vol. 30(13), pages 2424-2446.
    9. Tekasakul, Perapong & Promtong, Machimontorn, 2008. "Energy efficiency enhancement of natural rubber smoking process by flow improvement using a CFD technique," Applied Energy, Elsevier, vol. 85(9), pages 878-895, September.
    10. Akbaba, Mehmet, 1999. "Energy conservation by using energy efficient electric motors," Applied Energy, Elsevier, vol. 64(1-4), pages 149-158, September.
    11. Chan, David Yih-Liang & Yang, Kuang-Han & Hsu, Chung-Hsuan & Chien, Min-Hsien & Hong, Gui-Bing, 2007. "Current situation of energy conservation in high energy-consuming industries in Taiwan," Energy Policy, Elsevier, vol. 35(1), pages 202-209, January.
    12. Ibrik, Imad H. & Mahmoud, Marwan M., 2005. "Energy efficiency improvement procedures and audit results of electrical, thermal and solar applications in Palestine," Energy Policy, Elsevier, vol. 33(5), pages 651-658, March.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Saidur, R. & Rahim, N.A. & Ping, H.W. & Jahirul, M.I. & Mekhilef, S. & Masjuki, H.H., 2009. "Energy and emission analysis for industrial motors in Malaysia," Energy Policy, Elsevier, vol. 37(9), pages 3650-3658, September.
    2. Saidur, R., 2010. "A review on electrical motors energy use and energy savings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(3), pages 877-898, April.
    3. Saidur, R. & Rahim, N.A. & Masjuki, H.H. & Mekhilef, S. & Ping, H.W. & Jamaluddin, M.F., 2009. "End-use energy analysis in the Malaysian industrial sector," Energy, Elsevier, vol. 34(2), pages 153-158.
    4. Saidur, R. & Rahim, N.A. & Hasanuzzaman, M., 2010. "A review on compressed-air energy use and energy savings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(4), pages 1135-1153, May.
    5. Hong, Gui-Bing & Ma, Chih-Ming & Chen, Hua-Wei & Chuang, Kai-Jen & Chang, Chang-Tang & Su, Te-Li, 2011. "Energy flow analysis in pulp and paper industry," Energy, Elsevier, vol. 36(5), pages 3063-3068.
    6. Hong, Gui-Bing & Su, Te-Li & Lee, Jenq-Daw & Hsu, Tsung-Chi & Chen, Hua-Wei, 2010. "Energy conservation potential in Taiwanese textile industry," Energy Policy, Elsevier, vol. 38(11), pages 7048-7053, November.
    7. Renato M. Lazzarin & Marco Noro, 2017. "Energy efficiency opportunities in the service plants of cast iron foundries in Italy," International Journal of Low-Carbon Technologies, Oxford University Press, vol. 12(2), pages 96-109.
    8. Aranda-Usón, Alfonso & Ferreira, Germán & Mainar-Toledo, M.D. & Scarpellini, Sabina & Llera Sastresa, Eva, 2012. "Energy consumption analysis of Spanish food and drink, textile, chemical and non-metallic mineral products sectors," Energy, Elsevier, vol. 42(1), pages 477-485.
    9. Thirugnanasambandam, M. & Hasanuzzaman, M. & Saidur, R. & Ali, M.B. & Rajakarunakaran, S. & Devaraj, D. & Rahim, N.A., 2011. "Analysis of electrical motors load factors and energy savings in an Indian cement industry," Energy, Elsevier, vol. 36(7), pages 4307-4314.
    10. Li, Yingjian & Li, Jiezhi & Qiu, Qi & Xu, Yafei, 2010. "Energy auditing and energy conservation potential for glass works," Applied Energy, Elsevier, vol. 87(8), pages 2438-2446, August.
    11. Chan, David Yih-Liang & Yang, Kuang-Han & Hsu, Chung-Hsuan & Chien, Min-Hsien & Hong, Gui-Bing, 2007. "Current situation of energy conservation in high energy-consuming industries in Taiwan," Energy Policy, Elsevier, vol. 35(1), pages 202-209, January.
    12. Yih-Liang Chan, David & Yang, Kuang-Han & Lee, Jenq-Daw & Hong, Gui-Bing, 2010. "The case study of furnace use and energy conservation in iron and steel industry," Energy, Elsevier, vol. 35(4), pages 1665-1670.
    13. Saidur, R. & Mahlia, T.M.I., 2010. "Energy, economic and environmental benefits of using high-efficiency motors to replace standard motors for the Malaysian industries," Energy Policy, Elsevier, vol. 38(8), pages 4617-4625, August.
    14. Hasanuzzaman, M. & Rahim, N.A. & Saidur, R. & Kazi, S.N., 2011. "Energy savings and emissions reductions for rewinding and replacement of industrial motor," Energy, Elsevier, vol. 36(1), pages 233-240.
    15. Sreekanth, K.J., 2016. "Review on integrated strategies for energy policy planning and evaluation of GHG mitigation alternatives," Renewable and Sustainable Energy Reviews, Elsevier, vol. 64(C), pages 837-850.
    16. Bortoni, Edson C. & Magalhães, Leonardo P. & Nogueira, Luiz A.H. & Bajay, Sérgio V. & Cassula, Agnelo M., 2020. "An assessment of energy efficient motors application by scenarios evaluation," Energy Policy, Elsevier, vol. 140(C).
    17. Lee, Dasheng & Cheng, Chin-Chi, 2016. "Energy savings by energy management systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 760-777.
    18. Su, Te-Li & Chan, David Yih-Liang & Hung, Ching-Yuan & Hong, Gui-Bing, 2013. "The status of energy conservation in Taiwan's cement industry," Energy Policy, Elsevier, vol. 60(C), pages 481-486.
    19. Thollander, Patrik & Backlund, Sandra & Trianni, Andrea & Cagno, Enrico, 2013. "Beyond barriers – A case study on driving forces for improved energy efficiency in the foundry industries in Finland, France, Germany, Italy, Poland, Spain, and Sweden," Applied Energy, Elsevier, vol. 111(C), pages 636-643.
    20. Singh, Gurmeet & Anil Kumar, T.Ch. & Naikan, V.N.A., 2019. "Efficiency monitoring as a strategy for cost effective maintenance of induction motors for minimizing carbon emission and energy consumption," Reliability Engineering and System Safety, Elsevier, vol. 184(C), pages 193-201.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:87:y:2010:i:8:p:2746-2758. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.