IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v36y2011i7p4307-4314.html
   My bibliography  Save this article

Analysis of electrical motors load factors and energy savings in an Indian cement industry

Author

Listed:
  • Thirugnanasambandam, M.
  • Hasanuzzaman, M.
  • Saidur, R.
  • Ali, M.B.
  • Rajakarunakaran, S.
  • Devaraj, D.
  • Rahim, N.A.

Abstract

Electric motors consume in between 30% and 80% of the total industrial energy use for few selected countries around the world. It was identified that many motors are operated under loaded conditions. In some cases, motors are operated even at 3–16% of their full loads. These low loads can be optimized with the application of variable speed drives (VSD) to match the load requirements. Based on the estimation, it has been found that annually about 1,865,925MWh of energy can be saved for 60% speed reduction when VSDs are used. It was also found that about 2,122,675tons CO2emission could be avoided annually by using VSDs for Low Tension (LT) motors for 60% speed reduction. It was also estimated that annually about 4,600,386MWh of energy can be saved for High Tension (HT) motors for 60% speed reduction using VSDs. The average payback period (PBP) for implementing VSDs for LT and HT motors found to be very low (i.e. about 2 days). In this particular study it is observed that installing both LT and HT capacitors to improve power factor found to be not economically viable owing to low level of energy savings.

Suggested Citation

  • Thirugnanasambandam, M. & Hasanuzzaman, M. & Saidur, R. & Ali, M.B. & Rajakarunakaran, S. & Devaraj, D. & Rahim, N.A., 2011. "Analysis of electrical motors load factors and energy savings in an Indian cement industry," Energy, Elsevier, vol. 36(7), pages 4307-4314.
    • Handle: RePEc:eee:energy:v:36:y:2011:i:7:p:4307-4314
    DOI: 10.1016/j.energy.2011.04.011
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S036054421100260X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2011.04.011?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Al-Ghandoor, A. & Al-Hinti, I. & Jaber, J.O. & Sawalha, S.A., 2008. "Electricity consumption and associated GHG emissions of the Jordanian industrial sector: Empirical analysis and future projection," Energy Policy, Elsevier, vol. 36(1), pages 258-267, January.
    2. Parikh, Jyoti & Parikh, Kirit, 2011. "India’s energy needs and low carbon options," Energy, Elsevier, vol. 36(6), pages 3650-3658.
    3. Yang, Ming, 2006. "Energy efficiency policy impact in India: case study of investment in industrial energy efficiency," Energy Policy, Elsevier, vol. 34(17), pages 3104-3114, November.
    4. Mahlia, T. M. I. & Masjuki, H. H. & Saidur, R. & Amalina, M. A., 2004. "Cost-benefit analysis of implementing minimum energy efficiency standards for household refrigerator-freezers in Malaysia," Energy Policy, Elsevier, vol. 32(16), pages 1819-1824, November.
    5. Hasanuzzaman, M. & Rahim, N.A. & Saidur, R. & Kazi, S.N., 2011. "Energy savings and emissions reductions for rewinding and replacement of industrial motor," Energy, Elsevier, vol. 36(1), pages 233-240.
    6. Saidur, R., 2009. "Energy consumption, energy savings, and emission analysis in Malaysian office buildings," Energy Policy, Elsevier, vol. 37(10), pages 4104-4113, October.
    7. Kumar Mandal, Sabuj & Madheswaran, S., 2010. "Environmental efficiency of the Indian cement industry: An interstate analysis," Energy Policy, Elsevier, vol. 38(2), pages 1108-1118, February.
    8. de Almeida, Aníbal T & Fonseca, Paula & Bertoldi, Paolo, 2003. "Energy-efficient motor systems in the industrial and in the services sectors in the European Union: characterisation, potentials, barriers and policies," Energy, Elsevier, vol. 28(7), pages 673-690.
    9. Mecrow, B.C. & Jack, A.G., 2008. "Efficiency trends in electric machines and drives," Energy Policy, Elsevier, vol. 36(12), pages 4336-4341, December.
    10. Mandal, Sabuj Kumar, 2010. "Do undesirable output and environmental regulation matter in energy efficiency analysis? Evidence from Indian Cement Industry," Energy Policy, Elsevier, vol. 38(10), pages 6076-6083, October.
    11. Akbaba, Mehmet, 1999. "Energy conservation by using energy efficient electric motors," Applied Energy, Elsevier, vol. 64(1-4), pages 149-158, September.
    12. Saidur, R. & Masjuki, H.H. & Jamaluddin, M.Y. & Ahmed, S., 2007. "Energy and associated greenhouse gas emissions from household appliances in Malaysia," Energy Policy, Elsevier, vol. 35(3), pages 1648-1657, March.
    13. Garcia, Agenor Gomes Pinto & Szklo, Alexandre S. & Schaeffer, Roberto & McNeil, Michael A., 2007. "Energy-efficiency standards for electric motors in Brazilian industry," Energy Policy, Elsevier, vol. 35(6), pages 3424-3439, June.
    14. Sathaye, Jayant & Phadke, Amol, 2006. "Cost of electric power sector carbon mitigation in India: international implications," Energy Policy, Elsevier, vol. 34(13), pages 1619-1629, September.
    15. Ozturk, Harun Kemal, 2005. "Energy usage and cost in textile industry: A case study for Turkey," Energy, Elsevier, vol. 30(13), pages 2424-2446.
    16. Dutta, Monica & Mukherjee, Saptarshi, 2010. "An outlook into energy consumption in large scale industries in India: The cases of steel, aluminium and cement," Energy Policy, Elsevier, vol. 38(11), pages 7286-7298, November.
    17. Mongia, Nandita & Sathaye, Jayant & Mongia, Puran, 1994. "Energy use and carbon implications in India Focus on industry," Energy Policy, Elsevier, vol. 22(11), pages 894-906, November.
    18. Gielen, Dolf & Taylor, Peter, 2009. "Indicators for industrial energy efficiency in India," Energy, Elsevier, vol. 34(8), pages 962-969.
    19. Mongia, Puran & Schumacher, Katja & Sathaye, Jayant, 2001. "Policy reforms and productivity growth in India's energy intensive industries," Energy Policy, Elsevier, vol. 29(9), pages 715-724, July.
    20. Saidur, R., 2010. "A review on electrical motors energy use and energy savings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(3), pages 877-898, April.
    21. Madlool, N.A. & Saidur, R. & Hossain, M.S. & Rahim, N.A., 2011. "A critical review on energy use and savings in the cement industries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(4), pages 2042-2060, May.
    22. Saidur, R. & Rahim, N.A. & Ping, H.W. & Jahirul, M.I. & Mekhilef, S. & Masjuki, H.H., 2009. "Energy and emission analysis for industrial motors in Malaysia," Energy Policy, Elsevier, vol. 37(9), pages 3650-3658, September.
    23. Saidur, R. & Hasanuzzaman, M. & Yogeswaran, S. & Mohammed, H.A. & Hossain, M.S., 2010. "An end-use energy analysis in a Malaysian public hospital," Energy, Elsevier, vol. 35(12), pages 4780-4785.
    24. Mathur, Ritu & Chand, Sharat & Tezuka, Tetsuo, 2003. "Optimal use of coal for power generation in India," Energy Policy, Elsevier, vol. 31(4), pages 319-331, March.
    25. Saidur, R. & Mekhilef, S., 2010. "Energy use, energy savings and emission analysis in the Malaysian rubber producing industries," Applied Energy, Elsevier, vol. 87(8), pages 2746-2758, August.
    26. Al-Mansour, Fouad & Merse, Stane & Tomsic, Miha, 2003. "Comparison of energy efficiency strategies in the industrial sector of Slovenia," Energy, Elsevier, vol. 28(5), pages 421-440.
    27. Mathur, Jyotirmay & Bansal, Narendra Kumar & Wagner, Hermann. -Joseph, 2003. "Investigation of greenhouse gas reduction potential and change in technological selection in Indian power sector," Energy Policy, Elsevier, vol. 31(12), pages 1235-1244, September.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Söğüt, Z. & Oktay, Z. & Karakoc, H. & Hepbasli, A., 2012. "Investigation of environmental and exergetic performance for coal-preparation units in cement production processes," Energy, Elsevier, vol. 46(1), pages 72-77.
    2. Singh, Gurmeet & Anil Kumar, T.Ch. & Naikan, V.N.A., 2019. "Efficiency monitoring as a strategy for cost effective maintenance of induction motors for minimizing carbon emission and energy consumption," Reliability Engineering and System Safety, Elsevier, vol. 184(C), pages 193-201.
    3. Sauer, Ildo L. & Tatizawa, Hédio & Salotti, Francisco A.M. & Mercedes, Sonia S., 2015. "A comparative assessment of Brazilian electric motors performance with minimum efficiency standards," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 308-318.
    4. Khan Rahmat Ullah & Marudhappan Thirugnanasambandam & Rahman Saidur & Kazi Akikur Rahman & Md. Riaz Kayser, 2021. "Analysis of Energy Use and Energy Savings: A Case Study of a Condiment Industry in India," Energies, MDPI, vol. 14(16), pages 1-25, August.
    5. Boharb, A. & Allouhi, A. & Saidur, R. & Kousksou, T. & Jamil, A. & Mourad, Y. & Benbassou, A., 2016. "Auditing and analysis of energy consumption of an industrial site in Morocco," Energy, Elsevier, vol. 101(C), pages 332-342.
    6. Mantas Plienis & Tomas Deveikis & Audrius Jonaitis & Saulius Gudžius, 2023. "Design of IOT-Based Framework for Evaluation of Energy Efficiency in Power Transformers," Energies, MDPI, vol. 16(11), pages 1-15, May.
    7. Sucic, Boris & Al-Mansour, Fouad & Pusnik, Matevz & Vuk, Tomaz, 2016. "Context sensitive production planning and energy management approach in energy intensive industries," Energy, Elsevier, vol. 108(C), pages 63-73.
    8. Chuang, Ho-Chiao & Li, Guan-De & Lee, Chen-Ta, 2019. "The efficiency improvement of AC induction motor with constant frequency technology," Energy, Elsevier, vol. 174(C), pages 805-813.
    9. Du Plessis, Gideon Edgar & Liebenberg, Leon & Mathews, Edward Henry, 2013. "The use of variable speed drives for cost-effective energy savings in South African mine cooling systems," Applied Energy, Elsevier, vol. 111(C), pages 16-27.
    10. Huang, Lizhen & Krigsvoll, Guri & Johansen, Fred & Liu, Yongping & Zhang, Xiaoling, 2018. "Carbon emission of global construction sector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P2), pages 1906-1916.
    11. Saidur, R. & Hasanuzzaman, M. & Mahlia, T.M.I. & Rahim, N.A. & Mohammed, H.A., 2011. "Chillers energy consumption, energy savings and emission analysis in an institutional buildings," Energy, Elsevier, vol. 36(8), pages 5233-5238.
    12. El-Kharashi, Eyhab, 2014. "Detailed comparative study regarding different formulae of predicting the iron losses in a machine excited by non-sinusoidal supply," Energy, Elsevier, vol. 73(C), pages 513-522.
    13. DeBenedictis, A. & Haley, B. & Woo, C.K. & Cutter, E., 2013. "Operational energy-efficiency improvement of municipal water pumping in California," Energy, Elsevier, vol. 53(C), pages 237-243.
    14. Ahmed, Ferdous & Al Amin, Abul Quasem & Hasanuzzaman, M. & Saidur, R., 2013. "Alternative energy resources in Bangladesh and future prospect," Renewable and Sustainable Energy Reviews, Elsevier, vol. 25(C), pages 698-707.
    15. Al-Ghandoor, A., 2012. "Analysis of Jordan's industrial energy intensity and potential mitigations of energy and GHGs emissions," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(7), pages 4479-4490.
    16. Bosu, Issa & Mahmoud, Hatem & Hassan, Hamdy, 2023. "Energy audit and management of an industrial site based on energy efficiency, economic, and environmental analysis," Applied Energy, Elsevier, vol. 333(C).
    17. Sánchez, Gustavo Crespo & Monteagudo Yanes, José Pedro & Pérez, Milagros Montesino & Cabrera Sánchez, Jorge Luis & Padrón, Arturo Padrón & Haeseldonckx, Dries, 2020. "Efficiency in electromechanical drive motors and energy performance indicators for implementing a management system in balanced animal feed manufacturing," Energy, Elsevier, vol. 194(C).
    18. Burgos Payán, Manuel & Roldan Fernandez, Juan Manuel & Maza Ortega, Jose Maria & Riquelme Santos, Jesus Manuel, 2019. "Techno-economic optimal power rating of induction motors," Applied Energy, Elsevier, vol. 240(C), pages 1031-1048.
    19. Prince, & Hati, Ananda Shankar, 2021. "A comprehensive review of energy-efficiency of ventilation system using Artificial Intelligence," Renewable and Sustainable Energy Reviews, Elsevier, vol. 146(C).
    20. Trianni, Andrea & Cagno, Enrico & Accordini, Davide, 2019. "Energy efficiency measures in electric motors systems: A novel classification highlighting specific implications in their adoption," Applied Energy, Elsevier, vol. 252(C), pages 1-1.
    21. Ali, Muhammad Khurram & Nasir, Alishba & Abbasi, Kainat Jamil & Sajid, Muhammad, 2024. "A comparative multidimensional evaluation of parameters and alternatives for transformation of sustainable cement production in Pakistan," Socio-Economic Planning Sciences, Elsevier, vol. 93(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Saidur, R. & Mahlia, T.M.I., 2010. "Energy, economic and environmental benefits of using high-efficiency motors to replace standard motors for the Malaysian industries," Energy Policy, Elsevier, vol. 38(8), pages 4617-4625, August.
    2. Hasanuzzaman, M. & Rahim, N.A. & Saidur, R. & Kazi, S.N., 2011. "Energy savings and emissions reductions for rewinding and replacement of industrial motor," Energy, Elsevier, vol. 36(1), pages 233-240.
    3. Saidur, R., 2010. "A review on electrical motors energy use and energy savings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(3), pages 877-898, April.
    4. Khan Rahmat Ullah & Marudhappan Thirugnanasambandam & Rahman Saidur & Kazi Akikur Rahman & Md. Riaz Kayser, 2021. "Analysis of Energy Use and Energy Savings: A Case Study of a Condiment Industry in India," Energies, MDPI, vol. 14(16), pages 1-25, August.
    5. Madlool, N.A. & Saidur, R. & Rahim, N.A. & Kamalisarvestani, M., 2013. "An overview of energy savings measures for cement industries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 19(C), pages 18-29.
    6. Saidur, R. & Hasanuzzaman, M. & Yogeswaran, S. & Mohammed, H.A. & Hossain, M.S., 2010. "An end-use energy analysis in a Malaysian public hospital," Energy, Elsevier, vol. 35(12), pages 4780-4785.
    7. Habib, Mohammad Ahsan & Hasanuzzaman, M. & Hosenuzzaman, M. & Salman, Asif & Mehadi, Md Riyad, 2016. "Energy consumption, energy saving and emission reduction of a garment industrial building in Bangladesh," Energy, Elsevier, vol. 112(C), pages 91-100.
    8. Trianni, Andrea & Cagno, Enrico & Accordini, Davide, 2019. "Energy efficiency measures in electric motors systems: A novel classification highlighting specific implications in their adoption," Applied Energy, Elsevier, vol. 252(C), pages 1-1.
    9. Saidur, R. & Rahim, N.A. & Ping, H.W. & Jahirul, M.I. & Mekhilef, S. & Masjuki, H.H., 2009. "Energy and emission analysis for industrial motors in Malaysia," Energy Policy, Elsevier, vol. 37(9), pages 3650-3658, September.
    10. Hasanuzzaman, M. & Rahim, N.A. & Hosenuzzaman, M. & Saidur, R. & Mahbubul, I.M. & Rashid, M.M., 2012. "Energy savings in the combustion based process heating in industrial sector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(7), pages 4527-4536.
    11. Saidur, R. & Rahim, N.A. & Hasanuzzaman, M., 2010. "A review on compressed-air energy use and energy savings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(4), pages 1135-1153, May.
    12. Burgos Payán, Manuel & Roldan Fernandez, Juan Manuel & Maza Ortega, Jose Maria & Riquelme Santos, Jesus Manuel, 2019. "Techno-economic optimal power rating of induction motors," Applied Energy, Elsevier, vol. 240(C), pages 1031-1048.
    13. Madlool, N.A. & Saidur, R. & Hossain, M.S. & Rahim, N.A., 2011. "A critical review on energy use and savings in the cement industries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(4), pages 2042-2060, May.
    14. Abdelaziz, E.A. & Saidur, R. & Mekhilef, S., 2011. "A review on energy saving strategies in industrial sector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(1), pages 150-168, January.
    15. Saidur, R. & Hasanuzzaman, M. & Mahlia, T.M.I. & Rahim, N.A. & Mohammed, H.A., 2011. "Chillers energy consumption, energy savings and emission analysis in an institutional buildings," Energy, Elsevier, vol. 36(8), pages 5233-5238.
    16. Singh, Gurmeet & Anil Kumar, T.Ch. & Naikan, V.N.A., 2019. "Efficiency monitoring as a strategy for cost effective maintenance of induction motors for minimizing carbon emission and energy consumption," Reliability Engineering and System Safety, Elsevier, vol. 184(C), pages 193-201.
    17. Shekarchian, M. & Moghavvemi, M. & Mahlia, T.M.I. & Mazandarani, A., 2011. "A review on the pattern of electricity generation and emission in Malaysia from 1976 to 2008," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(6), pages 2629-2642, August.
    18. Muthu Kumaran Gunasegaran & Md Hasanuzzaman & ChiaKwang Tan & Ab Halim Abu Bakar & Vignes Ponniah, 2022. "Energy Analysis, Building Energy Index and Energy Management Strategies for Fast-Food Restaurants in Malaysia," Sustainability, MDPI, vol. 14(20), pages 1-18, October.
    19. Yoon, Hae-Sung & Kim, Eun-Seob & Kim, Min-Soo & Lee, Jang-Yeob & Lee, Gyu-Bong & Ahn, Sung-Hoon, 2015. "Towards greener machine tools – A review on energy saving strategies and technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 48(C), pages 870-891.
    20. Hosain, Md Lokman & Bel Fdhila, Rebei & Rönnberg, Kristian, 2017. "Taylor-Couette flow and transient heat transfer inside the annulus air-gap of rotating electrical machines," Applied Energy, Elsevier, vol. 207(C), pages 624-633.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:36:y:2011:i:7:p:4307-4314. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.