IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v80y2017icp1412-1457.html
   My bibliography  Save this article

Entropy generation vs energy efficiency for natural convection based energy flow in enclosures and various applications: A review

Author

Listed:
  • Biswal, Pratibha
  • Basak, Tanmay

Abstract

The entropy generation minimization (EGM) technique is an important tool for the optimization of the thermal systems via the analysis of the associated irreversibilities measured by the entropy generation. This article presents a detailed review of works on the entropy generation analysis during natural convection in various enclosures and processes involving different practical applications. The mathematical formulations of the fundamental governing equations for natural convection followed by the equations of the entropy generation are presented. The calculation procedure of the entropy generation for various test cases is reported briefly with the finite difference and finite volume techniques for some test cases and the detailed discussion of the evaluation of the entropy generation via the finite element method is addressed. Further, the problem formulation and results in terms of the entropy generation are discussed for natural convection in enclosures of various shapes (square/rectangular, trapezoidal, triangular, parallellogrammic/rhombic, curved/wavy). The brief discussion on the entropy generation analysis during various practical applications is also addressed. Overall, the minimum entropy generation vs enhanced heat transfer rate is the main issue in all the case studies with various enclosures involving a number of practical applications to achieve the optimal configuration with the high energy efficiency. The need of the renewable energy is increasing day by day. Thus, the conversion of the renewable energy to a useful form is one of the most challenging processes and natural convection plays an important role in the conversion. The loss of the available energy via the entropy production during natural convection is highly important for the design of suitable energy systems. This review article further provides basis for future research on the entropy generation analysis during natural convection in order to improve the energy efficiency which may be applicable for various renewable energy systems.

Suggested Citation

  • Biswal, Pratibha & Basak, Tanmay, 2017. "Entropy generation vs energy efficiency for natural convection based energy flow in enclosures and various applications: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 80(C), pages 1412-1457.
  • Handle: RePEc:eee:rensus:v:80:y:2017:i:c:p:1412-1457
    DOI: 10.1016/j.rser.2017.04.070
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364032117305671
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.rser.2017.04.070?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Le Roux, W.G. & Bello-Ochende, T. & Meyer, J.P., 2013. "A review on the thermodynamic optimisation and modelling of the solar thermal Brayton cycle," Renewable and Sustainable Energy Reviews, Elsevier, vol. 28(C), pages 677-690.
    2. VijayaVenkataRaman, S. & Iniyan, S. & Goic, Ranko, 2012. "A review of solar drying technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(5), pages 2652-2670.
    3. Umberto Lucia, 2014. "The Gouy-Stodola Theorem in Bioenergetic Analysis of Living Systems (Irreversibility in Bioenergetics of Living Systems)," Energies, MDPI, vol. 7(9), pages 1-23, September.
    4. Arpino, F. & Massarotti, N., 2009. "Numerical simulation of mass and energy transport phenomena in solid oxide fuel cells," Energy, Elsevier, vol. 34(12), pages 2033-2041.
    5. Jegadheeswaran, S. & Pohekar, S.D. & Kousksou, T., 2010. "Exergy based performance evaluation of latent heat thermal storage system: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(9), pages 2580-2595, December.
    6. Mezrhab, Ahmed & Elfarh, Larbi & Naji, Hassan & Lemonnier, D., 2010. "Computation of surface radiation and natural convection in a heated horticultural greenhouse," Applied Energy, Elsevier, vol. 87(3), pages 894-900, March.
    7. Daungthongsuk, Weerapun & Wongwises, Somchai, 2007. "A critical review of convective heat transfer of nanofluids," Renewable and Sustainable Energy Reviews, Elsevier, vol. 11(5), pages 797-817, June.
    8. Naphon, Paisarn, 2005. "On the performance and entropy generation of the double-pass solar air heater with longitudinal fins," Renewable Energy, Elsevier, vol. 30(9), pages 1345-1357.
    9. Sciacovelli, A. & Verda, V. & Sciubba, E., 2015. "Entropy generation analysis as a design tool—A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 1167-1181.
    10. Demi̇rel, Y., 1995. "Thermodynamic optimization of convective heat transfer in a packed duct," Energy, Elsevier, vol. 20(10), pages 959-967.
    11. Lucia, Umberto, 2013. "Entropy and exergy in irreversible renewable energy systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 20(C), pages 559-564.
    12. Basak, Tanmay & Anandalakshmi, R. & Kumar, Pushpendra & Roy, S., 2012. "Entropy generation vs energy flow due to natural convection in a trapezoidal cavity with isothermal and non-isothermal hot bottom wall," Energy, Elsevier, vol. 37(1), pages 514-532.
    13. Lucia, Umberto, 2011. "Second law analysis of the ideal Ericsson magnetic refrigeration," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(6), pages 2872-2875, August.
    14. Chen, Sheng & Du, Rui, 2011. "Entropy generation of turbulent double-diffusive natural convection in a rectangle cavity," Energy, Elsevier, vol. 36(3), pages 1721-1734.
    15. Bejan, Adrian, 1980. "Second law analysis in heat transfer," Energy, Elsevier, vol. 5(8), pages 720-732.
    16. Bejan, Mary & Bejan, Adrian, 1982. "A supply-side approach to energy policy," Energy Policy, Elsevier, vol. 10(2), pages 153-157, June.
    17. Manjunath, K. & Kaushik, S.C., 2014. "Second law thermodynamic study of heat exchangers: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 40(C), pages 348-374.
    18. Liu, Di & Zhao, Fu-Yun & Wang, Han-Qing, 2011. "Passive heat and moisture removal from a natural vented enclosure with a massive wall," Energy, Elsevier, vol. 36(5), pages 2867-2882.
    19. Kaluri, Ram Satish & Basak, Tanmay, 2011. "Entropy generation due to natural convection in discretely heated porous square cavities," Energy, Elsevier, vol. 36(8), pages 5065-5080.
    20. Abu-Hijleh, B.A/K & Abu-Qudais, M & Abu Nada, E, 1999. "Numerical prediction of entropy generation due to natural convection from a horizontal cylinder," Energy, Elsevier, vol. 24(4), pages 327-333.
    21. Bhardwaj, Saurabh & Dalal, Amaresh & Pati, Sukumar, 2015. "Influence of wavy wall and non-uniform heating on natural convection heat transfer and entropy generation inside porous complex enclosure," Energy, Elsevier, vol. 79(C), pages 467-481.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. López-Núñez, Oscar A. & Alfaro-Ayala, J. Arturo & Ramírez-Minguela, J.J. & Belman-Flores, J.M. & Jaramillo, O.A., 2020. "Optimization of a Linear Fresnel Reflector Applying Computational Fluid Dynamics, Entropy Generation Rate and Evolutionary Programming," Renewable Energy, Elsevier, vol. 152(C), pages 698-712.
    2. Ehsan Gholamalizadeh & Mohammad Yaghoub Abdollahzadeh Jamalabadi & Majid Oveisi, 2017. "Optimal Design of Thermal Radiative Heating of Horizontal Thin Plates Using the Entropy Generation Minimization Method," Energies, MDPI, vol. 10(11), pages 1-14, November.
    3. Kumar, Vinay & Murthy, S.V.S.S.N.V.G. Krishna & Kumar, B.V. Rathish, 2023. "Multi-force effect on fluid flow, heat and mass transfer, and entropy generation in a stratified fluid-saturated porous enclosure," Mathematics and Computers in Simulation (MATCOM), Elsevier, vol. 203(C), pages 328-367.
    4. López-Núñez, Oscar A. & Alfaro-Ayala, J. Arturo & Jaramillo, O.A. & Ramírez-Minguela, J.J. & Castro, J. Carlos & Damian-Ascencio, Cesar E. & Cano-Andrade, Sergio, 2020. "A numerical analysis of the energy and entropy generation rate in a Linear Fresnel Reflector using computational fluid dynamics," Renewable Energy, Elsevier, vol. 146(C), pages 1083-1100.
    5. Igor V. Miroshnichenko & Mikhail A. Sheremet & Abdulmajeed A. Mohamad, 2019. "The Influence of Surface Radiation on the Passive Cooling of a Heat-Generating Element," Energies, MDPI, vol. 12(6), pages 1-14, March.
    6. Khurana, Hitesh & Majumdar, Rudrodip & Saha, Sandip K., 2022. "Response Surface Methodology-based prediction model for working fluid temperature during stand-alone operation of vertical cylindrical thermal energy storage tank," Renewable Energy, Elsevier, vol. 188(C), pages 619-636.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Mahian, Omid & Mahmud, Shohel & Heris, Saeed Zeinali, 2012. "Analysis of entropy generation between co-rotating cylinders using nanofluids," Energy, Elsevier, vol. 44(1), pages 438-446.
    2. Ibáñez, Guillermo & López, Aracely & Pantoja, Joel & Moreira, Joel & Reyes, Juan A., 2013. "Optimum slip flow based on the minimization of entropy generation in parallel plate microchannels," Energy, Elsevier, vol. 50(C), pages 143-149.
    3. Basak, Tanmay & Anandalakshmi, R. & Kumar, Pushpendra & Roy, S., 2012. "Entropy generation vs energy flow due to natural convection in a trapezoidal cavity with isothermal and non-isothermal hot bottom wall," Energy, Elsevier, vol. 37(1), pages 514-532.
    4. Fudholi, Ahmad & Sopian, Kamaruzzaman, 2019. "A review of solar air flat plate collector for drying application," Renewable and Sustainable Energy Reviews, Elsevier, vol. 102(C), pages 333-345.
    5. Bejan, Adrian, 2018. "Thermodynamics today," Energy, Elsevier, vol. 160(C), pages 1208-1219.
    6. Lucia, Umberto, 2015. "Quanta and entropy generation," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 419(C), pages 115-121.
    7. El-Behery, Samy M. & Hussien, A.A. & Kotb, H. & El-Shafie, Mostafa, 2017. "Performance evaluation of industrial glass furnace regenerator," Energy, Elsevier, vol. 119(C), pages 1119-1130.
    8. Lucia, Umberto & Simonetti, Marco & Chiesa, Giacomo & Grisolia, Giulia, 2017. "Ground-source pump system for heating and cooling: Review and thermodynamic approach," Renewable and Sustainable Energy Reviews, Elsevier, vol. 70(C), pages 867-874.
    9. Bhardwaj, Saurabh & Dalal, Amaresh & Pati, Sukumar, 2015. "Influence of wavy wall and non-uniform heating on natural convection heat transfer and entropy generation inside porous complex enclosure," Energy, Elsevier, vol. 79(C), pages 467-481.
    10. Rashidi, M.M. & Ali, M. & Freidoonimehr, N. & Nazari, F., 2013. "Parametric analysis and optimization of entropy generation in unsteady MHD flow over a stretching rotating disk using artificial neural network and particle swarm optimization algorithm," Energy, Elsevier, vol. 55(C), pages 497-510.
    11. Chater, Hamza & Asbik, Mohamed & Mouaky, Ammar & Koukouch, Abdelghani & Belandria, Veronica & Sarh, Brahim, 2023. "Experimental and CFD investigation of a helical coil heat exchanger coupled with a parabolic trough solar collector for heating a batch reactor: An exergy approach," Renewable Energy, Elsevier, vol. 202(C), pages 1507-1519.
    12. Ranjit, N.K. & Shit, G.C., 2017. "Entropy generation on electro-osmotic flow pumping by a uniform peristaltic wave under magnetic environment," Energy, Elsevier, vol. 128(C), pages 649-660.
    13. Lucia, Umberto & Grisolia, Giulia, 2017. "Unavailability percentage as energy planning and economic choice parameter," Renewable and Sustainable Energy Reviews, Elsevier, vol. 75(C), pages 197-204.
    14. El-Shafie, Mostafa & Kambara, Shinji & Hayakawa, Yukio & Hussien, A.A., 2021. "Integration between energy and exergy analyses to assess the performance of furnace regenerative and ammonia decomposition systems," Renewable Energy, Elsevier, vol. 175(C), pages 232-243.
    15. Saidi, Majid & Karimi, Gholamreza, 2014. "Free convection cooling in modified L-shape enclosures using copper–water nanofluid," Energy, Elsevier, vol. 70(C), pages 251-271.
    16. Lucia, Umberto, 2016. "Second law considerations on the third law: From Boltzmann and Loschmidt paradox to non equilibrium temperature," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 444(C), pages 121-128.
    17. Xu, Yun-Chao & Chen, Qun & Guo, Zeng-Yuan, 2015. "Entransy dissipation-based constraint for optimization of heat exchanger networks in thermal systems," Energy, Elsevier, vol. 86(C), pages 696-708.
    18. Kumar, Vinay & Murthy, S.V.S.S.N.V.G. Krishna & Kumar, B.V. Rathish, 2023. "Multi-force effect on fluid flow, heat and mass transfer, and entropy generation in a stratified fluid-saturated porous enclosure," Mathematics and Computers in Simulation (MATCOM), Elsevier, vol. 203(C), pages 328-367.
    19. Ibrahim, Thamir K. & Mohammed, Mohammed Kamil & Awad, Omar I. & Abdalla, Ahmed N. & Basrawi, Firdaus & Mohammed, Marwah N. & Najafi, G. & Mamat, Rizalman, 2018. "A comprehensive review on the exergy analysis of combined cycle power plants," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 835-850.
    20. Lamidi, Rasaq. O. & Jiang, L. & Pathare, Pankaj B. & Wang, Y.D. & Roskilly, A.P., 2019. "Recent advances in sustainable drying of agricultural produce: A review," Applied Energy, Elsevier, vol. 233, pages 367-385.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:80:y:2017:i:c:p:1412-1457. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.