IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v12y2019i17p3232-d259862.html
   My bibliography  Save this article

Modified Rotor Flux Estimators for Stator-Fault-Tolerant Vector Controlled Induction Motor Drives

Author

Listed:
  • Mateusz Dybkowski

    (Department of Electrical Machines, Drives and Measurements, Wrocław University of Science and Technology, Wrocław 50-370, Wybrzeże Wyspiańskiego 27, Poland)

  • Szymon Antoni Bednarz

    (Department of Electrical Machines, Drives and Measurements, Wrocław University of Science and Technology, Wrocław 50-370, Wybrzeże Wyspiańskiego 27, Poland)

Abstract

This paper deals with fault-tolerant control (FTC) of an induction motor (IM) drive. An inter-turn short circuit (ITSC) of the stator windings was taken into consideration, which is one of the most common internal faults of induction machines. The sensitivity of the classic, well-known voltage and current models to the stator winding faults was analyzed. It has been shown that these classical state variable estimators are sensitive to induction motor parameter changes during stator winding failure, which results in unstable operation of the direct field-oriented control (DFOC) drive. From a safety-critical applications point of view, it is vital to guarantee stable operation of the drive even during faults of the machine. Therefore, a new FTC system has been proposed, which consists of new modified rotor flux estimators, robust to stator winding faults. A detailed description of the proposed system is presented herein, as well as the results of simulation and experimental tests. Simulation analyses were performed using MATLAB/Simulink software. Experimental tests were carried out on the experimental test bench with a dSpace DS1103 card. The proposed solution could be applied as an alternative rotor flux estimation technique for the modern FTC drive.

Suggested Citation

  • Mateusz Dybkowski & Szymon Antoni Bednarz, 2019. "Modified Rotor Flux Estimators for Stator-Fault-Tolerant Vector Controlled Induction Motor Drives," Energies, MDPI, vol. 12(17), pages 1-21, August.
  • Handle: RePEc:gam:jeners:v:12:y:2019:i:17:p:3232-:d:259862
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/12/17/3232/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/12/17/3232/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Israel Zamudio-Ramirez & Roque Alfredo Osornio-Rios & Miguel Trejo-Hernandez & Rene de Jesus Romero-Troncoso & Jose Alfonso Antonino-Daviu, 2019. "Smart-Sensors to Estimate Insulation Health in Induction Motors via Analysis of Stray Flux," Energies, MDPI, vol. 12(9), pages 1-16, May.
    2. Khalaf Gaeid, 2011. "Fault Tolerant Control of Induction Motor," Modern Applied Science, Canadian Center of Science and Education, vol. 5(4), pages 1-83, August.
    3. Takwa Sellami & Hanen Berriri & Sana Jelassi & A Moumen Darcherif & M Faouzi Mimouni, 2017. "Short-Circuit Fault Tolerant Control of a Wind Turbine Driven Induction Generator Based on Sliding Mode Observers," Energies, MDPI, vol. 10(10), pages 1-21, October.
    4. Yuri Merizalde & Luis Hernández-Callejo & Oscar Duque-Perez, 2017. "State of the Art and Trends in the Monitoring, Detection and Diagnosis of Failures in Electric Induction Motors," Energies, MDPI, vol. 10(7), pages 1-34, July.
    5. Luqman Maraaba & Zakariya Al-Hamouz & Mohammad Abido, 2018. "An Efficient Stator Inter-Turn Fault Diagnosis Tool for Induction Motors," Energies, MDPI, vol. 11(3), pages 1-18, March.
    6. Grzegorz Tarchała & Marcin Wolkiewicz, 2019. "Performance of the Stator Winding Fault Diagnosis in Sensorless Induction Motor Drive," Energies, MDPI, vol. 12(8), pages 1-20, April.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zorig, Assam & Hedayati Kia, Shahin & Chouder, Aissa & Rabhi, Abdelhamid, 2022. "A comparative study for stator winding inter-turn short-circuit fault detection based on harmonic analysis of induction machine signatures," Mathematics and Computers in Simulation (MATCOM), Elsevier, vol. 196(C), pages 273-288.
    2. Mitja Nemec & Vanja Ambrožič & Rastko Fišer & David Nedeljković & Klemen Drobnič, 2019. "Induction Motor Broken Rotor Bar Detection Based on Rotor Flux Angle Monitoring," Energies, MDPI, vol. 12(5), pages 1-17, February.
    3. Wojciech Pietrowski & Konrad Górny, 2020. "Analysis of Torque Ripples of an Induction Motor Taking into Account a Inter-Turn Short-Circuit in a Stator Winding," Energies, MDPI, vol. 13(14), pages 1-19, July.
    4. Grzegorz Tarchała & Marcin Wolkiewicz, 2019. "Performance of the Stator Winding Fault Diagnosis in Sensorless Induction Motor Drive," Energies, MDPI, vol. 12(8), pages 1-20, April.
    5. Nikola Lopac & Neven Bulic & Niksa Vrkic, 2019. "Sliding Mode Observer-Based Load Angle Estimation for Salient-Pole Wound Rotor Synchronous Generators," Energies, MDPI, vol. 12(9), pages 1-22, April.
    6. Lien-Kai Chang & Shun-Hong Wang & Mi-Ching Tsai, 2020. "Demagnetization Fault Diagnosis of a PMSM Using Auto-Encoder and K-Means Clustering," Energies, MDPI, vol. 13(17), pages 1-12, August.
    7. Przemyslaw Pietrzak & Marcin Wolkiewicz, 2021. "Comparison of Selected Methods for the Stator Winding Condition Monitoring of a PMSM Using the Stator Phase Currents," Energies, MDPI, vol. 14(6), pages 1-23, March.
    8. Sebastian Berhausen & Tomasz Jarek, 2021. "Method of Limiting Shaft Voltages in AC Electric Machines," Energies, MDPI, vol. 14(11), pages 1-19, June.
    9. Kang Wang & Ruituo Huai & Zhihao Yu & Xiaoyang Zhang & Fengjuan Li & Luwei Zhang, 2019. "Comparison Study of Induction Motor Models Considering Iron Loss for Electric Drives," Energies, MDPI, vol. 12(3), pages 1-13, February.
    10. Luo Wang & Yonggang Li & Junqing Li, 2018. "Diagnosis of Inter-Turn Short Circuit of Synchronous Generator Rotor Winding Based on Volterra Kernel Identification," Energies, MDPI, vol. 11(10), pages 1-15, September.
    11. Carlos Candelo-Zuluaga & Jordi-Roger Riba & Carlos López-Torres & Antoni Garcia, 2019. "Detection of Inter-Turn Faults in Multi-Phase Ferrite-PM Assisted Synchronous Reluctance Machines," Energies, MDPI, vol. 12(14), pages 1-15, July.
    12. Piotr Kołodziejek & Daniel Wachowiak, 2022. "Fast Real-Time RDFT- and GDFT-Based Direct Fault Diagnosis of Induction Motor Drive," Energies, MDPI, vol. 15(3), pages 1-14, February.
    13. Yun-Tao Shi & Xiang Xiang & Li Wang & Yuan Zhang & De-Hui Sun, 2018. "Stochastic Model Predictive Fault Tolerant Control Based on Conditional Value at Risk for Wind Energy Conversion System," Energies, MDPI, vol. 11(1), pages 1-20, January.
    14. Yury Kuznetsov & Igor Kravchenko & Dmitry Gerashchenkov & Mikhail Markov & Vadim Davydov & Anna Mozhayko & Valentin Dudkin & Alina Bykova, 2022. "The Use of Cold Spraying and Micro-Arc Oxidation Techniques for the Repairing and Wear Resistance Improvement of Motor Electric Bearing Shields," Energies, MDPI, vol. 15(3), pages 1-12, January.
    15. Qinyue Zhu & Zhaoyang Li & Xitang Tan & Dabo Xie & Wei Dai, 2019. "Sensors Fault Diagnosis and Active Fault-Tolerant Control for PMSM Drive Systems Based on a Composite Sliding Mode Observer," Energies, MDPI, vol. 12(9), pages 1-20, May.
    16. Camila Paes Salomon & Wilson Cesar Sant’Ana & Germano Lambert-Torres & Luiz Eduardo Borges da Silva & Erik Leandro Bonaldi & Levy Ely de Lacerda De Oliveira, 2018. "Comparison among Methods for Induction Motor Low-Intrusive Efficiency Evaluation Including a New AGT Approach with a Modified Stator Resistance," Energies, MDPI, vol. 11(4), pages 1-21, March.
    17. Zia Ullah & Jin Hur, 2018. "A Comprehensive Review of Winding Short Circuit Fault and Irreversible Demagnetization Fault Detection in PM Type Machines," Energies, MDPI, vol. 11(12), pages 1-27, November.
    18. Muhammad Zuhaib & Faraz Ahmed Shaikh & Wajiha Tanweer & Abdullah M. Alnajim & Saleh Alyahya & Sheroz Khan & Muhammad Usman & Muhammad Islam & Mohammad Kamrul Hasan, 2022. "Faults Feature Extraction Using Discrete Wavelet Transform and Artificial Neural Network for Induction Motor Availability Monitoring—Internet of Things Enabled Environment," Energies, MDPI, vol. 15(21), pages 1-32, October.
    19. Arkadiusz Duda & Maciej Sułowicz, 2020. "A New Effective Method of Induction Machine Condition Assessment Based on Zero-Sequence Voltage (ZSV) Symptoms," Energies, MDPI, vol. 13(14), pages 1-26, July.
    20. Jordi Burriel-Valencia & Ruben Puche-Panadero & Javier Martinez-Roman & Angel Sapena-Baño & Martin Riera-Guasp & Manuel Pineda-Sánchez, 2019. "Multi-Band Frequency Window for Time-Frequency Fault Diagnosis of Induction Machines," Energies, MDPI, vol. 12(17), pages 1-18, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:12:y:2019:i:17:p:3232-:d:259862. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.