IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v13y2021i6p3069-d514947.html
   My bibliography  Save this article

Moisture Content Impact on Properties of Briquette Produced from Rice Husk Waste

Author

Listed:
  • Anwar Ameen Hezam Saeed

    (Department of Chemical Engineering, Universiti Teknologi PETRONAS, Seri Iskandar 31750, Perak, Malaysia)

  • Noorfidza Yub Harun

    (Department of Chemical Engineering, Universiti Teknologi PETRONAS, Seri Iskandar 31750, Perak, Malaysia)

  • Muhammad Roil Bilad

    (Department of Chemistry Education, Universitas Pendidikan Mandalika (UNDIKMA), Jl. Pemuda No. 59A, Mataram 83126, Indonesia)

  • Muhammad T. Afzal

    (Department of Mechanical Engineering, University of New Brunswick, 15 Dineen Drive, Fredericton, NB E3B 5A3, Canada)

  • Ashak Mahmud Parvez

    (Department of Mechanical Engineering, University of New Brunswick, 15 Dineen Drive, Fredericton, NB E3B 5A3, Canada
    Institute of Combustion and Power Plant Technology (IFK), University of Stuttgart, Pfaffenwaldring 23, D-70569 Stuttgart, Germany)

  • Farah Amelia Shahirah Roslan

    (Department of Chemical Engineering, Universiti Teknologi PETRONAS, Seri Iskandar 31750, Perak, Malaysia)

  • Syahirah Abdul Rahim

    (Department of Chemical Engineering, Universiti Teknologi PETRONAS, Seri Iskandar 31750, Perak, Malaysia)

  • Vimmal Desiga Vinayagam

    (Department of Chemical Engineering, Universiti Teknologi PETRONAS, Seri Iskandar 31750, Perak, Malaysia)

  • Haruna Kolawole Afolabi

    (Department of Chemical Engineering, Universiti Teknologi PETRONAS, Seri Iskandar 31750, Perak, Malaysia)

Abstract

An agricultural waste-based source of energy in the form of briquettes from rice husk has emerged as an alternative energy source. However, rice husk-based briquette has a low bulk density and moisture content, resulting in low durability. This study investigated the effect of initial moisture contents of 12%, 14%, and 16% of rice husk-based briquettes blended with 10 wt% of kraft lignin on their chemical and physical characteristics. The briquetting was done using a hand push manual die compressor. The briquette properties were evaluated by performing chemical (ultimate and proximate analysis, thermogravimetric analysis), physical (density, durability, compressive strength, and surface morphology) analyses. The durability values of all briquette samples were above 95%, meeting the standard with good compressive strength, surface morphology, and acceptable density range. The briquette made from the blend with 14% moisture content showed the highest calorific value of 17.688 MJ kg −1 , thanks to its desirable morphology and good porosity range, which facilitates the transport of air for combustion. Overall, this study proved the approach of enhancing the quality of briquettes from rice husk by controlling the moisture content.

Suggested Citation

  • Anwar Ameen Hezam Saeed & Noorfidza Yub Harun & Muhammad Roil Bilad & Muhammad T. Afzal & Ashak Mahmud Parvez & Farah Amelia Shahirah Roslan & Syahirah Abdul Rahim & Vimmal Desiga Vinayagam & Haruna K, 2021. "Moisture Content Impact on Properties of Briquette Produced from Rice Husk Waste," Sustainability, MDPI, vol. 13(6), pages 1-14, March.
    • Handle: RePEc:gam:jsusta:v:13:y:2021:i:6:p:3069-:d:514947
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/13/6/3069/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/13/6/3069/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Andrzej Greinert & Maria Mrówczyńska & Radosław Grech & Wojciech Szefner, 2020. "The Use of Plant Biomass Pellets for Energy Production by Combustion in Dedicated Furnaces," Energies, MDPI, vol. 13(2), pages 1-17, January.
    2. Song, Xiaobing & Zhang, Shouyu & Wu, Yuanmo & Cao, Zhongyao, 2020. "Investigation on the properties of the bio-briquette fuel prepared from hydrothermal pretreated cotton stalk and wood sawdust," Renewable Energy, Elsevier, vol. 151(C), pages 184-191.
    3. Andrzej Kuranc & Monika Stoma & Leszek Rydzak & Monika Pilipiuk, 2020. "Durability Assessment of Wooden Pellets in Relation with Vibrations Occurring in a Logistic Process of the Final Product," Energies, MDPI, vol. 13(22), pages 1-15, November.
    4. Zhang, Wenli & Lin, Nan & Liu, Debo & Xu, Jinhui & Sha, Jinxin & Yin, Jian & Tan, Xiaobo & Yang, Huiping & Lu, Haiyan & Lin, Haibo, 2017. "Direct carbonization of rice husk to prepare porous carbon for supercapacitor applications," Energy, Elsevier, vol. 128(C), pages 618-625.
    5. Lubwama, Michael & Yiga, Vianney Andrew & Muhairwe, Frank & Kihedu, Joseph, 2020. "Physical and combustion properties of agricultural residue bio-char bio-composite briquettes as sustainable domestic energy sources," Renewable Energy, Elsevier, vol. 148(C), pages 1002-1016.
    6. Ríos-Badrán, Inés M. & Luzardo-Ocampo, Iván & García-Trejo, Juan Fernando & Santos-Cruz, José & Gutiérrez-Antonio, Claudia, 2020. "Production and characterization of fuel pellets from rice husk and wheat straw," Renewable Energy, Elsevier, vol. 145(C), pages 500-507.
    7. Wang, Qian & Han, Kuihua & Wang, Peifu & Li, Shijie & Zhang, Mingyang, 2020. "Influence of additive on ash and combustion characteristics during biomass combustion under O2/CO2 atmosphere," Energy, Elsevier, vol. 195(C).
    8. Anna Brunerová & Miroslav Müller & Vladimír Šleger & Himsar Ambarita & Petr Valášek, 2018. "Bio-Pellet Fuel from Oil Palm Empty Fruit Bunches (EFB): Using European Standards for Quality Testing," Sustainability, MDPI, vol. 10(12), pages 1-19, November.
    9. Sansaniwal, S.K. & Pal, K. & Rosen, M.A. & Tyagi, S.K., 2017. "Recent advances in the development of biomass gasification technology: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 72(C), pages 363-384.
    10. Wang, Zhiwei & Lei, Tingzhou & Yang, Miao & Li, Zaifeng & Qi, Tian & Xin, Xiaofei & He, Xiaofeng & Ajayebi, Atta & Yan, Xiaoyu, 2017. "Life cycle environmental impacts of cornstalk briquette fuel in China," Applied Energy, Elsevier, vol. 192(C), pages 83-94.
    11. Pode, Ramchandra, 2016. "Potential applications of rice husk ash waste from rice husk biomass power plant," Renewable and Sustainable Energy Reviews, Elsevier, vol. 53(C), pages 1468-1485.
    12. Gangil, Sandip & Bhargav, Vinod Kumar, 2019. "Influences of binderless briquetting stresses on intrinsic bioconstituents of rice straw based solid biofuel," Renewable Energy, Elsevier, vol. 133(C), pages 462-469.
    13. Anwar Ameen Hezam Saeed & Noorfidza Yub Harun & Suriati Sufian & Ahmer Ali Siyal & Muhammad Zulfiqar & Muhammad Roil Bilad & Arvind Vagananthan & Amin Al-Fakih & Aiban Abdulhakim Saeed Ghaleb & Najib , 2020. "Eucheuma cottonii Seaweed-Based Biochar for Adsorption of Methylene Blue Dye," Sustainability, MDPI, vol. 12(24), pages 1-15, December.
    14. Navalta, Carl John Louie G. & Banaag, Kristian Gregg C. & Raboy, Von Adrian O. & Go, Alchris W. & Cabatingan, Luis K. & Ju, Yi-Hsu, 2020. "Solid fuel from Co-briquetting of sugarcane bagasse and rice bran," Renewable Energy, Elsevier, vol. 147(P1), pages 1941-1958.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Anwar Ameen Hezam Saeed & Noorfidza Yub Harun & Suriati Sufian & Muhammad Roil Bilad & Zaki Yamani Zakaria & Ahmad Hussaini Jagaba & Aiban Abdulhakim Saeed Ghaleb & Haetham G. Mohammed, 2021. "Pristine and Magnetic Kenaf Fiber Biochar for Cd 2+ Adsorption from Aqueous Solution," IJERPH, MDPI, vol. 18(15), pages 1-20, July.
    2. Setter, C. & Oliveira, T.J.P., 2022. "Evaluation of the physical-mechanical and energy properties of coffee husk briquettes with kraft lignin during slow pyrolysis," Renewable Energy, Elsevier, vol. 189(C), pages 1007-1019.
    3. Sivabalan Kaniapan & Jagadeesh Pasupuleti & Kartikeyan Patma Nesan & Haris Nalakath Abubackar & Hadiza Aminu Umar & Temidayo Lekan Oladosu & Segun R. Bello & Eldon R. Rene, 2022. "A Review of the Sustainable Utilization of Rice Residues for Bioenergy Conversion Using Different Valorization Techniques, Their Challenges, and Techno-Economic Assessment," IJERPH, MDPI, vol. 19(6), pages 1-30, March.
    4. Okey Francis Obi & Ralf Pecenka, 2023. "Briquetting of Poplar Wood from Short Rotation Coppice—The Effects of Moisture Content and Hammer Mill Screen Size," Energies, MDPI, vol. 16(3), pages 1-14, February.
    5. Sunny Vaish & Gagandeep Kaur & Naveen Kumar Sharma & Nikhil Gakkhar, 2022. "Estimation for Potential of Agricultural Biomass Sources as Projections of Bio-Briquettes in Indian Context," Sustainability, MDPI, vol. 14(9), pages 1-25, April.
    6. Ahmed M. K. Abdel Aal & Omer H. M. Ibrahim & Ammar Al-Farga & Ehab A. El Saeidy, 2023. "Impact of Biomass Moisture Content on the Physical Properties of Briquettes Produced from Recycled Ficus nitida Pruning Residuals," Sustainability, MDPI, vol. 15(15), pages 1-17, July.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Okey Francis Obi & Ralf Pecenka & Michael J. Clifford, 2022. "A Review of Biomass Briquette Binders and Quality Parameters," Energies, MDPI, vol. 15(7), pages 1-22, March.
    2. Kamal Baharin, Nur Syahirah & Tagami-Kanada, Nami & Cherdkeattikul, Supitchaya & Hara, Hirofumi & Ida, Tamio, 2024. "Effects of repetitive production on the mechanical characteristic and chemical structure of green tea bio-coke," Renewable Energy, Elsevier, vol. 222(C).
    3. Guo, Feihong & Chen, Jun & He, Yi & Gardy, Jabbar & Sun, Yahui & Jiang, Jingyu & Jiang, Xiaoxiang, 2022. "Upgrading agro-pellets by torrefaction and co-pelletization process using food waste as a pellet binder," Renewable Energy, Elsevier, vol. 191(C), pages 213-224.
    4. Rodolfo Picchio & Francesco Latterini & Rachele Venanzi & Walter Stefanoni & Alessandro Suardi & Damiano Tocci & Luigi Pari, 2020. "Pellet Production from Woody and Non-Woody Feedstocks: A Review on Biomass Quality Evaluation," Energies, MDPI, vol. 13(11), pages 1-20, June.
    5. Lacrimioara Senila & Ioan Tenu & Petru Carlescu & Oana Raluca Corduneanu & Emanuel Petru Dumitrachi & Eniko Kovacs & Daniela Alexandra Scurtu & Oana Cadar & Anca Becze & Marin Senila & Marius Roman & , 2020. "Sustainable Biomass Pellets Production Using Vineyard Wastes," Agriculture, MDPI, vol. 10(11), pages 1-21, October.
    6. Ramos, Ana & Monteiro, Eliseu & Rouboa, Abel, 2019. "Numerical approaches and comprehensive models for gasification process: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 110(C), pages 188-206.
    7. Zhong, Hanbin & Xiong, Qingang & Yin, Lina & Zhang, Juntao & Zhu, Yuqin & Liang, Shengrong & Niu, Ben & Zhang, Xinyu, 2020. "CFD-based reduced-order modeling of fluidized-bed biomass fast pyrolysis using artificial neural network," Renewable Energy, Elsevier, vol. 152(C), pages 613-626.
    8. Du, Shilin & Shu, Rui & Guo, Feiqiang & Mao, Songbo & Bai, Jiaming & Qian, Lin & Xin, Chengyun, 2022. "Porous coal char-based catalyst from coal gangue and lignite with high metal contents in the catalytic cracking of biomass tar," Energy, Elsevier, vol. 249(C).
    9. Bassey, Uduak & Sarquah, Khadija & Hartmann, Michael & Tom, Abasi-ofon & Beck, Gesa & Antwi, Edward & Narra, Satyanarayana & Nelles, Michael, 2023. "Thermal treatment options for single-use, multilayered and composite waste plastics in Africa," Energy, Elsevier, vol. 270(C).
    10. Patrik Šuhaj & Jakub Husár & Juma Haydary, 2020. "Gasification of RDF and Its Components with Tire Pyrolysis Char as Tar-Cracking Catalyst," Sustainability, MDPI, vol. 12(16), pages 1-14, August.
    11. Teng, Su & Hamrang, Farzad & Ashraf Talesh, Seyed Saman, 2021. "Economic performance assessment of a novel combined power generation cycle," Energy, Elsevier, vol. 231(C).
    12. Małgorzata Dula & Artur Kraszkiewicz & Stanisław Parafiniuk, 2024. "Combustion Efficiency of Various Forms of Solid Biofuels in Terms of Changes in the Method of Fuel Feeding into the Combustion Chamber," Energies, MDPI, vol. 17(12), pages 1-21, June.
    13. Kim, Jun Young & Kim, Dongjae & Li, Zezhong John & Dariva, Claudio & Cao, Yankai & Ellis, Naoko, 2023. "Predicting and optimizing syngas production from fluidized bed biomass gasifiers: A machine learning approach," Energy, Elsevier, vol. 263(PC).
    14. Sakthivel, Mani & Ramki, Settu & Chen, Shen-Ming & Ho, Kuo-Chuan, 2022. "Defect rich Se–CoWS2 as anode and banana flower skin-derived activated carbon channels with interconnected porous structure as cathode materials for asymmetric supercapacitor application," Energy, Elsevier, vol. 257(C).
    15. Magotra, Verjesh Kumar & Lee, S.J. & Inamdar, Akbar I. & Kang, T.W. & Walke, Pundalik D. & Hogan, Stephanie C. & Kim, D.Y. & Saratale, Ganesh D. & Saratale, Rijuta G. & Purkayastha, Anwesha & Jeon, H., 2021. "Development of white brick fuel cell using rice husk ash agricultural waste for sustainable power generation: A novel approach," Renewable Energy, Elsevier, vol. 179(C), pages 1875-1883.
    16. Ren, Siyue & Feng, Xiao & Wang, Yufei, 2021. "Emergy evaluation of the integrated gasification combined cycle power generation systems with a carbon capture system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 147(C).
    17. Monteiro, Eliseu & Ismail, Tamer M. & Ramos, Ana & Abd El-Salam, M. & Brito, Paulo & Rouboa, Abel, 2018. "Experimental and modeling studies of Portuguese peach stone gasification on an autothermal bubbling fluidized bed pilot plant," Energy, Elsevier, vol. 142(C), pages 862-877.
    18. Andrzej Bochniak & Monika Stoma, 2021. "Estimating the Optimal Location for the Storage of Pellet Surplus," Energies, MDPI, vol. 14(20), pages 1-16, October.
    19. Mariyam, Sabah & Shahbaz, Muhammad & Al-Ansari, Tareq & Mackey, Hamish. R & McKay, Gordon, 2022. "A critical review on co-gasification and co-pyrolysis for gas production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    20. Perkins, Greg & Bhaskar, Thallada & Konarova, Muxina, 2018. "Process development status of fast pyrolysis technologies for the manufacture of renewable transport fuels from biomass," Renewable and Sustainable Energy Reviews, Elsevier, vol. 90(C), pages 292-315.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:13:y:2021:i:6:p:3069-:d:514947. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.