IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v195y2020ics0360544220300943.html
   My bibliography  Save this article

Influence of additive on ash and combustion characteristics during biomass combustion under O2/CO2 atmosphere

Author

Listed:
  • Wang, Qian
  • Han, Kuihua
  • Wang, Peifu
  • Li, Shijie
  • Zhang, Mingyang

Abstract

The combination of biomass combustion and oxyfuel combustion is usually defined as oxy-biomass combustion, which is beneficial to relieve greenhouse gas emission. Due to the alkali content in herbaceous biomass is high, its influence on ash characteristics under O2/CO2 atmosphere and corresponding solutions need deep investigation. To solve ash fusion problems, a kind of phosphorus based additive was applied to mix with rice straw and combustion under O2/CO2 atmosphere. The ash characteristics from perspectives of potassium retention, ash fusion temperatures, potassium transformation and combustion characteristics were studied and compared. The reaction mechanism was comprehensive analyzed by both experiment and simulation. The combustion characteristics was investigated by thermogravimetric analysis. After addition of NH4H2PO4, high melting potassium compounds were produced and potassium fixation ratios at 900 °C was increased 3.35 times. Four ash fusion characteristic temperatures of RS were higher than 1500 °C and NH4H2PO4 has slight negative influence on combustion.

Suggested Citation

  • Wang, Qian & Han, Kuihua & Wang, Peifu & Li, Shijie & Zhang, Mingyang, 2020. "Influence of additive on ash and combustion characteristics during biomass combustion under O2/CO2 atmosphere," Energy, Elsevier, vol. 195(C).
    • Handle: RePEc:eee:energy:v:195:y:2020:i:c:s0360544220300943
    DOI: 10.1016/j.energy.2020.116987
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220300943
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.116987?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Fan, Jing-Li & Xu, Mao & Li, Fengyu & Yang, Lin & Zhang, Xian, 2018. "Carbon capture and storage (CCS) retrofit potential of coal-fired power plants in China: The technology lock-in and cost optimization perspective," Applied Energy, Elsevier, vol. 229(C), pages 326-334.
    2. Li, Fenghai & Li, Yang & Fan, Hongli & Wang, Tao & Guo, Mingxi & Fang, Yitian, 2019. "Investigation on fusion characteristics of deposition from biomass vibrating grate furnace combustion and its modification," Energy, Elsevier, vol. 174(C), pages 724-734.
    3. Wang, Qian & Han, Kuihua & Wang, Jiamin & Gao, Jie & Lu, Chunmei, 2017. "Influence of phosphorous based additives on ash melting characteristics during combustion of biomass briquette fuel," Renewable Energy, Elsevier, vol. 113(C), pages 428-437.
    4. Pérez-Jeldres, Rubén & Flores, Mauricio & Cornejo, Pablo & Gordon, Alfredo & García, Ximena, 2018. "Co-firing of coal/biomass blends in a pilot plant facility: A comparative study between Opuntia ficus-indica and Pinus radiata," Energy, Elsevier, vol. 145(C), pages 1-16.
    5. Zhou, Chunguang & Rosén, Christer & Engvall, Klas, 2016. "Biomass oxygen/steam gasification in a pressurized bubbling fluidized bed: Agglomeration behavior," Applied Energy, Elsevier, vol. 172(C), pages 230-250.
    6. Ding, Lu & Gong, Yan & Wang, Yifei & Wang, Fuchen & Yu, Guangsuo, 2017. "Characterisation of the morphological changes and interactions in char, slag and ash during CO2 gasification of rice straw and lignite," Applied Energy, Elsevier, vol. 195(C), pages 713-724.
    7. Luan, Chao & You, Changfu & Zhang, Dongke, 2014. "Composition and sintering characteristics of ashes from co-firing of coal and biomass in a laboratory-scale drop tube furnace," Energy, Elsevier, vol. 69(C), pages 562-570.
    8. Yao, Xiwen & Zhou, Haodong & Xu, Kaili & Xu, Qingwei & Li, Li, 2020. "Investigation on the fusion characterization and melting kinetics of ashes from co-firing of anthracite and pine sawdust," Renewable Energy, Elsevier, vol. 145(C), pages 835-846.
    9. Yao, Xiwen & Zhou, Haodong & Xu, Kaili & Chen, Shoukun & Ge, Ji & Xu, Qingwei, 2020. "Systematic study on ash transformation behaviour and thermal kinetic characteristics during co-firing of biomass with high ratios of bituminous coal," Renewable Energy, Elsevier, vol. 147(P1), pages 1453-1468.
    10. Qi, Jianhui & Li, Hui & Han, Kuihua & Zuo, Qi & Gao, Jie & Wang, Qian & Lu, Chunmei, 2016. "Influence of ammonium dihydrogen phosphate on potassium retention and ash melting characteristics during combustion of biomass," Energy, Elsevier, vol. 102(C), pages 244-251.
    11. Liu, Zhijia & Zhang, Tao & Zhang, Jian & Xiang, Hongzhong & Yang, Xiaomeng & Hu, Wanhe & Liang, Fang & Mi, Bingbing, 2018. "Ash fusion characteristics of bamboo, wood and coal," Energy, Elsevier, vol. 161(C), pages 517-522.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Hariana, & Ghazidin, Hafizh & Putra, Hanafi Prida & Darmawan, Arif & Prabowo, & Hilmawan, Edi & Aziz, Muhammad, 2023. "The effects of additives on deposit formation during co-firing of high-sodium coal with high-potassium and -chlorine biomass," Energy, Elsevier, vol. 271(C).
    2. Wang, Qian & Cao, Qiankun & Wang, Rui & Wang, Peifu & Zhao, Yanhua & Li, Shijie & Han, Feifei, 2023. "Influence of phosphorus based additives on nitrogen and sulfur pollutants emissions during densified biochar combustion," Energy, Elsevier, vol. 275(C).
    3. Liu, Zhongyi & Jin, Jing & Zheng, Liangqian & Zhang, Ruipu & Dong, Bo & Liang, Guowei & Zhai, Zhongyuan, 2023. "Adhesion strength of straw biomass ash: Effect of dolomite additive," Energy, Elsevier, vol. 262(PA).
    4. Krzysztof Mudryk & Marcin Jewiarz & Marek Wróbel & Marcin Niemiec & Arkadiusz Dyjakon, 2021. "Evaluation of Urban Tree Leaf Biomass-Potential, Physico-Mechanical and Chemical Parameters of Raw Material and Solid Biofuel," Energies, MDPI, vol. 14(4), pages 1-14, February.
    5. Liu, Yacheng & Fan, Weidong & Guo, Hao, 2020. "A calculation model for the overall process of high temperature corrosion mechanism induced by firing coal with high chlorine and sodium content," Energy, Elsevier, vol. 205(C).
    6. Anwar Ameen Hezam Saeed & Noorfidza Yub Harun & Muhammad Roil Bilad & Muhammad T. Afzal & Ashak Mahmud Parvez & Farah Amelia Shahirah Roslan & Syahirah Abdul Rahim & Vimmal Desiga Vinayagam & Haruna K, 2021. "Moisture Content Impact on Properties of Briquette Produced from Rice Husk Waste," Sustainability, MDPI, vol. 13(6), pages 1-14, March.
    7. Chen, Zhiyun & Liu, Jingyong & Chen, Huashan & Ding, Ziyi & Tang, Xiaojie & Evrendilek, Fatih, 2022. "Oxy-fuel and air atmosphere combustions of Chinese medicine residues: Performances, mechanisms, flue gas emission, and ash properties," Renewable Energy, Elsevier, vol. 182(C), pages 102-118.
    8. Xu, Ming-xin & Zhang, Xin-yu & Zhang, Ping-xin & Di, Jin-yi & Ji, Hai-wen & Meng, Xiang-xi & Lu, Qiang, 2023. "The interactive effects of operating parameters on ash slagging during oxy-biomass combustion based on response surface methodology," Energy, Elsevier, vol. 277(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Fenghai & Li, Yang & Fan, Hongli & Wang, Tao & Guo, Mingxi & Fang, Yitian, 2019. "Investigation on fusion characteristics of deposition from biomass vibrating grate furnace combustion and its modification," Energy, Elsevier, vol. 174(C), pages 724-734.
    2. Zhang, Heng & Hao, Zhenhua & Li, Junguo & Yang, Xin & Wang, Zhiqing & Liu, Zheyu & Huang, Jiejie & Zhang, Yongqi & Fang, Yitian, 2021. "Effect of coal ash additive on potassium fixation and melting behaviors of the mixture under simulated biomass gasification condition," Renewable Energy, Elsevier, vol. 168(C), pages 806-814.
    3. Yao, Xiwen & Zheng, Yan & Zhou, Haodong & Xu, Kaili & Xu, Qingwei & Li, Li, 2020. "Effects of biomass blending, ashing temperature and potassium addition on ash sintering behaviour during co-firing of pine sawdust with a Chinese anthracite," Renewable Energy, Elsevier, vol. 147(P1), pages 2309-2320.
    4. Li, Fenghai & Zhao, Chaoyue & Guo, Qianqian & Li, Yang & Fan, Hongli & Guo, Mingxi & Wu, Lishun & Huang, Jiejie & Fang, Yitian, 2020. "Exploration in ash-deposition (AD) behavior modification of low-rank coal by manure addition," Energy, Elsevier, vol. 208(C).
    5. Yao, Xiwen & Zhao, Zhicheng & Li, Jishuo & Zhang, Bohan & Zhou, Haodong & Xu, Kaili, 2020. "Experimental investigation of physicochemical and slagging characteristics of inorganic constituents in ash residues from gasification of different herbaceous biomass," Energy, Elsevier, vol. 198(C).
    6. Li, Fenghai & Liu, Quanrun & Li, Meng & Fang, Yitian, 2018. "Understanding fly-ash formation during fluidized-bed gasification of high-silicon-aluminum coal based on its characteristics," Energy, Elsevier, vol. 150(C), pages 142-152.
    7. Yao, Xiwen & Zhao, Zhicheng & Xu, Kaili & Zhou, Haodong, 2020. "Determination of ash forming characteristics and fouling/slagging behaviours during gasification of masson pine in a fixed-bed gasifier," Renewable Energy, Elsevier, vol. 160(C), pages 1420-1430.
    8. Reinmöller, Markus & Schreiner, Marcus & Laabs, Marcel & Scharm, Christoph & Yao, Zhitong & Guhl, Stefan & Neuroth, Manuela & Meyer, Bernd & Gräbner, Martin, 2023. "Formation and transformation of mineral phases in biomass ashes and evaluation of the feedstocks for application in high-temperature processes," Renewable Energy, Elsevier, vol. 210(C), pages 627-639.
    9. Li, Fenghai & Zhao, Chaoyue & Fan, Hongli & Xu, Meiling & Guo, Qianqian & Li, Yang & Wu, Lishun & Wang, Tao & Fang, Yitian, 2022. "Ash fusion behaviors of sugarcane bagasse and its modification with sewage sludge addition," Energy, Elsevier, vol. 251(C).
    10. Ziqiang Yang & Fenghai Li & Mingjie Ma & Xuefei Liu & Hongli Fan & Zhenzhu Li & Yong Wang & Yitian Fang, 2023. "Regulation Mechanism of Solid Waste on Ash Fusion Characteristics of Sorghum Straw under O 2 /CO 2 Atmosphere," Energies, MDPI, vol. 16(20), pages 1-17, October.
    11. Hariana, & Ghazidin, Hafizh & Putra, Hanafi Prida & Darmawan, Arif & Prabowo, & Hilmawan, Edi & Aziz, Muhammad, 2023. "The effects of additives on deposit formation during co-firing of high-sodium coal with high-potassium and -chlorine biomass," Energy, Elsevier, vol. 271(C).
    12. Mu, Lin & Li, Tong & Wang, Zhen & Shang, Yan & Yin, Hongchao, 2021. "Influence of water/acid washing pretreatment of aquatic biomass on ash transformation and slagging behavior during co-firing with bituminous coal," Energy, Elsevier, vol. 234(C).
    13. Zhu, Hongqing & Liao, Qi & Hu, Lintao & Xie, Linhao & Qu, Baolin & Gao, Rongxiang, 2023. "Effect of removal of alkali and alkaline earth metals in cornstalk on slagging/fouling and co-combustion characteristics of cornstalk/coal blends for biomass applications," Renewable Energy, Elsevier, vol. 207(C), pages 275-285.
    14. Zhang, Heng & Li, Junguo & Yang, Xin & Song, Shuangshuang & Wang, Zhiqing & Huang, Jiejie & Zhang, Yongqi & Fang, Yitian, 2020. "Influence of coal ash on CO2 gasification reactivity of corn stalk char," Renewable Energy, Elsevier, vol. 147(P1), pages 2056-2063.
    15. Yao, Xiwen & Zhao, Zhicheng & Chen, Shoukun & Zhou, Haodong & Xu, Kaili, 2020. "Migration and transformation behaviours of ash residues from a typical fixed-bed gasification station for biomass syngas production in China," Energy, Elsevier, vol. 201(C).
    16. Nguyen, Hoang Khoi & Moon, Ji Hong & Jo, Sung Ho & Park, Sung Jin & Bae, Dal Hee & Seo, Myung Won & Ra, Ho Won & Yoon, Sang-Jun & Yoon, Sung-Min & Lee, Jae Goo & Mun, Tae-Young & Song, Byungho, 2021. "Ash characteristics of oxy-biomass combustion in a circulating fluidized bed with kaolin addition," Energy, Elsevier, vol. 230(C).
    17. Yao, Xiwen & Zhou, Haodong & Xu, Keqiang & Liu, Qinghua & Xu, Kaili, 2024. "Understanding impacts of introducing CO2 in N2 and operation conditions on physicochemical property and fusion behaviour of solid products during thermal decomposition of corn stalks," Renewable Energy, Elsevier, vol. 221(C).
    18. AlNouss, Ahmed & McKay, Gordon & Al-Ansari, Tareq, 2020. "Enhancing waste to hydrogen production through biomass feedstock blending: A techno-economic-environmental evaluation," Applied Energy, Elsevier, vol. 266(C).
    19. Chen, Yuhong & Lyu, Yanfeng & Yang, Xiangdong & Zhang, Xiaohong & Pan, Hengyu & Wu, Jun & Lei, Yongjia & Zhang, Yanzong & Wang, Guiyin & Xu, Min & Luo, Hongbin, 2022. "Performance comparison of urea production using one set of integrated indicators considering energy use, economic cost and emissions’ impacts: A case from China," Energy, Elsevier, vol. 254(PC).
    20. Huang, Shengxiong & Lei, Can & Qin, Jie & Yi, Cheng & Chen, Tao & Yao, Lingling & Li, Bo & Wen, Yujiao & Zhou, Zhi & Xia, Mao, 2022. "Properties, kinetics and pyrolysis products distribution of oxidative torrefied camellia shell in different oxygen concentration," Energy, Elsevier, vol. 251(C).

    More about this item

    Keywords

    Biomass; O2/CO2 combustion; Ash fusion; Additive; Potassium;
    All these keywords.

    JEL classification:

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:195:y:2020:i:c:s0360544220300943. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.