IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v190y2020ics0360544219319887.html
   My bibliography  Save this article

Dynamic simulation of an original Joule cycle liquid pistons hot air Ericsson engine

Author

Listed:
  • Ngangué, Max Ndamé
  • Stouffs, Pascal

Abstract

An Ericsson engine is an external heat supply engine working according to a Joule thermodynamic cycle. It is based on reciprocating piston-cylinder machines. Such engines are especially interesting for low power solar energy conversion, micro-CHP from conventional fossil fuels or from biomass and waste heat recovery. An innovative configuration has been designed where the mechanical pistons are replaced by liquid pistons. The engine is composed of two U-shape tubes partially filled with water, one for the compression spaces and one another for the expansion spaces. A thermodynamic model of the engine is developed. The model takes into account the dynamics of the liquid columns. It is shown that the engine indicated efficiency decreases when the rotation speed increases. The sign of the instantaneous torque on the flywheel changes four times per cycle, calling for a heavy flywheel. When the rotation speed increases above the natural frequency of oscillation of the liquid columns, the influence of the liquid pistons inertia is growing. Its impact is globally opposite to the one of the pressure in the cylinders. So, the effect of the inertia of the liquid columns is to reduce the amplitude of the torque variations.

Suggested Citation

  • Ngangué, Max Ndamé & Stouffs, Pascal, 2020. "Dynamic simulation of an original Joule cycle liquid pistons hot air Ericsson engine," Energy, Elsevier, vol. 190(C).
    • Handle: RePEc:eee:energy:v:190:y:2020:i:c:s0360544219319887
    DOI: 10.1016/j.energy.2019.116293
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544219319887
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2019.116293?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wojewoda, Jerzy & Kazimierski, Zbyszko, 2010. "Numerical model and investigations of the externally heated valve Joule engine," Energy, Elsevier, vol. 35(5), pages 2099-2108.
    2. Creyx, M. & Delacourt, E. & Morin, C. & Desmet, B., 2016. "Dynamic modelling of the expansion cylinder of an open Joule cycle Ericsson engine: A bond graph approach," Energy, Elsevier, vol. 102(C), pages 31-43.
    3. Jokar, H. & Tavakolpour-Saleh, A.R., 2015. "A novel solar-powered active low temperature differential Stirling pump," Renewable Energy, Elsevier, vol. 81(C), pages 319-337.
    4. Markides, Christos N. & Gupta, Ajay, 2013. "Experimental investigation of a thermally powered central heating circulator: Pumping characteristics," Applied Energy, Elsevier, vol. 110(C), pages 132-146.
    5. Solanki, Roochi & Mathie, Richard & Galindo, Amparo & Markides, Christos N., 2013. "Modelling of a two-phase thermofluidic oscillator for low-grade heat utilisation: Accounting for irreversible thermal losses," Applied Energy, Elsevier, vol. 106(C), pages 337-354.
    6. Motamedi, Mahmoud & Ahmadi, Rouhollah & Jokar, H., 2018. "A solar pressurizable liquid piston stirling engine: Part 1, mathematical modeling, simulation and validation," Energy, Elsevier, vol. 155(C), pages 796-814.
    7. Klüppel, Rogerio P. & Gurgel, JoséMaurício M., 1998. "Thermodynamic cycle of a liquid piston pump," Renewable Energy, Elsevier, vol. 13(2), pages 261-268.
    8. Touré, Abdou & Stouffs, Pascal, 2014. "Modeling of the Ericsson engine," Energy, Elsevier, vol. 76(C), pages 445-452.
    9. Van de Ven, James D. & Li, Perry Y., 2009. "Liquid piston gas compression," Applied Energy, Elsevier, vol. 86(10), pages 2183-2191, October.
    10. Van de Ven, James D., 2009. "Mobile hydraulic power supply: Liquid piston Stirling engine pump," Renewable Energy, Elsevier, vol. 34(11), pages 2317-2322.
    11. Creyx, M. & Delacourt, E. & Morin, C. & Desmet, B. & Peultier, P., 2013. "Energetic optimization of the performances of a hot air engine for micro-CHP systems working with a Joule or an Ericsson cycle," Energy, Elsevier, vol. 49(C), pages 229-239.
    12. Markides, Christos N. & Osuolale, Adebayo & Solanki, Roochi & Stan, Guy-Bart V., 2013. "Nonlinear heat transfer processes in a two-phase thermofluidic oscillator," Applied Energy, Elsevier, vol. 104(C), pages 958-977.
    13. Markides, Christos N. & Solanki, Roochi & Galindo, Amparo, 2014. "Working fluid selection for a two-phase thermofluidic oscillator: Effect of thermodynamic properties," Applied Energy, Elsevier, vol. 124(C), pages 167-185.
    14. Yatsuzuka, Shinichi & Niiyama, Yasunori & Fukuda, Kentaro & Muramatsu, Kenshiro & Shikazono, Naoki, 2015. "Experimental and numerical evaluation of liquid-piston steam engine," Energy, Elsevier, vol. 87(C), pages 1-9.
    15. Martins, Matthieu & Mauran, Sylvain & Stitou, Driss & Neveu, Pierre, 2012. "A new thermal–hydraulic process for solar cooling," Energy, Elsevier, vol. 41(1), pages 104-112.
    16. Le Roux, W.G. & Bello-Ochende, T. & Meyer, J.P., 2013. "A review on the thermodynamic optimisation and modelling of the solar thermal Brayton cycle," Renewable and Sustainable Energy Reviews, Elsevier, vol. 28(C), pages 677-690.
    17. Mahkamov, Khamid & Orda, Eugene & Belgasim, Basim & Makhkamova, Irina, 2015. "A novel small dynamic solar thermal desalination plant with a fluid piston converter," Applied Energy, Elsevier, vol. 156(C), pages 715-726.
    18. Markides, Christos N. & Smith, Thomas C.B., 2011. "A dynamic model for the efficiency optimization of an oscillatory low grade heat engine," Energy, Elsevier, vol. 36(12), pages 6967-6980.
    19. Lontsi, Frederic & Hamandjoda, Oumarou & Fozao, Kennedy & Stouffs, Pascal & Nganhou, Jean, 2013. "Dynamic simulation of a small modified Joule cycle reciprocating Ericsson engine for micro-cogeneration systems," Energy, Elsevier, vol. 63(C), pages 309-316.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ngwaka, Ugochukwu & Wu, Dawei & Happian-Smith, Julian & Jia, Boru & Smallbone, Andrew & Diyoke, Chidiebere & Roskilly, Anthony Paul, 2021. "Parametric analysis of a semi-closed-loop linear joule engine generator using argon and oxy-hydrogen combustion," Energy, Elsevier, vol. 217(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chouder, Ryma & Benabdesselam, Azzedine & Stouffs, Pascal, 2023. "Modeling results of a new high performance free liquid piston engine," Energy, Elsevier, vol. 263(PD).
    2. Wang, Kai & Sanders, Seth R. & Dubey, Swapnil & Choo, Fook Hoong & Duan, Fei, 2016. "Stirling cycle engines for recovering low and moderate temperature heat: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 62(C), pages 89-108.
    3. Motamedi, Mahmoud & Ahmadi, Rouhollah & Jokar, H., 2018. "A solar pressurizable liquid piston stirling engine: Part 1, mathematical modeling, simulation and validation," Energy, Elsevier, vol. 155(C), pages 796-814.
    4. Oyewunmi, Oyeniyi A. & Kirmse, Christoph J.W. & Haslam, Andrew J. & Müller, Erich A. & Markides, Christos N., 2017. "Working-fluid selection and performance investigation of a two-phase single-reciprocating-piston heat-conversion engine," Applied Energy, Elsevier, vol. 186(P3), pages 376-395.
    5. Tan, Jingqi & Wei, Jianjian & Jin, Tao, 2020. "Electrical-analogy network model of a modified two-phase thermofluidic oscillator with regenerator for low-grade heat recovery," Applied Energy, Elsevier, vol. 262(C).
    6. Taleb, Aly I. & Timmer, Michael A.G. & El-Shazly, Mohamed Y. & Samoilov, Aleksandr & Kirillov, Valeriy A. & Markides, Christos N., 2016. "A single-reciprocating-piston two-phase thermofluidic prime-mover," Energy, Elsevier, vol. 104(C), pages 250-265.
    7. Ahmadi, Rouhollah & Jokar, H. & Motamedi, Mahmoud, 2018. "A solar pressurizable liquid piston stirling engine: Part 2, optimization and development," Energy, Elsevier, vol. 164(C), pages 1200-1215.
    8. Christoph J.W. Kirmse & Oyeniyi A. Oyewunmi & Andrew J. Haslam & Christos N. Markides, 2016. "Comparison of a Novel Organic-Fluid Thermofluidic Heat Converter and an Organic Rankine Cycle Heat Engine," Energies, MDPI, vol. 9(7), pages 1-26, June.
    9. Ngwaka, Ugochukwu & Wu, Dawei & Happian-Smith, Julian & Jia, Boru & Smallbone, Andrew & Diyoke, Chidiebere & Roskilly, Anthony Paul, 2021. "Parametric analysis of a semi-closed-loop linear joule engine generator using argon and oxy-hydrogen combustion," Energy, Elsevier, vol. 217(C).
    10. Kirmse, Christoph J.W. & Oyewunmi, Oyeniyi A. & Taleb, Aly I. & Haslam, Andrew J. & Markides, Christos N., 2017. "A two-phase single-reciprocating-piston heat conversion engine: Non-linear dynamic modelling," Applied Energy, Elsevier, vol. 186(P3), pages 359-375.
    11. Touré, Abdou & Stouffs, Pascal, 2014. "Modeling of the Ericsson engine," Energy, Elsevier, vol. 76(C), pages 445-452.
    12. Nikunj Gangar & Sandro Macchietto & Christos N. Markides, 2020. "Recovery and Utilization of Low-Grade Waste Heat in the Oil-Refining Industry Using Heat Engines and Heat Pumps: An International Technoeconomic Comparison," Energies, MDPI, vol. 13(10), pages 1-29, May.
    13. Rui F. Costa & Brendan D. MacDonald, 2018. "Comparison of the Net Work Output between Stirling and Ericsson Cycles," Energies, MDPI, vol. 11(3), pages 1-16, March.
    14. Komninos, N.P. & Rogdakis, E.D., 2018. "Numerical investigation into the effect of compressor and expander valve timings on the performance of an Ericsson engine equipped with a gas-to-gas heat exchanger," Energy, Elsevier, vol. 163(C), pages 1077-1092.
    15. Creyx, M. & Delacourt, E. & Morin, C. & Desmet, B., 2016. "Dynamic modelling of the expansion cylinder of an open Joule cycle Ericsson engine: A bond graph approach," Energy, Elsevier, vol. 102(C), pages 31-43.
    16. Langdon-Arms, Samuel & Gschwendtner, Michael & Neumaier, Martin, 2018. "A novel solar-powered liquid piston Stirling refrigerator," Applied Energy, Elsevier, vol. 229(C), pages 603-613.
    17. Markides, Christos N. & Gupta, Ajay, 2013. "Experimental investigation of a thermally powered central heating circulator: Pumping characteristics," Applied Energy, Elsevier, vol. 110(C), pages 132-146.
    18. Tang, K. & Feng, Y. & Jin, S.H. & Jin, T. & Li, M., 2015. "Performance comparison of jet pumps with rectangular and circular tapered channels for a loop-structured traveling-wave thermoacoustic engine," Applied Energy, Elsevier, vol. 148(C), pages 305-313.
    19. Aliaga, D.M. & Romero, C.P. & Feick, R. & Brooks, W.K. & Campbell, A.N., 2024. "Modelling, simulation, and optimisation of a novel liquid piston system for energy recovery," Applied Energy, Elsevier, vol. 357(C).
    20. van Kleef, Luuk M.T. & Oyewunmi, Oyeniyi A. & Markides, Christos N., 2019. "Multi-objective thermo-economic optimization of organic Rankine cycle (ORC) power systems in waste-heat recovery applications using computer-aided molecular design techniques," Applied Energy, Elsevier, vol. 251(C), pages 1-1.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:190:y:2020:i:c:s0360544219319887. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.